Document posting issue in CORK

Hi Everyone,
We post the confirmation for the process order through CORK transaction.
My control key has been configured for Auto GR and material to be issued are properly maintained for Backflushing.
Now I go into CORK, into goods movement screen edit material component data and save the confirmation. I get the message that Order is Confirmed. But When I display the order cofirmation through CORT, system only shows the confirmation, no goods movements are posted.
I cancel the confirmation through CORS.
This time I confirm the transaction through COR6N, edit the material components in Goods Movement screen and Save. This time order is confirmed and goods movements are also posted.
Our users are trained to confirm process order through CORK. This issue started from yesterday. Before that CORK was working fine and goods were getting posted without any issues.
Please guide me if I am doing anything wrong anywhere.
Thanks,
Parashar.

1. Using CORS when you are saving : please have a look at bottom left corner of the window to see if there is any message displayed (mostly it will be there - if yes click it find the error message - and post it here or with error message you can yourself do further investigation).

Similar Messages

Physical inventory and Document posting issue

hi .,
The PI document was printed out and was to contain 3 different materials. But the PI document showed only Sl.No.3. Sl.No.1 and Sl.No.2 were not displayed.
When we go to MI03, all the there items are displayed in the PID No.xxx1234.
Sl.No.2 and Sl.No.3 are shown as COUNTED and ADJUSTED and Sl.No.3 has a status as NOT COUNTED.
The Planned Count date on the PID No.xxx1234 is 07/18/2006
When we try to do a PI Count using MI04 for Sl.No.3 giving the PID No.xxx1234 leaving the year blank, the following <b>messages.,
" Please reconcile count date w.planned phy.invent date 07/18/2006 " with message number M7 730 as a warning.
After the warning message ,we get the next warning message " Document posting in different periods" and finally next we get an ERROR message with the text " A COUNT CAN ONLY BE ENTERED FOR PERIOD 06/2007</b>.
<b>We are on 4.6C with SP51. FY starts Feb. Our Current Period of control record is now 03/08</b>
Has anyone come across similar errors and if yes, what was the action action.
Is there a SAP Note to recitify this error or do we have to open a session with OSS to generate a specific solution for this error.
All help is much appreciated.
Thanks

Hi All,
The way I see this issue it's actually a lock. By that I mean, there's an open PID which can't be posted because it belongs to the previous period which is locked. Also a new PID can't be created because of this open PID.
Hence I suggested to go to MI02 and delete that particular line item. This deletion would not affect the other line items in the same PID. (Tip : There's a deletion indicator in front of the line item can be selected to delete a line item of the PID).
Then create a new PID. As far as the status of the inventory in 2006 is concerned it would be not counted.
Pl. opine.
Thanx,
Pravin

Photoshop CS4 new document dialog issue...

http://img50.imageshack.us/img50/7835/optionpu6.gif
Can this Photoshop CS4 new document dialog issue be improved? Info in the pic.

there's a feature request section at the top of the fourm allen. these kinds of posts should be done in there, so the programmers and engineers at adobe have them all in one place.

Mass reversal of documents posted using F.13

Hi Friends,
We have some GR/IR open items as on 28.02.2010, and we ran the F.13 program to clear those line items with clearing date 03.03.2010. Since all those documents cleared on 03.03.2010. In total there were 1000+ documents posted by the program.
But unfortunately user has not entered the posting date range in F.13 selection screen as 01.03.2010 to 03.03.2010. Because of this, documents related to FEB period also cleared in march and if we run the FBL3N with open item key date 28.02.2010, all items are showing open items. which is correct from the system perspective.
But we need clear, those documents posted prior to 01.03.2010, with clearing date 28.02.2010 only.
In FB08, mass reversal option, we can reverse multiple documents, only in case of open items, but not the cleared items.
My requirement is that, is there any program / way to reverse the cleared items, posted by using F.13.
We cannot use FBRA, since we have 1000+ docs.
Please advise.
Thanks,
Srinu

Hi Joshi,
Thanks for your prompt reply.
I have acheived my target, using LSMW batch input recording method with tcode FBRA to reset the cleared items.
After that, i went to F.80 and given the doc number series and did the mass reversal.
Again i did F.13, given end posting date as 28.02.2010, and clearing date 28.02.2010 and executed.
This resolved my issue.
Thanks,
Srinu

UOM group error while material document posted throgh BDC( MB01)

Hi All,
we are facing issue while posting material through MB0-goods reciept
error "UOM group not maintaineed for 'XXXXX" material" for some line items,
and i have checked in material master data, UOM group not maintained for some material,
even after maintaind UOM group for those material's still we are facing same problem,
as i checked in BDC code there is no validation for UOM group,
if we posted same PO manual, document posted successfull,
please suggest me.....why this error message coming eventhogh UOM group mainted?
Regards,
Suresh.D

check this link:
Updating Function module for Material master (UoM)
BAPI for MIGO
cheers
Aveek

Parked document posting - Budget period screen field error

Dear Experts
We are working on FM BCS, While posting of the parked document through Transaction FBV0 we are getting the below error message.
"Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
Message no. 00349
Diagnosis
The specified field does not exist on the screen.
Procedure
Check your batch input data
We gone through the error help information and checked field status groups and found everything is fine.
We can able to post direct invoices without getting any errors. The above error triggers only in the scenarios of " parked document posting".
Kindly suggest....
Thanks in advance.
Regards
Rao

Hi Mar Novalbos
Great, the note was helped a lot...
The issue has been resolved.
Thanks for your kind support as usual....
Regards
Rao

Unable to view documents posted in SAP

Hi,
I am unable to view documents posted in SAP.
Steps that i folllow:
1) I enter the tcode fbl1n.
2) Fill the details and execute
3) Click on the document number
4) Click on Environment -> Additional Assigment->Object Link
After it displays error message You are not authorized to use transaction SDV
I was able to view documents till yesterday.
I have IXOS client installed on my system.
Kindly let me know your valuable suggestions
Regards,
Yasmin

I pressume that this is not authorization issue.
Try check this..
Does the parameter for you is same like your teammate? (Transaction SU3)
To access the IXOS is there any custom table maintained to enter authentic user ID. Likely to chek with ABAPer.
In order to reset your user buffer go to SU56 and from the menu you will have option to rest the buffer. Alternatively you can get Security guys to do it in SU01(depends on table entry)/PFCG/PFUD...
Regards,
Arpan Paik

Automatic clearing for document posted via FBB1 with foreign currency

Hi SAP Gurus,
Can anyone help to explain on why does the document posted in FBB1 with document currency USD was auto cleared even without satisfying the rule in OB74. But when the document currency is SGD it can be automatically cleared.
Scenarion is as below
OB74 set up:
   Accty type: S
From acct: 12000
To account: 12000
Criterion 1: Business area
Criterion 2: Assignment
G/L account : 12000
Account currency : SGD
Post JV document via FBB1:
     Dr 12000
     Cr 20000
     Document curreny : USD ; amount: 0
     Local currency: SGD ; amount: 200
     Assignment: Test A
     Business area: 'blank'
*When I run F.13 above document was cleared and the clearing doc contains below
       Dr 20000
       Cr 12000
But when I post in FBB1 with same entries as above, only changing the document currency to SGD it will not be cleared via F.13.
Appreciate your explanation on why does above scenario happened.
Thank you in advance.

HI,
while posting the entry through FBB1 then system will not consider the exchange rates as per ob08 and etc.,
you can define the local and foreign currency values as per your wish while posting the FBB1.
I hope above will clear you issue. Thank you.
Reg
Madhu M

Accounting status not "documents posted" trip can't be changed

Hi Experts,
Can you please help me on this issue ? please provide your valuable inputs ?
when user is trying to create an expense report from travel plan, getting error message , Accounting status not ' documents posted ' trip can't be changed.
Thanks in Advance.

HI Lakshmi,
Once posting is done you can't edit expense as per standard. If they want to edit expense they should do enhancement.
Regards,
Nischitha

Report on documents posted with user name-urgent

Hi All
Is there any report available to find out the documents posted with user name on any one particular date.
This req. is for a audit purpose.
Thks & regards
nivi

Hi Hein
They dont want to use any query and generate report. There are billing issues. They are enquiring whether standard report or transaction code is there to track the same.
Anyway Thks for your inputs.
Thanks & Regards
nivi

F.13 - FB1S - Automatic Compensation Document post differences.

Hello!
We have an issue, it´s not a problem but it is something different going on when posting automactic compensation.
The issue is:
User run T-code F.13 for automatic compensation.
F.13 uses transaction FB1S to create and post compensation documents, for our case it creates a document type AB.
What happen is: the document posts clearing line items in the right manner (we don´t have a problem with that) but sometimes besides the normal postings the compensation document created by this process posts a Debit with value 0,00 to a G/L account, sometimes it posts a Credit 0,00 in the same account or sometimes it does not post any value in this same G/L account.
Has anybody ever seen this kind of situation?
Is there something in customizing where I can check posting process for transaction F.13 or FB1S or posting process for AB documents type?
Thank you!

This post occurs to ajust foreign currency diferences.

Activity report in REM for each document posting

Dear All,
Please help me with , how to get the Activity report for each & every for MFBF document posted.
BR,
Subbu.

Dear Subbu,
The report MF12 can help you in getting the postings that has happened for a plant and using the type
B : Backflush
Goods receipt, goods issue and activity backflush.
Check and revert back.
Regards
Mangalraj.S

Is it possible to reverse a planning document posted using KP98?

Is it possible to reverse a planning document posted using KP98?
The planning data in plan 0 has been overwritten with actuals for P1-12 in error does anyone know how to reverse this posting?
Thanks for any help!

hi,
I have tried this and worked with my system.
Try to execute KP98 transaction with reference actual period which has no posting(future period-01/2011) and in "reser/overwite" mode.
Initially try with single cost center/cost element value.
This will fix your issue.
regards,
ashok
Edited by: AshokFICO on Feb 5, 2010 12:48 PM
there is no direct t-code to reverse posted plan data exclusively for cost centers.SAP has this function to delete all plan data in integrated module so go with above response.

Authorization for Task - Manual Document Posting

Hi All
We have have few tasks in our consol monitor like data collection, manual posing, validation, reclass etc. I want to restrict authorizaiton to users based on company and tasks. When I do so its perfectly working except for manual posting task. The system is allowing user to post manual posting of other company in which the user is not supposed to. I am wondering. The system is just ignoring manual posting task alone. Is there any tricky way to solve the issue for manual posting task?
I am currently using the objects R_UGMD_CHA, R_UGMD_SNG, R_UC_TASK combinations. It works fine except for manual document posting task. If any one got any suggestions, let me know to fix this problem.
Regards
A.Bharath

Note 610621 - SEM-BCS: Authorization check for the Manual Posting
During the execution of the Manual Posting the system by mistake checks the authorization for consolidation groups or consolidation units against value '#'. The system should check against the initial value instead.
For example, if you start a Manual Posting task, which posts on posting level 10, for a consolidation unit 'xyz', the system checks the authorization against the following values:
Consolidation unit = 'xyz'
Consolidation group = '#'
Instead of this, the system should check against the following values:
Consolidation unit = 'xyz'
Consolidation group = initial value
Other terms
Manual Posting, authorization check
Reason and Prerequisites
This problem is caused by a program error

Stop document posting while doing LO Initialization

Hi All,
I am using the "Delta Queue" method. Is it really necessary to stop the document posting while we do the Setup table filling?
I am asking this because, I tested it in my quality system and found the following:
- Once you clear RSA7, LBWQ & Setup table, you can start filling the setup table with OLI*BW or from SBIW.
- Any new document posted while filling the setup table goes to LBWQ.
- New documents posted while filling setup table are not collected into the setup table.
- Once filling is done, you can run the Init, and after that delta queue is created in RSA7.
- You can run the update job, to get the documents posted while filling the setup table into delta queue and the get to BW by running delta extraction.
So, if I follow these steps and not ask the users to stop document posting, will I still lose some data in BW?
Pls advise friends...
Regards,
Bijesh

Hi,
It's not a requirement that the setup tables be loaded during "quiet time" on the source system, it merely a recommendation from SAP. The reason that most like to use a "quiet time" is to avoid slower response time by normal business day transactions and the potential for losing data.
If you execute an Init w/o Data Transfer InfoPackage on your BW environment just after you start xecuting the setup tables you won't risk a loss of data. You may, however, have an small amount of overlap of data. If the target for the DataSource is overwrite, then there is no issues. If it's cumulative, then you're going to have to delete the duplicate entries from the first delta PSA.
The optimal time to do the setup jobs is when you can ensure there are no transactions or batch jobs updating the tables. Since this is an impossibility with some companies, especially global companies that use a single source instance, then performing the setup when you can get the quietest time possible is your best alternative.
For more info check the below blog:
/people/dennis.scoville4/blog/2009/06/16/sap-bw-and-source-system-initialization
Cheers,
VA

Document posting issue in CORK

Similar Messages

Maybe you are looking for