Documentation in SAP Solution Manager.
Hi Experts,
we are looking for documentation (configuration Doc.) for ISU billing in sap solution manager.
could any one please tell me the required steps to get the same.
Thanks & regards
Arpan Saini.
Thank you Shafi for your response.
I have previously looked at the note you suggest but it only seems to contain, for the ERP 6.0 HR module , the support pack 29 (along with SPs for other applications). I've also looked at notes 1156006 for stack 13 which also contains SP29, note 1129210 for stack 12 which contains SP27. These are the only Support Stacks I can find that contain any HR SPs above 24. Note 1081261 for stack 11 has SP22 which is not applicable as we are at SP level 24.
I cannot seem to find any documentation for any of the other support packs 25, 26, 28, 30-34. I know the one for 35 is supposed to be released today so hopefully there will be something put out for that one soon.
Any other help you can provide to point me to the documentation for the other SPs for ERP 6.0 HR would be greatfully appreciated. Again, thank you for your time in responding.
Samantha
Similar Messages
-
Tecnical Documentation SAP Solution Manager
Hi all,
I'm new to the Solution Manager and I'm looking for any technical documentation that helps to get started writing ABAP code for the Solution Manager.
I'm looking for a data model (tables) or class mode....l all that stuff that helps...
Thank's for you help,
UrsHi Kuki,
you might try looking at http://service.sap.com/instguides -> SAP Solution Manager.
best regards,
-David. -
Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"
I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PMHi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram -
How to Unlock the Object in SAP Solution Manager
Hi all,
Iam trying to Upload the TS into Solution manager, but the Project Documentation TAB is locked by another User.So i am unable to get ADD button enable
I dont have access to SM12 or SE03. How to Unlock this
RegardsThis is not the right forum to ask your doubt. Post this in Solution Manager forum
SAP Solution Manager
Regards,
Prateek -
Document Management in SAP Solution Manager
Hi All,
I would like to know If you are using SAP Solution Manager as a central tool for overall Documentation Management?
Could you please share some information about your solution?
Many thanks.
Regards,
RidouanHi Ridouan,
For this i suggest two options:
*Use Template Projects to manage templates:
http://wiki.sdn.sap.com/wiki/display/SM/Template+Projects
*Use Solutions to re-use some structures:
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/87/38037ccd314c9aac4f026f1ba34558/frameset.htm
further about document management: http://help.sap.com/saphelp_sm71_sp01/helpdata/en/46/87f790498b5cede10000000a114a6b/frameset.htm
Kind regards
Fabricius -
Configuration for Central Monitoring System in SAP Solution Manager.
Hi Folks,
I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
There are couple of items on which I am really confused.
In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
Can you guys please help me to configure properly?
One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
Also, is there any document which clearly explains the setup of Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
I have SAP Solution Manager 7.0 EHP1.
Thanks.
JenniferHi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny -
SAP XI scenarios (SAP Solution Manager and SAP ECC 6.0)
Hi!
I have a SAP Solution Manager System 7.0 (ABAP+Java) and SAP IDES ECC 6.0 (ABAP).
Futhermore I have SAP NetWeaver 7.0 with SAP XI 7.0.
Which scenarios can I implement with these systems and where can I find the appropriate documentation?
- Proxy to Proxy
- IDOC/ALE
- Webserice
- other scnenarios (???)
Thank you very much!
regards
HolgerHi Holger,
Please do search in SDN you might get more.......
Proxy to Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Proxy to File
File to R/3 via ABAP Proxy - File to ABAP Proxy
IDOC/ALE
Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
Few other scenarios :
File to R/3 via ABAP Proxy - File to ABAP Proxy
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1) - File to File Part 1
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2) - File to File Part 2
Convert any flat file to any Idoc-Java Mapping - Any flat file to any Idoc
RFC Scenario using BPM --Starter Kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
Dynamic File Name using XI 3.0 SP12 Part - I - Dynamic File Name Part 1
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - Dynamic File Name Part 2
The specified item was not found. - Dynamic Mail Address
Understanding message flow in XI - Message Flow in XI
Walkthrough with BPM - Walk through BPM
Schedule Your BPM - Schedule BPM
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
The specified item was not found. - Maintain RFC destination centrally
Triggering e-Mails to Shared folders of SAP IS-U - Triggering Email from folder
Outbound Idoc's - Work around using "Party"? - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
The specified item was not found. - Testing of integration process
The specified item was not found. - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
The specified item was not found. - Alert Configuration
The specified item was not found. - Trouble shoot alert config
Executing Unix shell script using Operating System Command in XI - Call UNIX Shell Script
Overview of Transition from Dev to QA in XI - Transport in XI
Using ABAP XSLT Extensions for XI Mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
IDOCs (Multiple Types) Collection in BPM - Collection of IDoc to Single File
XI : Controlling access to Sensitive Interfaces - Controlling access to Sensitive Interfaces
The specified item was not found. - The same filename from a sender to a receiver file adapter - SP14
Payload Based Message Search in XI30 using Trex Engine - Payload Based Message Search in XI30 using Trex Engine XI : Configuring CCMS Monitoring for XI- Part I - XI : Configuring CCMS Monitoring for XI- Part I
The specified item was not found. - XI: HTML e-mails from the receiver mail adapter
Thanks
Prabhakar -
SAP Solution Manager ABAP or JAVA or ABAP+JAVA ?
Hello.
I want to install Solution Manager for use Maitenance Optimizer ( accept download baskets, configure other SAP system, support packages ...).
I wanted to know if installing ABAP instance is enough? or I have to install Java also?
Regards,
AmitAmit,
SAP Solution Manager is separate application. You need ABAP+Java stack to use Maintenance Optimizer.
Please read documentation from following link
[http://www.service.sap.com/solutionmanager]
Best Luck,
Digesh Joshi -
Configure ECC 6.0 EHP4 in SAP Solution Manager SP15
Hi all,
I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
Is someone know if it is normal or if it is necessary to patch solution manager ?
Is ther a documentation existing to configure ERP EHP4 systems ??
Thanks for your answer.
Regards
GerardI have not seen any document to configure EHP4 systems specfically.
I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
You might want to have a glance over some notes
Note 1283307 - SMSY: Product version cannot be determined correctly
Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
Note 1320545 - Updating the product version in SMSY -
Red EWA alert in SAP Solution Manager Functionality
Hi Experts,
We found a red alert in Service Plan and General Infrastructure in EWA under SAP Solution Manager Functionality for Solman system. The error is as follows.
Service Data Download Center
SDCCN settings are not maintained -
Service Plan
RFC connection errors to SAP backend system
General Infrastructure
Not all services in ICF required for Solution Documentation Assistant are active
RFC connection errors to SAP backend system
Number range check inconsistent
RNOTIFUPDATE01 is currently not scheduled Hourly
& settings are inconsistent
Could anyone provide a solution to rectify these red alerts.
Thanks & Regards,
Sundara.SDCCN:
Go to tx SDCCN - Goto - Settings - Task-specific
Make sure all settings are correct.
Service Plan:
Check your RFC's to satellite systems in SMSY.
General Infrastructure:
Go to transaction SICF and activate all nescesarry services.
Hope this helps!
Regards,
David -
SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)
Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
MarcoHi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini -
How to work sap solution manager
< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. please search first. >
Hi experts,
can anybody what is the use of sap solution manger and how its work.
Regards,
arti singhThe SAP Solution Manager supports you throughout the entire life-cycle of your solutions, from the Business Blueprint to the configuration to production processing. It provides central access to tools, methods and preconfigured contents which you can use during evaluation, implementation and operational processing of your systems.
Features
Implementing and Upgrading SAP Solutions
Central access to all tools for your project (Project Administration, Business Blueprint, Configuration, Test Workbench, create Group Rollout templates)
Central management of all information for your Project (roadmaps, system landscape, project documentation)
Compare and synchronize customizing in different SAP components
Solution Monitoring
Central System administration
Analysis of your system landscape with Service Level Reporting
Real-time System Monitoring
Business process monitoring
Services and Support
Access to programs and Services to monitor and optimize the performance and availability of your system landscapes, and minimize risks when running your systems
Service Desk
Solution support with workflow to Create and Process Problem Messages
Change Management
Manage change requests, with workflow to trace and audit changes and transports in your system landscape with Change Request Management. -
How to copy SAP Solution Manager?
Hi experts,
I'm searching a manual, which explains a system copy for Solution Manager 7.0 EhP 1. I can't find such a document in the SAP Marketplace. Can anybody help me?
Thanks and best regards
MaxHello Max,
Please see the following URLs/Notes which will explain on system copy for SOLMAN.
http://www.service.sap.com/instguides
-> SAP Components -> SAP Solution Manager --> Select the relevant release and you will find installtion, upgrade
and configuration guides.
Please refer to the below link for more infromation.
http://service.sap.com/solutionmanager
Please also check if below notes:
659509 ORACLE: Special installation and system copy (point 3:Required documentation)
492051: Moving solutions to a new Solution Manager
Thanks,
Mark -
How to config and implement SAP Solution Manager
Hi,
We have to config and implement SAP Solution Manager.
So plz suggest me the steps to be taken.
From where we have to start config and implement SAP Solution Manager.
Regards,
Radhey ShyamHello Radhey,
I would suggest you take advantage of the documentation and simulations available in the Solution Manager Ramp -Up Knowledge Transfer area - http://service.sap.com/rkt-solman.
The areas are broken down by section and links such as Overview Build, Config, Deploy, Operation, Optimization, etc are provided. There are many hours of tutorials.
If you are just starting out, this information is invaluable.
Regards,
Paul -
Update SAP Solution Manager 7.0 to EHP 1 with SP 19
Hi!
We use SAP Solution Manager 7.0 (SP 17) on Linux with Oracle
and would like to update this system to EHP1 SP19.
First of all I installed ST-ETP Add-On via SAINT to call the system "Enteprise Edition"
Now I have few questions about the further procedure:
1) can this update from SP 17 --> SP 19 be implemented via SAINT and with one step?
2) what is the documentation of this process?
3) are there any restrictions about Linux and 32 Bit?
Thank you very much!
regardscheck this Note #1276022, it contains all crucial information you will need
Maybe you are looking for
-
Hp LaserJet 1022NW on wired netvork go to sleep
My god old LaserJet 1022NW is givning me some problems, its in a working wired network, and i can print in about 5 minutes after start. but after that time, the printer is not responding. Then i can´t see it by browser and ip. my computer says its
-
How do I get cfchart to display in CF 10 developer version?
Just installed CF10 over CF8 on XP Pro test machine, upgraded to Update 08 and cfchart no longer displays. The image is generated in the charting cache (C:\ColdFusion10\cfusion\charting\cache) but doesn't display on the generated page. All I get i
-
Is anyone having problems with apple mail since upgrading to Yosemite?
MacBook Pro 15", mid 2012 running Yosemite 10.10.1 - ever since upgrading to Yosemite, I have a problem with Apple Mail which is that the from address persists on my screen after I close the email. I have to quit mail and sometimes even restart to g
-
Problem uploading pics to twitter.
A while ago I could upload pictures to twitter with my blackberry 8900, but later I couldn't, I also can upload photos to facebook, send it by e-mail, etc... But twitter always says: "Twitter services are currently unavailable Do you want to retry?"
-
My USB Apple Aluminum Keyboard is not responding during Bootcamp Install!
I am going crazy, I have had the worst experience with this Bootcamp install which is supposed to be so easy, resulting in Apple replacing my MAC pro, and I still can't get it to work on the new machine. My first problem was using a Windows XP Pro di