Configuration for Central Monitoring System in SAP Solution Manager.
Hi Folks,
I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
There are couple of items on which I am really confused.
In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
Can you guys please help me to configure properly?
One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
Also, is there any document which clearly explains the setup of Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
I have SAP Solution Manager 7.0 EHP1.
Thanks.
Jennifer
Hi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny
Similar Messages
-
Configure ECC 6.0 EHP4 in SAP Solution Manager SP15
Hi all,
I just upgrade a system from R/3 4.6c to SAP ECC 6.0 EHP4 NW 7.01. I want to configure the system in SAP Solution Manager just upgraded to SP15. But I don't understand how I must to configure the system and to assign a logical component. It seems not to be the same possibilities between System configuration and Logical configuration.
For system configuration I can choose product version EHP4 FOR SAP ERP 6.0 / NW7.01 and a full list of usage type
For logical component I only found product SAP ERP ENHANCE PACKAGE and a very short list of version and usage type (??)
Is someone know if it is normal or if it is necessary to patch solution manager ?
Is ther a documentation existing to configure ERP EHP4 systems ??
Thanks for your answer.
Regards
GerardI have not seen any document to configure EHP4 systems specfically.
I do not think, Solman SP15 should create any problem in that. But, since you are upgrading your landscape to EHP4, so why leave solman to SP15 instead of Ehp1 (SP18/19/20)...
You might want to have a glance over some notes
Note 1283307 - SMSY: Product version cannot be determined correctly
Note 1301106 - SMSY: Enhancements and errors in Enhancement Package 1
Note 1320545 - Updating the product version in SMSY -
Configuration information is only available in SAP Solution Manager.
Configuration information is only available in SAP Solution Manager.
I always read about this.
But how find it in the sol man system actually?
Thanks very much.Hi
do you mean IMG configuration of ABAP scenarios?
when you create the project in solution manager you can see all its configuration information on the tabs(TA Solar_project_Admin)
for the ABAP scenarios, executable configuration files (IMGs) are available. SAP Solution Manager has the capability of executing the ABAP scenarios IMG files during the configuration and management of the system landscape(TA Solar02)
I could suggest please go the link service.sap.com/solutionmanager.for needed informantion
Jansi -
Java Stack for Central monitoring system
I believe for central monitoring with only ABAP stack is sufficient to monitor both remote ABAP and JAVA stacks. For this purpose CCMS and GRMG can be used. My questing is there any need to have JAVA stack in central monitoring system? If yes, what are the things that only ABAP stack can not do alone and JAVA stack is required in central monitoring system?
Hi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny -
Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0
Hi,
I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
DB Detail
SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
Thanks,
KaleelDear Mohamed,
I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
If you are "Upgrading" one system from Solution Manager 7.0 to EHP1 then all the messages are preserved.
If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
Please see the document [SAP Solution Manger- Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
Hope this helps to clarify.
Regards,
Paul -
How to set up approval process for test case in SAP solution manager?
Hi Experts,
We need to setup a 2 level approval process for test case documents in SAP Solution Manager.
e.g. If test case document is uploaded for transaction "MM01" then first it will go to Reviewer1. Once Reviewer1 approves it , should go to Reviewer2.
Adn finally once reviewer2 approves it , it will be complete.
What are the required configurations and steps for approval process setup? It will be helpful if screenshots and detailed steps are provided.
Thanks.
regards,
SanjanaHi,
the above requirement we are going develop add on.below code is there. in this code how we can set for line level amount instead of document total amount
Private Function GetCondition(ByVal sCondition As String) As ApprovalTemplateConditionTypeEnum
Try
Select Case sCondition
Case "Deviation from Credit Limit"
Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromCreditLine)
Case "Deviation from Commitment"
Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromObligo)
Case "Gross Profit %"
Return (ApprovalTemplateConditionTypeEnum.atctGrossProfitPercent)
Case "Discount %"
Return (ApprovalTemplateConditionTypeEnum.atctDiscountPercent)
Case "Deviation from Budget"
Return (ApprovalTemplateConditionTypeEnum.atctDeviationFromBudget)
Case "Total Document"
Return (ApprovalTemplateConditionTypeEnum.atctTotalDocument)
End Select
Catch ex As Exception
MsgBox(ex.Message())
End Try
End Function
Please guide me.
Regds,
Samapth Kumar. -
Installation of SAP Solution Manager 4.0
Hello!
I have one question regarding the installation of SAP Solution Manager 4.0
Do I need to consider the Unicode-installation of SAP Solution Manager 4.0?
We use SAP Solution Manager just for the following scenarios:
<b>Maintenance Optimizer</b> (to patch the existing SAP-systems from SAP Solution Manager)
and <b>monitoring-functionality (CCMS)</b>
Thank you!
AxelHi,
Thank you very much to Dolores Correa and Markus Döhr for replying for my querry.FYI-My system users only use English and I do not have any problem of chineese.My problem is that I am not able to install Non-unicode kernel.The Solution manager installation program(sapinst) only takes Unicode kernel CD whereas my satellite systems are non-unicode.Now if unicode solution manager can work with non-unicode satellites,then the problem is solved.
Warm Regards,
Syamkrishnan -
SAP SOLUTION MANAGER 7.0 EHP
Hi
We have a test server in which solman is installed with SP level 12 now we want to upgrade it to SAP SOLUTION MANAGER 7.0 EHP 1 Support Package Stack 18 (11/2008) .
My questions
1:Is it possible to directly upgrade from SP12 to EHP 1 Support Package Stack 18
Iam aware of that we need to update the kernel to 7.01 and SPAM to at least 35 patch level apart from these what are the other prerequisties i need to follow
Regards
UdayHi
I was checking at Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade (SPS18,19) in contents
5:Download by stack download (optional)
Log on to SWCenter on SAP Service Marketplace:
Support Packages and Patches -> Entry by Application Group -> SAP Technology Components -> SAP Solution Manager -> SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-19 (03/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
-> SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 19 (03/2009)
Source stack : 18 (11/2008)
Iam at stacklevel 17 and could not find stack level 17 in Source stack
should i select Source stack : 18 (11/2008) and Target stack : 19 (03/2009) ?
but my system is at stacklevel 17 only
when i leave source stack blank and select target as 19 i could see lot of file which i have applied are in the list
Please help me out
Note: Iam not using MOP
Regards
Uday -
Competitors for SAP Solution Manager within central system monitoring
Hello!
We currently use SAP Solution Manager (CCMS monitors from RZ20) for the central system monitoring for several SAP systems.
Are there some other tools/competitors that can also serve as central platform for system monitoring of several SAP systems?
(e.g. HP OpenView).
Many thanks!Hello,
You may want to take a look into the EarlyWatch Alert report.
It's a weekly report that gives information about many different areas of your systems and helps you to maintain them. It helps to detect problems before they occur by analysing trends on your systems and alerting about it. It definitely may work taking a look into it: service.sap.com/ewa.
It does not have an additional cost, all you need is a solution manager.
Regards,
Daniel.
Edited by: Daniel Nicol on Apr 11, 2011 8:04 PM -
"No CEN system configured for CCMS monitoring" message
Hello,
When I want to use the reports option on central mode I receive this message:
"No CEN system configured for CCMS monitoring"
Can someone please guide me through this configuration?
Thank you in advance,
RoyHi Roy,
Monitoring Setup Guide will tell you how to setup CEN
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c
Regards
Juan
Please reward with points if helpful -
Solution Manager and external Central Monitoring system
We have a Solution Manager system SOL and a Central Monitoring system
CEN. The monitored system SDS is configured to report CCMS data to CEN
and I wanted SOL to be able to access this data. After configuring SDS
to CEN, CEN that the following entry in RZ21:
SDS#SDS_RZ20_COLLECT#SDS_RZ20_ANALYZE
After performing the wizard in SOL, SOL now has the following entries
in RZ21:
SDS2#SM_SDS2CLNT200_READ#SM_SDS2CLNT200_TRUSTED
This would indicate to me that SOL is reading the CCMS information
directly from the monitored system, rather than via CEN.
In the 'Setup System Monitoring' of Solution Manager the Central
Monitoring System and CEN destination are SOL and NONE respectively.
Is this configuration correct, and if not how do I correctly configure
it?
Is the monitored system now only reporting data to SOL, or is it
reporting to both CEN and SOL?
Regards,Issue closed
-
EWA: error message in CRM check for SAP Solution Manager system
Hello!
In EWA report for SAP Solution Manager system I have seen error message: Many CSA* inbound queues in error status were detected in your system. As a result of this BDocs have not been delivered. And then table
Queue Name Status Date of first entry Entries
CSABUPA0000000070 READY 03.12.2007 45
CSABUPA0000000934 READY 07.05.2008 45
CSAIBASE0000000000 READY 23.11.2007 36
CSA_ORDER_8000000000 READY 22.11.2007 5
CSA_ORDER_8000000001 READY 22.11.2007 3
and others.
I looked transaction smq2. There are 11300 queues in it. Is it actual error or it is a normal situation? And that must I do, to remove an error?
Edited by: Mariya Kurbatova on Jul 2, 2009 6:27 AMHi,
Usually problems with hanaging CSA* queues are caused because too many
indiviaual queues are created for the qRFC resources to handle. You can
limit the number of queues as described in note 763680.
Note 763680 would be useful if all of your qRFC resourcesa are in use
when you have a great number of queues. With a large number of dialog
WPs on the system it would probably make sense to reduce the amount
as described in the note.
the casue when you have this problem would be to check SMQR -> GOTO ->
qRFC resources. You can also see if most of your dailog WPs are in use
in SM50.
Also refer to note 758677.
Please schedule report RSQIWKEX (Inbound) to run as described in the
note.
And since your title has mentioned that the EWA is on your CRM satellite system; this maybe a further good reference too
When you replicate lots of data from CRM to R/3, there could be a qRFC
resource problem. In this case, the numebr of queues created can be
reduced by implementing the attached note 356228, particularly solution
2.
For CSA* queues is slightly different from the one decribed in note;
this is because the CSA queues exchange data within the CRM system.
The steps described should be followed, except that table SMOFQFIND
must be used instead of CRMQNAMES. In this table, fields TR_SNAEMS and
SEGM_FLD are equivalent to the CRMQNAMES fieds BAPISTRUCT and BAPIFLD
respectively. It should be possible to follow the solution 2 in the
note as long as you use SMOFQFIND instead of CRMQNAMES.
Hope this helps
Cheers,
SH -
SAP EHP 1 for SAP Solution Manager 7.0 configuration check
Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM -
ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM.
Dear Experts,
I am in the process of ARCHIVIVNG the database for the SAP SOLUTION MANAGER SYSTEM. Since the solman database is increasing randomly i need to archive the old tickets amd also the tables and also the other objects.
Can any one help me how to archive and also what are all the objects to archive in the solution manager system.
Regards,
UmeshDear ALL,
I have got he table ARCDEL_OBJ ( Control Table for Archiving / Deletion) table I guess in this table the archiving objects will be stored.
The objects i got in this table are
CA_BUPA
CMS_PRJASM
CRM_ACT_ON
CRM_COMP
CRM_IPMCON
CRM_IPMPUC
CRM_IPMSAC
CRM_LEAD
CRM_LEAS
CRM_MKTPL
CRM_MKTSC
CRM_OPPT
CRM_RAGR
CRM_SACONT
CRM_SALDOC
CRM_SDBPBL
CRM_SDBSOL
CRM_SERORD
CRM_SRCONT
CRM_SRVCON
CRM_SUR
CRM_UBBPOL
CRM_WTYCLM
PRODUCT_MD
CAN I ARCHIVE ALL THESE OBJECTS OR WHICH OBJECT HAS TO TO BE ARCHIVED IN THIS..............?????
PLEASE LET ME KNOW THE IMPACT OF ARCHIVING THESE OBJECTS.
Regards,
umesh -
Questions on "FAQ - SAP Solution Manager for VARs"
Hi,
I just got through the FAQ - SAP Solution Manager for VARs, but have some further questions:
For me it is not quite clear which connections are necessary for which VAR scenrio.. currently we have setup the service desk in our solman. Customer's aren't linked to the solman yet - we have saprouter-saprouter connections. Connecting them via SAP support backbone is an interesting option, especially for incident management. To get this working we should follow note 1124718 right?
But what about the other scenarios like maintenance optimizer and ewa monitoring? I guess for that we definitly need to build up RFC connections to each relevant customer system (~300+x)?! I think it will be hard to handle so many connections - just consider if a customer is cancalling the maintenance contract, everything needs to be removed again... best would be to have a central communication point...
For MOPZ we need up-to-date system information. So everyone is talking about SLD. Do you also recommend this option? There we need again a connection (direct to SolMan SLD or via external SLD on customer side).
According to the FAQ there is a workaround for ewa monitoring for customers with security doubts.. is this also working for non-ABAP components? We need SMD and WI for generating ewas for JAVA systems...
With regards to Enterprise Support contract: ewa only need to be monitored for productive systems? Can a customer be charged if they want to have ewas monitored for other sytems too? How long do we need to keep the ewas (1 month, 3 months, half year) before they are deleted? Are there any specific requirements?
All the work to get these scenarios working.. is this covered within the Enterprise Support contract? Can the customer be charged for work thats done by the VAR in their system (e.g. RFC connections, SDCCN, SLD,...)?
Sorry for this long text.. hope you have some helpful ideas!
Regards,
RichardHello Richard,
(1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information.
(2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
(3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
(4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
Kind regards
Heinrich
Maybe you are looking for
-
External Display Flickers (Intel on board)
Hi, I have recently made a fresh installation of Arch Linux and trying to setup it for my work environment. I made a basic installation of xfce4 with slim login manager. I wanted to hook my laptop with an external display. I used xrandr to extend my
-
Something is wrong with some of my PSD files when I save them?
I am working with Photoshop Cs5 extended, and I have had it for about a year, I work in Windows 7. I was working on a comic when my scanner broke so I took pieces of the skecthes I drew instead to paint them in photoshop with my cannon powershot came
-
Unable to print to printer in remote office
When the user tries to print we see the print job being created on the redirected printer status screen (HP MFP M127) but the print job is never printed (we see it come in the spooler and out) In the event log we see the following error: How can we
-
HT1577 How much space does 26 24 minute tv shows take up
I am downloading my favorite tv series onto my iPod and I would like to know how much space 26 24 minute episodes take up.
-
i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!