Update SAP Solution Manager 7.0 to EHP 1 with SP 19

Hi!
We use SAP Solution Manager 7.0 (SP 17) on Linux with Oracle
and would like to update this system to EHP1 SP19.
First of all I installed ST-ETP Add-On via SAINT to call the system "Enteprise Edition"
Now I have few questions about the further procedure:
1) can this update from SP 17 --> SP 19 be implemented via SAINT and with one step?
2) what is the documentation of this process?
3) are there any restrictions about Linux and 32 Bit?
Thank you very much!
regards

check this Note #1276022, it contains all crucial information you will need

Similar Messages

  • Upgrade to SAP Solution Manager 3.2 to 7.0 EHP

    Dear Experts
    At present I am using SAP Solution manager 3.2. Now I am planing to update SAP Solution Manager 7.0.
    I am some confutation in SAP Solution Manager 7.0 and SAP Solution Manager 7.0 EHP1,
    what i do please help me.
    Regards
    Sanjay C.

    EHP1 is basically a product enhancement of 700 - i.e offers new functionality
    Usually to get to Enhancement packages you need to be operating NW2004S stack based product - in this case 4.0 (now called Solution Manager 7.0)
    I think this proposal will require first an upgrade from 3.2 to 4.0
    then after applying Enhancement Package EHP1 and following pre-reqs for both steps
    Also bearing in mind that Solution Manager is RFC dependant any change in SID, Hostname or client will require
    all RFC connections will need to be adapted
    There may also be special considerations depending on source configuration or the active Solution Manager scenarios and content
    I would take a look at following PDF for reference - it may help in the initial 3.2-->4.0 upgrade
    http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000208052007E
    Best wishes
    Stuart

  • Launch CRM 7.0 from SAP Solution Manager

    We are buiding the BPH in SAP Solution Manager and would like to store the CRM Business Processes in it as well. Therefore we'll also store the TCodes under the "Transaction" Tab.
    Now, i understand that CRM 7.0 uses a web GUI for configuring TCodes. If we launch the TCode from SAP Solution Manager, does it launch a browser with the right IMG Object for the TCode? How does this work?
    Anyone offer any suggestions/thoughts?
    Thank you, in advance.

    Dear Ramesh,
    I'm pretty sure that it's possible to launch CRM web GUI components from Solution Manager. You can assign BSP Applications to process steps and launch them.
    Most of the configuration in CRM 7.0 is still done via SAP GUI. I think it's only the UI view configuration that can be done in web GUI. However, if you find out which BSP application it is, you should be able to assign it to process steps in the configuration tab. It's done in the same way like assigning TCodes; just use type BSP_APPLICATION instead of BMTA.
    Best regards
    Jens

  • SAP SOLUTION MANAGER 7.0 EHP 1  - need to update the stack?

    I'm trying to understand the enhancement pack concept and what I need to do to update our solution manager.
    currently we are on:
    SAP SOLUTION MANAGER 7.0 EHP 1 - Stack 21
    ST-ICO 150_700: patch 0022
    CPRXRPM 400: patch 0015
    CRMUIF 500: patch 0003
    PI_BASIS Support Package 04 for 7.01
    BI_CONT 704: Support Package 04
    ABA Support Package 04 for 7.01
    Basis Support Package 04 for 7.01
    ST 400: Patch 0021, CRT for SAPKU50015
    ST-SER 701_2008_2: patch 0005
    ST-PI 2008_1_700: SP 0001
    SAP_AP 700: Support Package 0016
    Support Package 15 for SAP CRM 5.0
    BW Support Package 04 for 7.01
    I understand the current stack is 24.  Is this also EHP 1 ?
    I believe I need to update to stack 24 in order to stay current.  Is that correct?
    In addition, EarlyWatch indicates that the ST-A/PI is missing.  Actually it exists but is not the current package.  I believe by updating the stack, the ST-A/PI will also be updated.  Is this correct?
    Should I update the stack to 24?  or just update the ST-A/PI?
    Thanks
    Laurie  McGinley

    Hi,
    >
    > I understand the current stack is 24.  Is this also EHP 1 ?
    >
    Yes, check SAP note 1244225.
    > I believe I need to update to stack 24 in order to stay current.  Is that correct?
    >
    Yes
    > In addition, EarlyWatch indicates that the ST-A/PI is missing.  Actually it exists but is not the current package.  I believe by >updating the stack, the ST-A/PI will also be updated.  Is this correct?
    >
    Yes. Current support package for ST-A/PI is ST-A/PI 01M_CRM570.
    > Should I update the stack to 24?  or just update the ST-A/PI?
    SAP always suggest to be on current support package. But I always prefer to upgrade to n-1 strategy.
    Thanks
    Sunny

  • Kernel Update from 7.00 to 7.01 - SAP Solution Manager EHP1

    Can anyone give me some information about update sap kernel?
    How must I proceed?
    Thanks!

    Login to service market place www.service.sap.com>downloads>supporpackages and patches>My company applicationsselect sap solution manager>SAP SOLUTION MANAGER 7.0 EHP 1>Entry by component>solution mangaer ABAP stack>select sap kernel 7.01 64 bit unicode-->select widows
    server on X64bit>select database indendent>just scroll download you can see list of pathces select SAPEXE_23 which is the lates one and selet the check bot to add to download manager now select database dependant patch based on your database you have installed(Ex oracle or MS SQL)
    select the same patch SAPEXEDB_23 and download the 2 patches through download manager
    uncar the 2 patches throught sapcar command
    sapcar -xvf <and give the patchnameSAPEXE......SAR>
    sapcar -xvf <and give the patchnameSAPEXEDB......SAR>
    Now take the backup of existing kernel
    Drive:/usr/sap/SID/SYS/exe/uc
    once the backup of kernel is finshed stops SAP and releated services
    start>cmd>services.msc-->stop the service sap<SID_instance number> and saposcol service
    now copy all the uncar newfiles to original run directory and replace all.If you face
    problem like some  service is still running then stop all the oracle services also and
    try again.
    Once all the files are copied then start the services and SAP
    Let me know if needed more information
    Regards
    Uday

  • SAP SOLUTION MANAGER 7.0 EHP

    Hi
    We have a test server in which solman is installed with SP level 12 now we want to upgrade it to SAP SOLUTION MANAGER 7.0 EHP 1 Support Package Stack 18 (11/2008) .
    My questions
    1:Is it possible to directly upgrade from SP12 to EHP 1 Support Package Stack 18
    Iam aware of that we need to update the kernel to 7.01 and SPAM to at least 35 patch level apart from these what are the other prerequisties i need to follow
    Regards
    Uday

    Hi
    I was checking at Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade (SPS18,19) in contents
    5:Download by stack download (optional)
    Log on to SWCenter on SAP Service Marketplace:
    Support Packages and Patches -> Entry by Application Group -> SAP Technology Components -> SAP Solution Manager -> SAP Solution Manager 7.0 -> Support Package Stacks.
    Target stack : SAP Solution Manager 7.0 EHP1-19 (03/2009)
    Source stack : <your SAP Solution Manager 7.0 system stack>
    -> SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
    Target stack : 19 (03/2009)
    Source stack : 18 (11/2008)
    Iam at stacklevel 17 and could not find stack level 17 in Source stack
    should i select Source stack : 18 (11/2008) and Target stack : 19 (03/2009) ?
    but my system is at stacklevel 17 only
    when i leave source stack blank and select target as 19 i could see lot of file which i have applied are in the list
    Please help me out
    Note: Iam not using MOP
    Regards
    Uday

  • Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"

    I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
    The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
    An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
    Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
    Edited by: amirsd on Aug 3, 2011 5:53 PM

    Hi,
    Please check the below
    1) ip/host entries should be in /etc/hosts
    2) patch the latest kernel for 2008 R2
    and re run installation
    Regards,
    Ram

  • Message not updated in SAP Solution Manager

    Hello SAP Solution Experts,
    My requirement is to be able to send an incident message to SAP and when they in turn reply, the message in SAP Solution Manager is updated with the reply of SAP. The message could be for example a SAP NOTE number or some guidelines as message text.
    But currently, this is not the case since we are not receiving any updates in the SAP Solution Manager. We need to consult the Marketplace to have access to the message of SAP.
    So basically, as per my understanding, I think SAP is unable to update our Solution Manager system.
    I would be grateful if someone could shed some light on how to make the replies of SAP available directly in our SAP Solution Manager?
    Are there any steps to follow to achieve this requirement?
    I am using the text schema ZLFN as follows:
    Another issue, when the message is created and saved, we get the following warning message.
    Translation in English would be: “No information text is available for SAP”.
    Thanks and Kind Regards,
    Yovish.

    Dear Yovish,
    Report 'AI_CRM_IM_UPDATE_FROM_SAP' is used to update incidents from SAP.
    As alexander said, you can schedule the job 'REFRESH MESSAGE STATUS' using mentioned program on  periodically(1 Hr).
    This batch would update your solution manager system's incidents.
    You can also do the status mapping to update your solman systems incident status by SAP status.
    Thanks,
    Vikas.

  • Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0

    Hi,
    I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
    DB Detail
    SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
    SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
    Thanks,
    Kaleel

    Dear Mohamed,
    I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
    SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
    If you are "Upgrading" one system from Solution Manager 7.0 to  EHP1 then all the messages are preserved.
    If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
    Please see the document [SAP Solution Manger-  Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
    Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
    No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
    Hope this helps to clarify.
    Regards,
    Paul

  • SAP Solution Manager 7.0 Update into EHP1

    Dear experts,
    i'm planning to update a SAP Solution Manager SP15 into EHP1.
    From the SAP Service Marketplace : service.sap.com/swdc, SAP Support Packages, Entry by Application Group, SAP Technology Components, SAP Solution Manager, SAP Solution Manager 7.0, SAP Stack: source stack (15), target stack (EHP1 SP21) THEN validate the download files from the Maintenance Optimizer. Finally download the files via Download Manager.
    Before updating the SAP Solution Manager, i have to update the SPAM/SAINT Version + Kernel. I'm currently on Spam version 7.00/0026.
    Just to be sure, my questions are :
    Do i have to update my SPAM/SAINT version into 7.00/37 or into 7.01/37 before updating into EHP1?
    Do i have to update the KERNEL version into 7.00 or into 7.01 before updating into EHP1?
    Thank you for your help.
    Regards,
    Pascal.

    Hi,
    > Do i have to update my SPAM/SAINT version into 7.00/37 or into 7.01/37 before updating into EHP1?
    SPAM/SAINT version 7.00/37
    > Do i have to update the KERNEL version into 7.00 or into 7.01 before updating into EHP1?
    >
    This should be done, once upgrade will finish.
    check SAP Note 1169247 - Additional info for Solution Manager 7.0 EHP1 update
    Thanks
    Sunny

  • SAP EHP 1 for SAP Solution Manager 7.0 configuration check

    Hi All,
    I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.

    SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
    SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
    Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
    Thanks
    SM

  • Install Enhancement Packages 1 on SAP Solution Manager server

    Hi All
    Anybody know if is it possible to install SAP Enhancement Package 1 on SAP Solution Manager 7.0?
    There is a component named BBPCRM 500 SP12 stopped me to continue the installation via SAPEhpi.
    Thanks before.
    Best Regards,
    Halomoan

    Hi Halomoan,
    BBPCRM 500 is part of Solution Manager 7.0 and 7.0+EHP1. But please check the update guide. It states that "SAP Solution Manager is updated to EHP 1 using transaction SAINT and Java Support Package Manager." So not via SAP Enhancement Package Installer as EHP for SAP Netweaver.
    [SAP Enhancement Package 1 for SAP Solution Manager 7.0|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000718044&_SCENARIO=01100035870000000202&]
    Regards,
    Christoph

  • FAQ - SAP Solution Manager for VARs

    You can find further technical questions around configuration & functionalities in a comprehensive
    FAQ to SAP Solution Manager for VARs.
    This FAQ covers questions and answers around:
        > SAP Solution Manager, enterprise edition
        > SAP Solution Manager VAR setup: configuration of Service Desk
        > Work Center Service Desk: functions & configuration
        > Work Center System Monitoring: setup of SAP EarlyWatch Alert
    You can access the FAQ directly thru the following link [FAQ - SAP Solution Manager for VARs|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722612&_OBJECT=011000358700000490172009E].
    Navigation path: SAP Service Marketplace > SAP Support Portal > SAP Support Infrastructure > SAP Solution Manager > SAP Solution Manager for Partners > Information for Service Provider > Training and HowTo Documents > Administrator
    Please notice: The FAQ will be updated from time to time.
    Edited by: Susanne Schlehf on May 4, 2009 2:48 PM
    Edited by: Susanne Schlehf on May 18, 2009 12:56 PM

    Hello Richard,
    (1) regarding network connections see document [Draft:Technical Support Network Connections for VAR Scenario|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089947&_OBJECT=011000358700000880802009E] as overview and with a lot of detailed information. 
    (2) yes, you have to setup once all your customer connections at the beginning but then only add/remove with customer contract changes
    (3) the workaround by sending by email can handled a anexception. EWA has to be done for productive systems like nowadays done by SAP. Additional EWA services could meas additional business case for a VAR - that's contract between VAR and customer.
    (4) whatever you think may be a business to sell - do it ! (and get a monetary bonus from your boss
    Kind regards
    Heinrich

  • Sap Solution Manager 7.1 SP11 Basic Configuration

    Hi Experts,
    I am in fresh installation for Sap Solution Manager 7.1 SP11. At Basis Configuartion Phase in step " Configure CA Introscope".
    I have successfully installed, but it shows the following message: " Offline - The EM Connection cannot be established (caused by :com.sap.smd.introscope.em.IntroscopeException: java.lang.reflect.InvocationTargetException_) "
    Need suggestions how to proceed from here.
    thanks

    Raja,
    I assume you're using Linux/UNIX.
    Here's the solution. It worked for me.
    In /usr/sap/ccms/apmintroscope/config/users.xml, update the Guest password with this MD5 hash: c4582df82299e0581a9fc6bb34c53
    In user management screen of "Configure CA Introscope", choose "Guest" as connection user with password "guest12" (without quotation marks)
    If it's still not working, then delete the EM and re-install the introscope.
    Go to expert mode -> Delete references -> Remove the line
    Delete folder /usr/sap/ccms/apmintroscope
    Install introscope and management modules againdon't forget to re-set the permission for diagnostic agent user
    Go back to solman_setup "Configure CA Introscope" and do import CA again
    Save, you'll have a green status
    Regards,

  • License for Java stack in SAP Solution Manager

    Hello!
    I installed SAP Solution Manager (ABAP+Java), have ordered the SAP License and applied the license for ABAP part (Tcode: slicense).
    Do I also need to update/license the Java Part of my system in Visual Administration?
    (Server 0 0_30826 .. --> Licensing Adapter --> choose Tab "Installed Licenses")
    Thank you very much!
    regards
    Thom

    Extract from OSS note 953302
    In a double-stack installation, only the license keys in WebAS ABAP is relevant. You do not require a license key for WebAS Java for a double-stack installation.
    If a license key was installed in WebAS Java, it does not have an effect on the function of the system. You can ignore warnings about expired or soon to expire license keys in WebAS Java.

Maybe you are looking for