Documents are not saving as PDFs

My hard drive crashed a couple of weeks ago.  I replaced the hard drive and was able to save the majority of my data.  However, when I re-installed the Adobe Reader, I have to access any PDFs online.  I can save a document as a PDF and it will tell me it is, but when I go back to look it up on my computer, it is not a PDF - only a FireFox link.  I do not want to have to get online every time to access my PDFs since I am limited on internet usage.  How can I permanently save a document and have it read as a PDF without going online to read it?
I appreciate any help!
Terri

The document when saved says it is saved as a PDF but it does not give you that option when I am wanting to save it from the FireFox link to PDF and still pulls up as a FireFox document.  When the document is printed, Adobe Reader is not reading it and it does not print into a PDF, which comes out off-centered or missing information.
Terri

Similar Messages

  • My Word docs are NOT saving as PDF files.

    I go to "File, Print, PDF, Save as PDF, save doc to my desktop, click Save"...it "processes" then chimes alerting me it's completed, but the PDF is NO WHERE on my desktop (or anywhere on my laptop for that matter!!)
    The interesting thing about this problem ONLY happens when I CREATE that particular Word document. If someone emails me a Word doc and I download it and then open it up in Word, I am then ABLE to save it as a PDF. Soo, I tried emailing the file I created to myself...downloaded it, and tried to save as a PDF, same thing happens as before....no where to be found.
    Helpppp. I am SO frustrated. THANKS

    Okay - could be a bad file or a document with a goofy format, size, or table of contents snafu.
    I had issues with Acrobat 9.x with Word 2010 (Windows).  I stopped using Acrobat and just started doing what you're doing - saving direct from Word > PDF - and haven't had an issue since (other than bloated file sizes even saving as "minimum").
    So my advice is to look at your document.  It could be a TOC thing, or a large image, or something else messing up the engine.
    Remember, Office 2007, 2010, and 2011 all save DOCX as XML files.  So the "converter" (save-as-PDF) is rendering XML > PDF.

  • PDF documents are not opening

    I have reader installed, but when I download a PDF document I have to manually "open with" reader. There are not any other PDF programs on the computer. Using win 7.

    Which Reader version you are using? Do you see any error by double clicking on pdf simply?
    Share error snapshot if you see some.

  • UI Shell :  Changes are not saved. If you leave this page

    Hi,
    My JDeveloper version is 11.1.1.6.0
    I have on VO having all transient attributes. The vo having dependent LOV's . When i am not not selecting the value from lov and trying to close the UI Shlll it is not showing warning message.
    When i am changing the lov then trying to close the UI shelll then it is shows the "Changes are not saved..." warning message. I want to skip the warning message . How to do that
    Thanks
    Deepak

    go to <af:document id="d1" > tag and then property inspector and the n make uncommittedDataWarning to off.
    Thanks
    Pratee.

  • How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

    How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
    And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

    Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a  program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

  • Solid color text boxes in MS Word are not importing to pdf

    Solid color text boxes in MS Word are not importing to pdf ... text boxes with pics import and convert fine. Using Word 2013. Any ideas?
    I'm brand new to the forums, so sorry if I'm not asking correctly or asking something already covered.

    Hi Sara!
    Thanks for the response.
    I'm uploading a Word file to my Adobe PDF Packet Annual subscription. I'm running Windows 8.0. Normally I will create a document in MS Word 2013, save it into our dropbox and then when I need to send it to someone (printer in this case) I will log onto Adobe PDF and upload the file to convert. Once it's converted, I'll send the pdf to the client or printer. In this case I created a poster with our logo (in a text box), text, a star (in a text box) and a few solid colored rectangles. Everything converted beautifully - as usual - except the solid text boxes.
    I've used Adobe PDF Packet for a few years and have never seen this. Any ideas or other questions?
    thanks, Dave

  • Documents are not visible with layoutset AppBulletinBoardExplorer

    Hi experts,
    I created a km navigation iview with layoutset AppBulletinBoardExplorer. I created a new networklocation on my PC to the portal repository and upload a lot of documents (becasue a multiple upload from the portal is not possible). The documents are not visible in the iview. When Is change the layout set to ConsumerExplorer the documents are visible. A reboot did not help. If the documents are saved from the portal again, they are visible. Another layoutset or to upload file by file is also not an option.
    How to solve this problem? .
    gr
    Joeri

    Hi Simon,
    thanks for your reply!
    1. Have you tried mass upload via explorer into one KM folder then move the documents you uploaded into another area using the standard UI?
    I have moved the content via KM content option, but problem still exist.
    2. Have you checked the trace files on the portal to see if there is some error being logged that is not showing in the UI, but might give you a clue as to what is going on?
    In the log there is a warning:  user | ACCESS.ERROR"| /KM path | node_create_child. Everyone has read permissions.
    3. Have you raised an support message with SAP?
    not yet
    4. Have you tried using the Portal Drive rather then just windows explorer? (probably won't make a different as I think it uses webdav anyway)
    With the portal drive the same issue :-(.
    It's something with the layoutset in combination with upload via webdav or explore. The documents are also available with a search
    gr
    Joeri

  • PROBLEM FLASH : settings are not saved

    Hello,
    I have a problem with flash recently, i'm using a PPC G4 1,5
    GO RAM version osX 10.4.10 2x1 GHZ ( firefox 2007 ), when i want to
    set preferences of Flash on the site of adobe it's always getting
    by defect preferences when i reload the page for any settings, they
    are not saved, i re instal Flash and i clean up cash etc etc but
    nothing .... i can't use some softwares and it's tidious .....
    Help, thank you .

    Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

  • Mail settings are not saved any more

    Hi,
    after my mailbox structure has crashed, I tried to reset Mail as explained in this answer: https://discussions.apple.com/message/22302114#22302114
    After restarting Mail all settings were deleted (as expected) and I set up my accounts and settings again. Then I recognized that the settings are not saved any more. I tried some times but Mail didn't save the settings.
    I hope there is a chance to fix this problem.
    Thanks for help.

    Thanks for linked document but I find it funny and someone rude that the article assumes that EVERYONE knows the lingo used - i.e. Profile Folder is in "%APPDATA%\Mozilla\" . Where the hell is that???? Jesus, it's much easier to switch to Chrome.

  • AppleWorks documents are being saved automatically as Unix files. How?

    Working on a G3 iBook with OS X (10.3), all AppleWorks documents are being saved as Unix Executable Files by the program despite the dialogue box saying they will be saved as Appleworks documents complete with ".cwk".
    After a while of successfully opening these files via Get Info/ Open As, AppleWorks itself refuses to open up and I have to reload Appleworks onto the computer from disk for another brief lifespan.
    Ideas? Help please.
    MacBook   Mac OS X (10.4.8)  

    Welcome to Apple Discussions
    The files aren't actually saved as Unix executables, your system just thinks they are. I find this kind of file confusion often occurs if permissions aren't repaired using Disk Utility after a system update.
    You can "re-teach" your system what program opens those files. Click a known AppleWorks document in the Finder to highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks 6. If AppleWorks 6 is not a choice, choose "Other" & navigate to the AppleWorks 6 application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks 6.

  • In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    In an eMail message, when I attempt to save two photos by clicking the 'Save 2 Images' link, not the 'Save Image' link, the images are not saved. (I use I I apologize for the late notice, butOS7 on IPhone5). Is this feature broken?

    Please don't post the same question multiple times!

  • Sent Messages are not saved in Sent Mailbox

    It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

    The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
    If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
    If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
    To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
    Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
    If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

  • Backened documents are not getting updated in Classic Scenario

    Hi,
    We are using SRM 7.0 version and we are working on classic scenario where the shopping cart - RFX - Contract are created in SRM and the PO - GR - IR are created in ECC. The blackened documents which are created in ECC PO - GR and IR these documents are not getting updated in SRM system.
    Is there any business functions to be activated.

    Hi Sunil,
    You manually run report ""BBP_GET_STATUS_2" after PO is created in MM. Then check if the follow-on-docs are updated in SC.
    If it is working fine after you manully run report, you will have to properly set time to run this report automatically.
    Best Regards,
    Anu
    Edited by: Anuradha UG on May 18, 2010 8:09 PM

  • Document is not a valid PDF file

    Hi,
    I need help! Iøm trying to upload a visa paper using Adobe-Reader XI and when I upload, it keep saying "document is not a valid PDF file" - what to do now? Maliha

    Are you sure that the document is a valid PDF file? Can you open it with Reader?

  • Follow-on documents are not visible in MIRO in TEST server, awsys = PRD300.

    Dear Experts ,
    The Test Server was refreshed around mid-June 2011 with data of
    Production Server. The follow-on documents are not visible for the
    invoice documents in MIRO in TEST server due to value in tables
    BKPF,RBKP : field : AWSYS = PRD300 .
    The newly created Purchase Orders after the refresh, the accounting
    documents can be seen for the Goods Receipt (MIGO_GR-display) and
    Invoice documents (MIRO).
    we had already raised this issue in March & got the feedback from SAP
    as shown below.
    accordingly we have developed & run the program "zzlogsys2" which
    updates the Logsys/Awsys field from PRD300 ( of production server ) to
    that of the current server i.e. TST300 as required.
    after which the FI documents for the material documents are visible in
    MIGO,but follow-on documents are not visible for the invoice documents
    in MIRO.
    we have Checked notes 781498 and 28958 to see if the logical system is
    correctly assigned , where we found that in table RBKP after entering document number, Fiscal Year , the
    Field AWSYS is "PRD300" & not "TST300" as it should be. We will take up the activity of updating table RBKP
    also as we are currently doing for tables MKPF & BKPF.
    But to have clear picture as to what we are doing is correct , pl
    advise about the following :
    1) Is it a correct process done by our SAP-Basis team , that every time
    any Server ( e.g. Test or Quality ) is refreshed with Production server
    data, the Field AWSYS in various transaction tables gets value as
    "PRD300" which then is required to replaced by running program such as
    ZZlogsys.
    REPORT ZZLOGSYS.
    TABLES: T000, MKPF.
    DATA: NEW_SYS LIKE MKPF-AWSYS.
    PARAMETER: OLD_SYS LIKE MKPF-AWSYS.
    SELECT SINGLE * FROM T000 WHERE MANDT EQ SY-MANDT.
    NEW_SYS = T000-LOGSYS.
    CHECK NOT NEW_SYS IS INITIAL.
    UPDATE MKPF SET AWSYS = NEW_SYS
    WHERE AWSYS = OLD_SYS.
    WRITE:/ 'Number of updates: ', SY-DBCNT.
    2) if the above process is correct & normal , then which are the other
    tables in a particular server ,apart from tables MKPF,BKPF,RBKP , which
    needs to be updated the value of field "AWSYS" in the same way
    replacing value "PRD300".
    3) if the process in point no. 1 is not correct , then what is the
    correct process that the Basis team can do while refreshing any target
    server with production data so that target server retains its value in
    Field AWSYS & not showing "PRD300".
    With 3 servers TEST,DEV & Quality , recently refreshed with production
    server to bring all servers in Sync for a HR patch application, we have
    this situation now in all 3 servers .
    Thanks in advance ,
    Anil Shanbhag

    It is appropriate to move this thread from ERP-MM to [Enterprise Resource Planning (ERP)|Enterprise Resource Planning (SAP ERP);
    Edited by: Jeyakanthan A on Jul 7, 2011 4:56 PM

Maybe you are looking for