Does 64-bit DLL ready for NI DAQmx?

Dear Sir,
Does 64-bit DLL ready for NI DAQmx?
Could I develop 64-bit application in LabVIEW?
please give me the web pages for further understanding,
Thank you,

LabVIEW is a 32 bit application and runs in the 32 bit Windows
subsystem when you install it on a 64 bit Windows OS. As such it can't
load or otherwise use any 64 bit DLLs.
I believe the best solution would be to recompile your DLL as a 32 bit DLL and load that into LabVIEW. Also, have a look at the following KB article:
Are National Instruments Products Compatible with 64-bit Windows XP x64 Operating Systems?
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

Similar Messages

Does extproc for Oracle 64-bit 11.1.0.7 on Win 2003 64-bit load 32 bit DLL?

Hello
Background:
We had Oracle 11.1.0.7.0 32-bit EE on Windows 2003 32-bit EE and now migrated to 64-bit (both OS and DB) and everything worked brilliantly ok except...
Problem:
We used to be able to connect to an external application (Postcode Plus from AFD) via extproc to search postcodes / addresses etc. However, after the migration getting the error:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
The listener.ora and tnsnames.ora configuration as exactly same as what we had on 32-bit machine (except the host name).
For convenience, I've attached both here:
listener.ora (on 32-bit machine):
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
(ENVS="EXTPROC_DLLS=C:\Oracle\product\11.1.0\db_1\LIB\pcpOracle.dll:C:\Oracle\product\11.1.0\db_1\LIB\afdutl32.dll")
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.241)(PORT = 1521))
tnsnames.ora (on 32-bit machine):
MYDB32 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.241)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MYDB32)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora (on 64-bit machine):
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.247)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
(ENVS="EXTPROC_DLLS=C:\Oracle\product\11.1.0\db_1\LIB\pcpOracle.dll:C:\Oracle\product\11.1.0\db_1\LIB\afdutl32.dll")
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
tnsnames.ora (on 64-bit machine):
MYDB64 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.247)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYDB64)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Questions:
1. Does extproc for Oracle 64-bit 11.1.0.7 on Win 2003 64-bit load 32 bit DLL?
2. When searched got a quite of lot link about extproc32 (for all versions of UNIX), but not for Windows and found this link Extproc32 installation Does that mean it is not possible to load 32-bit DLL on 64-bit Windows installation?
3. Is there any workarounds? Or am I stumped so I should now go back and reinstate the 32-bit installation?
Any input / recommendation is appreciated!!
Regards
Kannan

Does that mean it is not possible to load 32-bit DLL on 64-bit Windows installation?Yes,it's not possible,refer to MOS/metalink:
Is It Possible To Call 32Bit Libraries Using External Procedure Agent Extproc On Windows 64Bit ? [ID 372512.1]
Werner

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.

I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??

HT201272 Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'.

Season pass notice does not always download. It does not appear in the purchased items. I am responding to an email stating 'this week's TV show is ready for download'. Any suggestions?

Been having the same problems all week. And am got a generic, not-at-all-helpful response from my initial inquiry with support, then absolutely no response to my follow-up requests. There seem to be a fair number of people posting this problem, so not sure why we're being ignored.
Was able to eventually download the episodes manually via the 'purchased' link, but it's about 10 more steps than normal.
Also noticed that itunes isn't recognizing my purchases at all, not just season passes. If I go to a page of a show where I buy episodes individually, it doesn't show which episodes I have previously bought like it used to.

I would like upgrade a 16-bit dll that was developed for 16-bit windows to a 32-bit dll

I have an 16-bit dll library that was used for talking to a DAQ through Labview version 4 for windows 3.1. I would like to upgrade it so that I can make these calls through Labview version 4.0.1(32-bit). Can anybody do it for me
Attachments:
Megadac.llb ‏361 KB
MEGADLL.DLL ‏240 KB
Driver_Files.zip ‏71 KB

"cincidude" wrote in message
news:[email protected]..
> I have an 16-bit dll library that was used for talking to a DAQ
> through Labview version 4 for windows 3.1. I would like to upgrade it
> so that I can make these calls through Labview version 4.0.1(32-bit).
> Can anybody do it for me
You are asking not much aren't you? I mean your DLL acesses directly the
speaker hardware
in the first function I looked at. Hardware access in 32 bit Windows DLLs is
a big NONO.
Then looking at the communication source I see that your device is
appearently a nice GPIB
device.
In my humble opinion reimplementing the whole piece in LabVIEW would be just
as hard as
porting it properly to Win32 as a DLL. It is certainly a lot of work
in any
case but that
requirement to develop the solution in LabVIEW 4.0 seems rather antiquated
to me.

Does oracle express edition available for 64 bit OS?

Hi All,
Can anyone tell does oracle express edition available for 64 bit OS?
I found 11g does not come for 64 bit. Any earlier releases supports 64 bit?
Thanks

Hi,
Can anyone tell does oracle express edition available for 64 bit OS?Yes, it is - for certain Linux flavors. See this thread for a complete overview: {thread:id=2278170}
I found 11g does not come for 64 bit. Any earlier releases supports 64 bit?No.
-Udo

Where can i find ACROPDFlib.dll 64 bit dll or is there any alternate to use pdf for 64 bit?

Where can i find ACROPDFlib.dll 64 bit dll or is there any alternate to use pdf for 64 bit?
No Matter either its free or Not . ?
Or can I order this Dll to Adobe ?

The Adobe PDF Library is licensed on behalf of Adobe by DataLogics. Price is by negotiation.
http://www.datalogics.com/products/pdfl/

Flash Ready for Windows 7 64-bit OSS???????

Just would like to know when Adobe will have the flash player ready for Windows 7 64-bit OSS? Thanks-

manually download and install:
Flash Player for ActiveX (Internet Explorer): http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player_ax.exe
Flash Player Plug-in (All other browsers): http://download.macromedia.com/pub/flashplayer/current/support/install_flash_player.exe

The announcement Ready for BIOS update does not come with T4400c !

I downloaded the Bios. I accomplished this steps
1 Extract the zip file containing the BIOS upgrade to a formatted floppy disk (please see note below regarding which type of disk to use).
2 Ensure the Notebook is connected to the mains.
3 Turn the Notebook off.
4 Turn the Notebook on with the F12 key. Keep the key pressed until a short beep can be heard.
The announcement Ready for BIOS update comes not and does not get ahead not.
How can I solve the problem?
(http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS&FID=TRO0000000b07)

Hi
I think its really an oldie.
Did you download really the compatible and right BIOS?
I have checked Toshiba driver page and I have found BIOS version 1.00 and 1.2.
As in the Toshiba document described you have to use the Update procedure 7.
If it doesnt work so in my opinion you have used wrong BIOS.

Does the CD include drivers for x64 bit Windows?

Or is that only supported on the Mac Pro?

Yes, the OS X installer disc has the Windows drivers. XP is supported only for 32-bit. 64-bit is supported for Vista, but the graphic drivers only support the 32-bit version as far as I know.

When will get 64-bit PDF converter for 64-bit Firefox variants (Cyberfox, Waterfox, etc.)

I use 64-bit Firefox variants (Cyberfox, Waterfox, etc.), and am frustrated that the PDF Converter addin with Acrobat Pro X and XI does not yet work with them. I understand that a 64-bit DLL is needed for the add-in to work. Inasmuch as the PDF converter works with 64-bit IE-9 and IE-10 and Office2007/2010, I am at a loss to understand why a 64-bit PDF converter add-in for Firefox 64-bit variants is not available. WHEN?
Thank you.

Someday. This is a question asked multiple times but the answer is always the same, there is no real benefit to moving to 64 bit Firefox, and the amount of work required to do something with no benefit makes this a low priority. Eventually it will happen, but just because it uses 64bit doesn't magically make things better.

Drive not ready for use

when i go to update my ipod, i get this error: "the drive is not ready for use; it's door may be open. Please check drive\device\harddisk2\DR4 and make sure that a disk is inserted and that the driver door is closed." then it proceedes to freeze up itunes and then the computer. So when i get this, i have to format my ipod so that i will be able to put music on it again. then after 3 or 4 updates the same thing happens. but never right after i format it. anyone have this happen before or know why this would happen? it is an older ipod, with the click wheel. and it does have the most recent update.
Windows XP

Try changing the drive letter for your iPod.
If you don't know how to do it, I'll look around a bit and find an article to help
~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM ~and a red Apple logo~(Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

LoadLibraryA() in pscompat.dll failed for 'PSORA64.dll': reason=193

Hi:
I setup PeopleTools 8.53 on Windows7 64bit with Oracle database 11.2.0 32bit,Oracle Tuxedo 11.1.1.2.0 64bit and Oracle WebLogic Server 10.3.6,after run Data Mover,using psadmin.exe to create Application Server,then select:Create a domain,select:smaill,all of the settings flowing:
Quick-configure menu -- domain: ps
Features Settings
========== ==========
1) Pub/Sub Servers : No 16) DBNAME :[ps]
2) Quick Server : No 17) DBTYPE :[ORACLE]
3) Query Servers : No 18) UserId :[PS]
4) Jolt : Yes 19) UserPswd :[PS]
5) Jolt Relay : No 20) DomainID :[TESTSERV]
6) WSL : No 21) AddToPATH :[E:\app\Administrator\product\11.2.0\dbhome_1\BIN]
7) PC Debugger : No 22) ConnectID :[people]
8) Event Notification: Yes 23) ConnectPswd:[people]
9) MCF Servers : No 24) ServerName :[]
10) Perf Collator : No 25) DomainConnectPswd:[]
11) Analytic Servers : Yes 26) WSL Port :[7000]
12) Domains Gateway : No 27) JSL Port :[9000]
28) JRAD Port :[9100]
when boot the domain,PSAPPSRV cann't boot:
exec PSAPPSRV -o ".\LOGS\stdout" -e ".\LOGS\stderr" [email protected] -- -D TESTSERV -S PSAPPSRV :
CMDTUX_CAT:1685: ERROR: Application initialization failure
In stderr ,only one message:
LoadLibraryA() in pscompat.dll failed for 'PSORA64.dll': reason=193
In psft\pt\8.53\appserv\ps\LOGS\APPSRV_0223.LOG :
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.146](0) PeopleTools Release 8.53 (Windows) starting. Tuxedo server is APPSRV(99)/2
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.395](0) Cache Directory being used: C:\Users\Administrator\psft\pt\8.53\appserv\ps\CACHE\PSAPPSRV_2\
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.501](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library PSORA64 (200,0)
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.532](0) Database Options: override_connection_reset: 0
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.532](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PS with user PS.
PSAPPSRV.6268 (0) [2013-02-23T23:52:14.539](0) Server failed to start
PSADMIN.6068 (0) [2013-02-23T23:52:21.915](0) End boot attempt on domain ps
In \psft\pt\8.53\appserv\ps\LOGS\TUXLOG.022313:
235208.USER-PC!tmboot.5644.6920.-2: LIBTUX_CAT:1376: WARN: APPDIR value "C:\Users\Administrator\psft\pt\8.53\appserv\pstest" in environment does not match configuration "C:\Users\Administrator\psft\pt\8.53\appserv\ps"
235210.USER-PC!tmboot.5644.6920.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
235210.USER-PC!tmboot.5644.6920.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
235211.USER-PC!PSWATCHSRV.3572.6112.-2: 02-23-2013: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
235211.USER-PC!PSWATCHSRV.3572.6112.-2: LIBTUX_CAT:262: INFO: Standard main starting
235213.USER-PC!PSAPPSRV.6268.6076.0: 02-23-2013: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
235213.USER-PC!PSAPPSRV.6268.6076.0: LIBTUX_CAT:262: INFO: Standard main starting
235214.USER-PC!PSAPPSRV.6268.6076.0: LIBTUX_CAT:250: ERROR: tpsvrinit() failed
235214.USER-PC!tmboot.5644.6920.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
How can i fix this error? Thanks in advance.

Please, do not hijack other's thread.
-- mod. action: this very thread is old and hijacked, locking it --
Nicolas.

Design Suggestions for Multiple DaqMX Task Streaming App?

I'm working on a LabVIEW application in which I'm streaming high-speed data to disk from multiple PXI devices simultaneously. Each device has its own DaqMX task, and all tasks stream to the same file. The PXI device configuration (which devices are in the chassis, which slots they're in, and which channels to read from each device) is determined at runtime.
Does anyone have a suggestion for a design model for this? To make matters worse, I'd like to be able to specify a channel to monitor its data during the streaming. I'm thinking the Producer-Consumer model is the basic approach, and I'm at the point where I have an array of DaqMX tasks, one for each device. I could probably extend that array to be an array of clusters containing:
   1) DAQ Command (e.g. Initialize, Start, Stop, Acquire, etc)
   1) Task ID
   2) Control reference to 2-D array (where each DaqMX read can be stored)
   3) Array of channel names (to allow selection of channel to be monitored
This could be passed as notifier data, to a data collection subVI, but the part I'm struggling with is finding the best way to run X number of tasks in parallel, where X is not known until runtime.
Any suggestions would be appreciated.

Thanks for the input. With regards to the file format, the decision has been made by my superiors not to use TDMS - unfortunate, but NI hasn't provided the information to write a MatLab file reader, which is a requirement. So, I've created a custom file format tailored to the needs of my application, but generic enough to be used for other apps. With it, I've been able to stream 8 channels at 800KHz (4 channels each from 2 PXI-6120s) without breaking a sweat. However, the performance varies greatly depending on which slots the cards are in (but that's a whole different discussion - see the PXI forum for that one). Once NI solves that one, I'll feel a lot more comfortable.
I have already made reentrant subVIs that can perform a specific DAQ task. The problem with a for loop is that the VI sits and wait for a start trigger, then acquires the streaming data. I can't start the next VI because I'm in the first one. I thought about creating a data collection VI, and this VI would start up to 6 other VIs in parallel, based on how many and which cards were present. It's a bit messy, because each slot can contain one of two devices, so I'd need to check which type it was before calling it. I'm thinking I'll have to create the task list and the references to the data in the main GUI loop, and then pass this using a notifier or queue to the data collection loop.

12c on Win7 64-bit - ERROR Can't load IA 32-bit .dll on a AMD 64-bit platform'

My experience is not with XP but with Windows 7 64-bit. with Java for 64-bit, I cannot run Net Config nor the DBCA.
Initially this was the error I got
ExceptionMSG: 'C:\Windows\System32\msvcr100.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform'
ExceptiontoString: 'java.lang.UnsatisfiedLinkError: C:\Windows\System32\msvcr100.dll: Can't load IA 32-bit .dll on a AMD 64-bit platform'
[main] [ 2013-08-24 15:36:04.855 CST ] [WindowsSystem.<init>:424] Failed to load SRVM library: oracle.ops.mgmt.nativesystem.NativeException: PRKN-1008 : Unable to load the shared library "MSVCR100" or a dependent library, from
then I skipped running the Netconfig & DBCA. Finished the installation.
Then did some work around like using the Net Manager instead of Net Config Assistant. so I was able to create a LISTENER
then when I tried the DBCA. I kept getting
oracle.cluster.impl.winsecurity.WinSecurityNative.enableWsecTracing(Loracle/ops/mgmt/nativesystem/NativeResult;)V
Any ideas?
Thanks

Any ideas?
Yes - for starters tell us, in English, what it is you are actually trying to do.
Initially this was the error I got
Got from doing what? We don' t know what you tried to do.
then I skipped running the Netconfig & DBCA. Finished the installation.
What installation? We don't know what you are trying to install or what you have done to install it.
First tell us what you were trying to do.
Then SHOW US exactly what you did to try to do that. EXACT means copy and past the commands you used and the response you got to those commands.
Also post a link to the installation guide that you are using to do the install and confirm that your environment meets the installation requirements and that you have done each and every step.

Does 64-bit DLL ready for NI DAQmx?

Similar Messages

Maybe you are looking for