Does AD site affect netmask ordering?

I may have made an incorrect assumption when creating my RDS farm.
I've split the servers over two sites, and enabled netmask ordering. This seems to work well for the most part however there are multiple subnets available on each site. I made the assumption that netmask ordering weights:
1. Similarity of IP
2. Membership to that AD site
Looks to me that is not correct?
For instance the RDS Farm1 is on the 192.168.10.x subnet on Site1 in AD. All clients on 192.168.10.x connect to this farm fine however 192.168.3.x is also at this site, it seems to just round robin across both of the farms.
So first question, is it correct to say that AD site is irrelevant in netmask ordering?
Second question, does anyone have any advice on making this work how I expect it to? Would adding a secondary IP on each RDS server (on the 192.168.3.x) do what I was mistakenly expecting it to do?

Hi,
Based from the output of the subnets information for both sites, it is impossible to achieve your goal through netmask ordering.
However, I suggest you configure host files on clients to locate appropriate Domain Controllers directly. You can use Group Policy Preference or startup script to configure host file contents, then apply them onto clients.
More information for you:
Files Extension
https://technet.microsoft.com/en-us/library/cc771102.aspx
Assign computer startup scripts
https://technet.microsoft.com/en-us/library/cc779329(v=ws.10).aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Similar Messages

Album uploaded to my Photoshop web site does not appear in album order

Album uploaded to my Photoshop web site does not appear in album order, although after it is configured
through the sharing function, it is in the correct order.

Do matters improve if you update to iPhoto 9.4.1?
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums

How does condition category affect the price procedure

Hello Gurus,
     there is a case as following:
if the condition type in the pricing analysis says in a billing document that the condition is found and set, and one is using the condition requirement number 024 (which only determines the price in billing document) yet still has to do new pricing in order to obtain the condition record, Should the condition category be blank, the system would propose the message condition is found and set but does not provide an actual condition record.
   the fault would be that the condition category on the condition type should be equal to L.
   so my question is " how does condition category affect the price procedure" ? thanks very much!

Hi Zhang,
-->Condition category is a classification of conditions according to predefined criteria.
-->These categories include packaging costs, delivery costs, output taxes and discounts.
-->The classification of conditions by condition categories can be used for analysis.
I hope it will clear for you
Regards,
Murali.

WHERE clause affects sort order???

Hi,
I'm playing around with linguistic sorting and comparing and was using the examples from
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch5lingsort.htm#g1018324
So I have the three entries Große, große and Grosse in my table (the sample data from the manual)
To test these features, I did
alter session set nls_comp = Linguistic;
alter session set nls_sort = XGerman_CI; and ran the following select statement:
SELECT name
FROM words
ORDER BY 1;The rows are then returned in the following order:
Große
große
Grosse
which is exactly what I expect.
When I run
SELECT name
FROM words
WHERE name = 'Grosse'; it returns all three rows which is expected as well.
When I add the ORDER BY (which is the same ORDER BY as in the first step):
SELECT name
FROM words
WHERE name = 'Grosse'
ORDER BY 1; the rows are returned in the following order
Große
Grosse
große
which is different to the order without the WHERE clause (and wrong)
The question is: why does the WHERE clause affect the ordering?

I'm not sure why you think the third sort order is incorrect. In English, the capitals will sort before the lower case leaving both "G" values before the "g". I don't know where the special ... German? ... character will appear but assume that ORDER BY is sorting correctly. If not you need to contact Oracle and open a support ticket.
WHERE clauses will affect how data comes back by influencing index use, but some of what they do will be random. The only way to be sure data will be returned in a certain order is to use an ORDER BY clause.
In particular, in 10g the parallel query option is notorious for returnding data in random order. Where in 9i an indexed lookup would tend to return data in an imaginary sorted order the same query using PQO in 10g often returns data in random order.

Sortlist - round robin - netmask ordering confusion

I went through a crisis not long after splitting my Win2003 AD network into two VLANs, crisis documented at http://discussions.apple.com/thread.jspa?threadID=2361165
In a nutshell, Windows DNS uses netmask ordering to resolve the "best" IP address to client queries based on their IP address. If a given host (on LAN) has more than one IP address on different VLAN/subnets, a query to a DNS server should give both IP answers, though only the one on the same subnet as the client is often accessible to that client. Thus, netmask ordering adds some intelligence to that process, overriding round-robin, and it works pretty well.
Enter OS X Server using BIND, and set up a secondary zone to a Windows primary, and that all goes out the window. It seems OS X Server uses Round Robin by default. Though BIND is supposed to have similar functionality to Windows server's netmask ordering in a function called "sortlist," I can't figure out how to use that in OS X Server.
Anyone ever mess with that?

Camelot wrote:
I'm not entirely sure I understand what you're asking. There is no concept in DNS of subnets - a host record maps to a network address (and vice versa), and subnets don't come into play.
Unless what you're referring to is the ability of the name server to offer different replies based on the client's IP address…?
If so, that is possible in BIND, via views, but there is no GUI support for multiple views in Server Admin (all zones exist in a single view served to all clients).
If you want to offer different results to clients based on their address you'll need to implement a secondary view containing the zone data that should be visible to those clients. You'll also lose the ability to manage your DNS via the GUI. It's not that hard to do, but it does mean you'll typically be working in the shell to maintain your zone files.
My nutshell approach was not clear, but you got the gist. But there is a concept of subnets implemented in Window server. I split our school network into two VLANs for security (keep students from even seeing admin servers) but needed to keep domain in Active Directory and our Windows servers. Thus, the domain controllers are multi-homed. School admin subnet is 172.16/16, student subnet is 172.20/16. Without netmask ordering or round robin enabled, Mac clients requesting internal DNS resolution would always get the 172.16.x.x address of the domain controllers, so they could not authenticate to the domain (the AD plugin apparently can only use the first IP returned in a query, it won't try others if unsuccessful). Netmask ordering enabled the DNS server to look at the IP of the DNS client and reply to queries with the IP which is in the client subnet first, then additional IPs, if any. The next bump I hit was that netmask ordering assumes a Class C subnet, not very well-documented, but a simple command fixed that, and it's worked excellent ever since-- until I tried designating a Mac server as a secondary and set some Mac clients to point to the Mac server for DNS resolution. They then get round-robin replies, so the ADplugin, which must make several DNS queries, gets confused. Research led me to sortlist, but whether it's that or "views" as you suggest, it's probably not something I want to jump into. I am going to give up on my Magic Triangle dreams and convert student and teachers to Open Directory over the summer, just create a new domain.
P.S. technically, MS discourages having DCs multi-homed, but not having anything layer 3 to route between my new VLANs, it was my only option. In addition, the administrative file server I needed to keep away from student hacking is also the main Domain Controller (PDC emulator master), so adding routes to make the DC work across subnets would have defeated the security purpose. It's a smaller private school, limited resources. Thx.

Error while doing outbound delivery against Purchase Order

hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJ

Please go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release.

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Error while doing Goods Receipt for Production Order

We have created following test data in our Development System:
Production Order:1000016
We have processed the abv. production order thru create, release & confirm stages.However, on doing Goods Receipt of the Order thru MB31, system is giving following error:
Msg.No.NA M7001:Check Table TFBEFU_CR entry 10 does not exist.
Can u pl help me in analysing the same.
With Rgds.,
Rakesh Kumar
09324847499

Hi,
Maintain the OPK9 (Valuation Variant for the Order Costing).
It will go thorugh..
Otherwise revert for further discussion..
Regards,
Siva

15" Macbook Pro right front side does not sit flat on the table.

My 15" stock mbp's right front side doesn't sit on the table flat when the screen is lifted up. This is at the front corner of the optical drive. The bumper does not sit level. I have put it on the piece of glass just to make sure. It sits fine closed, but un-even when opened. Maybe the hinge is over torqued causing it to rise? I just got this from the apple store as a replacement for my first that had a bad screen 2 days ago. It's annoying for a 2000.00 dollar machine to have this issue. I took it back and they said it's in spec and that they will not let me do an exchange. Another one of their floor display MBP's had the same issue. The genius said he saw the issue but he would not to an exchange. There are two other apple stores in my area, is it worth a shot? This new second week of January build has a way better screen than the second week of December build. The coating on the screen is somewhat less and it has a better viewing angle. Other than the above issue, the laptop is fine. Is there any fix for this issue? I have read other people having the same problem. I frustrated because as a longtime apple supporter, I can't get get one out of the box that's right. Any help would be appreciated.
Chris

Thanks for the response. I went to the second Apple store and got the same response. It's a millimeter out off. He said that it was in spec. He said it's not perfect but it's not enough to get a replacement. So I may be over doing it here but I feel for a 2000.00 dollar machine, this should not be. It's small defect in the manufacturing process but it is one, none the less. Apple should take a zero manufacturing defect policy if a customer asks for a replacement machine. I think if it's not done right, than it should be fixed or replaced. Hey, I'll probably add some plastic to the foot that's off or I may open the thing up and bend it back to being perfect and fix this small defect but I think Apple should replace it. I have heard other having this problem and I have seen macbook pros in the store with this issue and they say it is within spec. I'll fix the issue that should have never left the factory myself. Anyway, I'll try adding more rubber to the foot.
Chris

I need help..so urgent,pls help on this..i accidentally inserted my SD in the cd drive,how can i get it?does it will affect my computer's system?

in need of help..i accidentally inserted my SD in the cd drive,does it will affect my computer system and function?

Don't feel bad, you are not alone. Here is a 6 page thread (one of many others) that should be of help: https://discussions.apple.com/thread/2283444?start=0&tstart=0
Some got them out and others had to take them in for service.

Operation does not fetch in process order

hi PP-Pi gru,
when i am creating process order from planed order , operation ( master recipe) does not fetch in process order..only take default operation 10, kindly suggest me how all operation will fetch in process order
another mater is when assign production profile in t- code CORU show the error massage " production scheduling profile for plant ALIV,order type does not exist"...but we have used stander order type PI01..kindly suggest me
Rogers
Aqueel

Hi,
Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
You need to define production scheduling profile for your plant in OPKP which is assign to order type dependent parameter COR4 In planning screen. Please check. Also check the work scheduling view of material master.
Regards,
R.Brahmankar

Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?

Why does iPhoto change the sort order of the photos in my album when I attempt to share via Photo Stream?

Did anyone find a good way to sort the shared albums better, so that the ones you share with can better find their way around.
You can arrange them manually in an album, select all and use the Photos ➙ Batch Change ➙ Date to menu option and check the box to add a set interval between photos. That will let the photos be sorted by date and be in the order you want:
OT

Archieve does not exist for purchase order

Hello Gururs,
When i tried to change the delivery date for the PO and when i trying to save the PO
then it throws the error messages-'Archieve does not exist for purchase order'.
PO was created in feb.
Please help me how can i solve this issue.
BR
Ashish

Can you give a more detailed information.
What transaction you actually use, what you enter step by step until you get to the error: 'Archieve does not exist for purchase order'
This message sounds like you want change a PO which is already archived.
A change to an archived PO is not really logical, as you can only archive closed business cases. and if the business case is closed, then why would you change the delivery date.
A PO from February should not really be archived already in June. I never saw it in practice, as you could not do any anual reporting
I would assume further that SAP found the entered PO number in the archive index but did not find the way to the archive itself. This can happen if the archive file was deleted or moved manually.
I am not sure if the next messae has really anything to do with your purchase order, thats why I ask you to post the exact steps until the messages come up:
Le fichier archieve 000524-002SD_COND n'existe pas is the message discription
But even this message explains more or less the same, that the physical archive is no longer in the same place where it is expected to be found according to the info in records of table ADMI_FILES.

When I click on a website in my reading list, why does top sites open rather than the site I've clicked on?

When I click on a website in my Reader list in Safari, why does Top Sites open rather than the website I've clicked on?

Go step by step and test.
Reset Safari.
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Click "Reset".
Delete Cookies
Safari > Preferences > Privacy > Cookies and other website data:
Click “Remove All Website Data”.
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions

If I cancel Muse CC month-to-month, does my site stay active even beyond the 180 days?

Hello everyone. I don't do that many sites so I don't require annual subscription just yet. I'm leaning toward the month-to-month but wanted to cancel my subscription once I have the site up and running and my client(s) have signed off on it. I'm wondering if I go beyond the 180 days (which is how long I guess my information is kept in the system) - does my site come down too. I'm guessing that if I'm paying for hosting with Adobe, or have hosted it elsewhere then it would be fine. I'd just have to re-up my membership plan to go in and make any changes; is that correct?
Thanks, Ben

Hello Ben,
You're absolutely correct. If you have the site hosted elsewhere, or if you are paying for hosting the site that you have in Adobe Business Catalyst, then the site will not go down even if you cancel the Muse subscription, and you'll only need Muse again if you wish to make changes to the site from within Muse.
Hope this helps.
Cheers
Parikshit

Does AD site affect netmask ordering?

Similar Messages

Maybe you are looking for