Operation does not fetch in process order

hi PP-Pi gru,
when i am creating process order from planed order , operation ( master recipe) does not fetch in process order..only take default operation 10, kindly suggest me how all operation will fetch in process order
another mater is when assign production profile in t- code CORU show the error massage " production scheduling profile for plant ALIV,order type does not exist"...but we have used stander order type PI01..kindly suggest me
Rogers
Aqueel

Hi,
Check In master Recipe ,in the PI Tab,There must be some PI category is assigned and in that PI Category,this PI Charactiristic has been assigned.
First goto that Phase of the Master Recipe and then goto PI tab and then find the PI category.
You need to define production scheduling profile for your plant in OPKP which is assign to order type dependent parameter COR4 In planning screen. Please check. Also check the work scheduling view of material master.
Regards,
R.Brahmankar

Similar Messages

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

I ordered at around 12:30AM pacific and it does not show in my order history. When I look it up on the order status page, it just says "received and processing". Do I have any chance of getting it on friday?

It seems to depend on a variety of different things.
Verizon appears to be going by the process time of orders, and not the order time of orders. Your process time will be the timestamp on your confirmation email.
It also depends on which model, GB, and color you ordered. The 6+ were in high demand and low supply.
It also depends on which warehouse (order location) your order was being processed through. Verizon reps have told me that some warehouses have more of certain phones than others, and if your order went to a warehouse that doesn't have enough of that particular phone then you are SOL and will have to back for a backdated order.
There is a possibility you will get it, but if you ordered any of the 6+ models, then it is unlikely.

Batch not updated in process order

hi all,
When i am doing batch determination and goods issue through coik pick list batch not update in process order. presently we are not doing batch determination in process order.after goods issue component batch fields are grey out in the process order

HY,
Batch field are filled only if you do Batch determiantion of components whether it is by auto or manual.And it is logical also becasue if you split the material qty. in more than one batches during goods issue( whether it is in COIK or in COR6N)then think what should be the case in Component screen in process order?
As soon as you complete the Goods Issue This field becomes gray but the filled of Quanity withdrawn is update with qty you have withdraw.
Regards
Dhaval

Deleting operations in master recipe of process orders

Dear Guru's,
I want to delete the operations in master recipe of process orders. The operation numbers are different in different process orders. This activity has to be performed on bit large number of process orders. Can anyone help me in providing the process for doing this activity in mass. Any suggestions?
Thanks in advance.
Regards
Kalyan

Dear Kalyan,
Why do you want to delete the operations(basically phases)at process order level?
If it's really required to execute the Shop floor activties and if the order numbers is huge in number means then in my
understanding only a LSMW/BDC can help you,but technically I'm concerned about selecting the operation/phases for deletion
by passing on the confirmation number or operation number for a particular process order.
If it would be the latest operation/phase for a product means then make the changes in the master recipe so that the same is
getting copied into the process orders in the future.
Check and correct me if I'm wrong.
Regards
Mangalraj.S

Function Module does not fetch value

Hi All,
I am using the fm RV_PRICE_PRINT_HEAD to fetch condition records. When I run this fm in SE37 for a particular document(vbeln) number, the values are fetched correctly into the internal tables TKOMV and TKOMVD.
The same fm does not fetch values when I run for second time for the same document(vbeln). This means :
1) I will go to SE37, type RV_PRICE_PRINT_HEAD, supply the export parameters in COMM_HEAD_I, execute it and obtain the condition records (Till this time absolutely fine)
2) Now, press Back (F3), Let the export parameters in "COMM_HEAD_I" will remain same. Just press Execute (F8). Then condition values are not fetched.
Could any body help in this regard...
Thanks
Thimmappa Hegde

Hi
 I have given you the other alternative bcoz there is a limitation while calling this FM: RV_PRICE_PRINT_HEAD.
If you see the comments and code of Include: LV61AA11, you can understand the problem.
* mechanism to controll which conditions are already part of table TKOMV
Every time a pricing result is read from database the key is put into
TABGL. Also TABGL is updated if we've lines in TKOMV assigned to a
special key but entry in TABGL (case 2).
Originally TABGL was established to handle following pathological
case: condition successfully read from DB -> entry in TABGL. Then all
read conditions where deleted during processing (e.g. manually
deletion etc.). If we run into this routine again no records should
be redetermined from DB...
read table tabgl with table key knumv = komk-knumv
 transporting no fields.
Case 1:
conditions have been already read because there is a fitting entry in
TABGL. Exit immediately if caller doesn't want to force DB access.
if sy-subrc eq 0. ---> First time SY-SUBRC NE 0 so no problem
 if generell_lesen ne 'X'. --> Later runs SY-SUBRC eq 0 and generell_lesen value is SPACE.
 exit.
 endif.
else.
Hope this clarifies your doubt now.
Kind Regards
Eswar

How to notify in case SQL query(JDBC sender adapter) does not fetch records

hi,
How can we notify(by alerts or something) in case SQL query(JDBC sender adapter) does not fetch records? In channels logs it only says processing started & finished(no message is created for same).
Thanks,
Mayank

Hi,
1 ) What is exact audit log message ?
2) Try fetching the count in SQL statement if there are any valid records it will give the count.
May for testing you can use <TEST> in update statement.
3) Have you used taskTimeout parameter ?
4) Are multiple channels polling on same table ?
regards
Ganga

JDBC Sender Adapter - NOT FETCHING RECORDS -PROCESSING STARTED

Hello all,
I have set up a JDBC sender adapter .With polling interval as 30 Seconds. Polling is done successfully
but it does not fetch the records .
Valid Data is present in the tables.In the Communication Channel Monitoring log shows :
"Processing Started"
after each poll interval.
Adding to this , it was working fine with the same parameters two days back.
I have enabled the Driver Trace but didnot get any information from Trace.
How to resolve this issue?Any help
Regards
Ganga Prasad

Hello maheshwari,
Valid Data is there & many records are there to be fetched.
One more thing Normally in the Communication Channel Monitoring
for an JDBC adapter even if there are no records to fetch we get the Log information in detail that :
Polling interval started.
Processing finished successfully
Processing started
Polling interval started.
Processing finished successfully
Processing started
But here in my case am getting only : (polling interval : is 60 Seconds)
        2/5/08 8:29:19 AM           Processing started
     2/5/08 8:28:19 AM           Processing started
     2/4/08 3:34:54 PM           Processing started
     2/4/08 3:33:54 PM           Processing started
One more observation is that my poll interval is 60 seconds but now it is polling after every 120sec
       2/5/08 11:17:31 AM           Processing started
     2/5/08 11:15:31 AM           Processing started
     2/5/08 11:13:31 AM           Processing started
     2/5/08 11:11:31 AM           Processing started
I have tried refreshing Cache but no change .
Regards
Prasad

In IPhoto, after I submit my book to the Apple store, it shows it uploading, but does not finish the process.

after I submit my book to the Apple store in I photo, it shows that it assembles and uploads, but does not finish the process. I cannot use the cancel button and have to force quit IPhoto to get out of the process.

Assuming you're referring to iPhoto on your Mac here are some potential fixes you can try:
1 -
Go to the System/Sharing preference pane and make sure Remote Apple Events is checked. If it is, uncheck it and then recheck and try ordering again.
2 -
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
3 -
Boot into Safe Mode, Mac OS X: Starting up in Safe Mode, and try ordering from there.
Note: Create a proof pdf file of the book as described in this Apple document, iPhoto, Aperture: Previewing an order in iPhoto or Aperture, before ordering the book and keep the pdf file to compare with the printed copy when it arrives.

When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

Problem:
When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
Symptoms:
1)   Sync: It’s not completing the sync. Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options. I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
waiting for sync to start (step 1 of 7)
backing up (step 2 of 7)
preparing to sync (step 3 of 7)
determining apps to sync (step 4 of 7)
preparing apps to sync (step 5 of 7)
importing photos (step 6 of 7)
waiting for changes to be applied (step 7 of 7)
syncing apps / copying 1 of 4 (App name) (step 7 of 7)
canceling sync
apple icon
2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone. All of the albums are correct/complete in iPhoto. All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list. If I click on Update All, the Apps are successfully updated in iTunes. But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
Other Potential Pertinent Info:
The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago). Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed. I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive. Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself. However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive. All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
Settings/Status:
MacBook Air
OSX v. 10.9
iPhoto ’11 v. 9.5 (902.7)
iPhone iOS 7.0.4
iTunes v. 11.1.3 (8)
Summary Tab
Backups (This Computer)
Options
Automatically sync when this iPhone is connected
Sync only checked songs and videos
Photos Tab
Sync Photos from iPhoto (429 Photos)
Selected albums, Events, and Faces, and automatically include (no Events)
Albums – 9 are selected

You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Without standard release confirmation should not allow in process order

Our clients need is that without standard release confirmation should not allow in process order.
We are using CORK,cor6 and MB31 My need is to apply user exit in all cases.
I got input from sdn User exit:-PPCO0006 Function module Exit_SAPLCOZF_003
INCLUDE ZXCO1U06
I need to activate this only during confirmation.ie confirmation to be avoided if cost is not released.
Regards,
Pert

Hi,
You are right. For preventing confirmation in case std cost estimate release is not available you need to do enhancement. You can check for following exit along with exit which you mentioned in your post :
Enhancement CONFPI05
EXIT_SAPLCORF_405 - Process Ord. Conf.: Cust.-Specific Enhancements when Saving
INCLUDE ZXCOFU10
Check either of the enhancements which may fulfill your business requirement.
Regards,
Tejas

Target cost not appearing in process order

Hi All,
Please let me know the reasons for target cost not appearing in process order.
Thanks,
SAP PQ

Two more scenarios:
1. You have co-product.
2. You reverse the variance calculation.
It will show the target cost only after you run variance calculation.

Hi all, I've got very unpleasant issue with my iPhone 4s on ios 5.1 - it can automatically turn on the 3G even if my local operator does not have the 3g coverage. What I should do to solve this problem? (p.s. even want to jail it!!!))

Hi!
I've got very unpleasant issue with my IPhone 4s, it can automaticaly turn on the 3G even if my local mobile operator does not have 3G coverage.
I hate it, 'cause my battery dies in a couple of hours. How can I solve this problem. It is very annoying. I just thinking about jailing!!!
Thanks in advance.

There are NO carriers that legitimately offer the iPhone in Ukraine according to this list: http://support.apple.com/kb/ht1937
I'm not talking about carriers that support 3G, I'm talking about AUTHORIZED iPhone carriers. There is NO SUPPORT available for iPhones on networks other than those who are authorized BY APPLE to carry the iPhone.
The iPhone should work with any compatible GSM carrier. If your carrier is not on the list I linked to, you will have to work with them to resolve any problems. There is nothing else anyone can do for you.

Multiple selection in Query Panel. Operator Does not equal generates error.

Hi,
I'm using Jdeveloper 11.1.1.4 and creating Oracle Fusion Web Application with ADF Business Components.
I want to use multiple selection on LOV in ADF Query Panel with Table, but I get the following error
when I use operator "Does not equal":
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
A simple example:
Schema: HR
Generate default Business Components for tables Departments and Employees.
Model:
Create List of Values for EmployeesView(DepartmentId)
List Data Source: DepartmentsView1
List Attribute: DepartmentId
Display Attributes: DepartmentName (UI Hints)
Create View Criteria EmployeesByDepartmentVC for EmployeesView
Criteria Item:
Attribute: DepartmentId
Operator: Equals
Operand: Literal
Select "Support Multiple Value Selection" (UI Hints)
ViewController:
Create blank JSF Page: showEmployees.jspx
Drag EmployeesByDepartmentVC from Data Controls to showEmployees.jspx
Create Query=>ADF Query Panel with Table
Run application.
Press Advanced button.
Select operator "Does not equal" and department names "Administration;Marketing"
Press Search
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
Note: it works fine with operator "Equals"
Best,
Kees.

Hi,
I was reading:
http://www.oracle.com/technetwork/developer-tools/jdev/jdev-11gr2-nf-404365.html#bugs_fixed_in_11.1.2.2.0
Bugs Fixed in 11.1.2.2.0
Bug.No. 13508184
unsupported model type error thrown for multi select view criteria
I have tested the use case described in this thread with JDeveloper 11.1.2.2.0 but I still get the same error.
when I use operator "Does not equal":
Error: Unsupported model type.
SelectMany does not support a model of type class java.lang.Integer.
Is there anybody who can tell me more about this bug fix?
Thanks,
Kees.

IPhone does not fetch automatically

I have set my phone to fetch every 15 minutes for the "non-push" e-mails. But lately, if I don't run the mail application, it does not fetch e-mail automatically. The mail icon will show no new e-mails, I will click on it, then it will start checking mail, then I will have bunch of old e-mails (2-3 hours old if not older) pop up. Any ideas how to fix this?

The issue is supposedly with Yahoo. Something with their servers. Most of the people discussing the Push problem are Yahoo email users. I just can't understand why it's taking so long to correct. Apparently they've known for months. Mine worked flawlessly until sometime in early October. And then one day, it stopped working. I've tried everything except a complete restore. I don't want to do that and hoping it gets fixed before I resort to that.

Operation does not fetch in process order

Similar Messages

Maybe you are looking for