Does ADDRCOMM field in BUT000 need equal to ADDRNUMBER field in ADRC

I know this question is not really related to ABAP programming. But I don't which category I should post.
Here is my question:
I use FUNCTION 'BAPI_BUPA_ADDRESS_CHANGE' to update ADRC table address information.
I trace the function: it inquiry BUT000 first if find ADDRCOMM has value, then itwill use that value go to ADRC to update.
Here is the case:
BUTOOO: partner-0000011905; addrcomm: 42957
ADRC: addrnumber 42957 is not exists
I would like to know is it suppose same or not?
<b>I would like to know what function I should use if I already know ADDRNUMBER need to update in ADRC. (not use
'BAPI_BUPA_ADDRESS_CHANGE').</b>
Can I update the ADRC directly?</b>
Thanks,
Helen

Hi Helen,
Welcome to SDN.
Please do not do direct update to ADRC table.
In SPRO you can maintain address for a plant.
SPRO -> SAP Customizing Implementation Guide --> Enterprise Strcuture --> Definition --> Logistics General --> Define, copy, delete, check plant --> Then Choose DEFINE PLANT.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful as a way to say thanks.

Similar Messages

BDOC - Update a Z field in BUT000 whenever a salesorder is created in ECC

Hi ,
The requirment is, whenever an sales order is created in ECC for a perticular customer, I need to send one field with value 'X' in it to CRM and update BUT000-ZZODER field (I created ZZODER field in BUT000 using EEWB).
User wants this to be done using BDOC and it is the 1st time i am working on bdoc. Could any one please help me doing it?
It will make my life easy if you can send me a step by step process.
Cheers,
Kalyan

Hi Kalyan,
I have few questions before suggesting you an solution,
are you replicating orders from ECC to CRM
are you planning to replicate the entire order or is it just one field.
If you are replicating orders then you may have use BADis to aceive this, checking on the order type you can update the Zfield for specific order type.
If its just one field then you may have to configure a new adapter, write in some code to acheive this.
regards,
Sameer Ahamad

In transactions ME21n, ME22n, ME23n I need to add new field to item detail

Hello,
In transactions ME21n, ME22n, ME23n I need to add a new field to the table control TC_1211, in SAPLMEGUI screen 1211 for PO line items. The new field is UNSPSC Code, a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
BADI ME_PROCESS_PO_CUST enables you to extend the business logic of the Enjoy purchase order. Is this the correct BADI to use for the purpose of adding a new input/output field to the PO detail SAPLMEGUI screen 1211?
Does anyone have any examples of adding a new field to PO Item Detail screen using BADI ME_PROCESS_PO_CUST? I have had some experience creating Badi's, and would appreciate very much some sample code if possible.
We are on release SAP ERP Central Component 5.0
SAPKB64018     SAP Basis Component
SAPKA64018     Cross-Application Component
SAPKH50013     Logistics and Accounting
Thank you,
Victoria

Hi,
Thank you for the response. I tried this and found Badi ME_PROCESS_PO_CUST. Do you have any examples of adding a new cust field to PO Item overview screen using badi ME_PROCESS_PO_CUST? I have had little experience creating badi's, and would appreciate very much some sample code if possible.
In transactions ME21n, ME22n, ME23n I need to add a new field in PO Item overview (screen 1211 of SAPLMEGUI). The new field ZZUNSPSC, has been appended to table EKPO as a 30 char field, which will be enterable/changeable on the ME21n, ME22n screens and display only on ME23n.
Can you tell me if method FIELDSELECTION_ITEM of badi ME_PROCESS_PO_CUST the correct one to use for the purpose of adding a new input/output field to the PO item overview on SAPLMEGUI screen 1211?
Thank you for help - much appreciated,
Vicki

Update Record Field if Value Not Equal

Hello All,
I am using Toad for Oracle 10. I have a MERGE INTO Process that updates tbl_requisition based on FK - fk_allotment_id that equals parent table tbl_allotment PK - pk_allotment_id. Both tables have create, update and deletes triggers. The process is executed when a Apply Changes/update button is clicked from tbl_allotment. So, all the record data from tbl_allotment updates tbl_requisition record if the fk and pk keys are equal. My problem is if a record is updated within tbl_requisition. Now the record from tbl_requisition is different from tbl_allotment. If any value is updated from tbl_allotment for the matching pk_allotment_id = fk_allotment_id record from tbl_requisition. tbl_allotment record data will override the updated value within tbl_requisition. I would like to only update the values that were updated/changed and are not equal from tbl_allotment to tbl_requisition. Can anyone assist me with this?
Begin
MERGE INTO tbl_requisition req
USING tbl_allotment alt
ON (req.fk_allotment_id = alt.pk_allotment_id)
WHEN MATCHED THEN
UPDATE SET
     req.FK_JOBCODE_ID = alt.FK_JOBCODE_ID,
     req.FK_JOBCODE_DESCR = alt.FK_JOBCODE_DESCR,
     req.FK_JOBCODE_PAYRANGE = alt.FK_JOBCODE_PAYRANGE,
     req.FK_PAY_RANGE_LOW_YEARLY = alt.FK_PAY_RANGE_LOW_YEARLY,
     req.FK_DEPARTMENT_ID = alt.FK_DEPARTMENT_ID,
     req.FK_DIVISION_ID = alt.FK_DIVISION_ID,
     req.FK_NUMBER_OF_POSITIONS = alt.NUMBER_OF_POSITIONS,
     req.FK_DEPARTMENT_NAME = alt.FK_DEPARTMENT_NAME,
     req.FK_DIVISION_NAME = alt.FK_DIVISION_NAME,
     req.REPORT_UNDER = alt.REPORT_UNDER;
EXCEPTION
WHEN NO_DATA_FOUND THEN
    dbms_output.put_line('No data found');
End; Thanks for reading this thread and I hope someone can provide some assistance. If the create tables or anything is needed that is not a problem to provide.

Thanks for responding Frank and providing the EXCEPTION information also. Here are my create tables and insert statement. I changed the child table from tbl_requisition to tbl_allotment_temp, same process though.
CREATE TABLE "TBL_ALLOTMENT"
   (     "PK_ALLOTMENT_ID" NUMBER,
     "FK_DEPARTMENT_ID" VARCHAR2(5),
     "FK_DIVISION_ID" VARCHAR2(100),
     "FK_JOBCODE_ID" NUMBER,
     "FK_JOBCODE_DESCR" VARCHAR2(100),
     "FK_JOBCODE_PAYRANGE" NUMBER(*,0),
     "FK_PAY_RANGE_LOW_YEARLY" NUMBER(*,0),
     "NUMBER_OF_POSITIONS" NUMBER,
      CONSTRAINT "PK_ALLOTMENT_ID" PRIMARY KEY ("PK_ALLOTMENT_ID") ENABLE
CREATE TABLE "TBL_ALLOTMENT_TEMP"
   (     "PK_ALLOTMENT_TEMP_ID" NUMBER,
     "FK_DEPARTMENT_ID" VARCHAR2(5),
     "FK_DIVISION_ID" VARCHAR2(100),
     "FK_JOBCODE_ID" NUMBER,
     "FK_JOBCODE_DESCR" VARCHAR2(100),
     "FK_JOBCODE_PAYRANGE" NUMBER(*,0),
     "FK_PAY_RANGE_LOW_YEARLY" NUMBER(*,0),
     "NUMBER_OF_POSITIONS" NUMBER,
      CONSTRAINT "PK_ALLOTMENT_TEMP_ID" PRIMARY KEY ("PK_ALLOTMENT_TEMP_ID") ENABLE
INSERT INTO tbl_allotment
(FK_DEPARTMENT_ID, FK_DIVISION_ID, FK_JOBCODE_ID, FK_JOBCODE_DESCR,
FK_JOBCODE_PAYRANGE, FK_PAY_RANGE_LOW_YEARLY, NUMBER_OF_POSITIONS)
values
(00002, 0000220000, 100408, 'Revenue Analyst',
2210, 38389, 5);Once data is created for tbl_allotment, this insert statement inserts the data to tbl_allotment_temp.
INSERT INTO tbl_allotment_temp(
     PK_ALLOTMENT_TEMP_ID,
     FK_JOBCODE_ID,
     FK_JOBCODE_DESCR,
     FK_JOBCODE_PAYRANGE,
     FK_PAY_RANGE_LOW_YEARLY,
     FK_DEPARTMENT_ID,
     FK_DIVISION_ID,
     NUMBER_OF_POSITIONS)
    VALUES (
     :P3_PK_ALLOTMENT_ID,
     :P3_FK_JOBCODE_ID,
     :P3_FK_JOBCODE_DESCR,
     :P3_FK_JOBCODE_PAYRANGE,
     :P3_FK_PAY_RANGE_LOW_YEARLY,
     :P3_FK_DEPARTMENT_ID,
     :P3_FK_DIVISION_ID,
     :P3_NUMBER_OF_POSITIONS);Once any update occurs to tbl_allotment, this process updates tbl_allotment_temp based on temp.pk_allotment_temp_id = alt.pk_allotment_id.
Begin
MERGE INTO tbl_allotment_temp temp
USING tbl_allotment alt
ON (temp.pk_allotment_temp_id = alt.pk_allotment_id)
WHEN MATCHED THEN
UPDATE SET
     temp.FK_DEPARTMENT_ID = NVL (alt.FK_DEPARTMENT_ID, temp.FK_DEPARTMENT_ID),
     temp.FK_DIVISION_ID = NVL (alt.FK_DIVISION_ID, temp.FK_DIVISION_ID),
     temp.FK_JOBCODE_ID = NVL (alt.FK_JOBCODE_ID,    temp.FK_JOBCODE_ID),
     temp.FK_JOBCODE_DESCR = NVL (alt.FK_JOBCODE_DESCR, temp.FK_JOBCODE_DESCR),
     temp.FK_JOBCODE_PAYRANGE = NVL (alt.FK_JOBCODE_PAYRANGE, temp.FK_JOBCODE_PAYRANGE),
     temp.FK_PAY_RANGE_LOW_YEARLY = NVL (alt.FK_PAY_RANGE_LOW_YEARLY, temp.FK_PAY_RANGE_LOW_YEARLY),
     temp.NUMBER_OF_POSITIONS = NVL (alt.NUMBER_OF_POSITIONS, temp.NUMBER_OF_POSITIONS);
End;Once the data is created within tbl_allotment the data is also inserted within tbl_allotment_temp. If tbl_allotment_temp.NUMBER_OF_POSITIONS value is changed from 5 to 10 is fine. The problem is when a update occurs within tbl_allotment and the updated field is not NUMBER_OF_POSITIONS. The changed field values from tbl_allotment should only update the field data within tbl_allotment_temp.
UPDATE tbl_allotment_temp
SET
NUMBER_OF_POSITIONS = 10
UPDATE tbl_allotment
SET
FK_JOBCODE_DESCR = 'Revenue Test'Now within tbl_allotment_temp only field FK_JOBCODE_DESCR should be updated to Revenue Test but my MERGE INTO process will update all the field values. So the updated NUMBER_OF_POSITIONS value 10 will now be 5. I would only like to update any changed value from tbl_allotment to tbl_allotment_temp. If any record value from tbl_allotment_temp was changed that value should not be updated from the MERGE INTO Process within tbl_allotment unless those values have been updated within tbl_allotment. Let me know if this is not clear so I can clarity more Frank.
Edited by: Charles A on Aug 29, 2011 8:41 AM

Does anyone know how I can create a text field in a pdf document that will multiply a total in another box?

does anyone know how I can create a text field in a pdf document that will multiply a total in another box? I’m making an interactive pdf for an order form (attached), and I need to find a way for the “total quantity” number to multiply by 9 and total in the “Amount Due” box.

Hey Gary,
Have a look at this post: Re: horizontal scrolling similar to excel
Andy's reply will show you how to make a table scroll horizontally, but it will be tough to accomplish it in some sort of easily replicable way. I am working on a JQuery extension that will help accomplish this, but I have had my time invested in another project at the moment.
Good Luck,
Tyson

Need a document for field exit....urgent

Can any one please send a document for field exit or have a simple document on how to work on a field exit with screen shots. pls send it ...its urgent
Thanks and regards
Nandha kumar R

Hi,
A field exit is a type of user exit.
A user exit is a hook where you can inject your own add-on functionality or behavior to SAPs standard business applications without having to modify the original applications.
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
    CASE okcode.
        WHEN 'BACK OR EXIT'.
            CASE sy-dynnr.
                    WHEN '100'.
                         SET SCREEN 0.
                         LEAVE SCREEN.
                    WHEN '200'.
Note that you can write any code that satisfy your needs.                                                     ****
But in this case, this was wrote as a sample code for reference sake.                                    ****
And you can test it.                                                                                ****
                         SET SCREEN 100.
                         LEAVE SCREEN.
             ENDCASE.
      ENDCASE.
Field exits (SMOD/CMOD) Questions and Answers
1. Field exit was created with CMOD, but is not processed when calling the screen.
- Since the field exit is not processed until PAI, an action must be triggered on the screen (Return, Save, ...).
- Set profile parameter abap/fieldexit to YES and restart the system.
- After activating the function module FIELD_EXIT... and the field exit, leave the transaction on whose screen the field exit is to be executed. The screen is not generated until the transaction is started.
- Do not work on different application servers since there may be some delay before the field exit is activated.
- The profile parameter must be set on all or none of the application servers.
- If the field exit is to only be active on specific screens, check whether you chose the correct program and the correct screen
      number (take care with subscreens).
- Using SE51 -> Field list, check that the screen field does have a reference to a data element. In the name of the field exit use the name of the data element and not the field name.
- After transport, field exits are marked as active but will not be processed.
   Tip: First try deactivating the field exit once more and then afterwards, activate it again.
2. How is performance affected by setting abap/fieldexit?
- If a screen is generated and the profile parameter is set, a check is run on 2 tables (TDDIR, TDDIRS) to see whether a field exit must be generated for the respective field. In practice, the screen load is not generated until the screen is selected after an
update. The user should not notice any difference because screen generation is very fast.
3. Can you read the contents of other screen fields in the field exit?
- In principle, every field exit can store its value in the global variables of the function group (TOP) and hence make them
available to other field exits. Note here that field exits are always called and not only if an entry is made in the field or if the field is empty. In addition, it is not possible to make any assumptions about the order in which the field exits will be called in the future.
4. How does the field exit behave on step loop fields ?
- After the user has entered data, the field exit is called in PAI as often as there are visible fields in the step loop. The system
variable SY-STEPL is incremented each time. If a new value is assigned to the field, it is displayed in the module between LOOP and ENDLOOP. This module is also called once for each visible step loop line.
5. Can field exits be debugged ?
- No. Field exits must be tested separately in the ABAP/4 Development Workbench. For errors which only occur in the screen environment, it is helpful to write interesting variable to the file system using TRANSFER... . These can then be analysed there.
6. What can you do if the field contents are no longer transported to to ABAP/4.
- Check whether a value is assigned to the field OUTPUT.
7. When is the field exit called if a conversion exit is attached to the
   data element ?
- The field exit is called after the conversion exit. This means that the INPUT field receives the data in the same format as the
ABAP/4 program also receives it.
8. Although a global field exit is inactive, a function module is called which does not exist (for example FIELD_EXIT_PROGRAMM_@)
- This is an error in the kernel which no longer occurs as of 3.0C. As a temporary measure, it is useful to assign a program and a screen which do not exist to the field exit and then activate the field exit.
9. Field exit is not visible in CMOD, although created.
- If you want to create a field exit for a data element, a function module is proposed with the name FIELD_EXIT_. This
function module must exist for the field exit to work. If you do not create this function module, but do create one with a suffix,
the data element is not displayed in CMOD.
10. Field exit is not executed although it is active.
- Fields which do not have the 'Input field' attribute usually do not trigger a field exit. The field exit is designed to allow an
extended input check. It is therefore only called for input fields - even if they are not ready for input at runtime of the         application by LOOP AT SCREEN.
This rule does not apply, however, if the field is located within a steploop. Here the field will be always activated, even if it is
invisible.
- Field exits can only be executed for fields that are directly related tothe dictionary. If the relation is indirect, i.e. via an       ABAP declaration ( LIKE ), no field exit can be executed.
11. Field exits on check buttons do not work
- Field exits are only intended for input fields. As check buttons count as graphical elements, you cannot install field exits on
them.
12. Field exits do not work on selection screens
SAP Field Exits
From 4.6c onwards, Field exits will no more be supported by SAP. They removed the function of field exit but they had given lot of flexibility through userexit.
However, if you still required it, here is how to activate it :-
First called up transaction CMOD.
Then called up transaction PRFB.
or
Activation of the field exits and assignment of the dynpros can also be carried out using program RSMODPRF. For this purpose, the program must be started without parameters (input fields remain blank). If required, new field exits can be created using program RSMODPRF (see the program documentation).
REFER THIS LINK ALSO.
defining screen fields using FIELD-SYMBOL
Thanks,
Shankar

Need to add new fields in transaction UDM_DISPUTE.

Hi Friends,
This is regarding UDM_DISPUTE transaction in FSCM.
I need to add new fields (drop down lists) in transaction UDM_DISPUTE.
Program Name: SAPLSRMCLFRM2
Screen Number: 100
Can any one please suggest me with the name of exit using which I can add these new fields.
Or another way through which I can add these new fields viz., BADI or classes.
Thank You in Advance!
Regards,
Tejaswini

Execute the below code to find the userexits the t-code is using
REPORT yuserexit_vin NO STANDARD PAGE HEADING.
TABLES : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
TABLES : tstct. DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECT SINGLE * FROM tstc WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'PROG' AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
    SELECT SINGLE * FROM trdir WHERE name = tstc-pgmna.
    IF trdir-subc EQ 'F'.
      SELECT SINGLE * FROM tfdir WHERE pname = tstc-pgmna.
      SELECT SINGLE * FROM enlfdir WHERE funcname = tfdir-funcname.
      SELECT SINGLE * FROM tadir WHERE pgmid = 'R3TR' AND object = 'FUGR' AND obj_name EQ enlfdir-area.
      MOVE : tadir-devclass TO v_devclass.
    ENDIF.
ENDIF.
SELECT * FROM tadir INTO TABLE jtab WHERE pgmid = 'R3TR' AND object = 'SMOD' AND devclass = v_devclass.
SELECT SINGLE * FROM tstct WHERE sprsl EQ sy-langu AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ', 20(20) p_tcode, 45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
    WRITE:/(95) sy-uline.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 sy-vline, 2 'Exit Name', 21 sy-vline , 22 'Description', 95 sy-vline.
    WRITE:/(95) sy-uline.
    LOOP AT jtab.
      SELECT SINGLE * FROM modsapt WHERE sprsl = sy-langu AND name = jtab-obj_name.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/1 sy-vline, 2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
    ENDLOOP.
    WRITE:/(95) sy-uline.
    DESCRIBE TABLE jtab.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
* *---End of Program

Need to add one field in MM02

Hi ,
I need to add one field in MM02 screen.
Can u help me in this please.
I need to do this by using screen exit ,how to do this?
can u......
Regards,
Kalidas

Hi Kalidas,
Selection Text: P_TCODE: Transaction Code to Search
Text Symbols: 001 - Enter the Transaction Code that you want to search through for a User Exit
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Kindly Reward Points If You Found The Reply Helpful,
Cheers,
Chaitanya.

Adding fields to BUT000 and ensuring sync with SD

Hi
I have a requirement whereby I am adding 6 custom fields in BUT000 (all Z Fields), these fields should then be visible on the screens for the transaction FPP1 and FPP2. I am able to achieve this functionality by using BDT.
Whenever we create a Business Partner and populate the REF CUSTOMER field then an equivalent customer is created in SD (that is for XD01 we have a customer who is created). Now I want the customer who is created through FPP1 have those 6 custom fields populated and we are going to add the same six fields to KNA1 and KNVV and whatever data is entered in FPP1 should then get reflected in those table fields for that record.
Can anyone help me with the procedure?

I have a PB form that I have two user defined fields created.
In addition I've added two Comboboxes, that has a list of items that I'm using to populate the user fields.
Because, of this, I'm not populating the user fields in a standard way (Through the UDF Window). What I'm actually doing is, after I update my selection in the Combobox and press the update button, I capture the item press event for the button, then I check to see if the event has been handled by the system. If it has, I proceed and create a Business Partner object, then I get the record the system just updated and update its user defined fields with the data selected in the Combobox (Which is temporarly stored in a class variable).
This is when I get the error, but I only get the error if the user defined field is currently null. If there is a value in the field then I don't get the error.
Hope this help you to duplicate.

Advanced Custom Field help. Need fiscal quarter/fiscal week.

A coworker is setting up an MS Project...project, and she asked
for some help adding a custom field that would convert the Start date field into our Fiscal Quarter Fiscal Week schema, to display as FQFW, e.g. Q1W1. I've written a formula that accomplishes this quite nicely in excel, but I've never even touched Project
until this week. Apparently it doesn't take formulas quite the same way as Excel does. I tried using the ''Switch" function in Project, and it worked, but it only accepts 14 arguments(right?), and there are obviously 52 weeks we're dealing with. Does
anyone have any suggestions? Would there be a way to do this using VBA? (I know next to nothing here as well.)
Formula in excel where A1 is the Start Date:
=IF(AND(A1>=DATE(2014,2,1),A1<=DATE(2014,5,2)),CONCATENATE("Q1","W",(INT((A1-DATE(2014,2,1))/7)+1)),IF(AND(A1>=DATE(2014,5,3),A1<=DATE(2014,8,1)),CONCATENATE("Q2","W",(INT((A1-DATE(2014,5,3))/7)+1)),IF(AND(A1>=DATE(2014,8,2),A1<=DATE(2014,10,31)),CONCATENATE("Q3","W",(INT((A1-DATE(2014,8,2))/7)+1)),IF(AND(A1>=DATE(2014,11,1),A1<=DATE(2015,1,30)),CONCATENATE("Q4","W",(INT((A1-DATE(2014,11,1))/7)+1)),FALSE))))
Any and all suggestions welcome.
Thanks.

msinnen,
You're correct, switch statements and if statements can only be nested to 15 levels. However, VBA can get you there. This macro should do what your coworker needs with the following assumptions - the fiscal year starts in January and quarters end on the
last day of the month, not the last Friday. If either or both of those assumptions are incorrect, then this macro will need some tweaking. Note: the quarter and work week designator will be written into the Text1 field.
Sub FQuartsandWeeks90()
Dim t As Task
Dim Mon As Integer
Dim Qtr As String, Wk As String
For Each t In ActiveProject.Tasks
If Not t Is Nothing Then
t.Text1 = ""
Mon = Month(t.Start)
Select Case Mon
Case 1 To 3
Qtr = "Q1"
Wk = "W" & CStr(DatePart("ww", t.Start))
Case 4 To 6
Qtr = "Q2"
Wk = "W" & CStr(DatePart("ww", t.Start) - 13)
Case 7 To 9
Qtr = "Q3"
Wk = "W" & CStr(DatePart("ww", t.Start) - 26)
Case Else
Qtr = "Q4"
Wk = "W" & CStr(DatePart("ww", t.Start) - 39)
End Select
t.Text1 = Qtr & Wk
End If
Next t
End Sub
John

Filtering data based on Z field in BUT000 while running CRMM_BUP_SEND.

We have a Z field in BUT000. So while executing CRMM_BUPA_SEND i want to filter the data in BDOCs
( BUPA_MAIN and BUPA_REL ) based on this Z Field in BUT000.Can you guys provide your inputs?

HI Jerin,
Since you want to change the data during the Middleware data exchange, You can enhance the Middleware flow using custom FM in table CRMC_BUT_CALL_FU (can be accessed through Tcode CRMC_BUT_CALL_FU).
You can use a relevant FM, for example:
BPOUT BUPA 1000000 BUPA_OUTBOUND_MAIN
Now copy the FM & create a custom FM (you jsut need the interface parameters and not the actual source code). Inside this FM , you will get all the required data and you can even change it .
So, you can do your custom code here.
To put this FM in the flow, you will have to create an entry in the table
For example:
BPOUT BUPA 999999 ZZ_BUPA_OUTBOUND_MAIN
So, your custom FM will be executed before the standard one and all your custom code will get executed.
Hope this helps. Revert if you want more detailed explanation.
Reward points if this helps
Regards,
Alin

I need to determine the fields on a selscreen at runtime

Hi Team ABAP,
I need to determine the fields on a selscreen at runtime.
That means FM´s like DYNPRO_FIELD_GET, are not doing the i need.
If a field is made inactive or invisible in PBO (at selection Screen Output) i dont Need/want this in my Analysis.
Maybe i better state what i want to achieve.
I want to rightclick a selscreen-field, and then use the upcoming context menue to make it dissappear.
For that i added a pf-status to that selscreen.
In sy-curow i get which row the user clicked on (for example take 5), so now i need to find out which selscreen field is displayed in row 5.
So i can create the customizing entry for this field.
Maybe someone has an idea for me, i dont need coding, i can do that myself.
Thanks for reading
regards
Florian Kemmer

Well Anyway, it took me a Little but i figured it out.
following code does the trick for me:
[code]
Tables phelp.
IMPORT phelp FROM MEMORY ID 'PHELP'. [/code]
i do this in the Event AT_SELECTION_SCREEN OUTPUT.
Then in phelp-dynprofld i have the actual field i clicked on.
And even if i totally misunderstood you you helped me a lot focusing my thoughts on the right way.
Before your answer i didnt think about that while pressing F1 it works and i only have to find out how they do it.

I want to switch to Adobe FormsCentral from Jotform, but need a sketch signature field. Any plans?

Are there any plans for a sketch signature field as Jotform has? Everything about FormsCentral is better, but this is a field that I need to have use of for customers.

Hi,
Currently FormsCentral does not support signature field as noted in your question.
If you like, please vote or submit a request for this feature in the forum, FormsCentral main page.
Thanks,
Lucia

Need to add new fields to the condition table

Hello All,
The requirement is to create the new condtion table for MM containing the following fields and maintain the entries in this table:
- client
- characteristic
- class
- internal characteristic.
THe condition tables are created via tcode M/03 or through the customizing path
Material Management > Purchasing > Conditions > Define Price Determination Process > Maintain Condition Table.
The problem which i am facing is as follows :
-SAP has the standard procedure for the generation of the condition tables . Selected fields are made available by SAP in the field catalog and we can select only from the those available fields. Once we select the required fields the condition table is automatically generated in the background.
-As the requirement is, we need to have 4 fields in the generated condition table (client, characteristic, class and internal characteristic), but the problem is that none of these fields are available in the field catalog which is provided by SAP (in tcode M/03, M/04 and M/05).
-Designing of the Z table wonu2019t be useful as we would not be able to use the Z table as the condition table.
Can you please suggest how can we add the desired field to the existing field catalog in M/03 or is there any other alternate solution to this ?
Thanks in advance for your help.

>
Rinkesh Doshi wrote:
> Hello,
>
> The specific ABAP question which I have is :
>
> Is there any way in which we can enhance the existing field catalog in M/03 tcode to include the 4 new fields (client ,characteristic,class,internal characteristic) ?
>
> Thanks.
Please post your code which you developped until now and show us where the problem is. I cant see any ABAP related question.

VA01 Sales order - Header-- Accounting tab need to add a field

Dear All,
The requirement is,
1. I need to add a field in Sales order.
Path for the same is as follows:
VA01> Goto> Header--> Accounting tab
2. The field will be a date field that needs to calculate date on.
a)create a new field. ex - zchdt (chq due date)
b)when customers enters value in Assignment,
i.e vbak-zuonr
after that trigger logic is
3.vabk-kunnr = knvv-kunnr
a)sy-date + knvv-kvgr2 (exclude sundays)
example - 14 sept + 30 days = 14th october
should populate value - 14th october i.e. field (zchdt)
4. This activity needs to be triggered before the sales order is saved.
kindly know whether this is possible or not.
if possible how & which exit & also with example code.
if you could give me your contact(cell no).
Regards,
Nagendra D.S.
Mobile - +91 9819899082

Hi All,
VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
when customer enters value in Assignment i.e zuonr & after that trigger logic is
1. vbak-kunnr = knvv-kunnr
2. sysdat + knvv-kvgr2 (exclude sundays)
example - 16 sept + 30days = 16 oct
in field zchdt value 16 oct as to populate
Pls help me in the code.
Regards
Nagendra

Does ADDRCOMM field in BUT000 need equal to ADDRNUMBER field in ADRC

Similar Messages

Maybe you are looking for