Does Air 350 PC card support WPAPSK??
I've got a Air-PCM352 card on my laptop.
It works great w/ WEP, but when I try to make it work w/ WPAPSK w/ either TKIP or AES, I don't get any option for WPA at all.
I'm using Aironet Client Utility v5.01.
Does this card support WPA? If so, how can I get it to work?
350 series are discontinued and I can't find a driver download site for it.
AIR-PCM352 supports WPAPSK/TKIP
It may be EOL, but it doesn't mean it is EOS.
You should be able to get latest Rev at:
http://tools.cisco.com/support/downloads/go/Platform.x?softwareType=Aironet%20Client%20Bundle%20(Firmware,%20Driver,%20Utility)
For XP Exmaple:
PCM, LMC, PCI Client Adapter firmware 4.25.30, Windows XP NDIS driver 8.2.3, ACU 5.05.001
If you have problems getting the file, I'd suggest opening a TAc case (have your NIC's SN handy).
Similar Messages
-
Does orig. Airport card support WPA/WPA2?
Can a Mac equipped with an original Airport card (802.11b) connect to a WPA- or WPA2-protected network via a third-party router? (Any router — my question doesn't concern a particular router, but is more general in nature.) If so, are there minimum OS or other software version requirements for WPA/WPA2 support with the old card? Is there an Apple article that specifies the relevant requirements and procedures? My repeated searches for one have been fruitless, and this question comes up regularly in some forums I monitor daily where I'd like to be able to answer it confidently.
A Mac equipped with an original Airport card supports only WPA, not WPA2.
Verification of the fact that the original Airport card supports WPA is found at:
http://docs.info.apple.com/article.html?artnum=107795
A Mac equipped with an Airport Extreme card (or newer) is required for WPA2 support.
I don't know of a Knowledgebase article that specifically states an Airport Extreme card is required for WPA2 support. However, that requirement is clearly stated in the older versions of Airport update software that added WPA2 support to OS X. See for example:
http://www.apple.com/support/downloads/airport42formacosx1033.html -
Does the PCI-CAN2 card support DeviceNet ??
We are building a CAN network to simulate the CAN bus environment in vehicles.what we have are a pci-can2 card ,a simulator based on 51singlechips,and a electromotor.we plan to build a CAN node with the simulator and the electromtor to simulate the mirror adjustor in vehicle ,and try to allow the exchangement between the realone and the simulator later .so ,a Devicenet based on CAN network may be a suitable choice to us.But I saw two different products on NI.com , PCI-CAN2 and PCI-DNET.so I wonder whether we can implement Devicenet protocol on the PCI-CAN2 card ? If possible , what should we do and what do we need? no matter software or hardware ,Could you please give me some suggestion? Thank you !!
Hi,
The easiest way to interact with a DeviceNet based network is using the NI-DNET
driver software. The NI-DNET software runs on all CAN cards that come
as part of an NI-DNET kit (PCI-DNET, PXI-8461/D and PCMCIA-DNET) as
well as certain Series 1 CAN cards.
There are two different types of CAN hardware, referred to as 'Series
1' and 'Series 2'. Only 'Series 1' CAN cards with a high-speed physical
layer can be used with NI-DNET.
'Series 2' CAN hardware was introduced about two years ago and DOES NOT
work with NI-DNET. The online product pages don't list Series 1 CAN
hardware anymore.
From chapter 2, 'NI-DNET Hardware Overview' of the NI-DNET User Manual:
Hardware in (current) CAN kits is referenced as Series 2. Hardware in
DeviceNet kits is referenced as Series 1. Series 2 CAN cards cannot be
used with the NI-DNET software (NI-CAN only). The features of Series 2
CAN cards are specifically designed for CAN applications, and provide
no distinct advantages for DeviceNet. For more information on Series 2
hardware, refer to the hardware overview in the NI-CAN Hardware and Software Manual.
Hardware in CAN kits offers 1-port and 2-port variants. NI-DNET
operates on one port only. If you use NI-DNET on a 2-port Series 1 CAN
card, only the top port can be used.
Hardware in CAN kits offer special transceivers (physical layer) such
as Low-Speed/Fault-Tolerant (LS) and Single-Wire (SW). Hardware in CAN
kits also offer the option to power the transceiver from the card, not
the network. These transceivers cannot be used with DeviceNet. Only
High-Speed (HS) transceivers comply with the DeviceNet specification.
-B2k -
THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED.....
Hello. I bought on Dec. 17th 2007 at Orange shop in Beausoleil (south France) an iPhone with the option of unlocking the Sim (100 Euro plus). I followed all instructions. Everything was perfect, on Dec. 24th I was able to unlock the iPhone and used with Orange sim, MonacoTelecom sim and Vodafone sim. BUT the iPhone had a problem: when in sleep mode it did't received calls. So Afer 24 hours I stopped to use, UNSAFE. After Christmas holidays I called Apple assistance, they send me UPS and I returned iPhone to Apple (Jan. 4th 2008). I received a NEW iPhone on Jan. 8th 2008, VERY RUSH. Perfect service, I thought (...making terrible error...). The iPhone was LOCKED and I wasn't able to use. Now starts all the problems and for this reason I'm writing.
I called Apple and Orange many times. Orange didn't received the documents from Apple for the changing of IMEI and Serial, for them I had the first iPhone. After many cals finally I asked Apple to send something official for the changing.
....Days goes on and on.......
Every day two times I called Orange, but evert time I received different versions of my situation. Everyday I tried to restore the iPhone but still simlocked.
On Jan.15th after a meeting with a lawyer I decided to make pression to Apple: infact I returned them an unlocked iPhone and I received back a locked one.
I finally was able to speak with a "supervisor" (Mr. F...) and he tried to solve the problem.
On Jan. 16th I spoke with another "supervisor" (Mr. J...) and he told me to make another time the restore, because they changed the firmware.
From now I tried to make the restore many times with Orange sim. Everything seems to go well but when I put another sim on iTunes there is a white page with:
"THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please etc etc....".
So the iphone is locked!!! Maybe is country locked, I don't know.
Incredible, unbelievable.
From Apple they told me to wait someting from US, but until now ..... nothing, I received no news from Apple.
The bad situation is that after more than 30 days after the buy I am not able to use the hardware I bought!
I hope that someone from Apple can read this post (sorry if is so long, but with this details I think that in Apple can understand the problem).
I send in warranty an hardware with certain features that I payed to Apple and I received back it with different features.
That's not serious.
After many days, next week I think to go by legal means if Apple France is'nt able to solve the issue.
Many thanks if someone from Apple read my post.
Many thanks if someone help me.But who has to make another unlock? Orange told me that for them is ok and the phone is unlocked. I read on other pages that Apple has a world-database with Imei numbers. So seems Apple can also do the unlock, even for the fact that they returned me a locked phone, different from the one I sent them. The warranty is with Apple, I forgot to warite in my first post that first of all on Janauary I went to Orange shop where I bought the iPhone but they told me for every problem is Apple that has to solve.
-
i unlocked my iphone 4 factory and i upgrade to 6.1 when i connect it to itunes it apears
The SIM card inserted in this iPhone does not appear to be supported
This iPhone is not currently setup to work with carrier you're attempting to use. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked.It sounds like you or someone else hacked the phone to unlock it. Updating it locked it to the original carrier.
How did you unlock it? The ONLY legitimate way is to ask the carrier it is locked to to unlock it. Any other way requires hacking or jailbreaking the phone. -
Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?
-
I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one. -
when registering my iphone on itunes the message - the sim card insertedin this iphone does not appear to be supported - can anyone shed some light on this and tell me a way around this problem? the phone itself is an english phone and tried to register with a spanish sim and that message appeard, so i tried with my iphone sim which is english and the same message appeared!
thanksIs the English sim from the original carrier as that is usually the message you get with a carrier locked phone.
-
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.Or if you've recently got the phone unlocked then you'll need to connect it to itunes and then do a fresh restore to unlock it ,although for most users simply connecting to itunes for few seconds did the trick.
-
Error: sim card inserted in this iphone does not appear to be supported.
Hi all--
Bought an iPhone 5 off ebay. It's totally wiped, and when I go to activate, I get a "Sim Not Valid" error on the phone, and "sim card inserted in this iphone does not appear to be supported" in iTunes.
It is an AT&T phone, and has an AT&T sim in it. Talked to AT&T, and they said it just needed to be unlocked. I got the seller to go through that process. However, the last step for unlocking is:
1. Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2. Ensure the original SIM card that came with this device is inserted in your iPhone.
3. Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4. Backup and restore your iPhone using iTunes.
I assume ideally, the seller was supposed to still have the phone and complete the unlock himself. But I have the phone and cannot backup and restore because I get the sim error in iTunes which blocks me from doing anything as far as I can tell.
Am I missing a step? Is there any way for me to complete the unlock, or do anything at all to get this phone working even as an iPod, other than sending it back to the seller?
Thanks.
ChrisThen return the phone to the seller and get your money back.
The symptoms you describe are typical of a phone that was hacked or jailbroken to unlock it at some point. Very often after doing so, when the phone is restored, it becomes completely unable to activate even on the carrier it was originally locked to. -
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information
what can in do?Well unfortunatly that advice does not always work. I bought a unlocked iphone4 from apple several years ago and went to att on a no contract basis. Six months later the phone crashed while updating the operating system. Apple replaced the phone with a new one. All is fine till I got a iphone5 and gave te phone to my cousin. The phone is now locked to att but att says the IMEI number is not a valid ATT IMEI and therfore cant unlock it. Apple says there is nothing They can or are willing to do so now I am stuck for a 600.00 phone that can't be used.
If anyoun knows a way naround this situation mI would appreciate a heads up. -
Does Camileo P30 SD camcorder support SDHC card
Hi,
I am going to buy this model. I need to know.
Does Camileo P30 SD camcorder support SDHC card?
Can I use 8GB SDHC card in this product?
Please advice.Hi Roni,
below you can see, which kind of sd card allows how long to record movies or make pictures.
movie files:
4GB SDHC (Class6) - 1:06 h - Full HD (1080p) / 2:13 h HD (720p)
8GB SDHC (Class6) - 2:14 h - Full HD (1080p) / 4:28 h HD (720p)
16GB SDHC (Class6) - 4:27 h - Full HD (1080p) / 8:55 h HD (720p)
32GB SDHC (Class6) - 9:01 h - Full HD (1080p) / 18:03 h HD (720p)
pictures:
4GB SDHC (Class6) - 1.304 pcs. - High (8mp) / 1.778 pcs. - Standard (5mp) / 3.260 pcs. - Low quality (3mp)
8GB SDHC (Class6) - 2.620 pcs. - High (8mp) / 3.573 pcs. - Standard (5mp) / 6.550 pcs. - Low quality (3mp)
16GB SDHC (Class6) - 5.525 pcs. - High (8mp) / 7.125 pcs. - Standard (5mp) / 13.063 pcs. - Low quality (3mp)
32GB SDHC (Class6) - 10.571 pcs. - High (8mp) / 14.415 pcs. - Standard (5mp) / 26.428 pcs. - Low quality (3mp)
best regards -
Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs?
Does the current WebKit version in Air SDK 3.5 support Uint8Array or any bufferArray stuffs? If not, is there an alternative or workaround solution so I can reuse some javascript routines that requires bufferArray like Uint8Array...? Thanks in advance.
You needed to use SDK 5.1 or later. AIR uses 6.0 or 6.1 now, so Retina is ok without any special tricks.
-
my iphone 4s was continually searching for a newtwork my carrier informed me my iphone needed a service or exchange. i drove 2hrs and paid $239 to exchange my iphone. i then went to activate it and i recieve a message saying activation failed. the SIM card inserted in this iphone does not appear to be supported. contact apple for support. i rang apple and they informed me its my sim or the carrier. i rang the carrier and they said its apple. i have also tried activating the phone by using another carriers sim and the same carriers sim from another persons working phone. still get the same message.
Dude,
Apple didn't lock the phone, and you'll be waiting until kingdom come of you think that Apple will unlock it.
Only the carrier to which a phone is locked can authorize the unlocking. -
O2 - The sim card inserted in this iPhone does not appear to be supported
I just sold my iPhone recently to a guy who has now gone out to Libya for a while, the phone worked fine on iOS 4 with Three, and was offically unlocked by O2 and worked on O2 and Vodafone before selling it, however now he has gone out to Libya the phone is not activating and iTunes is just saying...
"The sim card inserted in this iPhone does not appear to be supported."
What does this mean, he has tried the SIM card in another iPhone and it works fine but it won't work in my old one.
What can be done, I am unsure why iTunes won't activate what is clearly an unlocked iPhone.The likely answer is that no one knows. Or everyone is too busy talking about the latest press release from Apple.
As long as it was unlocked by a carrier and not by jailbreaking it should work on any GSM network. So the problem is most likely with the SIM your buyer is trying to use. It's either defective or it doesn't have a plan that is compatible with the iPhone.
Maybe you are looking for
-
How do I stop Safari from Changing Visited Links Color's?
I recently switched from Firefox to Safari since I find Safari much faster. I do have one annoyance though. When I click a link (especially in forums) and revisit a page with that link, Safari is changing the link's color. Firefox did this too, it ch
-
Can't find ipod touch on itunes after service pack
I have a dell studio 1555 that has windows 7. I was having troubles downloading the service pack 2 for my computer so eventualy got a windows support worker it download the service pack on my computer. Ever since it got downloaded i can't find my ipo
-
Proper way to handle people raising dead threads?
Someone just 'bumped' a thread from 2008 Re: Problem providing download link for BLOB data in apex report What is the polite way to handle this? thanks MK
-
./runInstaller problem in notes 443617.1
[oracle@localhost database]$ ./runInstaller Starting Oracle Universal Installer... Checking installer requirements... Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2 Passed All installer
-
Now I know this is a simple one, but my reason for posting is seeking BEST practice for my issue. XML doesn't rate highly in level of experience so I would appreciate so more advanced input :) Simple scenario: TextArea Component in Flex is populated