Does DS 5.2 support the PKIX schema defined in RFC2587?

hi,
please, can anybody answer me this:
1. does DS 5.2 support the schema defined in RFC2587
(http://www.ietf.org/rfc/rfc2587.txt)?
...a minimal schema to support PKIX in an LDAPv2 environment...
2. if so, please can you explain how i go about configuring DS 5.2 for RFC
2587? or point me to the documentation?
3. if it doesn't support RFC 2587 out of the box, what schema(s) does DS
5.2 support by default?
thanks in advance for your help.

i think i have worked out what i need to do to make DS 5.2 rfc2587-compliant (i have also worked out - by rtfm - that it doesn't by default ;�).
dn: cn=schema
changetype: modify
add: objectClasses
objectClasses: ( 2.5.6.21 NAME 'pkiuser' DESC 'auxiliary class for non-CA certificate owners'
SUP top AUXILIARY MAY userCertificate )
dn: cn=schema
changetype: modify
add: objectClasses
objectClasses: ( 2.5.6.22 NAME 'pkiCA' DESC 'class for Cartification Authorities' SUP top
AUXILIARY MAY ( authorityRevocationList $ caCertificate $ certificateRevocationList $
crossCertificatePair ) )
dn:cn=schema
changetype: modify
replace: attributetypes
attributetypes: ( 2.5.4.39 NAME ( 'certificateRevocationList'
'certificateRevocationList;binary' ) DESC ' ' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5
SINGLE-VALUE ) any other suggestions still welcome. thanks in advance.

Similar Messages

Output map: Document Type does not match any of the given schemas

On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?

Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek

The document type does not match any of the given schemas. batching

I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.
Can somebody help me how to resolve this issue?

Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

The document type does not match any of the given schemas

Hi,
I have created an envelope schema.To precisely process inbound envelope documents,in the xml disassembler component i have used the Documentspec and envelopespec properties.
in the properties i have the the schema name,Assemblyname
but i have got the error like The document type does not match any of the given schemas.
I have verified the schemas have deployed properly.
can you help me on this?

Hi Sujith,
As pointed out by Johns lot's of thing can cause this. You have to analyze lot of things, but this kind of error indicates that the message type that you are debatching is not deployed. For Example :
If you are debatching on Order than Order schema should be deployed in the admin console.
One more point that you need not to specifiy Documentspec and envelopespec properties until and unless there are multiple schema's of same message type deployed in different assembly. The dissasembler component will automaticaly disassemble the messages
just looking after the body XPATH.
Regards,
Rahul Madaan

Does Photoshop Lightroom 4 support the Olympus OM-D

Does Photoshop Lightroom 4 support the Olympus OM-D? Does not seem to out of the box but would like to know if there is a plug in or update available or coming soon.

LR4.1 (coming soon, currently RC2)
Download LR4.1 RC2 now from
http://labs.adobe.com/technologies/lightroom4-1/?tabID=details#tabTop
New Camera Support
Canon EOS 5D Mark III — introduced with release candidate 1 (March 29, 2012)
Canon EOS 60Da
Fuji FinePix F770EXR
Fuji FinePix F775EXR
Nikon D3200
Olympus OM-D EM-5
Panasonic Lumix DMC-GF5
Pentax K-01
RICOH LENS A16 24-85mm F3.5-5.5
Samsung NX20
Samsung NX210
Samsung NX1000
Sony Alpha NEX-VG20
Sony SLT-A57

Does Acrobat XI Pro support the feature of syncing settings in Creative Cloud?

Does Acrobat XI Pro support the feature of syncing settings in Creative Cloud? I downloaded this software from my Creative Cloud account but I do not find the sync settings option in it. Is this feature not available?

No it doesn't.
Acrobat isn't part of the Creative Cloud product range, it is included in the CC subscription packages but it doesn't include features of the "... CC" products such as Sync or Typekit.

Does LabVIEW 8.6 support the NXT toolkit?

Does LabVIEW 8.6 support the NXT toolkit?, the NXT toolkit 1.0.1 patch does not give instructions on how to load it with LabVIEW 8.6. Does anyone know how to load the patch with LabVIEW 8.6?
LEGOAustin

Hi LEGOAUSTIN,
Check out the forum dedicated to Lego: http://forums.ni.com/ni/board?board.id=beta18. It is largely community driven but sometimes NI employees post.
I would also talk to Lego about NXT support. Check out his KB on the issue: http://digital.ni.com/public.nsf/allkb/59F9356834A0E85086257244007A3354?OpenDocument.
What I can give you in the meantime is to ensure you've done the right order:
Install the LEGO MINDSTORMS NXT Toolkit v1.0
Restart the computer
Install the LEGO patch 1.0.1
As for explicit support in LabVIEW 8.6, it doesn't appear to be any right now and I cannot comment on the future.
A quick Google Search came up with this as a possible work around: http://forums.nxtasy.org/index.php?showtopic=3277
Message Edited by JeffL on 02-11-2009 10:34 AM
Jeff | LabVIEW Software Engineer

Does Photoshop Elements 12 Support the MWG Face Region Metadata Standard?

I'm looking at the trial version of PhotoShop Elements 12. I see that it is possible to use the Organizer to automatically recognize faces and to manually define Face Regions in images.
These then appear as People Tags in the Organizer.
However, if I save the Metadata to the file, People Tags just seem to be added as IPTC/Core Keywords. I was hoping that PE12 would at least support the Metadata Working Group's Face Region standard, and that People Tags would be saved as XMP using the MWG-RS schema.
Would someone more familiar with PE12 please confirm whether PE12 does or does not support the MWG standard?
If it doesn't support it, then that's a disappointment, particularly considering the standard has been around since November 2010, and that Adobe is a founding member of the Metadata Working Group.

The point about whether to use an automatic process or not is a separate issue. I can understand that some people would not want to use it. However, even doing it manually in PE12 does not use the MWG standard.
Thanks for the pointer to the thread, which I note was started 2 years ago, with the last comment a year ago.
From that, I draw the conclusion that the PE developers see this as a very low priority. All the more reason for me to look at competitor products that do support this standard (e.g. Picasa and Photo Supreme).
Thanks again.

Does Netweaver 7.0 support the AL32UTF8 character set?

We are running Netweaver 7.0 for a Vendavo solution running on Oracle 10.2. We have created the Vendavo schema within the same database as Netweaver. Vendavo documentation states the character set be AL32UTF8. SAP sets the character set on Netweaver install to just UTF8. Does anyone know if Netweaver 7.0 supports changing the DB character set to AL32UTF8?
Thanks.

Hi,
Yes you can as AL32UTF8 is a superset of UTF8 - this is supported. Please check the following note.
https://service.sap.com/sap/support/notes/456968
The above note also discusses how to change database character sets.
Also check the following FAQ SAP Note on Oracle Character Sets.
https://service.sap.com/sap/support/notes/606359
Moreover the SAP NW 7 installation sets the Oracle NLS to UTF8 which is find. Note NLS and Database character set is not the same,please check the following sap note for the same.
https://service.sap.com/sap/support/notes/669902
Hope this helps.
- Regards, Dibya

Does Galaxy Note 3 support the latest Flash Player? [was: note3]

Galaxy note3 version 4.3 is it supported by flash player lastest version xx.xxx.xx.81?
[Subject line edited by moderator for clarity]

Mike M wrote:
Trey Carey wrote:
quek peow wrote:
Galaxy note3 version 4.3 is it supported by flash player lastest version xx.xxx.xx.81?
[Subject line edited by moderator for clarity]
I feel so bad for you, you should use HTML5. It works great, iuf you need some HTML5 player code ill post it.
I feel pretty badly for you. As a web designer, I know that HTML5 (HyperText Markup Language version 5) is a standard for the design compliance of the code in web pages, and NOT a player. There is no such thing as user installable "HTML5 player code", as you describe it. Either a browser is standards compliant, or it isn't. You can't just put a plug-in into it and make it do something the engine is incapable of.
No, I wasnt implying you install some app or anything, if any webpage you visit is used as a HTML5 player then android should be able to play the video. I have had great sucess with HTML5, Code such as:
<!doctype html> <html> <head> <meta charset="utf-8"> <title>HTML5 with Video</title>  </head> <body>  <video width="500" height="325" poster="Your_poster_image.jpg" controls>  <source src="http://techslides.com/demos/sample-videos/small.webm" type="video/webm"> <source src="http://techslides.com/demos/sample-videos/small.ogv" type="video/ogg"> <source src="http://techslides.com/demos/sample-videos/small.mp4" type="video/mp4"> NOTE: If you see this, you're using an outdated browser that doesn't support the video tag. </video>  </body> </html>

Does Weblogic 5.1 support the STANDARD javax.servlet.request.X509Certificate attribute?

Hello!
My strong suspicion from looking at the Weblogic SSL documentation on
http://e-docs.bea.com is that WebLogic SSL does not put any client-side
certificates into the 'javax.servlet.request.X509Certificate' attribute
of a servlet's HttpServletRequest (as an array of
java.security.cert.X509Certificate instances).
Currently, it appears that Weblogic uses a proprietary attribute name
('weblogic.security.somethingOrOther') and returns instances of the
deprecated Java 1.1 java.security.Certificate class.
When will Weblogic support this aspect of the Servlet 2.2 specification,
if it doesn't already?
Regards,
James W.

I just verified this with the Java doc. Either the Java documentation is
incorrect or we are still using the older version of the certificate
encoding class. I will check on this, we may have fixed it in a subsequent
service pack.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"James Webster" <[email protected]> wrote in message
news:[email protected]..
Hello!
My strong suspicion from looking at the Weblogic SSL documentation on
http://e-docs.bea.com is that WebLogic SSL does not put any client-side
certificates into the 'javax.servlet.request.X509Certificate' attribute
of a servlet's HttpServletRequest (as an array of
java.security.cert.X509Certificate instances).
Currently, it appears that Weblogic uses a proprietary attribute name
('weblogic.security.somethingOrOther') and returns instances of the
deprecated Java 1.1 java.security.Certificate class.
When will Weblogic support this aspect of the Servlet 2.2 specification,
if it doesn't already?
Regards,
James W.

Does MSI P67A-C45 supports the latest Sandy bridge Celeron (G530,540 etc)

Hello all,
Firstly, I'm the new user here, and I found this forum when I'm in the process of 'googleing' for my new system problems...
Okay, I'm the 'proud' user of MSI P67A-C45 motherboard and due to some sort of fund problems, I just bought this mobo and use the lowest end Sandy Bridge line processor, which is Celeron G540 processor. After getting the enough money somewhere around March next year, I will straightly change my processor to Core i5-2500K (which I assume it will be more cheaper than now)... After installing everything on my new rig, suddenly there are no BIOS shown up at all. The power is available, all of the LED's as well as my heat sink fan are running finely. I'm suspecting that this kind of mobo does not support Celeron G540 processor... So how? Anyone here can help me to resolve this problems... It really ruined my day and now I'm typing this on my netbook which irritating.... Some of my friends said that it must be BIOS related problems... because Celeron is just launched recently and perhaps the BIOS bundled with my motherboard are the older one..... Below is my full rig specification...
Processor : Intel Celeron G540 Processor
Motherboard : MSI P67A-C45 (B3)
RAM : Corsair Value RAM 8GB DDR3 1333MHz (two sticks of 4GB RAM each)
GPU : Sapphire HD6750
Power SUpply : Xigmatek NRP-PC502 500W
Casing : CM Elite 431
HDD : Samsung Spinpoint F3 1TB
SSD : Mushkin 60GB SATA-III SSD
** Planning to replace send back the celeron to the seller and change it to Core i3-2100, Core i3 is usable or not with this mobo?
Thanks guys and I really apologize for my bad English... It's not my mother-tongue language actually

Quote from: Henry on 26-December-11, 07:54:09
You have BIOS 1.9 which should support all of the CPU's you mentioned.
Have you plugged in the 4 pin CPU power (JPWR2) on MB & 6 pin to video card PCIe power plugs?
Yes, I already connected 4-pin cpu power as well as 6-pin PCIe power connector both to my motherboard and graphic card, but the system still refuse to shown up the POST screen... :( BTW, I already change the processor from Celeron G540 to Core i3 2100... Waiting for the stock available from the seller...

Does Lightroom 5.7 support the Canon 7D MkII for tethered shooting?

I have two computers with LR 5.7. I can not get the Canon 7d II to do tethered capture on either one. The tethering tool bar flashes between " Canon 7D Mk II" and "No Camera Detected". The 7D MkII is not one of the cameras listed on the Adobe web site that will do tethered shooting. Given that LR5.7 supports that camera for Camera RAW, why wouldn't it also be able to do tethered capture? Or is there something else I'm missing?

According to the document Tethered camera support in Lightroom the new 7d II is not currently supported in Lr 5.7.

Does Firefox 6.0 support the Trend Micro toolbar?

I'm getting update notifications about Firefox 6.0. Having the Trend Micro toolbar integrated into the browser is something I want and am reluctant to update from 5.0 until I know if this feature will be available on the new upgrade.

Ask Trend Micro as to whether they support Firefox 6.0 yet or when they will.

Does TM9.1 SP02 support the check of resource availiability across FROs?

hi TM experts,
In planning or FRO/FU checks of TM9.1 SP02, will system check the current resource has been used in another document at the same time or whether it is in the downtime? If the answer is YES, in which topic I can find in the application help for this kind of infomration?
Regards,
Cain Sun

Hi Eric,
I checked the note, but the description is too general to give me any useful information, could you introduce how to use that functionality?
Thanks & best regards
Sensen

Does DS 5.2 support the PKIX schema defined in RFC2587?

Similar Messages

Maybe you are looking for