Does ENV3 require data now or not?

In another post an employee stated no data anymore for the ENV3 but when you browse phones it clearly states next to it $9.99 data plan or higher so which is it? Website not update maybe to reflect this? Thinking of ordering 2 and want to be sure before I do. Mary

I'll tell you what I found out yesterday for my Env touch. I believe that is in the same category as your phone.
I called the *611 line and was greeted by an Representative. She kept insisting that I needed a data plan for my phone if I deactivate and reactivated my phone. She also told me that SOMETIMES the system lets you get rid of the data plan and sometimes it doesn't. .....I don't know about you, but I find this extremely hard to believe. A computer won't just RANDOMLY let you do something like this so I feel like they are hiding something. The lady also mentioned something about a data block potentially working. After awhile, I eventually hung up because I was obviously getting no where on the phone.....Mind you, I had my Env Touch way before a data plan was 'required' for it. I also told the Representative that.
SOOOOOO then I did something that I normally don't do. I went to a physical verizon store and talked to a Manager. Here is what the Manager told me. "The Env Touch does NOT require a data plan anymore."(Yes, that was WORD FOR WORD) All you have to do is get a data block when you activate it. (paraphrased)
It seems that Verizon is trying to coerce people into thinking that they need a data plan for these phones when you really don't.
My advice: Go to a physical verizon store and ask. If they insist no, mention the data block. If you're still not getting anywhere, go to a different verizon store and try the same thing.

Similar Messages

Stock for required data does not exist during repack of product

Hello,
I have the given situation, during the packing of a product (which is unpacked) in the Work Center I get the following error message:
"Stock for required data does not exist
Message no. /SCWM/L3104"
After a debugging session we have found the cause as being the field FLGAVQ (Indicator: Handling Unit Contains an Available Quantity) in the structure /SCWM/S_HUHDR_INT. My question is if somebody knows from where this mark comes and if you stumbled on the same problem and if so how did you manage?
All the best,
Claudiu Maxim

Hello Sridhar,
Thanks for the response, the packing operation in our case is done in the SCM EWM environment in the specific Work Center. The transaction with which we pack is /SCWM/PACK - Packing - General. Do you have a solution for this problem with regards to the EWM environment?
All the best,
Claudiu Maxim

The '' secondary data source is not a relational data source, or does not use an OLE DB provider.

Hi,
We are using Teradata as data source in SSAS 2008R2, it’s using ‘.Net Providers\.Net Data Provider for Teradata’.
In DSV, we have two data sources both using Teradata. While processing dimensions, all dimensions coming from secondary data source has error message”
The '' secondary data source is not a relational data source, or does not use an OLE DB provider.”
But we are not using OLE DB provider for now, we’ve searched some threads that named queries can be replaced for secondary ds, but since we have a lot of tables, it’s hard to implement using named queries.
Any inputs would be appreciated.

Hi memostone,
When defining a data source view that contains tables, views, or columns from multiple data sources, the first data source from which you add objects to the data source view is designated as the primary data source (you cannot change the primary data
source after it is defined). After defining a data source view based on objects from a single data source, you can then add objects from other data sources.
If an OLAP processing or a data mining query requires data from multiple data sources in a single query, the primary data source must support remote queries using
OpenRowset. Typically, this will be a SQL Server data source.
Here are the restrictions:
The primary data source should be SQL Server and support OpenRowset to the secondary data source.
Or you design the cube in such a way that rocessing for each object only needs to access data from a single data source
I recommand you refer to the following article:
Defining a Data Source View (Analysis Services):
http://technet.microsoft.com/en-us/library/ms174600.aspx
Regards,
Bin Long
TechNet Community Support

Image drag drop not working in scaffholding. Does it require soem setting?

image drag drop not working in scaffholding. Does it require soem setting?

Hello Manoj,
The scaffolding teamplate which you use to create scaffolding page is actually a design prototype which helps you to create similar types of pages instances very quickly without authoring each page separately (for example news, aticle types of pages) and that is the concept of scaffolding only.
For example - When you go to location http://localhost:4502/miscadmin#/etc/scaffolding/geometrixx you will see a "News" page which is an example of scaffolding (this is a similar page which you can create using scaffolding template).
Now if you open this page you will be accessing http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html and here you will see already design page.
     1. if you access page properties from side kick you will see how this page is configured using target template and target path
     2. if you go to design mode using side kick you will see how the component has been design (which is similar to what appears on page when you came first time)
     3. Now come back to normal view of that page (http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) and author this page with some dummy property and click on "create" button. I know here you can not author the image as it comes as disabled empty box.
     4. once you author the content and click on create button it will create an instance of scaffolding page on the same page you can see the link on the top of same page.
     5. Now access that page, when you access that page the page will take reference of target template you configured using pare preoperties to display the page.
     6. On this page you will see the same component you configured and when you will edit it you can author the image from there directly.
Now question is why to configure same component two times half data from scaffolding and half data from page but answer is the design is correct because the page design which you have created (for example http://localhost:4502/cf#/etc/scaffolding/geometrixx/news.html) is just proto type to create actual page instances and prototype can not holds values for page instance (specially image until it doesnt configured correctly for page instance in this case) which exist only when you create pages using the scaffolding page prototype. Otherwise you have to do more customization by extending scaffolding "/libs/wcm/scaffolding" changing the code and design OR you have to design it according to your target page strtucture which you have configured in page properties (specially image node).
If you want to create your own page prototype using scaffolding template and want image to associate just copy paste "/etc/scaffolding/geometrixx/news/jcr:content/dialog/items/items/tab2" node to your newly created scaffolding page prototype.
for more information on scaffolding just refer -http://dev.day.com/docs/en/cq/current/wcm/scaffolding.html
I hope it clarifies your question and help you to proceed. Let me know if you need more information or help.
Thanks,
Pawan

Automator: Watermark PDF Documents not supplied required data?

I want to create a letterhead background on a Numbers document so I can email a Numbers document on my letterhead. I haven't found an easy answer so far until I came across the Watermark PDF Document feature in Automator. That would work perfectly, problem is, I can't get it to work at all. No matter what I have added, subtracted or rearranged I get the same results....The action "Watermark PDF Document" was not supplied with the required data. I'm really not sure what I'm doing wrong. Can someone walk me through what it is suppose to look like? I want it as a printer workflow so I can just take the document I'm working on in Numbers, go to the print menu, as if I was going to "print" it in to Preview, and it will convert it to PDF then put the watermark on it. I have done lots of research to try and figure out what I am doing wrong...and I hope it's something really silly because I am getting so frustrated.
Thanks!

I couldn't find the QuickLook folder but I took a screen shot.
What I am asking for is someone to tell me what the workflow should look like.
I have tried
-Get Specified Finder Items
-Launch Application (Preveiw)
-Watermark PDF Documents
-Move Finder Items
-Rename Finder Items/Rename PDF Documents
-View Results
..and all combinations of those items. I tried Watermark PDF Documents by iteslef as a Print Plugin...it gets to Preview but there is no watermark.
No matter what I try the same result happens "The action 'Watermark PDF Documents' was not supplied with the required data."
I have tried JPEG and PNG images, several different files with different sizes, shapes and colors. I even tried the images you supplied above. It never works.
I'd love for someone to be able to make it work on their computer then tell me how they did it so I can duplicate it. If if still doesn't work for me then I'll know it's something to do with my computer.

HT203548 I'm having problems with Siri on my iPhone 6. It worked briefly yesterday and now its not doing anything. I have turned phone off and on and made sure everything is on in settings. Please help!

I'm having problems with Siri on my iPhone 6. It worked briefly yesterday and now its not doing anything. I have turned phone off and on and made sure everything is on in settings. Please help!

Do you have an active data connection (wifi or cellular)? Have you tried resetting the phone by pressing and holding the Home and power buttons until the apple appears (this is different than just turning it off and back on).

Requirements date for VSF -- why not on first of month?

Please help me understand this peculiar system behavior.
MD04 routinely displays the plant/materialu2019s planned independent requirement as a u201CVSFu201D having a requirements date of the first work-day of the period.
What I cannot explain is why the October 2012 VSF has a requirements date of September 21, 2012. Why would the date not be October 1, 2012? The factory calendar assigned to the plant has October 1, 2012 as a work-day.
Same situation for December 2012. The VSF for December has a requirements date of November 21, 2012.
For the rest of 2012, and for the first three months of 2013, the VSF elements are dated on the first work-day of the month. What would cause the requirements to fall a week and a half early for October and December 2012?
By the way, I am not very fluent in MRP, so please do not assume that I have ruled out something obvious.
Regards,
zKen

Well, we figured it out. The problem was the fiscal year variant.
A few years ago, we were a nine-to-five, Monday-thru Friday kind of company. As such, the accounting periods were carefully managed so that a period never ended over a weekend or on a holiday. Nowadays, we are a 24-7 operation, and accounting periods correspond to calendar months.
But when we changed over the fiscal year variant, it was only set up thru 2011. 2012 still had the old period strategy.
On the MRP3 tab of the material master record, material/plants are assigned the period indicator u201CPu201D, Period according to fiscal year variant. We forecast by periods in S608.
MRP was just doing its thing and determining requirements according to our accounting periods and setting the requirements date accordingly.
Solution: correct the fiscal year variant out for a few more years. Transport, reload the forecast data, transfer to demand management, and run MRP.
All is well in the stock/requirements list.
Edited by: zKen on Nov 22, 2011 3:27 PM

I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working?

Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...

Why am I now receiving the error 42404: a required iTunes component is not installed after the 10.5.3 iTunes update? Now, I cannot sync my iphone...I have uninstalled and re-installed several times now without any luck.
Thanks,

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6 and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previou

I downloaded latest software on iphone 4 and installed new software on my imac (snow leopard 8.6)and now phone not synching with new itunes. Itunes does recognize the phone but the itunes is totally different now. It doesn't look anything like the previous vesions. I can't even find a tab for synching. very strange. any help is appriciated.

iTunes 10.7 is compatible with Snow Leopard.
You can download it here: http://www.apple.com/itunes/

Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin Nambiar

If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

I recently downloaded the latest iTunes and now keep getting the error message "A required iTunes compnent is not installed. Please re-install iTunes (-42404). I have re-installed 10x and still no luck. iTunes will not sync with my iPad. Can anyone hel

I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

I have a 4s Iphone and want to add a date and time stamp to photos taken on the regular camera installed on the phone. Does this require a separate app?

I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?

For such to be visible, yes. Many such apps in the app store.

HT5815 The most important piece of info about an update I need is how much data does it require. I am travelling and using prepaid data. I cannot even consider an update until I know how much data it will use. Please provide this information.

The most important piece of info about an update I need is how much data does it require. I am travelling and using prepaid data. I cannot even consider an update until I know how much data it will use. Please provide this information.

http://www.apple.com/feedback/macosx.html

Does ENV3 require data now or not?

Similar Messages

Maybe you are looking for