Does HCP support OAuth 1.0 authentication with a server

Hi,
I want to call a service (destination) which supports OAuth 1.0 authentication only at present. is this supported in HCP?
Thanks,
Vipin

Hello,
You will need to install Adobe Digital Editions which will solve this issue. .acsm files only open with Digital Editions. Also, if you import all of your previously purchased books with Digital Editions, they will be migrated automatically. Digital Editions can be downloaded for free from:
http://www.adobe.com/products/digitaleditions/
Best,
Nick

Similar Messages

Server does not support PLAIN or LOGIN authentication

I try to send mail via XI Mail adapter. My settings are below
Transport protocol : SMTP
Message protocol : XIPAYLOAD
url : smtp://10.44...
Authentication Method : Plain
User : ...
Password...
From :
To : ....
But i give this error "server does not support PLAIN or LOGIN authentication"..
I think I use SSL or something else, but I dont know how to do by using Mail adapter..
Or Why do i get this error ?
Thanks

Hello Tuncer,
In your case, you need to first enable SSL on your PI server, which requires some effort. Here are the links for SSL configuration for AS ABAP and AS Java:
http://help.sap.com/saphelp_nw70/helpdata/en/0d/a22640632cec01e10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/56/a12640632cec01e10000000a155106/content.htm
After that, you need to exchange client certificates between your PI and mail server so that the two systems will accept each other's logon tickets. Only after that you can use your mail adapter with SSL. All adapters that run on the adapter engine use Java AS's authentication mechanisms, so SSL should be enabled for your AS Java, you cannot enable it only for the mail adapter.
I recommend trying this scenario with another mail server that doesn't require SSL first with plain authentication. Then you can go for SSL, but you will probably need an experienced basis guy to help you for the configuration.
Hope this helps,
Regards / selamlar
Gökhan

Does ASA Support Android Hybird RSA Authentication ?

Dear all
Does ASA Support Android Hybird RSA Authentication ?
I should be such as to set the ASA firewall, let him support Android VPN Hybrid mode under my settings
tunnel-group IPsec_Hybird_Tunnel general-attributes
default-group-policy Android_Hybird
authorization-required
tunnel-group Android_Hybird_Tunnel ipsec-attributes
ikev1 pre-shared-key **********
chain
ikev1 trust-point CA
ikev1 user-authentication hybrid
tunnel-group Android_Hybird_Tunnel ppp-attributes
authentication ms-chap-v2
crypto ikev1 policy 10
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
when i debug find this message
%ASA-7-713906: IP = 1.1.1.1, All SA proposals found unacceptable

I've managed to configure IPSEC hybrid(Mutual group Authentication) with the Cisco VPN client, which uses a pre-shared key and CA certificate as well as Xauth. When using "IPSec Hyrbid RSA" on an an Android device, my attempts to configure it on the ASA have failed.
Log message:
3
Jul 25 2013
20:39:54
713048
IP = 192.168.7.76, Error processing payload: Payload ID: 1

Error in authentication with ldap server with certificate

Hi,
i have a problem in authentication with ldap server with certificate.
here i am using java API to authenticate.
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: timestamp check failed.
I issued the new certificate which is having the up to 5 years valid time.
is java will authenticate up to one year only?
Can any body help on this issue...
Regards
Ranga

sorry i am gettting ythe same error
javax.naming.CommunicationException: simple bind failed: servername:636 exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: timestamp check failed]
here when i am using the old certificate and changing the system date means i can get the authentication.
can you tell where we can concentrate and solve the issue..
where is the issue
1. need to check with the ldap server only
2. problem in java code only.
thanks in advance

Virtual Sound does not support my Satellite A100-998 with Vista

Hi.
I have Satellite A100-998, and yesterday i find for my laptop available new driver. I download Virtual Sound for my laptop and for vista and when i try install driver i have error "Toshiba Virtual Sound does not support your computer." Why
Ps. Sorry for my bad English, but please help me!

Hi,
had you "Virtual Sound" before? If no, then your machine has probably NO "Virtual Sound". But if yes, then check if you downloaded the appropriate driver for your machine, because there are some many variations of the machine you have, and some of these machines have absolutely different hardware.
Which operating system is on your machine installed?
Greets

The files are on a volume that does not support trash message that appears with Lightroom 3

When I try to delete photos on LR3, this message appears. This did not happen when I first installed this over a year ago. How do I fix this?

I contacted Adobe support, I was told to rename my preference files for lightroom, I did, and then I ended up with the original plist files and the renamed ones, and the same problem. The guy I talked to at Adobe said that this was an issue with Mac/Lion. I then contacted Apple, who said that this was not their application and that there was nothing they could do.

Does Sol8 support IDE's hard disk with more than 8Gb?

Hi
Please help me can Sol8 detect IDE's disk >8Gb to install ?

Yes, Solaris 8 can support > 8GB disk. But you will find the problem, if you try to install Web Start.
Ramesh

ASA Remote Access Authentication with LDAP Server

Thank you in advance for your help.
I am configuring an ASA to authenticate with a ldap server for ipsec vpn access. My customer has 3 networks that are to be accessed by remote users. However they want to be able to say that one user can get to 2 of the networks and not the 3rd. So basically they want control over what network behind the firewall each user can access. This seems doable from my reading and I had planned to creating a group for each network that needs accessible and either do attribute maps to each group with a separate group created on the ldap server for authentication. Basically a ldap group on the ldap server that will have the users name in the group in order for access. I can restrict access via acl's or filtering to force my group to only be allowed access to a specific network. Here is the problem I am having now.
The ldap server has been created and seems to be working fine. I have created my AAA groups and servers and I have done the ldap test with a test user vpntest and a password on the ldap server. When I run the authentication test from the ADSM or command line I get a good authentication successful message. So I configured a vpn client remotely and attempted to authenticate to this group and it says there is no user by that name. Below is a paste of the debug. The second part is when I did a successful test from the ASDM or CLI and it worked great. The first part is when I attempted from the vpn client. It all looks the same from the search criteria. What am I missing here or does anyone more knowledgeable see anything that I am doing wrong. Can this be done this way or should I try radius. The customer was just adament about using ldap.
extvpnasa5510#
[243] Session Start
[243] New request Session, context 0xd5713fe0, reqType = 1
[243] Fiber started
[243] Creating LDAP context with uri=ldaps://130.18.22.44:636
[243] Connect to LDAP server: ldaps://130.18.22.44:636, status = Successful
[243] supportedLDAPVersion: value = 2
[243] supportedLDAPVersion: value = 3
[243] No Login DN configured for server 130.18.22.44
[243] Binding as administrator
[243] Performing Simple authentication for to 130.18.22.44
[243] LDAP Search:
        Base DN = [ou=employees,o=msues]
        Filter = [uid=vpntest]
        Scope   = [SUBTREE]
[243] User DN = [uid=vpntest,ou=employees,o=msues]
[243] Talking to iPlanet server 130.18.22.44
[243] No results returned for iPlanet global password policy
[243] Fiber exit Tx=386 bytes Rx=414 bytes, status=-1
[243] Session End
extvpnasa5510#
[244] Session Start
[244] New request Session, context 0xd5713fe0, reqType = 1
[244] Fiber started
[244] Creating LDAP context with uri=ldaps://130.18.22.44:636
[244] Connect to LDAP server: ldaps://130.18.22.44:636, status = Successful
[244] supportedLDAPVersion: value = 2
[244] supportedLDAPVersion: value = 3
[244] No Login DN configured for server 130.18.22.44
[244] Binding as administrator
[244] Performing Simple authentication for to 130.18.22.44
[244] LDAP Search:
        Base DN = [ou=employees,o=msues]
        Filter = [uid=vpntest]
        Scope   = [SUBTREE]
[244] User DN = [uid=vpntest,ou=employees,o=msues]
[244] Talking to iPlanet server 130.18.22.44
[244] Binding as user
[244] Performing Simple authentication for vpntest to 130.18.22.44
[244] Processing LDAP response for user vpntest
[244] Authentication successful for vpntest to 130.18.22.44
[244] Retrieved User Attributes:
[244]   sn: value = test user
[244]   givenName: value = vpn
[244]   uid: value = vpntest
[244]   cn: value = vpn test user
[244]   objectClass: value = top
[244]   objectClass: value = person
[244]   objectClass: value = organizationalPerson
[244]   objectClass: value = inetOrgPerson
[244] Fiber exit Tx=284 bytes Rx=414 bytes, status=1
[244] Session End

Hi Larry,
You can map AD group memberships to specific group policies on the ASA, you can find that configuration here:
- http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/91831-mappingsvctovpn.html
Let me know if further assistance is required!
Please proceed to rate and mark as correct the helpful Post!
David Castro,
Regards,

Perimeter authentication with ISA server and AD

Hi,
We have a Microsoft ISA server that does all authentication at the perimeter. I'm trying to set up a WLS 10 that can inspect and pass on the authenticated Subject to the (SQLServer) database when performing searches.
I have configured the environment according to the steps in [url http://e-docs.bea.com/wls/docs100/secmanage/sso.html], and I have set up my security realm with an Active Directory Authentication provider and a Negotiate Identity Assertion provider. But soemthing is obviously not working, since I see no signs of the authenitcated subject in the server log, and Security.getCurrentSubject() returns an empty Subject. What am I doing wrong?
Thanks
Edited by tdirrenb at 04/18/2008 6:33 AM
Edited by tdirrenb at 04/18/2008 6:34 AM

Hi Vinod,
Looks like this is a AAA issue. Moving this to AAA domain for faster response.
thanks,
Vinay

E-mails will not send. Error Message is "server does not support SSL messages." Is this a server or internet program problem?

The last 3 times - March 9 and 10 - I attempted to send an e-mail, the above quote was in the error message box as the reason the e-mails could not be sent.

try the 2.0.1 update, I just did and it seemed to help with that issue and a few others with email, wi-fi, and a few other areas have improved too...

Web authentication with Radius server problem

Hello,
I'm having problem to web authenticate users via radius server for one WLC. Here is the outpu from WLC:
*emWeb: Mar 26 14:17:31.537: 20:7d:xx:xx:d8:f0 Username entry (aaaaaa) created for mobile, length = 7
*emWeb: Mar 26 14:17:31.537: 20:7d:xx:xx:d8:f0 Username entry (aaaaaa) created in mscb for mobile, length = 7
*aaaQueueReader: Mar 26 14:17:31.537: Unable to find requested user entry for aaaaaa
*aaaQueueReader: Mar 26 14:17:31.537: ReProcessAuthentication previous proto 8, next proto 1
*aaaQueueReader: Mar 26 14:17:31.537: AuthenticationRequest: 0x1e08eb94
*aaaQueueReader: Mar 26 14:17:31.538:   Callback.....................................0x10908d90
*aaaQueueReader: Mar 26 14:17:31.538:   protocolType.................................0x00000001
*aaaQueueReader: Mar 26 14:17:31.538:   proxyState...................................20:7D:xx:xx:D8:F0-00:00
*aaaQueueReader: Mar 26 14:17:31.538:   Packet contains 11 AVPs (not shown)
*aaaQueueReader: Mar 26 14:17:31.538: apfVapRadiusInfoGet: WLAN(1) dynamic int attributes srcAddr:0x0, gw:0x0, mask:0x0, vlan:0, dpPort:0, srcPort:0
*aaaQueueReader: Mar 26 14:17:31.538: 20:7d:xx:xx:d8:f0 Successful transmission of Authentication Packet (id 67) to 10.xx.33.249:1645, proxy state 20:7d:xx:xx:d8:f0-00:01
*aaaQueueReader: Mar 26 14:17:31.538: 00000000: 01 43 00 8c 48 7c a7 ff df 06 53 30 c0 be e1 8e .C..H|....S0....
*aaaQueueReader: Mar 26 14:17:31.538: 00000010: d7 fd 8b d3 01 09 73 65 66 72 73 76 65 02 12 7b ......aaaaaa..{
*aaaQueueReader: Mar 26 14:17:31.538: 00000020: ae 2e f5 eb fa cf f5 cc 3b 08 65 d7 04 0e ba 06 ........;.e.....
*aaaQueueReader: Mar 26 14:17:31.538: 00000030: 06 00 00 00 01 04 06 0a 2e 09 14 05 06 00 00 00 ................
*aaaQueueReader: Mar 26 14:17:31.538: 00000040: 0d 20 0d 73 65 76 73 74 2d 6c 77 63 31 30 3d 06 ...xxxxx-lwc10=.
*aaaQueueReader: Mar 26 14:17:31.538: 00000050: 00 00 00 13 1a 0c 00 00 37 63 01 06 00 00 00 01 ........7c......
*aaaQueueReader: Mar 26 14:17:31.538: 00000060: 1f 0e 31 39 32 2e 31 36 38 2e 31 2e 36 31 1e 0c ..192.168.1.61..
*aaaQueueReader: Mar 26 14:17:31.538: 00000070: 31 30 2e 34 36 2e 39 2e 32 30 50 12 95 11 7c d9 10.xx.9.20P...|.
*aaaQueueReader: Mar 26 14:17:31.538: 00000080: 75 8e 01 6e bf 62 38 f8 38 ab 68 4a              u..n.b8.8.hJ
*radiusTransportThread: Mar 26 14:17:31.603: 00000000: 03 43 00 14 e5 8c e7 75 52 04 af e0 07 b7 fb 96 .C.....uR.......
*radiusTransportThread: Mar 26 14:17:31.603: 00000010: c1 4a fb 40                                       .J.@
*radiusTransportThread: Mar 26 14:17:31.603: ****Enter processIncomingMessages: response code=3
*radiusTransportThread: Mar 26 14:17:31.603: ****Enter processRadiusResponse: response code=3
*radiusTransportThread: Mar 26 14:17:31.603: 20:7d:xx:xx:d8:f0 Access-Reject received from RADIUS server 10.xx.33.249 for mobile 20:7d:xx:xx:d8:f0 receiveId = 0
*radiusTransportThread: Mar 26 14:17:31.603: ReProcessAuthentication previous proto 1, next proto 2
*radiusTransportThread: Mar 26 14:17:31.603: AuthenticationRequest: 0x1da9fa4c
*radiusTransportThread: Mar 26 14:17:31.603:    Callback.....................................0x10908d90
*radiusTransportThread: Mar 26 14:17:31.603:    protocolType.................................0x00000002
*radiusTransportThread: Mar 26 14:17:31.603:    proxyState...................................20:7D:xx:xx:D8:F0-00:00
*radiusTransportThread: Mar 26 14:17:31.603:    Packet contains 11 AVPs (not shown)
*radiusTransportThread: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Returning AAA Error 'No Server' (-7) for mobile 20:7d:xx:xx:d8:f0
*radiusTransportThread: Mar 26 14:17:31.605: AuthorizationResponse: 0x2dd03648
*radiusTransportThread: Mar 26 14:17:31.605:    structureSize................................32
*radiusTransportThread: Mar 26 14:17:31.605:    resultCode...................................-7
*radiusTransportThread: Mar 26 14:17:31.605:    protocolUsed.................................0x00000002
*radiusTransportThread: Mar 26 14:17:31.605:    proxyState...................................20:7D:xx:xx:D8:F0-00:00
*radiusTransportThread: Mar 26 14:17:31.605:    Packet contains 0 AVPs:
*emWeb: Mar 26 14:17:31.605: Authentication failed for aaaaaa
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Username entry deleted for mobile
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Plumbing web-auth redirect rule due to user logout
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 192.168.1.61 WEBAUTH_REQD (8) Deleting mobile policy rule 42461
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Adding Web RuleID 42464 for mobile 20:7d:xx:xx:d8:f0
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 Web Authentication failure for station
*emWeb: Mar 26 14:17:31.605: 20:7d:xx:xx:d8:f0 192.168.1.61 WEBAUTH_REQD (8) Reached ERROR: from line 5069
That was pretty clear for me that Radius is refusing to give user access.
Fully-Qualified-User-Name = NMEA\aaaaaa
NAS-IP-Address = 10.xx.9.20
NAS-Identifier = xxxxx-lwc10
Called-Station-Identifier = 10.xx.9.20
Calling-Station-Identifier = 192.168.1.61
Client-Friendly-Name = YYY10.xx
Client-IP-Address = 10.xx.9.20
NAS-Port-Type = Wireless - IEEE 802.11
NAS-Port = 13
Proxy-Policy-Name = Use Windows authentication forall users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = YYYYY Wireless Users
Authentication-Type = PAP
EAP-Type = <undetermined>
Reason-Code = 66
Reason = The user attempted to use an authentication method that is not enabled on the matching remote access policy
That output is from WLC 5508 version 7.0.235
What is strange, that user was able to authenticate from other before refresh WLC 4402 ver 4.2.207. I cannot change WLC because of AP which cannot run old version.
this is output from working client connection from old WLC
NAS-IP-Address = 10.xx.9.13
NAS-Identifier = xxxxx-lwc03
Client-Friendly-Name = YYY10.46
Client-IP-Address = 10.xx.9.13
Calling-Station-Identifier = 192.168.19.246
NAS-Port-Type = <not present>
NAS-Port = <not present>
Proxy-Policy-Name = Use Windows authentication for all users
Authentication-Provider = Windows
Authentication-Server = <undetermined>
Policy-Name = YYYYY Wireless Guest Access
Authentication-Type = PAP
EAP-Type = <undetermined>
I know there is different Policy Name used, but my question is why it is not using the same as on old WLC when configuration is same.
Is there any way I can force users to use different policy from WLC or AP configuration or is this solely configuration of Radius?
Is it maybe problem of version 7.0.235?
Any toughts would be much appriciated.

Scott,
You are probably right. The condition that is checked for the first policy name (we have 2) is to match
NAS-Port-Type = Wireless - IEEE 802.11, and this is basically used to differentiate guests from other company users.
as you can see from the logs the one that is working correctly is not sending NAS-Port-Type. The question is why.
As I said before.
WLC 5508 ver. 7.0.235 is sending NAS-Port-Type
WLC 4402 ver. 4.2.207 is not.
The same user was working OK on 4402 WLC and after refresh and associating APs to 5508 it all broke, so client did not changed anything on adapter.

Performing User authentication with php server

How to perform user authentication and keep track of logged
in users ? I have the login form saved in one AIR page. I could do
an ajax request to authenticate the user. However, how to keep
track of the user after being logged in, so that when moving to
other pages, he doesn't need to login again ?

Hi,
Cookies work in an Adobe AIR HTML application. You can use
cookies to track your session.

Does the makeRequest() function support oauth?

Hey there,
I want to use the makeRequest() function with oauth as authorization type. But unfortunately there are no information about the supported authorization types.
I found a documentation of an open source projekt, which implements a makeRequest() function too. It has the same signature and they use the same structure of parameters including oauth support. So I tried to use this with Streamwork, but it didn't work (at least there is no constant "com.streamwork.io.AuthorizationType.OAUTH").
Therefore my question ist does Streamwork support oauth for the makeRequest()-function?
Thanks
Hendrik

Its correct to say that we don't have native OAuth support currently. Its on our roadmap.
I have successfully connected to a 3Legged OAuth type service once when I was doing some POC to connect to Box.net's web service.
I think what you are looking for is the equivelant of the OpenSocial makeRequest which we don't currently have.
Can you share your usecase so I can properly prioritize your request?

Does ARD support many client using one server separately simultaneity?

Does ARD support more than one client using one server separately simultaneity, like Remote Desktop on Windows?
Thank you!
Message was edited by: tohy

Thanks for your reply. Does Mac OS X (or server) supports the function that different accounts remote login in simultaneously and use the applications separately at the same time?

Portal integration with Exchange server 2003 issues.

Hello,
We are using NW04s EP 7.0 SP16 and Exchange server 2003. We are trying to perform OWA and Groupware integration. Both the servers are in the same domain.
I have followed all the steps in the notes and documents available there in SDN. There are few issues:
1) The latest KerbMap filter has been configured in Exchange backend server. SAP note 785343 says that the exchange frontend server needs to be configured for anonymous authentication to enable pass-through authentication. But doing this breaks the form based authentication in exchange server, and it also poses security risk when the backend exchange server is behind the firewall. How do we enable pass-through authentication so that the exchange frontend passes the mysapsso2 cookie to the exchange backend server?
2) When I try to create an appointment or try to view the appointments, it gives an error message saying " No logon data found for system Exchange". The Exchange system has been configured for SAP Logon Ticket, and the user mapping fields were left empty. Why should it prompt for user mapping when the logon method is "SAP Logon Ticket"?
There are many documents out there, but none is the latest with clear steps. Can anyone point me in the right direction please?
Thanks,
~Yasin

As far as I remember, when Exchange 2003 is installed on a Domain Controller, it uses the local DC as a GC. You need to set back the 2003 DC as GC and restart it.
I believe, you are aware that demoting/promoting a DC with Exchange server on it is not supported by MS. The best approach is to:
Introduce an Exchange 2010 member server
Move all resources from Exchange 2003 to Exchange 2010
Decommission Exchange 2003
Demote the 2003 DC
Step by Step Screencasts and Video Tutorials

Does HCP support OAuth 1.0 authentication with a server

Similar Messages

Maybe you are looking for