Does HPE H8-1110 SUPPORT RAID?

I currently have an H8-1110 and would like to know if it supports Raid1.
Before I go get another HDD, I started poking around.
In the setup menu, I get SATA EMULATION of IDE or ACHI... no Raid.
Does this mean I'm out of luck?
This question was solved.
View Solution.

Hi:
I have searched extensively and could not find any information that indicates support for a RAID configuration.
If there is no RAID option in the BIOS, I would not think you can set up a RAID configuration.
Paul

Similar Messages

Does the NF980-G65 support RAID arrays over 2TB?

Looking to build a new machine fro Windows 7 (and switch to 64bit at the same time), and the NF980-G65 seems to be the closest board to my needs, just a quick question, does the onboard raid controller support raid arrays over 2TB in size? I had a look at the manual and it has a section on migrating an array to a size over 2TB which would suggest it does, but I would like some confirmation as to whether it does or not.

I've run into this problem with some raid cards when building servers for work, as they were unable to address raid arrays over 2TB and would not allow the creation of the array, I am wondering if the raid controller has the right level of LBA to create a 2TB+ array. I am aware of the need to use a GPT partition to have a partition of over 2TB.

Re: Does MSI B85I Gaming support RAID?

Quote from: Munchic2206 on Today at 17:20:43Sorry, what do you mean?
I mean there is no mention of RAID on the board spec page http://www.msi.com/product/mb/B85I-GAMING.html#hero-specification

Quote from: Chike on Today at 15:10:44As in the past, because now it does not?
Sorry, what do you mean?

Qosmio X300-14P - Does it support RAID on eSATA port?

The SATA Controller of my Notebook is the Intel(R) ICH9M-E/M SATA AHCI Controller. My question is: does this controller support port multiplying? I want to connect a RAID-Drive on my eSATA but the computer just recognizes one of the two drives. If it is supporting port multiplying: how do I activate or use it?
Thanks

hi phoelling,
you can get further informations on [http://www.intel.com], search for "inte matrix storage device driver".
as far as i know this chipset supports raid "0+1"
how about the readme which comes with this driver?
try this:
- opening storage manager
- klick (right) on the device
- choose create volume
if your external drive has a ready built raid
the OS wont see the seperate drives because the raidfunktion of your external drive shows only one drive to the OS...
please read the manual of your external raid device to check what options you have...

Does HP Proliant ML 110 G6 Supports Raid 5?

I want to purchase HP Proliant ML 110 G6 servers. I want to know does it support RAID 5 and VMWare ESX 4.1 Supports? or not.
Thanks in advance.

Hi:
Below is the link to the quickspecs for the G6.
http://h18004.www1.hp.com/products/quickspecs/13477_na/13477_na.pdf
That should contain all the details for the model.
Looks like it supports Raid 0/1/10
I see no info on VMWare.
I suggest you contact HP at the link below for the country you live in and speak to a technical person.
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
Paul

Does the 6600GT-VTD128 support video capture?

Hi,
I recently purchased an MSI 6600GT-VTD128 video card. The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in. However, I haven't been able to get any video capture to work.
Does the card actually support this functionality? If not, what are the video input connections for? If so, is there some documentation as to how to set it up?
So far, I tried installing the video capture drivers that come with the card. I checked the manual. I checked the MSI web site FAQs. And I searched the forums.
Any help would be greatly appreciated.
Thanks,
Daniel

Thanks Richard. Yes I do have a breakout cable like that. Actually, I described it in my original message. So, I am guessing from your message that you believe that the card should have the capability to capture video.
In my original message, I asked if there was any documentation on setting up the card for video capture. The manual does not describe the procedure, nor does the MSI web site.
There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them. In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
If anyone out there has successfully used this card for video capture, please let me know.

HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

Start here... http://www.apple.com/support/iphone/assistant/itunes/

Does Photoshop CC not support touch on Windows 8.1 tablet?

Does Photoshop CC not support touch on Windows 8.1 tablet? Stylus nor finger working on canvas. Have all the updates from Windows and Adobe.

Photoshop does not have touch support. however some touch devices drivers have features the can be set to Photoshop Functions. For example
Tablets that have drivers that use Wintab API for pen support can be used with Photoshop Brush Pen support. Tablets that use Microsoft Ink API for pen support can not be used with Photoshop for Adobe does not have support for Microsoft INK API for Adobe states the INK API lack features used by Photoshop Brush engine.

Does Sender Mail Adapter support "PayloadZipBean" module

Hi everyone,
I have a scenario where, I get the email with an zip file as an attachment and I need to extract this file and send across. There is no mapping transformation done here, only I need to forward the attached file to the file server.
Zip file always contains 1 file and is a text file.
so Its an Email to File Scenario.
Can I send the zip file as it is without unzipping i.e., send the attachment as iit is to the file server?
If I want to unzip the file, does the module "PayloadZipBean" support in case of sender mail adapter. ?
Thanks,
Varun

Hi Varun,
Use "PayloadZipBean " Module at Receiver Communication Channel in the Module Tab Set the "Module Key.mode = unzip"
and Receiver communication Channel file should be "FileName.txt".
http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
Regards,
Naga.

Get an Error window, The source folder does not contain any supported camera raw files

I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
Esther

Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

Does K8D Master-FT support Dual core Opteron?

Hi,
Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
Thx, Xuekun

Sorry I only looked after his question.
The entire K8D-Master3 series has support for it: >>Link<<

Does Toshiba Multimedia Center support 5.1 via optical out?

Hello, I have a question before I buy this...
Does Toshiba Multimedia Center support 5.1 via optical out?
I can find this out anywhere they only mention digital out but that could be coax.
Can any of you help me?
Thanks

Hi
As far as I know the Toshiba Media Center supports these feature:
Dolby Digital Surround, Dolby Digital 5.1, EAX ADVANCED HD
_Ports:_
1 x LAN - RJ-45
4 x hi-speed USB - USB Typ A, 4-polig
1 x audio *SPDIF output*
1 x audio - line-In stereo port 3.5 mm
1 x headphones audio output stereo port 3.5 mm
Greats

Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?

Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
If not, is this an option under consideration?

billqaz a écrit:
Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
If not, is this an option under consideration?
It's the default sort order. You can choose chronological order( ascending or descending) or by Import batch or by filename. Contrary to older versions, those sort orders are available not only in thumbnail view, but also in Folders view and albums. In albums you can sort as you like 'custom order'. No difference in Mac or Win.

Does Final Cut Express support ProRes 1080p?

Does Final Cut Express support ProRes 1080p?

Hi(Bonjour)!
ProRes codecs was introduced with Final Cut Studio 2.
You can't create a ProRes sequence in FCE, but if you've installed the +Apple ProRes QuickTime Decoder 1.0 for Mac+ you will be able to import ProRes footage, but rendering or conversion will be needed.
http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
Michel Boissonneault

Does HPE H8-1110 SUPPORT RAID?

Similar Messages

Maybe you are looking for