Does hplip actually require foomatic-db?

Hi, I struggled for an hour to set up an HP Deskjet 3050 J610a connected via WiFi. I had hplip installed, but http://localhost:631/admin gave the cryptic message "Unable to get list of printer drivers: Success". Finally I ran `sudo pacman -Rdd foomatic-db` and was able to install the printer without any more trouble.
So my question is: Does hplip actually require foomatic-db? If foomatic-db-engine is sufficient, foomatic-db should be removed from hplip's dependency list. In fact, it should probably be marked as a conflicting package.

Enterprise manager still requires a static service definition in listener.ora and does not rely on dynamic registration.
From documentation:
The SID_LIST is required for backward compatibility with Oracle8 or Oracle7 databases, as well as external procedures and heterogeneous services, and some management tools, including Oracle Enterprise Manager.
Werner

Similar Messages

Does current Muse version actually require 64bit Windows?

Hi. Does the current (latest) version of Muse actually *require* a 64bit version of Windows? Is there absolutely no way to run current Muse on my 32bit Windows 7 SP1 machine?
I thought Adobe Air was 32bit... ?
thanks

Yes, it's only 64 bit. It no longer runs unfer the Air platform, it's a native application.

Found Posted Elsewhere-Is This Also For S10? Does It Actually Increase Battery Performance?

Thought I read this here, but found this on another forum. Is this for the S10 or is there a specific download?
Does this actually increase battery performance for the S10? Advice/Info appreciated, thanks.
"Hey guys,
like to increase your battery life under Windows XP up to 30%?
Look what I have found
http://www.eweekeurope.co.uk/news/lenov ... etbook-873
Quote: "Battery life is said to be up to 6 hours, with "battery-saving software" helping the S10-2 achieve a 30 percent longer battery life than its predecessor."
And now do the following.
Download and install the following packages:
- Intel Onboard Graphics Driver
- Intel Chipset driver
- Lenovo Energy Management Driver
from the S10-2 driver website:
http://consumersupport.lenovo.com/en/Dr ... ryID=35057
I installed all 3 packages, just to make sure that the most important drivers are up to date!"
That is the psot-thxs.

Hi, with 3 cell and at 3-5 recharge - times reaches full capacity... should last for 2 hours 15 mins ... constantly mid (5 lines ) brightness & wireless on...
Did you read answer in last post ?
http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/3-Cell-S10-Battery-last-Just-Over-An-Hour/td-p...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Internet Download Manager cannot integration with firefox4 itis Look in the menus it works but it does not actually work ?

internet Download Manager cannot integration with firefox4 its Look in the menus it works but it does not actually work

IDM may need to be updated to work with Firefox 4.0. You could contact them and make them aware of the problems you are having with their program.

Does IC WebClient require a J2EE engine for any of its component

Does IC WebClient requires a J2EE engine for any of its component? What's the need to install j2ee engine on CRM server?
I would appreciate if anybody could give a good answer or any kind of documentation on it.

Prakash,
The answer is yes in terms of the J2EE enginge being required. It primarily handles your multichannel access and broadcast messaging for the call center. If you don't install it, then your IC webclient will not work correctly. We are not using the "telphony" features of the call center, but still installed the java piece so that the standard functionality would work correctly.
Good luck,
Stephen

Cannot delegate Reporting Services Web access to domain user / group, User does not have required permissions

Hi
I have an SCCM 2012 SP1 CU3 installation on a Server 2008 R2 + SQL 2008 R2.
I'm having trouble delegating Reporting Services Web Access to a standard domain user.
I have followed the instructions from these blogs:
http://blog.coretech.dk/kea/creating-the-reporting-user-role-in-configmgr-2012/
http://www.wolffhaven45.com/blog/sccm/assigning-users-to-configmgr-reportusers-group-in-sccm-2012/
No matter how I try, I cannot get the reports to show for a standard domain user. In the console no reports are showing and in the web access I get
"User domain\user does not have required permissions........"
The only thing that is consistenly working when I test is to put the AD Group on the Security Role "Full Administrator".
Then everything will show up.
Any ideas on how to troubleshoot this?

Thanks everyone for helping me with tips. I have now solved the problem. It was the permissions from SCCM that did not replicate to the Reporting Server.
In srsrp.log I got these error messages:
Could not retrieve the reporting service name for instance 'MSSQLSERVER'
Invalid class
Could not stop the reporting serviceAfter googling a litte I found these 2 sites with similiar problems:http://social.technet.microsoft.com/Forums/en-US/d4a7f93a-506f-4e3f-b5fc-bd2b087277da/ssrs-permissions-do-not-add?forum=configmanagergeneral
http://www.microtom.net/microsoft-system-center/software-distribution/sccm-2012-reporting-services-do-not-install
So I ran the command for SQL 2008 R2: mofcomp.exe C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof
and BAAM, everything started to work =)
/ALX

Ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been

I installed SSRS on an existing instance. Configured SSRS using report manager, loaded some reports and they work as expected.
The problem is I can not launch(IE)  Report Manager UI due to error in description. I can launch the Report Manager IF I RUN IE AS ADMINISTRATOR. The details of error from SSRS log file listed below.
The main page SSRS page starts to display. The display starts with "Home | my subscriptions |site Settings..." in upper right side, and "SQL Server Reporting Services" in upper left. Then the error displays
User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient     permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed.
Starting IE as administrator starts the Report Manager with out problems.
Does anyone have suggestion, is more information needed? Thanks, Joe
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!f4c!08/07/2014-16:18:21:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:18:21:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetPermissionsAction(/).
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been
granted and Windows User Account Control (UAC) restrictions have been addressed.
   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!2538!08/07/2014-16:19:00:: i INFO: Call to GetSystemPermissionsAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: HTTP status code --> 500
-------Details--------
Microsoft.ReportingServices.UI.FolderPage+InsufficientPermissionsToRoot: User 'SSRS_SERVER\SSRS_user1' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions
have been addressed.   at Microsoft.ReportingServices.UI.FolderPage.Page_Init(Object sender, EventArgs e)   at System.EventHandler.Invoke(Object sender, EventArgs e)   at System.Web.UI.Control.OnInit(EventArgs e)
at System.Web.UI.Page.OnInit
(EventArgs e)   at System.Web.UI.Control.InitRecursive(Control namingContainer)   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
library!ReportServer_0-2!1c98!08/07/2014-16:19:00:: i INFO: Call to GetSystemPropertiesAction().
ui!ReportManager_0-1!219c!08/07/2014-16:19:00:: e ERROR: System.Threading.ThreadAbortException: Thread was being aborted.
   at System.Threading.Thread.AbortInternal()
   at System.Threading.Thread.Abort(Object stateInfo)
   at System.Web.HttpResponse.End()
   at Microsoft.ReportingServices.UI.ReportingPage.ShowErrorPage(String errMsg)
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch()
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Using folder N:\WFSLR_JOE\MSRS11.WFSLR_JOE\Reporting Services\RSTempFiles for temporary files.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Cleaned 0 batch records, 0 policies, 1 sessions, 0 cache entries, 1 snapshots, 4 chunks, 0 running jobs, 0 persisted streams, 4 segments, 4 segment mappings, 0 edit sessions.
library!WindowsService_0!202c!08/07/2014-16:20:52:: i INFO: Call to CleanBatch() ends

Hi Joseph_SQL,
The following operating systems limit the overuse of elevated permissions by removing administrator permissions when accessing applications: Windows Server 2012 R2, Windows 8.1, Windows 8, Windows Server 2012, Windows Server 2008 R2, Windows 7, Windows Server
2008 and Windows Vista.
Because the noted operating systems limit permissions, members of the local Administrators group run most applications as if they are using the Standard User account. To avoid open Report Manager in Internet Explorer always using Run as administrator option,
we can refer to the following configuration steps:
Add Reporting Services URLs to trusted sites.
Report Manager Folder Settings
Report Manager Site Settings
For more details about how to configure the settings, please refer to the following article:
http://msdn.microsoft.com/en-us/library/bb630430(v=sql.110).aspx. After finishing the configuration, we can re-open Report Manager in Internet Explorer without using
Run as administrator.
Hope this helps.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

How does SUM actually works

Hi,
I'm puzzled by how SUM actually works.
I've got a table with the following fields:
SET_OF_BOOKS_ID NOT NULL NUMBER(15)
SUMMARY_CODE_COMBINATION_ID NOT NULL NUMBER(15)
DETAIL_CODE_COMBINATION_ID NOT NULL NUMBER(15)
TEMPLATE_ID NOT NULL NUMBER(15)
LAST_UPDATED_BY NOT NULL NUMBER(15)
LAST_UPDATE_DATE NOT NULL DATE
ORDERING_VALUE NOT NULL VARCHAR2(25)
Using the below, I was able to get the total value of all the ordering value.
select sum(ordering_value) from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
I was happy that I could get the total value but am puzzled as ordering value is of data type VARCHAR2.
Is sum(ordering_value) a VARCHAR2 or a NUMBER then?
I did a simple test, inserting the following record:
insert into gl_account_hierarchies values(1,1024,1,2,3,'11-APR-2002','xyz');
After committing, I double check by using the following statement:
select * from gl_account_hierarchies where last_update_date = '11-APR-2002';
and was able to retrieve the newly inserted record.
But when I did another check with the following statement:
select * from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
I wasn't able to retrieve the newly inserted record.
Why is that so? How does SUM actually works? Is the output of SUM a VARCHAR2 or NUMBERIC value?
thanks in advance!!
Yu S.S

SUM() gives a number.
What you have come across is an implicit data conversion. Basically the SQL parser doesn't reject your query as being syntactically invalid just because you're attempting a mathematical function on a non-numeric column. Instead when you execute your query SQL substitutes this
select sum(to_number(ordering_value)) from gl_account_hierarchies where set_of_books_id = 1 and summary_code_combination_id = 1147;
If you want to check this create a view
create order_value as select sum(ordering_value) sum_val from gl_account_hierarchies ;
and then desc it.
Cheers, APC
SUM(

Does OC4J standalone require license fee in order to use in production env?

Hi,
Does OC4J standalone require license fee in order to use in production environment?
Please advise.
Thank you.

Yes, you have to buy Oracle Application server in order to run it on a production enviroment.

Does Visual composer requires enterprise portal installation?

Hi all,
Does Visual composer requires enterprise portal installation?
or can it be installed standalone and used standalone.
Also does Visual composer reuires BI-JAVA stack,
or can it run on BI-ABAP stack also
Thanks all,
Regards,
Robert

Hi ,
Thx Markus,
one more question...
Is VC a stand alone application/package by itself that does not require EP or does it come with EP.
Thanq.
Regards,
Robert.

Does CC 2014 require a new paid subscription or is it an update to an existing license?

Does CC 2014 require a new paid subscription or is it an update to an existing license?

If you are on a current and valid subscription, then it's simply a "free" update.
Mylenium

10.4.11 won't install after download "disk does not meet requirements"

After successfully upgrading to 10.4.6, I was able to download (after three attempts) the upgrade to 10.4.11. When I went to install it, it said the volume I picked (the one the OS is on and just upgraded to Tiger) did not meet the requirements and had the red exclaimation point on it, as did all the other volumes. There is about 8.5 GB of free space on this volume. The upgrade was from the support website and was for the power PC, not the intel. What could be happening?

Hi BDAqua,
This is the only discussion that repeats the "disk does not meet requirements" message I'm getting. I downloaded the combo and get that message. These are my specs:
Machine Name: Power Mac G5
Machine Model: PowerMac7,2
CPU Type: PowerPC 970 (2.2)
Number Of CPUs: 1
CPU Speed: 1.8 GHz
L2 Cache (per CPU): 512 KB
Memory: 3 GB
Bus Speed: 900 MHz
But I can't seem to find any requirements documentation that explains why my PowerPC won't take this upgrade. It's my son's computer and one of his favorite games just raised its req's to 10.4.6. So I went hunting (software update gave me nothing) and found the combo. Any advice appreciated.

I have a G5 and bought and upgraded to osx 10.5. now i need to upgrade to 10.5.6 or higher, but when i download and try to install, i get message "this volume does not meet requirements for this update".

i am trying to sync an ipad to a power mac g5. i bought and upgraded to osx 10.5 and have tried to download and 10.5.6 or higher, but i keep getting same message: "you cannot install mac os x update on this volume. this volume does not meet requirements for this update". help!

Mac OS X 10.5.8 Combo Update
Java for Mac OS X 10.5 Update 5
To me, in all such updates, goes without saying maybe: backup, repair permissions, repair your drive (Disk Warrior does more reliable and thorough job, and it comes out to pennies if you don't wait until needed). Clone your system so you can restore or use the backup - just in case.
I'd even do a fresh format after your clone is done and do a full OS clean install and update, and then a quick import from Setup Assistant.
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.2 or later recommended
(free download from www.itunes.com/download)
iTunes Store account
Internet access
I'm going to assume there is something with the partitions on the drive, partition table most likely, though I know I've seen others with that error message - doesn't really point to cause, rarely does (make sure latest firmware update etc is sometimes included but again, we know that isn't why).

Can location services get disabled automatically? Or does it always require a user to disable it?

Can location services get disabled automatically? Or does it always require a user to disable it?
I was repeatedly trying to Find my iPhone when it came up with "Location Services Disabled".
Later I was able to find my iPhone again. This has happend severally times lately?
Cold this happen automatically, like a "time out" function?

Can location services get disabled automatically? Or does it always require a user to disable it?
I was repeatedly trying to Find my iPhone when it came up with "Location Services Disabled".
Later I was able to find my iPhone again. This has happend severally times lately?
Cold this happen automatically, like a "time out" function?

I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself. What's going on?

I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself. What's going on?

He meant post it here, of course, Louie! How on Earth would you post it "on Photoshop" ?
Thank you for the belly laugh.

Does hplip actually require foomatic-db?

Similar Messages

Maybe you are looking for