Does iCould use special TCP/IP ports?

Hello,
I routinely use iCloud to share iWork documents between my MacBook Pro and my iOS devices. But somehow, I cannot access these documents from the iWork apps on my office iMac (runs Mountain Lion). Could someone suggest a probable reason? (iCloud-based calendar, notes, reminders sync alright.)
Could this be because iCloud uses non-standard TCP/IP ports, most of which are blocked by my organization’s systems administrator? I could not find anything suggesting that on Apple’s web site.
Thanks,
Girish.

Yep, both of them are blocked. So that’s the answer then. I wish there were iCloud documentation somewhere with this piece of information.

Similar Messages

DOES EIGRP USE AS NUMBER/process number as it's PORT NUMBER between the routers in the same AS/group?

in this posthttps://supportforums.cisco.com/discussion/9805551/eigrp-port-number there is an answer which seems a little weird, the question asks about the EIGRP port number, and someone answers that "The port number is the EIGRP AS."
I goggled all over the net but could not find any single clue about it!! is that really so, I mean DOES EIGRP USE AS NUMBER AS PORT NUMBER?
I know stuff about routing, EIGRP,RTP and so on, please don't state the obvious and just give some link to some document on Cisco, about this subject.
BTW there's a link under the mentioned post but it doesn't load, I don't know, anyway thank you

in this posthttps://supportforums.cisco.com/discussion/9805551/eigrp-port-number there is an answer which seems a little weird, the question asks about the EIGRP port number, and someone answers that "The port number is the EIGRP AS."
I goggled all over the net but could not find any single clue about it!! is that really so, I mean DOES EIGRP USE AS NUMBER AS PORT NUMBER?
I know stuff about routing, EIGRP,RTP and so on, please don't state the obvious and just give some link to some document on Cisco, about this subject.
BTW there's a link under the mentioned post but it doesn't load, I don't know, anyway thank you

CTC TCP/UDP Ports numbers

Does anyone know the TCP/UDP Port numbers that have to be opened up when using NAT, this is what I have:
CTC PC >>>>>>>>>>> ROUTER >>>>>>>>>>>ONS15454
The CTC PC and the ONS are on different IP Networks so I'm the router to translate from one to the other with NAT, configured the ONS15454 to use Socks.
I used to have a document that explained this but I've lost it.
THanks
Chris

Hi Chris.
I see you already have provisioned the node for SOCKS Proxy. If you want to be able to still have IP connectivity (for ping or telnet) to the ENE's, then enable the SOCKS Proxy Only option. The SOCKS Proxy needs to be provisioned on the LAN connected 15454 at the very least. You can also go to the CTC drop down menu: Edit -> Preferences -> Firewall and change the port from being variable to static default. That will further restrict the ports that are used by CTC. This should resolve any intermittent connectivity issues in CTC if it is being caused by a firewall.
www.cisco.com/en/US/docs/optical/15000r9_1/15454/sonet/reference/guide/454a91_nwconnectivity.html#wp42216
"If you launch CTC against a node through a Network Address Translation (NAT) or Port Address Translation (PAT) router and that node does not have proxy enabled, your CTC session starts and initially appears to be fine. However, CTC never receives alarm updates and disconnects and reconnects every two minutes. If the proxy is accidentally disabled, it is still possible to enable the proxy during a reconnect cycle and recover your ability to manage the node, even through a NAT/PAT firewall."
Lastly, to answer your question directly below is a link to the list:
www.cisco.com/en/US/docs/optical/15000r9_1/15454/sonet/reference/guide/454a91_nwconnectivity.html#wp59962
Table 14-6 Ports Used by the TCC2/TCC2P
Thanks,
Will

I want to be able to totally block the FaceTime functionality in my home network. I would like to do this at the router level. Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime? Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open. Good luck!

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port.

Can I use the second TCP / IP port on my cRIO to drive a meter Agilent

I would like to use the second TCP / IP port of my NI cRIO-9024 to control my Agilent 33210A pulse generator with VISA TCP/IP.
My Agilent has only TCP/IP and GPIB ports.
Is it possible?
cordially

All the MACs (from my old 2006 PPC Mini) will auto detect ethernet crossover and straight through and rollover cables correctly. They should be Auto-MDIX.
Having said that, the FW800 (via TB) and Ethernet should be very close in terms of performance.

TCP/UDP Ports and site used by FEP to download updates - needed to allow on perimeter firewall

Can some one point me with information like what TCP/UDP ports are utilized by FEP and what DNS / site Name it uses to download FEP Updates. This is needed to tighten perimeter FireWall policies
Thank you

It should be the same as the documentation for all Software Updates:
https://technet.microsoft.com/en-us/library/bcf8ed65-3bea-4bec-8bc5-22d9e54f5a6d#BKMK_ConfigureFirewalls
Make sure to expand the "restrict access to specific domains" section to see the update related URLs.

I use Pro Logic 9 and see that to upgrade to Pro Logic X I need to buy the full package again. Does apple offer special conditions for their Apple clients ? Are users of apple care protection plan better served ?

I use Pro Logic 9.1.8. and see that to upgrade to Pro Logic X I need to buy the full package again. Does apple offer special conditions for their Apple clients ? Are users of apple care protection plan better served ?

Old saying applies here most of the time......
"If it ain't broken, don't fix it"
I choose to use LP9 with Snow Leopard myself (10.6.8 and 9.1.6) for most of my commercial work simply because I find that combo very stable and provides the best overall performance for my setups here... but I am also using LPX with Mavericks as part of my client support and that works fine too although with a drop in performance due to the heavier demands made on the hardware by the newer OS X and LPX graphic routines for example..

QOS Network Planning - TCP/UDP Ports used in CWMS 2.5 MDC deployment

Does anyone know if there is documentation that describes the WAN traffic in CWMS 2.5 MDC? I'm looking for the TCP/UDP ports that must be prioritized on the WAN to properly class our traffic between the two data centers. I can't find any such document.
Thanks,
Matt

HI Matt,
All the network requirements are listed in the CWMS 2.5 Planning Guide in Networking Checklist: http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_5/Planning_Guide/Planning_Guide/Planning_Guide_chapter_0100.html
I hope this is what you are looking for.
-Dejan

Which port does Safari use for web browsing directly on Mac

In our intranet network, clients both using proxy or directly connect to internet is OK, but when we disable UDP port upwards 10000, Mac users can not connect to internet without seting proxy, and Windows user is no problem on this. How could this be, wich port does safari use when browsing web

Should be using Port 80 (HTTP).
Here's the list:
http://docs.info.apple.com/article.html?artnum=106439
Hope this helps...

What ports does icloud use for mail?

What ports does icloud use for mail?

Read > http://support.apple.com/kb/HT4864 iCloud uses 993 for IMAP and 587 for SMTP

Why does skype use HTTP ports by default?

Hello i was just woundering why the skype application is useing the default HTTP ports (80 and 443) for it's services?

Please see this FAQ.
Which ports need to be open to use Skype for Windows desktop?
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Pam.conf does not use ldap for password length check when changing passwd

I have already posted this in the directory server forum but since it is to do with pam not using ldap I thought there might be some pam experts who check this forum.
I have dsee 6.0 installed on a solaris 10 server (client).
I have a solaris 9 server (server) set up to use ldap authentication.
bash-2.05# cat /var/ldap/ldap_client_file
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_FILE_VERSION= 2.0
NS_LDAP_SERVERS= X, Y
NS_LDAP_SEARCH_BASEDN= dc=A,dc= B,dc= C
NS_LDAP_AUTH= tls:simple
NS_LDAP_SEARCH_REF= FALSE
NS_LDAP_SEARCH_SCOPE= one
NS_LDAP_SEARCH_TIME= 30
NS_LDAP_SERVER_PREF= X.A.B.C, Y.A.B.C
NS_LDAP_CACHETTL= 43200
NS_LDAP_PROFILE= tls_profile
NS_LDAP_CREDENTIAL_LEVEL= proxy
NS_LDAP_SERVICE_SEARCH_DESC= passwd:ou=People,dc=A,dc=B,dc=com?one
NS_LDAP_SERVICE_SEARCH_DESC= group:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_SERVICE_SEARCH_DESC= shadow:ou=People,dc=A,dc=B,dc=C?one
NS_LDAP_BIND_TIME= 10
bash-2.05# cat /var/ldap/ldap_client_cred
# Do not edit this file manually; your changes will be lost.Please use ldapclient (1M) instead.
NS_LDAP_BINDDN= cn=proxyagent,ou=profile,dc=A,dc=B,dc=C
NS_LDAP_BINDPASSWD= {NS1}6ff7353e346f87a7
bash-2.05# cat /etc/nsswitch.conf
# /etc/nsswitch.ldap:
# An example file that could be copied over to /etc/nsswitch.conf; it
# uses LDAP in conjunction with files.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
# the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
passwd: files ldap
group: files ldap
# consult /etc "files" only if ldap is down.
hosts: files dns
ipnodes: files
# Uncomment the following line and comment out the above to resolve
# both IPv4 and IPv6 addresses from the ipnodes databases. Note that
# IPv4 addresses are searched in all of the ipnodes databases before
# searching the hosts databases. Before turning this option on, consult
# the Network Administration Guide for more details on using IPv6.
#ipnodes: ldap [NOTFOUND=return] files
networks: files
protocols: files
rpc: files
ethers: files
netmasks: files
bootparams: files
publickey: files
netgroup: ldap
automount: files ldap
aliases: files ldap
# for efficient getservbyname() avoid ldap
services: files ldap
sendmailvars: files
printers: user files ldap
auth_attr: files ldap
prof_attr: files ldap
project: files ldap
bash-2.05# cat /etc/pam.conf
#ident "@(#)pam.conf 1.20 02/01/23 SMI"
# Copyright 1996-2002 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# PAM configuration
# Unless explicitly defined, all services use the modules
# defined in the "other" section.
# Modules are defined with relative pathnames, i.e., they are
# relative to /usr/lib/security/$ISA. Absolute path names, as
# present in this file in previous releases are still acceptable.
# Authentication management
# login service (explicit because of pam_dial_auth)
login auth requisite pam_authtok_get.so.1 debug
login auth required pam_dhkeys.so.1 debug
login auth required pam_dial_auth.so.1 debug
login auth binding pam_unix_auth.so.1 server_policy debug
login auth required pam_ldap.so.1 use_first_pass debug
# rlogin service (explicit because of pam_rhost_auth)
rlogin auth sufficient pam_rhosts_auth.so.1
rlogin auth requisite pam_authtok_get.so.1
rlogin auth required pam_dhkeys.so.1
rlogin auth binding pam_unix_auth.so.1 server_policy
rlogin auth required pam_ldap.so.1 use_first_pass
# rsh service (explicit because of pam_rhost_auth,
# and pam_unix_auth for meaningful pam_setcred)
rsh auth sufficient pam_rhosts_auth.so.1
rsh auth required pam_unix_auth.so.1
# PPP service (explicit because of pam_dial_auth)
ppp auth requisite pam_authtok_get.so.1
ppp auth required pam_dhkeys.so.1
ppp auth required pam_dial_auth.so.1
ppp auth binding pam_unix_auth.so.1 server_policy
ppp auth required pam_ldap.so.1 use_first_pass
# Default definitions for Authentication management
# Used when service name is not explicitly mentioned for authenctication
other auth requisite pam_authtok_get.so.1 debug
other auth required pam_dhkeys.so.1 debug
other auth binding pam_unix_auth.so.1 server_policy debug
other auth required pam_ldap.so.1 use_first_pass debug
# passwd command (explicit because of a different authentication module)
passwd auth binding pam_passwd_auth.so.1 server_policy debug
passwd auth required pam_ldap.so.1 use_first_pass debug
# cron service (explicit because of non-usage of pam_roles.so.1)
cron account required pam_projects.so.1
cron account required pam_unix_account.so.1
# Default definition for Account management
# Used when service name is not explicitly mentioned for account management
other account requisite pam_roles.so.1 debug
other account required pam_projects.so.1 debug
other account binding pam_unix_account.so.1 server_policy debug
other account required pam_ldap.so.1 no_pass debug
# Default definition for Session management
# Used when service name is not explicitly mentioned for session management
other session required pam_unix_session.so.1
# Default definition for Password management
# Used when service name is not explicitly mentioned for password management
other password required pam_dhkeys.so.1 debug
other password requisite pam_authtok_get.so.1 debug
other password requisite pam_authtok_check.so.1 debug
other password required pam_authtok_store.so.1 server_policy debug
# Support for Kerberos V5 authentication (uncomment to use Kerberos)
#rlogin auth optional pam_krb5.so.1 try_first_pass
#login auth optional pam_krb5.so.1 try_first_pass
#other auth optional pam_krb5.so.1 try_first_pass
#cron account optional pam_krb5.so.1
#other account optional pam_krb5.so.1
#other session optional pam_krb5.so.1
#other password optional pam_krb5.so.1 try_first_pass
I can ssh into client with user VV which does not exist locally but exists in the directory server. This is from /var/adm/messages on the ldap client):
May 17 15:25:07 client sshd[26956]: [ID 634615 auth.debug] pam_authtok_get:pam_sm_authenticate: flags = 0
May 17 15:25:11 client sshd[26956]: [ID 896952 auth.debug] pam_unix_auth: entering pam_sm_authenticate()
May 17 15:25:11 client sshd[26956]: [ID 285619 auth.debug] ldap pam_sm_authenticate(sshd VV), flags = 0
May 17 15:25:11 client sshd[26956]: [ID 509786 auth.debug] roles pam_sm_authenticate, service = sshd user = VV ruser = not set rhost = h.A.B.C
May 17 15:25:11 client sshd[26956]: [ID 579461 auth.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:25:11 client sshd[26956]: [ID 724664 auth.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:25:11 client sshd[26956]: [ID 100510 auth.debug] ldap pam_sm_acct_mgmt(VV), flags = 0
May 17 15:25:11 client sshd[26953]: [ID 800047 auth.info] Accepted keyboard-interactive/pam for VV from 10.115.1.251 port 2703 ssh2
May 17 15:25:11 client sshd[26953]: [ID 914923 auth.debug] pam_dhkeys: no valid mechs found. Trying AUTH_DES.
May 17 15:25:11 client sshd[26953]: [ID 499478 auth.debug] pam_dhkeys: get_and_set_seckey: could not get secret key for keytype 192-0
May 17 15:25:11 client sshd[26953]: [ID 507889 auth.debug] pam_dhkeys: mech key totals:
May 17 15:25:11 client sshd[26953]: [ID 991756 auth.debug] pam_dhkeys: 0 valid mechanism(s)
May 17 15:25:11 client sshd[26953]: [ID 898160 auth.debug] pam_dhkeys: 0 secret key(s) retrieved
May 17 15:25:11 client sshd[26953]: [ID 403608 auth.debug] pam_dhkeys: 0 passwd decrypt successes
May 17 15:25:11 client sshd[26953]: [ID 327308 auth.debug] pam_dhkeys: 0 secret key(s) set
May 17 15:25:11 client sshd[26958]: [ID 965073 auth.debug] pam_dhkeys: cred reinit/refresh ignored
If I try to then change the password with the `passwd` command it does not use the password policy on the directory server but the default defined in /etc/default/passwd
bash-2.05$ passwd
passwd: Changing password for VV
Enter existing login password:
New Password:
passwd: Password too short - must be at least 8 characters.
Please try again
May 17 15:26:17 client passwd[27014]: [ID 285619 user.debug] ldap pam_sm_authenticate(passwd VV), flags = 0
May 17 15:26:17 client passwd[27014]: [ID 509786 user.debug] roles pam_sm_authenticate, service = passwd user = VV ruser = not set rhost = not set
May 17 15:26:17 client passwd[27014]: [ID 579461 user.debug] pam_unix_account: entering pam_sm_acct_mgmt()
May 17 15:26:17 client passwd[27014]: [ID 724664 user.debug] pam_ldap pam_sm_acct_mgmt: illegal option no_pass
May 17 15:26:17 client passwd[27014]: [ID 100510 user.debug] ldap pam_sm_acct_mgmt(VV), flags = 80000000
May 17 15:26:17 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:17 client passwd[27014]: [ID 988707 user.debug] read_authtok: Copied AUTHTOK to OLDAUTHTOK
May 17 15:26:20 client passwd[27014]: [ID 558286 user.debug] pam_authtok_check: pam_sm_chauthok called
May 17 15:26:20 client passwd[27014]: [ID 271931 user.debug] pam_authtok_check: minimum length from /etc/default/passwd: 8
May 17 15:26:20 client passwd[27014]: [ID 985558 user.debug] pam_dhkeys: entered pam_sm_chauthtok()
May 17 15:26:20 client passwd[27014]: [ID 417489 user.debug] pam_dhkeys: OLDRPCPASS already set
I am using the default policy on the directory server which states a minimum password length of 6 characters.
server:root:LDAP_Master:/var/opt/SUNWdsee/dscc6/dcc/ads/ldif#dsconf get-server-prop -h server -p 389|grep ^pwd-
pwd-accept-hashed-pwd-enabled : N/A
pwd-check-enabled : off
pwd-compat-mode : DS6-mode
pwd-expire-no-warning-enabled : on
pwd-expire-warning-delay : 1d
pwd-failure-count-interval : 10m
pwd-grace-login-limit : disabled
pwd-keep-last-auth-time-enabled : off
pwd-lockout-duration : disabled
pwd-lockout-enabled : off
pwd-lockout-repl-priority-enabled : on
pwd-max-age : disabled
pwd-max-failure-count : 3
pwd-max-history-count : disabled
pwd-min-age : disabled
pwd-min-length : 6
pwd-mod-gen-length : 6
pwd-must-change-enabled : off
pwd-root-dn-bypass-enabled : off
pwd-safe-modify-enabled : off
pwd-storage-scheme : CRYPT
pwd-strong-check-dictionary-path : /opt/SUNWdsee/ds6/plugins/words-english-big.txt
pwd-strong-check-enabled : off
pwd-strong-check-require-charset : lower
pwd-strong-check-require-charset : upper
pwd-strong-check-require-charset : digit
pwd-strong-check-require-charset : special
pwd-supported-storage-scheme : CRYPT
pwd-supported-storage-scheme : SHA
pwd-supported-storage-scheme : SSHA
pwd-supported-storage-scheme : NS-MTA-MD5
pwd-supported-storage-scheme : CLEAR
pwd-user-change-enabled : off
Whereas /etc/default/passwd on the ldap client says passwords must be 8 characters. This is seen with the pam_authtok_check: minimum length from /etc/default/passwd: 8
. It is clearly not using the policy from the directory server but checking locally. So I can login ok using the ldap server for authentication but when I try to change the password it does not use the policy from the server which says I only need a minimum lenght of 6 characters.
I have read that pam_ldap is only supported for directory server 5.2. Because I am running ds6 and with password compatability in ds6 mode maybe this is my problem. Does anyone know of any updated pam_ldap modules for solaris 9?
Edited by: ericduggan on Sep 8, 2008 5:30 AM

you can try passwd -r ldap for changing the ldap passwds...

How to interface instruments through TCP/IP port

I want to connect an instrument ( which has RS-232 port ) to a Computer Ethernet port through an Ethernet to RS-232/485 Converter. In past I had successfully made many GUI with Java-2 swing to interface instruments via serial ports (COM-1, COM-2 etc.). This time I am interested to do the same thing but through TCP/IP port programming in Java-2 application.
Please suggest me websites/java tutorial sites where I may get guide line, advice and sample example programmes.
Avijit

a_das wrote:
I want to connect an instrument ( which has RS-232 port ) to a Computer Ethernet port through an Ethernet to RS-232/485 Converter. Ok.
In past I had successfully made many GUI with Java-2 swing to interface instruments via serial ports (COM-1, COM-2 etc.). This time I am interested to do the same thing but through TCP/IP port programming in Java-2 application.So you first need to understand the protocol of what the converter does. Until you understand this then coding in java is pointless.
Then you use sockets. There isn't any magic for that part.
[http://java.sun.com/docs/books/tutorial/networking/index.html]

Does iCould use special TCP/IP ports?

Similar Messages

Maybe you are looking for