Does Labview do a Serial to Ethernt/TCPIP Conversion?

Does Labview do a Serial to Ethernt/TCPIP Conversion? I am already using Serial ports transmisson and I used Labview to do simulations and collected data with it. I don't want to redesign the entire program from scratch just yet.
Is there some time of tool inside of Labview will allow a Serial to Ethernet, or Serial to TCPIP conversion before transmitting or receiving? Thanks
Master Student

I'm not aware of a single utility that does serial to TCP conversion, however if you programmed in VISA there's a chance that you could create a TCP resource and just do all of your communication still through VISA without needing to change your code. In MAX you can right click on Devices and Interfaces and choose to create a VISA TCP Resource. If you have the IP address and the TCP port, you can create a resource that links to your device and from that point, you should be able to access that resource with your program that is written using VISA. However, this depends on your original program using VISA.
Logan S.

Similar Messages

How does LabView choose which core to use in a multi-core system

I have to share my multi-core processor with another application. When this other application runs, it consumes 100% of one of the cores on the system for several seconds. I am worried about this other application blocking part of my control code, resulting in delayed control signals and possible loss of control.
1. When one core is completely occupied, will LabVIEW put all operations into the other core? (I am guessing this is yes)
2. If an operation is occurring on a core that is subsequently 100% subscribed, will LabVIEW move the operation to another core? Does LabVIEW (or XP) prevent the other application from stalling operations already in progress?
The operations I am most concerned with are for the Multifunction DAQ and serial port calls.
I am working on a good sized (>100 vi) control system application in LabVIEW 8.2.1. It is running on Windows XP.

1. Yes, Windows will allocate LabVIEW to an open thread on the unused core.
2. Again, yes, Windows will check for available threads and move LabVIEW to any that are open, it doesn't matter what core that is.
You can also force LabVIEW code, or parts of it, to run on a specific processor using the timed loop structure. You can find help for setting that up here.
Chris Van Horn
Applications Engineer

Adobe photoshop cs2 download on adobe website does not work- the serial number does not work?

photoshop cs2 download on adobe website does not work - the serial number given isn't recognised when you enter it when trying to install. the live chat at adobe cannot help and suggested that I may find the answer here. Can anyone help with this?

Adobe has decommissioned the CS2 activation servers, so your old serial number is no longer usable.
If you download the special non-activating version of CS2 that Adobe has made available to licensed CS2 users, you MUST also use the new serial number provided by Adobe on that download page:
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
That S/N does work. I double checked.

FileUpload problem: InputStream does not contain a serialized object

Hi All,
I'm using the FileUpload component in a JSPDynPage and the htmlb component seems to work fine but I cannot read the file (InputStream). I get the following error(IOException): "InputStream does not contain a serialized object".
Please let me know what is wrong with my code. This is a part of the code I used:
public FileInputStream sourceFileInput;
public ObjectInputStream input;
FileUpload fu;
fu = (FileUpload) this.getComponentByName("myFileUpload");
IFileParam fileParam = ((FileUpload) getComponentByName("myFileUpload")).getFile();
File f       = fileParam.getFile();
file         = fu.getFile().getFile();
absolutepath = fu.getFile().getFile().getAbsolutePath();
this.sourceFileInput = new FileInputStream(file);
input = new ObjectInputStream(sourceFileInput);
The last line of code seems to generate te error.

Hi,
I have found the answers, thank you both.
(I included the examle code. Perhaps of some use to someone.)
FileUpload fu;
fu = null;
fu = (FileUpload) this.getComponentByName("myFileUpload");
//       this is the temporary file
if (fu != null) {
     IFileParam fileParam = ((FileUpload) getComponentByName("myFileUpload")).getFile();
     if (fileParam != null) {
          // get info about this file and create a FileInputStream
          File f = fileParam.getFile();
          if (f != null) {
               try {
                    fis = new FileInputStream(f);
               // process exceptions opening files
               catch (FileNotFoundException ex) {
                    myBean.setMessage(
                         "1" + f + ex.getLocalizedMessage());
               isr = new InputStreamReader(fis);
               br = new BufferedReader(isr);
String textLine = "";
do {
     try {
          textLine = (String) br.readLine();
     } catch (IOException e) {
          myBean.setMessage(
               "1" + e.getLocalizedMessage());
     // Jco append table & put data into the record
     // (I_FILE is the table with txt data that is sent to the RFC)
     I_FILE.appendRow();
     I_FILE.setValue(textLine, "REC");
} while (textLine != null);

StreamCorruptedException: does not contain a serialized object?

Can someone tell me why am I getting this exception:
C:\javapr>java FetchObject
Couldn't retrieve binary data: java.io.StreamCorruptedException: InputStream
does not contain a serialized object
java.io.StreamCorruptedException: InputStream does
not contain a serialized object
at java.io.ObjectInputStream.readStreamHeader
(ObjectInputStream.java:849)
at java.io.ObjectInputStream.<init>
(ObjectInputStream.java:168)
at FetchObject.main(FetchObject.java:23)
import java.sql.*;
import java.util.*;
import java.io.*;
class FetchObject implements Serializable {
    public static void main (String[] args) {
        try {
            String driver = "oracle.jdbc.driver.OracleDriver";
            Class.forName(driver);
            String url = "jdbc:oracle:thin:@mymachine:1521:homedeva";
            Connection conn = DriverManager.getConnection(url,"cnn","cnn");
            FetchObject i = new FetchObject();
                // Select related
                try
                     byte[] recdBlob = i.selectBlob( 1 , conn );
                     ByteArrayInputStream bytes = new ByteArrayInputStream(recdBlob);
                     ObjectInputStream deserialize = new ObjectInputStream( bytes );
          Employee x = (Employee)deserialize.readObject();
                catch( Exception ex )
              System.err.println("Couldn't retrieve binary data: " + ex);
              ex.printStackTrace();
     catch( Exception ex )
          ex.printStackTrace();
    public byte[] selectBlob( int id, Connection conn )
     byte[] returndata = null;
     try
          Statement stmt = conn.createStatement();
          String sql = "SELECT id, rowdata FROM blobs WHERE id = " + id;
          ResultSet rs = stmt.executeQuery(sql);
          if ( rs.next() )
                       try
                           ByteArrayOutputStream baos = new ByteArrayOutputStream(1024);
                           BufferedInputStream bis = new BufferedInputStream( rs.getBinaryStream("rowdata") );
                       byte[] bindata = new byte[4096];
                           int bytesread = 0;
                           if ( !rs.wasNull() )
                                   if ( (bytesread = bis.read(bindata,0,bindata.length)) != -1 )
                                      baos.write(bindata,0,bytesread);
                            returndata = baos.toByteArray();
                         baos.flush();
                            bis.close();
                   catch ( Exception ex )
                        System.err.println("Problem retrieving binary data: " + ex);
                    rs.close();
                     stmt.close();
           catch ( Exception ex )
                System.err.println("Couldn't retrieve binary data: " + ex);
        return returndata;
import java.io.*;
class Employee implements Serializable
     private String lastName;
     private String firstName;
     public Employee(String lastName, String firstName)
          this.lastName = lastName;
          this.firstName = firstName;
}

To clarify I have stored an Employee Object as a Blob in the Oracle database and am attempting to retreive the
Employee Object from this Blob.
Thanks

My ipad was stolen this morning. what steps should i take? I am filing a police report; does Verizon have the serial number of the ipad that I purchased through them? I have total moble protection; how do I file a claim?

My ipad was stolen this morning; can Verizon track the location of the device an assist the police department in recovering the device? I am filing a police report does Verizon have the serial number of the device for me to include in the police report? I have Total Mobile Protection and need instructions for filing a claim. Is here any other steps I should take?

If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
General steps to follow for a Stolen iPad
http://stolen-ipad.com/
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st Len
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

I purchased the multi-user iworks and recently had to replace my white imac's hard drive but didn't pay to fix the CD drive. My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

I purchased the multi-user iworks (yes back when it was new, 2009 or 2010 and recently had to replace my white imac's hard drive (but didn't pay to fix the CD drive). My iworks does not have a serial number on the box and now that my CD drive isn't working how can I reinstall this software?

Buy or borrow an external USB optical drive.
See the confirmation email or covering letter to obtain the serial number. If you have lost it, contact the supplier.

Java.io.StreamCorruptedException: InputStream does not contain a serialized object

          I have an applet which calls a JSP to write data object to the db and then the
          JSP sends back the updated data object. The writing part is ok but the response
          is giving the following error. The data object is in a separate class which implements
          Serialized.
          Here's the code in the applet calling the JSP and the response from the JSP
          URL server = null;
          String urlConnectionString = "http://localhost:7001/isLoginValid.jsp";
          try
          server = new URL(urlConnectionString);
          catch(MalformedURLException e)
          System.out.println("URL exception: " + e );
          // send request
          ObjectInputStream response = null;
          Object result = null;
          try
          URLConnection conn = server.openConnection();
          conn.setDoOutput(true);
          conn.setUseCaches(false);
          conn.setRequestProperty("Content-Type", "application/octet-stream");
          ObjectOutputStream request = new ObjectOutputStream(new
          BufferedOutputStream(conn.getOutputStream()));
          request.writeObject((Object)dvo);
          request.flush();
          request.close();
          // get the result input stream
          response = new ObjectInputStream(new BufferedInputStream
          (conn.getInputStream()));
          // read response back from the server
          result = response.readObject();
          if( result!=null && (result instanceof DataVO))
          dvo = (DataVO)result;
          String vo = dvo.printDataVO();
          System.out.println("*DataVO*\n"+vo);
          else
          System.out.println("not an instanceof DataVO");
          catch(IOException ignored)
          System.out.println("Error in DataVO response");
          ignored.printStackTrace();
          Here's the code in the JSP sending the response back to the applet. The 'dvo'
          object is the object which is serialized and has gets and sets for the diff. data
          elements. When I print the 'dvo' before writing the object to outputStream it
          prints the correct values for the data element.
          // send response
          response.setStatus(HttpServletResponse.SC_OK);
          ObjectOutputStream outputStream = new ObjectOutputStream (new BufferedOutputStream
          (response.getOutputStream()));
          outputStream.writeObject(dvo);
          outputStream.flush();
          ERROR is as follows:
          Error in DataVO response
          java.io.StreamCorruptedException: InputStream does not contain a serialized object
          at java/io/ObjectInputStream.readStreamHeader
          at java/io/ObjectInputStream.<init>
          What am I doing wrong?. Please respond soon. The applet is run on IIS and the
          JSP in on weblogic 6.1. I'm not sure if that makes any difference.


          I have an applet which calls a JSP to write data object to the db and then the
          JSP sends back the updated data object. The writing part is ok but the response
          is giving the following error. The data object is in a separate class which implements
          Serialized.
          Here's the code in the applet calling the JSP and the response from the JSP
          URL server = null;
          String urlConnectionString = "http://localhost:7001/isLoginValid.jsp";
          try
          server = new URL(urlConnectionString);
          catch(MalformedURLException e)
          System.out.println("URL exception: " + e );
          // send request
          ObjectInputStream response = null;
          Object result = null;
          try
          URLConnection conn = server.openConnection();
          conn.setDoOutput(true);
          conn.setUseCaches(false);
          conn.setRequestProperty("Content-Type", "application/octet-stream");
          ObjectOutputStream request = new ObjectOutputStream(new
          BufferedOutputStream(conn.getOutputStream()));
          request.writeObject((Object)dvo);
          request.flush();
          request.close();
          // get the result input stream
          response = new ObjectInputStream(new BufferedInputStream
          (conn.getInputStream()));
          // read response back from the server
          result = response.readObject();
          if( result!=null && (result instanceof DataVO))
          dvo = (DataVO)result;
          String vo = dvo.printDataVO();
          System.out.println("*DataVO*\n"+vo);
          else
          System.out.println("not an instanceof DataVO");
          catch(IOException ignored)
          System.out.println("Error in DataVO response");
          ignored.printStackTrace();
          Here's the code in the JSP sending the response back to the applet. The 'dvo'
          object is the object which is serialized and has gets and sets for the diff. data
          elements. When I print the 'dvo' before writing the object to outputStream it
          prints the correct values for the data element.
          // send response
          response.setStatus(HttpServletResponse.SC_OK);
          ObjectOutputStream outputStream = new ObjectOutputStream (new BufferedOutputStream
          (response.getOutputStream()));
          outputStream.writeObject(dvo);
          outputStream.flush();
          ERROR is as follows:
          Error in DataVO response
          java.io.StreamCorruptedException: InputStream does not contain a serialized object
          at java/io/ObjectInputStream.readStreamHeader
          at java/io/ObjectInputStream.<init>
          What am I doing wrong?. Please respond soon. The applet is run on IIS and the
          JSP in on weblogic 6.1. I'm not sure if that makes any difference.

Lightroom 4 purchased through Apple App store does NOT have a serial number - cannot upgrade to lightroom 6

I am trying to upgrade from Lightroom 4.4 to Lightroom 6 on a Mac running OS X (Lion). I have purchased Lightroom 6 as an upgrade (as I am running Lightroom 4). The Lightroom 6 installer continues to indicate that it cannot find a "qualifying product" and asks for a declaration of the Lightroom product installed and its serial number. I am currently running Lightroom 4 purchased through the Apple App Store in 2013; according to all the information I can glean regarding this product... it does not have a serial number (if it was purchased through the Apple App Store). Does anyone have an idea on how to supply a valid serial number for the Lightroom 6 installer?
iMac running OS X 10.9.5
Adobe Lightroom 4.4 (purchased in 2013 through Apple App Store)
Adobe Lightroom 6 (purchased online as an upgrade from Adobe Lightroom 4.X)
Any help would be appreciated.
Thanks,
Bruce

As I said in the post, a serial number was not necessary to install it; the Apple downloadable version doesn't seem to be serialized. I have not uninstalled Lightroom 4; it is still running, but apparently in its present form it doesn't provide a serial number for the Lightroom 6 upgrade to use.

Hi, trying to reinstall my adobe photoshop and premier on computer the adobe download does not recognise the serial nos that i have that are in my adobe account.thanks,gem

trying to reinstall my adobe photoshop and premier on computer the adobe download does not recognise the serial nos that i have that are in my adobe account.thanks,gem

Here are a couple links that might help
Error "The serial number is not valid for this product" | Creative Suite
Creative Cloud applications ask for serial number
And try using this cleaner
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

Please then use your web Browser address http://www.adobe.com/ and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in using the account that has the subscription the one you used above to Activate Photoshop.

HT1349 help! Apple does not recognize my serial number

I have an imac that I purchased a little less than year ago and today decided to purchase apple protection plan. As I was trying to enter my serial number listed on the bottom of my imac, I was given an error message stating apple does not recognize my serial number. I double and triple checked making sure I entered everything correctly, including going into "about this mac" from the pulldown menu and copying and pasting the serial number that way but STILL it is not recognized... tried to contact customer service but it went dead after being on hold several times so I tried using the email method but can't submit my question because..... you guessed it, my SERIAL number is incorrect and NOT recognized. Anyone have similar issues? help!

Have you contacted the vendor or seller from whom you purchased the computer?

DTW -- UDF does not appear in Serial Number

Hi All,
I am trying to update a UDF in serial number transaction table for GR PO. I have prepared a template where I have added a column at the end with the name of the column as defined in database. when I map these fields in DTW, I dont find this UDF in the list of serial number's columns. when I map the document header (GR PO), I am able to see the UDF of OPDN table but that does not happen for Serial number's mapping. any idea??? I am using 2005 B PL 44.
thanks,
Binita

Hi Peter,
thanks for the reply. I am using the third template viz SerialNumbers.xlt only for updating UDFs in serial number's transaction table (OSRI). and all the default fields appear in the list while mapping which are there in the template. also the UDF column which I have added in the template does appear in the list on the left side (source fields) but it does not appear on the right side (Target fields). so I have nothing to map it against.
any idea?
thanks,
Binita

How does Labview support redundancy?

I have a control system and Labview will act as the means of control/monitoring. However, I want to have a primary and secondary computer with duplicate system setups. How does Labview support this type of redundancy such that if the primary goes down, the secondary will take control seamlessly.

Hi,
LabVIEW has many capabilities that can be combined to create a very robust redundant system. Some of these features include the following:
Archiving databases periodically
Monitoring a process on a remote machine
Executing an application on the backup when the primary has failed
The most straight forward method of implementing the monitoing is to use discrete memory tags to create a heartbeat. When the heartbeat on the Primary machine has stopped, the backup should take over and begin execution.
If you have specific questions about how to implement this, feel free to call support by going to www.ni.com/ask.
Regards,
Mike

Trying to install old PhotoShop Elements 2.0 but site does not recognize the serial number. Help?

I am trying to install an old PhotoShop disk Elements 2.0 but during installation the site does not recognize the serial number I have on my registration form. Help?

Does your serial number show on your account page?
https://www.adobe.com/account.html for serial numbers on your Adobe page... or
Lost serial # http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Does Labview do a Serial to Ethernt/TC​PIP Conversion​?

Similar Messages

Maybe you are looking for

Does Labview do a Serial to Ethernt/TCPIP Conversion?