Does LR 1.3 include Simple Viewer 1.8 ?

When I make a Web Gallery using the Simple Viewer option and preview it in Internet Explorer, the screen shows a message stating that Flash is needed to view this page even though I have Flash 9.0 on my computer. I understand from Airtight that Simple Viewer 1.8 is needed to overcome this problem. So, does my LR 1.3 include Simple Viewer 1.8 or an earlier version?
Thank you.
Bill

Just a guessing game, but it seems the embedded version is effectively older than 1.8...
What happens if you :
- download the simpleviewer 1.8 archive at http://www.airtightinteractive.com/simpleviewer/,
- just update the swfobject.js script in the C:\Program Files\Adobe\Lightroom\shared\webengines\simpleviewer.lrwebengine folder?
Please backup everything before, of course ;o).

Similar Messages

Upgrade Simple Viewer

The "Simple Viewer" website indicates that the viewer will now work with iPhones and other non-Flash enable applications. Yet, when I build a gallery in Bridge using Simple Viewer it does not work without Flash. Is this an upgrade issue? And, does anyone know how to upgrade so that it will work through Bridge?

Well, you are probably correct. It is included with the default installation of Bridge as one of the slide show templates. When you open the output tab in bridge and create a web gallery, there are three "Airtight" options: Airtight Postcard Viewer, Airtight Auto Viewer and Airtight Simple Viewer. "Simple Viewer" is a nice, simple web gallery show that looks good when embedded into a Dreamweaver page.
But, as I said, it only works if Flash is installed. When I went to the Simple Viewer website (via the hot link embedded into the template in Bridge) the description says it works on iPhones and other browsers that do not have Flash installed. So, I was just trying to figure out why it says that, when the version that came with Bridge does not work on sites that don't use Flash.
I'm guessing that Adobe Bridge uses an older version of Airtight Simple Viewer and 1) I am a little surprised that they don't update it since it comes with the default installation of Bridge and 2) since it was installed with Bridge, I'm not sure how to update it even if I download the update file -- I don't know where Adobe Bridge puts the file or what I have to do to update it. The Simple VIewer site allows you to download the product and run it as a separate action, but I did not find any instructions on how to incorporate it into Bridge, so that if replaces/updates the Bridge plug-in.
I was just hoping for some guidance, thinking (apparently incorrectly) that Adobe would offer some support/assistance/guidance for a product they include with their default installation of Bridge.

How can I create a URL for a PWA for MS Project Server 2013 project file that includes the view?

In earlier versions of PWA a URL for a project could include information on the particular view used. This was very handy for emailing people since when they clicked the URL they would see only the particular tasks in that view. In PWA for Project 2013
the URL contains the info for the project file only and does not include the view or filter or anything else.

Hi Scott,
As far as I can see, this is not possible anymore, since the view's list in the PDP (for example schedule PDP) is affecting only the webpart and not the entire webpage, meaning that the URL is not connected anymore to the view and vice-versa.
Indeed this could be annoying..
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Simple Viewer in iWeb

I have already been in communication with the people at Rowan Cottage regarding the instructions. Please check the comment board there for Simple Viewer if you need to get up to date on this issue.
Repeated attempts(following the instructions very closely) have led me to a brick wall at the part where you place the slideshow folder in it's permanent location, ie: iDisk/Sites. You should then be able to go to this slideshow via this address:
homepage.mac.com/yourusername/yourfoldername/index.html
I continually get the ERROR 404 page. Michael has been involved and attempting to resolve this issue but to no avail, so far.
Has anyone else had these problems and if so, solutions?

steaditwo...
A few questions for you...
1. How are you generating the SimpleViewer gallery? iPhotoExport? Photoshop plugin? jAlbum? Picassa? or manually via buildgallery.php?
2. Do you mind providing your actual information? .Mac username and slideshow folder name?
3. Do you have desktop syncing activated for your iDisk in System Preferences? If so, make sure you force a manual sync.
4. Before you copy your slideshow folder to iDisk/Sites/ does double-clicking on the index.html file launch your gallery? After copying to the iDisk/Sites/ folder, can you click on the index.html file there to launch your gallery?
5. Are you sure you are copying the slideshow folder to the iDisk/Sites/ folder....not the iDisk/Web/Sites/ folder???
Let me know, and we'll go from there.

Need Flash Help - configuring AIrtight Simple Viewer Pro

I need some help configuring the Airtight Interactive simple viewer pro, which requires flash. I am a complete beginner with flash, and I am reluctant to undertake the learning curve, though I am very tech saavy.
My ideal would be to locate someone who could do this FOR me, though resources are very limited for this project. Any suggestions of where I might connect with someone interested in doing this?
Alternately, I could undertake it myself, with someone qualified to coach me rather thouroughly through the whole process. That could be offline, or here where others could benefit from the thread. If someone offers this, I will post the precise details of what I need. The project is medium challenging, not extremely complex, but more than very basic.
Many Thanks.

Hi:
When you create the simpleviewer slideshow with iPhoto's plugin there should be a folder created on your HD that contains the items seen in the screenshot below:
The folder was named simpleviewer because that's what I named it during the export from iPhoto. That's the same folder as I refer to as "Slideshow folder". It can be whatever you name it when exporting from iPhoto. Upload that folder to your iDisk/Web/Sites folder as shown below:
In the iFrame code use the following URL to the index.html file inside the simpleviewer folder:
http://web.me.com/YourMMe_AccountName/simplerviewer/index.html
That should do it.

Having difficulties posting my simple viewer in the HTML snippet box

My simple viewer files are in my site folder Home-sites-jmb-sculptural work
do I need to upload this to the web to have the HTML address work
I have gotten other HTML objects to show up... just not my simple viewer
I have to admit that my skills with HTML involve a lot of cut and paste skills
I really don't know HTML tech at all

Yes, you have to upload the SV folder with its file to your iDisk and then add the following code to an HTML snippet:
<IFRAME SRC = "URL to the index.html file that's created inside the slideshow folder on the hosting server" WIDTH="XXX" px HEIGHT="XXX" PX FRAMEBORDER="O" --if "0" no border, otherwise "1" with border MARGINWIDTH ="Opx" MARGINHEIGHT="Opx" SCROLLING="no" --"no" no scrolling bar, "yes" show always, "auto" showed when need > Your browser does not support IFRAME </IFRAME>
This demo page, SimpleViewer and Flash Album Exporter, has an example of such a SV presentation and describes the steps how to set it up.
OT

Include f:view in af:regionDef

Does anybody knows how to include<f:view> in <af:regionDef>
thanks in advance

Hi,
you can't. <f:view> is the JSF document rot and cannot be added to <af:regionDef>
Frank

Does anyone know how i can view PDF files using Galaxy Note 2?

Does anyone know how i can view PDF files using Galaxy Note 2?
This is what i have been doing;
I click on the file i wish to view (via a portal)
this file goes to notification widget (i drag down screen)
notification/message says download complete
i click on notification/message
nows it says complete action using (here i only have 2 icon options 1= DB Text Editor 2 = HTML Viewer)
I have installed Adobe Reader.

Can you confirm if the downloaded file is a pdf file, that is it ends with .pdf?

How to include one view into another view

Hi SDN's,
               Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
                          LIKP-KUNNR -> KNA1-ADRNR
                          KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
    LIKP-ERNAM -> USR21-BNAME.
    USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
    USR21-PERSNUMBER -> ADR6-PERSNUMBER.
   In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.

hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim

How can I create a URL for a PWA for MS Project Server 2010 project file that includes the view?

Hi, this question has been answered for 2013. The answer here suggests that it can be done in 2010.
See:
http://social.technet.microsoft.com/Forums/projectserver/en-US/3affdc4f-36bf-4381-8b75-27c73465efd4/action?threadDisplayName=how-can-i-create-a-url-for-a-pwa-for-ms-project-server-2013-project-file-that-includes-the-view
Who knows how?
Regards
Sander

Hi Sander,
As far as I tested it, it is not possible either with PS2010. The URL only contains the PDP name and the projUID.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Why some times jdeveloper does not show a coreect design view ?

Hi
thank you for reading my post
why jdeveloper does not show a correct design view of jsf pages sometimes?
It does not shows labels and ... , just show tag names like : form , ... ?
here is a picture for this :
1-incorrect page:
http://www.flickr.com/photos/59086726@N00/217556594/
2-correct page :
http://www.flickr.com/photos/59086726@N00/217556595/
I just closed and open the IDE and page designer shows incorrect pages
thanks

Also try this...go to the project properties for the View project. Look at the JSF Libraries and remove the two JSF libraries and then re-add them....this sometimes helps.
Regards
Grant Ronald

While creating a simple VIEW Error comes ORA-00604,ORA-00001

I am using
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Prod
a simple view statement gives an error.
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_COL1) violated
what may be the reason

Hi,
It seems that SHORT_NAME cause problem.
SQL> CREATE OR REPLACE FORCE VIEW V_META_IMAGELIST
2 AS
3 SELECT A.SEQ_NUM, A.SHORT_NAME, A.DESCRIPTION, A.MULTISELECT, A.ENTITY_SEQ_NUM, A.SECTION_TYPE_
SEQ_NUM,
4 B.SHORT_NAME, A.ACTIVE, A.ENTERED_BY,
5 A.ENTRY_DATE, A.IMAGELIST_LEVEL, A.STARTINGSENTENCE, A.SEPARATOR, A.CONJUNCTION, A.ENDINGSENTEN
CE,
6 A.META_IMAGELIST_ELEMENT_SEQ_NUM
7 FROM meta_imagelist A, SECTION_TYPES B
8 WHERE A.SECTION_TYPE_SEQ_NUM = B.SEQ_NUM(+) ;
B.SHORT_NAME, A.ACTIVE, A.ENTERED_BY,
ERROR at line 4:
ORA-00604: error occurred at recursive SQL level 1
ORA-00001: unique constraint (SYS.I_COL1) violated
SQL> ed
Wrote file afiedt.buf
1 CREATE OR REPLACE FORCE VIEW V_META_IMAGELIST
2 AS
3 SELECT A.SEQ_NUM, A.SHORT_NAME, A.DESCRIPTION, A.MULTISELECT, A.ENTITY_SEQ_NUM, A.SECTION_TYPE_
4 B.SHORTNAME, A.ACTIVE, A.ENTERED_BY,
5 A.ENTRY_DATE, A.IMAGELIST_LEVEL, A.STARTINGSENTENCE, A.SEPARATOR, A.CONJUNCTION, A.ENDINGSENTEN
6 A.META_IMAGELIST_ELEMENT_SEQ_NUM
7 FROM meta_imagelist A, SECTION_TYPES B
8* WHERE A.SECTION_TYPE_SEQ_NUM = B.SEQ_NUM(+)
SQL> /
Warning: View created with compilation errors. --this is because I haven't any tables
SQL> show error
No errors.
SQL> Try to rename SHORT_NAME to an other word.
Nicolas.

Does Adobe Photoshop Elements include Adobe Bridge? Or is that a separate purchase?

Does Adobe Photoshop Elements include Adobe Bridge? Or is that a separate purchase?

I don't have a recent version of Photoshop Elements. I have never seen anyone mentioning Bridge with PSE. Brigde is usually installed with Adobe CS Suites of software like the CS 5 Design Suite or CS 5 Production Suite or CS 6 Master Collection.

Does the DAQmx drivers include LVRun-Time Engine?

Does the DAQmx drivers include LVRun-Time Engine?
1. I first installed LVRun-Time Engine 7.1.1 on a new PC.
2. Then i ran the installer once again and selected remove to uninstall the program.
3. Next I installed DAQmx drivers 8.0.1
4. After this I tried to run my compiled labview.exe and it works fine(!)
When I look in control panel - add/remove programs and select National Instruments software and press change, I can see that NI LabVIEW Run-Time Engine 7.1.1 is installed.
Now why would version 7.1.1 be included in DAQmx 8.0.1?
Question1: Was perhaps the LVRTE install refreshed by the DAQmx install?
Question2: Is it not possible to completely remove installed software with the regular uninstall? I am trying to verify the install procedure as it will be on a fresh PC.

The run-time engine is included with DAQmx. If you look at the distribution, there is a Products folder that has it. My guess is that it's included for something like VI Logger or even the test panels in MAX.

Simple viewer help

Hi all, I need your help. I have created my website, and I'm linking it to mobile me galleries. (no problem). But-- instead of mobile me galleries I would like to link to Simple Viewer.
No problem creating the SV galleries in iphoto , but getting them on my site is baffeling.
I have read all the posts, and have had no success. I am a novice and the nominclature is rough
As I said , I created the gallery folder and placed it in the sites folder on my idisk. when I click on the index folder within the gallery appears and the address is file:///Volumes/rgardnerimages/Web/Sites/slideshoe/index.html nothing I do is linking it to a web page. Any help in simple language would be helpful.
My website is http://www.richardgardnerphotography.com/RichardGardner/richard_gardnerhome.html
Thanks in advance
Richard

Its so long since I did this that I to look back and see where my files were uploaded and how they are organized.
Its seems I have the following files uploaded to the main folder on my server:
flash_detect.js
image data.xml
images
PostCard.html
thumbs
viewer.swf
PostCard.html is the index.html file renamed so that it doesn't conflict with the index.html file generated by iWeb.
If you are using MobileMe to publish you can upload these files to the Finder/Go/iDisk/My iDisk/Web/Sites folder and the URL will be..
http://web.me.com/username/PostCard.html
Its probably better to upload them to your website folder. The path is Finder/Go/iDisk/My iDisk/Web/Sites/WebsiteName folder and the URL for the link to it will be ....
http://web.me.com/username/WebsiteName/PostCard.html
These uploads are done by drag and drop. Follow the path from the Finder/Go menu or do Shift - Command - I from any Finder window and then double click the Web then the Sites folders to get to your actual website folder.

Does LR 1.3 include Simple Viewer 1.8 ?

Similar Messages

Maybe you are looking for