Does OIM Provides Orphan Accounts report generation Out of the Box ???

Hi All ,
Does OIM Provides Orphan Accounts report generation Out of the Box ???

Nopes, OIM Doesn't.
Custom Report
Re: How to generate a report on 'Event Received' events for a resource objects
http://download.oracle.com/docs/cd/B32386_01/generic.902/b32137/reporting.htm

Similar Messages

I red that Oracle Data Integrator provides more than 100 KMs out-of-the-box

I red that
Oracle Data Integrator provides more than 100 KMs out-of-the-box.
Is anybody have any idea how I can reach or view it or use it ?

I got it its under <Oraclehome>oracledi>impexp

Webcam and microsphone does not work on my new hp out of the box?

Just bought from Best Buy? HP - 17.3" Pavilion Laptop - 4GB Memory - 320GB Hard Drive - Pewter
When I turn on the webcam it says it is not enabled
when I connect through skyp, it is says mic is not enabled.
I verified them and they are enabled. This is just out of the box system.

Hi hk33,
Did you verify them in Device Manager?
Once you have verified that they are enabled in the Device Manager go to Skype setup.
Setup the HP webcam as the video source for Skype.
Setup your microphone and sound for the notebook and then exit the setup.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Does Apex 3.0 have PDF creation out of the box?

I was hoping that it does....

No.
There's a couple of threads a little ways down that explain it. You either have to have BI Publisher (Yikes!) or, go download another free package and install and configure it.
Chad

Does MBP support UDF/packet reading stuff out of the box?

Hi
Just curious - if I pop in a CD-RW or DVD-RW can I drag and drop files onto it, or do I need to install an app like Nero ?
Thanks in advance.

You can create a special folder in the "Finder" (kind of like the explorer in windows) called a Burn Folder. Then you drag all the files you want onto this folder and burn it to disk. Something like Roxio's Toast software will give you more flexibility but it's not essential.
hope that helps
arum

Dynamic DNS (via DHCP) out of the box?

Greetings!
I was just wondering... Does OS X support Dynamic DNS updates out of the box?
I can't seem to find any confirmation if 10.5 uses bootpd (which I think it does), and if bootpd supports dynamic DNS updates with the named service built into Leopard Server. There don't seem to be any options in Server Admin to enable this... So I'm a little hazy as how to enable dynamic DNS without compiling my own version of ISC-DHCP.
Just for clarification here; what I'm looking for is the ability to update a DNS zone with a PTR/A record(s) of machines that send a hostname as a part of retrieving a IP address from a DDNS-enabled DHCP server. Ie, "mybox" requests IP from DHCP server, DHCP server updates "mydomain.tld" with a record for "mybox", so that "mybox.mydomain.tld" is resolvable afterwards by the machines on this subnet.
Cheers,
-SC

This is a strange topic because implementing Dynamic DNS on Mac OS X Server looks like it should be child's play... so why hasn't Apple done it? Could it simply be that Apple sees no need for it at this time? Mac OS X clients don't need it to sit happy with a Mac OS X Server. Neither do Windows clients using a Mac OS X Server PDC.
Apple has implemented Dynamic DNS client support into the Active Directory Plug-in in Leopard. In this environment, of course, the client's DNS server is most likely to be an Active Directory-integrated DNS server which happily support DDNS. Unfortunately this Dynamic DNS facility is not immediately available to those not using the Active Directory plug-in.

Can I charge my ipod 5th generation right out of the box,without setting up account

Can I charge my ipod 5th generation right out of the box,without setting up the account

Why do you want to do that.
All new iPod came fully charged. (at least more than 80%)

OIM 11gR2 - Out-of-the-box Approval Workflows

Does anyone know of any good resources that describes the out-of-the-box approval/provisioning workflows of 11g R2? I have searched Google back and forth but found nothing. Some of the workflows are obvious by their name (such as default/BeneficiaryManagerApproval!1.0), but others are not so clear regarding their flows.
On that same note, can one of the out-of-the-box approval workflows be configured to route to an approval group instead of single users?
Thanks for your help!

Instead of searching for docs in google i guess reverse-engineering on your own will be the best way to understand the approval workflows. Navigate to OIM_HOME/server/workflows/composites. It will contain all the approval workflow zip files. Unzip the required one which you want to understand and there will be a .jws file in it. Now open that in jdeveloper and open AprrovalProcess.bpel and composite.xml. It will show how the approval routes and what are the business rules written, everything. It is the best way to understand the approval workflows.
In the same way u can make changes to the out-of-the-box approval workflows also. See this OBE tutorial to understand how you can assign the approval to a group
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oim/oim_11g/Request_Workflow_for_Self_Registration/request_workflow_for_self_registration.htm
Also please try the approval workflow given in the developer's guide which covers most of the basics.
http://docs.oracle.com/cd/E27559_01/dev.1112/e27150/request.htm#CIHFBEFB

Does the K8N Neo-FSR support the mobile chip out of the box

just like the titles says
does the K8N Neo-FSR support the mobile clawhammer out of the box.?
if not what bios would i need,. or can anyone confirm what bios is being shipped on these motheboards now.

Jim,
From what I've read, there are updates to the memory controller and the addition of SSE3 support to Venice. It's also reported to have some performance improvement over Winchester and Newcastle. It will use a default 1.4v VCore. Hopefully, It's power comsumption is on the same order as the 90nm Winchester's or less.
If Monarch is shipping the combo with available Bios, you can bet they work. I'm thinking of giving them a call on mine to transfer the 2yr warranty to my youngest daughter (it's a graduation gift) and to discuss the Bios 3.3 vs. 3.3B3 issues. They shipped mine with B3, and I think there may be a reason. The B3 works great with a simple WPCRSET patch of the CAS to RAS Delay. That's why you see those memory settings working on mine.
On the "boxed" vs. OEM, I think buying the combo with warranty and a better heatsink is a much better choice. Use the Venus 7+ in my specs. It's low profile, all copper, and one of the highest rated. Monarch has it in their configurator. It's as quiet as AMD's. Monarch also gives you a 30 day free return with a Fedex prepaid shipping label in the package.
Danno

Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
Thx

It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
B-rock

IPod Touch 1st Generation doesn't work directly out of the box?

I just bought a first generation iPod touch and first things first I plug it into my PC. Nothing happens on the iPod and on iTunes I immediately get a message saying "iTunes has detected an iPod in recovery mode. You must restore it before it is usable with iTunes." So I hit OK and click yes to the message about restoring it to its factory settings, considering that's how it should be anyway since I had literally just taken it out of the box. I finally get a reaction from the iPod, and it's a solid white screen followed by the apple logo, and then for about 5 minutes iTunes says it's "prepaying the iPod for restore..." followed by the error message "The iPod "iPod" could not be restored, an unknown error occured. (1604)" Then the iPod disconnects from iTunes and proceeds to be frozen at the Apple logo screen. I have looked at all the troubleshooting walkthroughs and none of them work because I have never seen a screen on the iPod other than the Apple logo, it seems as though the only way to fix this is if I just take it back and get a replacement

Hello and Welcome to Apple Discussions.
Is the device brand new? - the Second Generation have been around for some time now so I hope you got a good price on it.
Have a read of this article which explains how to deal with the 1604 error:
http://support.apple.com/kb/TS1458
Let us know how you get on.
mrtotes

IPod Nano 7th Generation - Bad out of the box?

I just purchased the iPod Nano 7th generation today and came home to sync it with iTunes. iTunes recognizes the device for a second then I receive a "Disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off." message. I can see the iPod in iTunes for a second then it disappears. As I keep it plugged in it will recognize, disappear, reapear then disappear again.
I purchased an iPod Touch 5th generation today and that is working just fine (as well as synching my other iDevices). Is this nano bad out of the box?

Same thing happened to me. It did download the playlists I wanted, but the next time I plugged it in it acted as though it was being plugged in for the very first time, (regsitration and set up etc.)
But the really bad news is the BATTERY LIFE. maybe get one hour of play time before it drains to zero.
Anyone else have this issue?

HP Pavillion Does NOT work Straight Out of the Box after Purchase

My daughter bought a new HP Pavillion from Office Depot before starting computer classes at the university. The first one would not work at all and after the tech folks tried all that they could and it would not work, the Office Depot staff exchanged it for another one. Straight out of the box, it does not work. It crashes constantly. My daughter has spent HOURS that she needs for assignments on the phone with HP tech support. Here is where she stands with the situation now: She bought the extended warranty, but apparently that does not cover computers that don't work. The HP warranty....does not apparently assure that you get a working computer either, even when it's just days old and won't function. So....after spending from about 1p to nearly 6p today on the phone with HP tech support, she is not assured that it will work.
They are calling back on Friday to see.
So if it is NOT working, are we just out of luck with a piece of junk that does not function except as a word processor? That won't connect to the internet without crashing? We have been given no options or assurances.
( Post edited by Moderator) When you buy a computer, it should work when it's brand new. If you have a warranty, does that mean that HP stands behind their product and refund the consumer's money when it doesn't? The new HP Envy printer did not work, due to a defective ink cartridge enclosed with it. Does any HP product work at all?

@Mariellynne
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
I work for HP

After the in place upgrade from SharePoint server 2007 to 2010, the out of the box approval workflow does not prompt for additional information after check in of a major version.

I think it has to do with the interaction between Word, InfoPath, IIS, and /or SharePoint, but I cannot put my finger on it. Maybe client integration or authentication settings? I have looked at it in wireshark
and have not seen anything glaring.
Steps to reproduce the (working) behavior:
Set up a document library in SharePoint 2010.
Under versioning settings, make the following changes:
Set Require Content Approval for submitted Items to Yes
Select Create Major and Minor (draft) versions
Set require checkout to Yes
Create an out of the box “approval” workflow with the following settings:
Start this workflow to approve publishing a major version of an item.
I then create a new document. Save it. check it in. it is now version 0.1.
I then open it again. check it out. Make a change. Close and save it.
Check it in.
Publish major version:
At this point a screen is presented to me to enter workflow parameters. This screen comes up in Enterprise 2013 and MOSS 2007, but not the migrated version of 2010:
This is what I need help with. It should come up in 2010. To fix it in 2013, I had to change the IIS bindings to only have 1 entry for a port. I did this for 2010 and it did not work.
Any help or ideas is very appreciated. Thanks very much in advance.

Hi Chris,
According to your description, my understanding is that the approval workflow cannot work when the workflow was set to start to approve publishing a major version of an item after upgrading to SharePoint 2010.
I recommend to check the approval workflow in Workflow settings of the corresponding library to see if the Start this workflow to approve publishing a major version of an item is checked.
For test, I recommend to create a new OOB approval workflow and set it to start to approve publishing a major version of an item in the same library to see if the workflow can work.
Thanks
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

Does OIM Provides Orphan Accounts report generation Out of the Box ???

Similar Messages

Maybe you are looking for