Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

does PI need a direct connection to third party or can work with a proxy server based connection to third party?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

Similar Messages

Applet does not work with a proxy server.URgent

Hi,
I have an asp page being hosted from a IIS server.
The asp page has an applet which gets data from a server side component which is hosted as a service on the server side.For connection to the server I am using URLConnection object and trying to connect over a TCP connection.
The problem occurs when I use an proxy in the middle.
I have changed the browser settings to include the proxy.
The following is the error I recieve:
Full :http://172.25.11.63:4590/
<-------------------------------->
OPening input stream
in Run ::::
ERROR: Created data socket but can't open stream on
it.172.25.11.63:4590//
172.25.11.63:4590//
java.io.FileNotFoundException: 172.25.11.63:4590//
     at com/ms/net/wininet/http/HttpInputStream.connect
     at com/ms/net/wininet/http/HttpInputStream.<init>
     at com/ms/net/wininet/http/HttpURLConnection.createInputStream
     at com/ms/net/wininet/WininetURLConnection.getInputStream
     at TalkClientApplet.rendezvous
     at TalkClientApplet.actionPerformed1
     at TalkClientApplet.start
     at com/ms/applet/AppletPanel.securedCall0
     at com/ms/applet/AppletPanel.securedCall
     at com/ms/applet/AppletPanel.processSentEvent
     at com/ms/applet/AppletPanel.run
     at java/lang/Thread.run
...Disconnecting.
Following is my code.
url = new URL("http://" + host +":"+i);
urlconnection = url.openConnection();
urlconnection.setDoOutput(true);
urlconnection.setDoInput(true);
System.out.println("Successfully opened the URL connection at " + "http://" + host + ":" + i );
          System.out.println ("Protocol: " + url.getProtocol());
          System.out.println ("Host :" + url.getHost());
          System.out.println ("Port :" + url.getPort());
          System.out.println ("File :" + url.getFile() );
          System.out.println ("Full :" + url.toExternalForm());
          System.out.println ("<-------------------------------->");
os = new BufferedWriter(new OutputStreamWriter(urlconnection.getOutputStream()));
System.out.println("OPening input stream ");
// is = new DataInputStream(urlconnection.getInputStream());
     System.out.println(urlconnection.getInputStream());
is = new DataInputStream(urlconnection.getInputStream());
The exact place where I get the error is whn i call URLConnection.openInputStream().
Usually this error comes with a malformed URL.But the same code words without a proxy.Also I am not making any changes to my code in both scenarios that is with or without proxy.
Please help.This is urgent and a showstopper

Thanks for your nice solution, but unfortunatelly it does not work with lines longer than 100 chars with Netscape. It works fine with IE and appletviewer too.
Example:
I use this code:
try {
            URL url = new URL(protocol,hostName,portNumber,URLstring);
            InputStream in = url.openStream();
            BufferedInputStream bis = new BufferedInputStream(in);
            StringBuffer input = new StringBuffer(60);
            int c;
            while ((c = bis.read()) != -1){
                System.out.print((char)c);
                input.append((char)c);
            bis.close();
            dataFromServer = input.toString();
        catch(Exception ex) {
            ex.printStackTrace();
        }I use input file test.html with exactly 100 chars ('a')
Netscape Java Console:
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaadataFromServer : aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaI use input file test.html with exactly 101 chars ('a')
Netscape Java Console:
?JL?yyxk?cedataFromServer : ?

I need an oracle appsvr of previous version(which can work with 8.1.7))

where can i download it? thx

Thanks -- I tried Kosta's suggestion (which I had tried before) but still the same error.
I realized that on my development install (the rest of my team has a year+ old install) that I installed weblogic 12c version 12.1.3 (they have weblogic 12c 12.1.1). 12.1.3 requires jdk 1.8, correct? I started eclipse w/ jdk 1.8 & no more error. I added jdk 1.7 (jdk 1.7.0_45) as the default Java compiler in my Eclipse STS (sts 3.6.4; luna 4.4.2).
When I added a weblogic server instance to eclipse, 12.1.3 would not accept the jdk 1 compiler - it needed java 1.8. So ... I specified that.
I haven't tried it yet but -- is it ok to compile the code w/ jdk 1.7.0_45 and deploy it to weblogic 12.1.3 that uses jdk 1.8.0_40?
Thanks,
Bill

Does Pages NEED a network connection?

I have chosen the option in Pages to not use iCloud, but every time I open Pages, the phone appears to be trying to access the network for some operation. Also, typing is slowed to a crawl, as if typing has to depend on network response time. What gives?

Hi,
It basically includes 3 systems, one is our ECC sender system, middle one is PI box and third one is the receiver system. Data is successfully reaching to PI system from our sender system.Now we want to forward this to our third party system from PI box.
I want to know that such sending of data requires direct connection to third party or it can be done by proxy server based connection to third party.If it is possible then what are the steps to do this?
Regards-
Anuj Nogja

Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers

Does airport express stream directly to wireless speakers or does it need to be connected through an audio cable to an amplifier before the speakers?

I got an additional question bout this topic:
is it possible to use both at the same time? in my case cable-connected speakers in the living-room and an Airplay-speaker in the bathroom and/or kitchen?
so I select the Airport Express as Airplay-Output on my iPad and from there it's shared via cable AND wireless? this would solve the problem of being able to only select ONE Airplay-Output on my iPad at the same time...

Once airport is setup, does it need to be connected via ethernet all the time?

Once airport is setup, does it need to be connected to the router with an ethernet cable all the time?

AirPort Setup....the configuration utility in Mountain Lion...will look at the connection and configure the Express accordingly.
If you have an Ethernet cable connected during the setup, then you will need to leave the Ethernet cable connected after the setup.
If you want the Express to connect using wireless only....then you must configure it using wireless only.

What external drives work well with a late 2011 MacBook Pro? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also should I avail myself of something that works with Thunderbolt or Firewire?

What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

Does Mail (3.6) work with MS Exchange Server 2003?

I'm struggling to get Mail to work with an exchange server.
Apparently, from the company's FAQs, we can hook up an iPhone, but alas not Mail.
With the iPhone directions, they talk about a "domain" field, which doesn't show up in Mail.
Any tips or clues would be appreciated.

I'm not entirely sure why this works now, but it does. Yay!
My problem evolved such that I, when I sent out through a different outgoing server, a recipient would see the address of the outgoing address, e.g. if I was using the gmail servers it would look like [email protected], and not the [email protected]
So as a work around I tested sending out messages with my [email protected] address in the Reply To field. That works.
Strangely, a Sent mailbox with for my [email protected] has appeared. Even messages that I've sent out with nothing in the Reply To field indicate that they've come from my [email protected] address.
Keys to making it work:
• Set up the exchange address as an IMAP account (not an exchange account)
• Use the above referenced source forge tool
• Partner with the company's IT people for whatever assistance they can offer
• Use a Reply To field with the exchange, if required

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

try xxx - may work
_may_ work.

Intermittent proxy error "There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server "

Hi all,
From time to time (at least once a day), the following message pops up on the user's screen:
"There is a problem with the proxy server's security certificate. Outlook is unable to connect to the proxy server . Error Code 80000000)."
If we click "OK" it goes away and everything continues to work although sometimes Outlook disconnects. It is quite annoying...
Any ideas?
Thank you in advance

Hi,
For the security alert issue, I'd like to recommend you check the name in the alert windows, and confirm if the name is in your certificate.
Additionally, to narrow down the cause, when the Outlook client cannot connect again, I recommand you firstly check the connectivity by using Test E-mail AutoConfiguration. For more information, you can refe to the following article:
http://social.technet.microsoft.com/Forums/en-US/54bc6b17-9b60-46a4-9dad-584836d15a02/troubleshooting-and-introduction-for-exchange-20072010-autodiscover-details-about-test-email?forum=exchangesvrgeneral
Thanks,
Angela Shi
TechNet Community Support

When i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well

when i finally connected my mac to work network on windows environment everything related to apple including App store, Safari, software updates, iCloud and iTunes do not work using a proxy server and everything else is working very well including chrome browser…i tried everything but no clue...anybody have solution for this..???

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

Love the Adobe products first. OK , I have my instructional coaches creating power point presentation add audio to each slide with the presenter 10 add ins. I need these presentation converted into MP4 like you can do with adobe presenter video creator.

If you import the PPT deck into Captivate it will not bring the audio from Presenter. But you can import it into Captivate after the slide deck has been imported. The audio files aren't necessarily named in a logical fashion in the source files for the presentation, so I would recommend that you publish the presentation locally and then find the 'data' folder in the published output and the audio files will be named in a way that you can infer the slide they are associated with. Not the simplest proceedure but it should be pretty painless.

Does a Speedlite 420EX made in 2001 can work with a new EOS 60D?

HI!
I have a Speedlite 420EX bought in 2001, working perfectly until now with an EOS300.
Last week I bought a new EOS60D and I would like to know if this camera can work with this old flash.
I am concerned about that and need a confirmation that turn it on will not burn the EOS60D.
My best regards,
Fabio.

Fabio
Just to bolster what Skirball said: I am still using the 380-EX that was made for the Elan 2 and Elan 7 FILM cameras, and it works fine with my Rebel, S5-IS, and SX40-HS - and that means ALL speedlite features - including the motorized zoom head. Until I just recently got the 430-EX-II, the 380-EX was the only external flash I had for my Canon cameras, so you should have no problem with your 420-EX.
Regards,
Ted

Does T61p can work with any USB3.0 Express Card?

Does T61p can work with any USB3.0 Express Card?
For example AKA BC398 with chip NEC 700200?
Or any other?

i don't think many people have tested these cards, theortically it should support them, but not at the full speed. Since the ExpressCard slot is 1.0 standard.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Does PI need a direct connection to third party or can work with a proxy server based connection to third party?

Similar Messages

Maybe you are looking for