Does sending as PSD from LR 3.3 to PS CS4 send lens corrections and other edits?

I shoot RAW files with my Canon XTi (400D) and G12. I have a copy of Creative Suite 4 and am using it with Lightroom 3.3, which adds some goodies that ACR for CS 4 doesn't support, like being able to understand the G12's RAW files, plus doing profile-based lens corrections, improved noise reduction, etc.
If I use PSD as the format to send images back and forth among Lightroom and Photoshop, are they in synch in terms of what the image looks like, including the advanced features I just mentioned? Is there any reason to use TIFF instead of PSD?
I'd like to postpone moving to CS 5 until I'm better able to afford it - the question really is whether LR 3.3 can serve as a substitute for ACR 6.3 by writing an equivalent PSD with all the advanced features done for PS by LR instead of ACR.

I have worked with the combination of LR 3.3 and CS4 for a while.
These two are not fully compatible.
CS4 cannot read the ACR (RAW) file of LR 3.3. So when you edit a RAW-file, LR creates a PSD that is then opened in CS4.
In CS5 the RAW image is opened (as RAW) and a PSD / TIFF is created when you save your edits.
Furthermore: Lens corrections are not read by CS4 - or not completely.
I have never found a difference in quality of behaviour between TIFF or PSD, although some sources I've read say that it's better to save in PSD as it is the native format of PS.
WW

Similar Messages

TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design.

When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address. This sometimes leads me to send the email from the wrong outgoing email account. It is frustrating and poor design, especially since I had already checked the From: address.
iPad 4 running iOS 8.1.3

3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
LJ
http://www.facebook.com/The.Cowboy.Party

TS1631 When I ring someone from my iPhone 4 they can't hear me sometimes and other times they can hear me fine. This has only started happening since I updated to iOS 6 it was perfect the day before.

When I ring someone from my iPhone 4 they can't hear me sometimes and other times they can hear me fine. This has only started happening since I updated to iOS 6 it was perfect the day before.

Good news! I believe I have fixed my phone!!
A friend of mine was having the same problem that I was having where you could hear other people but they couldn't hear you.
We fixed the problem by redownloading the 4.2.1 update. 4th post down on this page: http://forums.macrumors.com/showthread.php?t=1052794&page=5 is a list of links to the update files. I downloaded the one for my phone and did a restore (from a backup) after downloading the file and double clicking it so iTunes opens. Since I've done this my phone has been working perfectly again!
It might take you a few tries, it took my friend 3 tries until his worked right and it worked for me on the first try. I'm guessing something was screwing up during the download.

Once again, I have problems sending e-mails from my iPad 2. I have a telus account and I have dealt with their tech people and they have checked all my settings and everything is fine. Apple techs advised to open Gmail acct. and re-route through it? Why?

I am having a difficult time trying to send e-mails from my iPad 2? I have contacted my Telus server tech people and we have double checked all my settings. Everything is properly set! Checked with my Apple people and they say this is a common problem with my server, yet others with the same server don't seem to have a problem. They suggested that I open a Gmail account and infor my mail server(Telus) to route my mail through my Gmail account? Does thei make sense? Are ther any other solutions I might investigate?

Hi prettytoni,
I saw one interesting solution to set a gmail account like as it is a "Microsoft Exchages" account... Maybe you can try to do the similiar with your Telus account? (I'm not sure about the result, but still you can try it))))
here is the link:
http://www.maclife.com/article/howtos/how_set_your_gmail_accounts_push_email

Some photos from one day are showing up on my photo stream, and others from that same day are not. Any idea why this might be?

Took a bunch of photos on vacation one day, and it seems like the first batch from one day are not showing up, but then all of a sudden, the ones from the second half of the day are there. They are not showing up on the photostream on my iPhone on which I took the photos, or on my iPad or in iPhoto on my computer. Any idea why this could be happening? All the other photos I took all week showed up on my Photostream.
Is there anyway to force these photos into the photostream?
Thanks! Any help would be appreciated!

photo stream uploads photos from your photo app when it is connected to wifi and the photo app has been closed correctly. That may be why your seeing photos pop up on different dates
http://support.apple.com/kb/HT4486

RS-485: PC can send/receive data from PCI card, but LabVIEW can only send to card.

I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim

Tim359 ha scritto:
I have a master/slave setup with a 2-wire RS-485 connection via a StarTech PCI2S485 card http://www.startech.com/product/PCI2S485-2-Port-PCI-RS-422-485-Card-with-DB9. A Vista PC running LabVIEW 2010 is acting as the master to 6 slave devices. I am running a driver VI supplied by the company that made the slaves.
I've used a terminal program called Termite to monitor the ports during operation and have concluded that both the PC and the slaves are sending correct data packets (i.e. correct protocol and reasonable data). Termite indicates that the slave's response is being received by the PCI card, but the problem is that LabVIEW simply isn't reading the response from the card. Each time the driver VI is run it returns a "timeout waiting for slave to respond" error.
The VI and slaves I am using are designed for both RS-232 and 485 communication. I've verified the VI to run in 232 mode on a different COM port. I also wrote a simple VI using the VISA functions to test the ports on the PCI card, but I've had the same results. Hardware connections have been looked over carefully, but the fact that the card actually sends a correct message and receives a correct message indicates a different problem.
Any idea why LabVIEW can talk to the PCI card but can't hear it? Is there anything I can do about this, or does LabVIEW generally not like StarTech's PCI2S485 cards?
Thanks,
Tim
RS232 interface consist of 2 indipendent communication crossed lines between 2 devices (9DSub connector: Pin 2-RX Pin 3-TX pin 5-Gnd)
RS485 interfaceis a bus, shared between 2 or more devices. (like ethernet or CAN Bus)
This means that an incorrect use of the bus can lead to a "packet collision" if 2 or more devices try to send a message on the bus at the same time or at least their messages, partially "overlap"
About 10 years ago I have used a PCI 2 RS485 port: I remember that I have to change the status of RTS serial control line to switch between transmit and receive mode.
This can be done using the serial VISA property:
Serial Settings --> Modem Line Settings --> DTR State
or using the VI
<LabVIEW dir>\vi.lib\Instr\_sersup.llb\serial line ctrl.vi   (LV 8.6.1)
The result was that the slave device connected, send me the response after few nanosec. causing the lost of the answer.
because LabVIEW use more than some nanosec. to change RTS property after sending message on the 485 bus calling a VISA Write.
So for me there was 2 possibilities:
- use 2 RS485 port (1 for transmit 1 for receive echo transmit included)
- use this converter
         http://www.advantech.com/products/ADAM-4521/mod_2E78D425-8B08-43F6-81B0-1B924E53E075.aspx
this converter, after sending a message on the bus, electronically switchs back to receive mode without losing a byte.
But the question is :
what does it means
"RS-485 mode supports Auto Transceiver turn around (ATTA)"
of your card?
bye

Sending Calendar Appointment from Macbook to my wife's PC with Outlook 2013 and it sends a whole calendar and not just the one appointment.

I have a Macbook Pro Late 2013, running OS X 10 Yosemite 10.10.1 and my wife has a PC with Windows 7. I use calendar that comes with my Macbook and she uses Outlook 2013 calendar. When I email from Mail on my Macbook an appointment event and my wife opens the email with the appointment, it wants to add a whole new calendar for this one event, why is this? I just want to send her a single appointment not a whole calendar.
I tried to see if Apple Calendar on my Macbook has any options to help with this issue and I can't see anything that will help.
Should I check out the Outlook 2013 on my wife computer to see what options if any that I need to change to help with this problem?

closing in favour of https://support.mozilla.org/en-US/questions/1024353

When I send a message from my Ipad to my iPhone it sends it twice?

I send messages to my iPad to my iPhone it sends it twice, once from the name of my ipad and the second one is from my cell number, is there anyway to stop this from happening? Or for that matter whys it happening?

The settings issue would be on your wife's iPhone, assuming the message is being displayed on her phone.

Why does text I copy from a .pdf to a Word document, not copy correctly words containing the combinations 'tt' or 'ti'?

When I copy text from a .pdf to a Word document, all words containing the combination 'tt' or 'ti' come up as blank boxes,or question marks. How can I correct this?

To comment a bit further, several letter combinations like tt and ti as well as many combinations with f are given as a single character in some languages and apparently you do not have that special character on your system.

When I open 'new' in Yahoo to write a new mail, the page does not show tabs from bold through to indentation. Can only see font and font size tabs

The only tabs on display are '''font''' and '''font size''' - nothing else. Tabs from bold to indentation are not visible.
Moreover the arrows to go '''up''' and '''down''' on emails are 'invisible' too.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

HT4759 I'd bought cloud and I am looking to see how it works and still don't know. So can somebody tell me how it works, and why does money keep disappearing from my account. I didn't used iTunes match, and and copied everything I had in iTunes and am now

1) How do I use Cloud? I mistakingly use itune match and made copy of all I already had in tunes! 2) how do I get rid of all the copys? 3)how do I get the money that keeps disappars from my account?

I got into a similar situation last night trying to enable wireless on my already configured wired my Time Capsule. It was getting the same or very similar 169.xxx IP address for itself.
I found that I had to change ( I suspect it was restore my previous setting ) the Configure IPv4 item under the Internet Tab in manual setup of the Airport Utility.
It appeared a "manually" and I changed it (back?) to "Using DHCP".
That combined with Connection Sharing: Off (Bridge Mode) lets the upstream router that connects directly to my Cable modem be the DHCP server for the entire network.
As everything had worked fine for weeks until I enabled wireless it seems that the Configure Ipv4 parameter was reset either by me mistakenly or by the updating o f the changed settings. Frankly I' quite sure I didn't change it accidentally (famous last words)
Other combinations may aslo work, but this works for me.

I'm having trouble texting from my IPAD. Sometimes it looks like its searching and other times I get a red exclamation point.

I'm having trouble texting from my IPAD 2. Most of the time it looks like its searching or I get a red exclamation point.
I was only able to send 2 texts. Help!

iPads cant send regular texts - only through iMessage meaning that the other device will need to have iMessage too.
If you can't send a text that means the other person does not have iMessage and iMessage is only installed on iOS devices or OSX Lion

Is there a program I can use to retrieve corrupted .MOV files, from a HD memory card where some files will open, and others wont?

Hi,
I have a Mac OS X version 10.6.8 with a 3.06 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.
I have recently shot some still and moving footage on my Cannon EOS 500 D (digital camera) using an AMICOE SD C10 8 GB high speed memory card.
After uploading these photos and movies onto my Mac, I am only able to open about 2/3 of the files that appear on the screen. In the case of the movie files, I can see a number of the file icons, however about 1/3 of them will not open (I get a message saying that Quicktime does not recognise this file - yet it is a .MOV file. Interestingly I can see a small thumbnail for each of these files that will not open, however I am unable to expand the thumbnail into the larger size) and there are a number of photos that simply do not appear as a file or thumbnail.
Is there a program I can use to retrieve these corrupted .MOV and JPEG files from either my computer or the memory card?
Thank you for your interest in this question.
Cheers,
Shaughno.

....to add to the last part... When adding to the iTunes library,- I need iTunes to make a quick-scan to verify that media I am adding isn't already in there,- preventing duplicates that make remedial tasks of removing* duplicates so annoying and unproductive...

How do you choose what account to send an iMessage from?

I have one account set up on iMessage, but it can accept messages sent to my phone number, email address, plus email aliases.
I want to retain this ability to receive messages on several accounts but I also want to force the system to send messages from my phone number, especially when using Share buttons elsewhere in the operating system.
My default account to send messages from IS my phone number, but every time that I send a file from somewhere else in the OS it sends from my email, so I'm not sure what's going on here.
Does anyone know a fix? Thank you

HI,
I understood from the first post but was not in a position to actually test it at the time
I went to my Contacts App > My Card and removed the iPhone number.
It syncs via iCloud to the iPhone.
I went to the iMessages > Preferences > Accounts > iMessages account and changed the bottom drop down to read "Start From" my iPhone Number.
In iPhoto I highlighted a Pic and then chose the Share Menu > Messages and typed in the iPhone Number.
This meant it should have appeared on the iPhone as a Stand alone iMessages "from Itself" effectively.
However it listed another Address Card that did not have the iPhone Number on it. (only the Apple ID in Use)
As you say, the Share option seems to override the Send From option in Messages itself.
One way it can be done is to disable the Apple ID in the Receive At list which then leaves only the iPhone Number.
This will send by the iPhone number.
8:04 pm Thursday; January 23, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Can we send an Asset From BD64?

HI All,
In BD64 I have created a model view for assets using Add BAPI CREATEFROMDATA And saved it. Does any one know from there how to create an Asset IDOC type FIXEDASSET_CREATE01 and send it to a different SAP system.
Please let me know if any one knows. Points will be rewarded.
Regards
Elphick

Hi,
You have created a model view, now you have to define the IDOC structure, with specific basic type. Then you have to develop a program which will create these idocs.
So with the help of ABAPer you can do all these things.
Thanks
Kalyankumar

Does sending as PSD from LR 3.3 to PS CS4 send lens corrections and other edits?

Similar Messages

Maybe you are looking for