Does Transfer EBS to new server with New specifications (Ram,Pross ,..)

Does Transfer EBS with same release to new server with New specifications (Ram,pressoser ,..) need new licences ?

Micel 811 wrote:
Does Transfer EBS with same release to new server with New specifications (Ram,pressoser ,..) need new licences ?\does your license is CPU based?
if its user based then No need
please contact oracle sales as they are the best to answer your question .
http://www.oracle.com/us/corporate/pricing/applications-price-list-070574.pdf
;) AppsMasti ;)
Sharing is Caring

Similar Messages

Restore on new server with new DB_NAME/SID?

My goal is to restore database with the RMAN backup on a server that has no connectivity to the production database (I don’t want to use duplicate command).
I restore a database from RMAN using a same DB_NAME/SID and everything was ok.
-     restore spfile
-     restore controlfile
-     restore database
-     recover database
-     open with reset logs
Now I want to restore database but with different DB_NAME/SID (My production database is PROD and I want to restore this PROD RMAN backup on new server and this new database I want to be called DEV).
How to restore database with new DB_NAME/SID?
Oracle 10g, Windows Server 2003
Thanks in advance!

user9106065 wrote:
My goal is to restore database with the RMAN backup on a server that has no connectivity to the production database (I don’t want to use duplicate command).
I restore a database from RMAN using a same DB_NAME/SID and everything was ok.
-     restore spfile
-     restore controlfile
-     restore database
-     recover database
-     open with reset logs
Now I want to restore database but with different DB_NAME/SID (My production database is PROD and I want to restore this PROD RMAN backup on new server and this new database I want to be called DEV).
How to restore database with new DB_NAME/SID?
Oracle 10g, Windows Server 2003
Thanks in advance!You can use NID command
Run NID and you can see the options to run
or see How to Change the DBID, DBNAME Using NID Utility in version 10GgR2 onwards [ID 863800.1]
Cheers

Moving oracle database to a new server with an upgraded oracle software

Hi Guys,
Here is the scenario, we have an existing Oracle 9.2 demo database on a Solaris 5.9 server. I was asked to transfer this to another server with same OS but with an Oracle 10g software installed. The original plan was to mount the exisiting Oracle home from the original server to the new server and from there copy all the database files and bring up the database.
Here are the steps:
- Issue an "alter database backup controlfile to trace", get the script from the trace file
- Copy all database files to the new server
- Edit parameter files
- Do a startup mount recreate the control files, do a recover database, and startup the database on the new server.
I suggested that we to a transport tablespace but due to limited resources and that the 9.2 database does not have this feature we can't perform this process. I also can't do a exp/imp of the database since we really have limited resources on a disk. I was wondering if the steps I enumerated above are correct? Or would result in an error?

Hi,
why you want to recreate the controlfile, does the mount point locations are changing from old server to new server?
if you recreating controlfile new incarnation starts, keep in mind.
you have the downtime to upgrade.. :)
shutdown
take cold backup and move to new server.
create the directory structure as exist in PFILE including CRD files.
install software
startup upgrade
upgrade database(need to add sysaux TBS)
shut immediate
startup
*@?/rdbms/admin/utlrp.sql*
change hostname in listner.ora/tnsnames.ora files.
Thanks

Moving DP Content to a New Server With Same Name

We are currently in the middle of a server OS refresh from 2k8 to 2k12 R2. Some of the servers are DPs so I need to move the content from one server to another. The big problem is that the new server must have the same name.
I've read this thread http://social.technet.microsoft.com/Forums/en-US/1ffcaa47-9bf8-476d-965e-28350a6bef1b/move-content-from-old-dp-to-new-dp-at-same-remote-site?forum=configmanagerapps which kind of covers my issue but I presume this person was going to
a server with a new name.
Has anyone done this? Is it possible?
Unless there is something clever the only way I see to do this is to uninstall the DP role from the current server, remove the current server from the domain, add the new server with the same name, re-install the DP role and then re-distribute all the content
to the new server. I'd rather not do this as the DP is on a remote site so all the content will be going over the WAN.
I am running SCCM 2012 SP1 CU3.
Any ideas?

Hi,
>>So can I pre-stage from the old server to the new server or does the pre-staging have to be done from the site server?
Yes, you could prestage content from the old server to the new server. Prestaged content files could be created from Configuration Manager Administrator Console.
>>What is the order of the process?
The following blog could help you to prestage content.
http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SBS2008: Move email from Exchange 2007 to new server with Exchange 2013

We have an old server (SBS2008) and plan to buy a new server with (Server 2012). I need to move all the exchange emails, contacts & calendars to the new server. We will no longer use the old server.
Is there a document or migration tool that will help me understand how to move this data form the old exchange server to the new one?
Old Server:
SBS2008 running Exchange 2007
New Server:
Server 2012
Exchange 2013
Any help is appreciated!

Hi Dave,
It can be done, and as Larry suggested you will consider two Server 2012 installs in order to achieve an environment that looks like your current SBS roles; Exchange 2013 on an Active Directory controller isn't a good long-term solution (SBS did this for
you in the past).
For your size operation, a virtual server host, with a Windows Server 2012 license, and two virtual machines would probably be a suitable design model. In this manner, you have Server 2012 license that permits 1 +2 licenses (one host for virtualization,
up to 2 Virtual Machines on same host).
There's no migration tool. That comes with experience and usually trial and error. You earn the skills in this migration path, and for the average SBS support person you should plan on spending 3x (or more) your efforts estimate in hours planning your migration.
You can find a recommended migration path at this link to give you an idea of the steps, but its not exactly point by point going to cover you off for an sbs2008 to server 2012 w/exchange 2013 migration. But the high points are in here. If it looks
like something you would be comfortable with then you should research more.
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Specific around integrating Exchange 2013 into an Exchange 2007 environment, guidance for that can be found here:
http://technet.microsoft.com/en-us/library/jj898582(v=exchg.150).aspx
If that looks like something beyond your comfort level, then you might consider building a new 2012 server with Exchange 2013 environment out as new, manually export your exchange 2007 mailbox contents (to PST) and then import them into the new mail server,
and migrate your workstations out of old domain into new domain. Whether this is more or less work at your workstation count is dependent upon a lot of variables.
If you have more questions about the process, update the thread and we'll try to assist.
Hopefully this info answered your original question.
Cheers,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Migrating Non ASM, Non RMAN to New Server with ASM and RMAN - Possible?

We currently have a database ( Oracle 10g R1 ) on a Sun Solaris server that is NOT using ASM or RMAN. The database is about 300GB. We are getting a new server and we want to install Oracle 10g R2 with ASM and RMAN and migrate the database.
I have seen the documentation on migrating non ASM to an ASM server but the methods all use RMAN. Is it possible to migrate to an ASM database without using RMAN? Would datapump import/export work if I created a new database on the new server with all the same tablespaces? Or, do I have to bite the bullet, install RMAN on the old server and do the backup?
Thanks.

If you're not using RMAN that doesn't mean you can't use it to perform a single backup, rman is contained in every oracle RDBMS installation version 10G or higher.
this is only a sample of how to do it
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '<file_system_path>/%U.DBF';
--first we allocate the channel default channel.
RMAN>RUN
ALLOCATE CHANNEL DEFAULTCHANNEL TYPE DISK;
SHUTDOWN IMMEDIATE;
STARTUP MOUNT;
BACKUP DATABASE;
SHUTDOWN
}then once you have it, you can do what you want.
It should also be possible to manually restore the database from the original datafiles but it's better to follow the solution involving RMAN.
Bye Alessandro

HT1801 Just wondering, does iTunes update my Smart playlist with new songs?

Does iTunes update my Smart playlist with new songs each time I download it or do I have to manually update it myself? If I do, can someone walk me through it. Thanks a bunch

Yes that should work.
Are you using an "Artist is ..." rule? If so, and if new stuff by onerepublic isn't showing up in the list, check the Artist name on the new songs to make sure it's exactly matching the one in your rule.
For example, I've got music in my library (by the same people) under the artist names Godspeed You Black Emperor! and Godspeed You! Black Emperor ... (different position of the "!") If I set up a smart playlist based on:
Artist is Godspeed You Black Emperor!
It doesn't catch the songs with an Artist name of "Godspeed You! Black Emperor".
To get all the songs showing in a smart playlist, I'd need to adjust the Artist name on one or the other sets of songs so it matches a rule. (Haven't done that myself yet for GYBE, because I haven't worked out where the exclamation mark is actually supposed to go.)

Creating new page with new parent tab

Does this happen to anyone else? When I try to create a new page that will have a new parent tab and standard tab in a 2-level tab setup, it never seems to work right. I end up having to dele the new parent tab and standard tab I created while creating the new page. Then once the page is created, I go into Shared Components -> Tabs, and create a new Parent Tab and assign it to this new page. Seems like a crazy way to have to do it.
I know this sounds crazy and it is hard to explain the issue, but anyone who has had this problem with creating a new page with new 2-level tabs will understand what I am talking about.
Can anyone point me to an explanation on how this should be done? I know I must be missing something.
Thanks,
John

I've recently had to muck around with the 2 level tabs aswell. There are some things making this rather difficult indeed.
What i'd do when creating a new page you want to have under a new tab, but also with a new parent tab, is to create it with only a new STANDARD tab. Don't create a new parent tabset. All parent tabs are in the same tabset, and if you create a new tabset you'll effectively see only this new parent tab + tab on the page you created.
So unless you want the page to be on an absolutely new set of tabs, you'll probably just want the page to be on a new top-level tab with under that a new standard tab. Like so:
<NEW PARENT> | parent 1 | parent 3 | parent 4
<NEW TAB> |
To achiece this, you'll need a new standard tab set. You can create this when creating the page. The standard tab set is the set used for you lower level tabs, so obviously we do need a new one.
As for the parent set which you can choose upon page creation, choose the already existing parent tab set. This set contains all your already existing parent tabs, and you wish to add one for display.
When you finish creating the page and run it, you'll see that the standard (lower level) tab is there, and is set to active, but your parent tab is not there.
Go to Shared Components > Tabs. Select the "Manage Tabs" tab there. You can notice your new set there, but notice the striped outline of it. This tab has no parent tab for it! And this is the problem with tab creation in 2-level tabs: you can make a new STANDARD tab and tabset, and define a parent tab set OR create a NEW tab set with tab. Both options fail us: what we want is a NEW parent tab in an existing parent tab set!
So to fix our problem, from the manage tabs tab click on "Manage Parent Tabs", found on the right hand side of the screen in the region "Parent Tab Tasks".
This'll bring you to a magical new tab within the tab components. It's a mystery to me why it has to be hidden like this, and makes it a real pain to use. On this page you can manage your parent tabs (the only place to do so actually...). Here you'll see there is no parent tab for your page (again), but here you can create a new parent tab from the right hand menu "Parent Tab Tasks" > "Create New Parent Tab". Enter a label, and choose your existing parent tab set as parent tab set. Don't create a new set. As for target, refer to your new page again.
However, we are not done yet. You are returned to the "Parent Tab Management" page. You new parent tab will be shown there, but when you run your page, the parent tab will not be set active yet.
To fix that, go back to the "Parent Tab Management". Select your parent tab so you go to it's details. Firstly, give it a new sequence number, otherwise it'll be shared with one (the parent tabs are created with sequence nr 10, so most probably on a shared position with your first parent tab).
Then turn your eyes on the "Current on Standard TabSet" list item. It'll have an option selected, but take a good look: it'll be the same name as your parent tab. From the options, select your new Standard tab set (the lower level set) which holds your new page. Then apply your changes and run your page: both your parent and standard tab will be there and highlighted. Yay!

Move appset to new server and new version

Hi
I am currently on 5.1, SQL 2005 and Windows 2003, where we have some performance issues. To see the effekt of an upgrade I would like to move my current appset to a new server with BPC 7.5 SQL 2008 and Windows 2008.
How should I do this?
Can I make a clean installaion of BPC 7.5 on SQL 2008 and then restore the 5.1 version appset into 7.5.
What is the recommended way to do this.

Hi,
There is nothing to worry.
You need to take the backup from the 5.1 system and restore it in 7.5 MS. After the restoration, please make sure that all the components are working fine or not. You might have to look at the security once again and the reports and the input schedules. There might be small small alterations / modifications required. However, there wont be any big development. There is only one area which needs little more concentration - SSIS packages. You might have to re-build the SSIS packages in SQL 2008. Another thing is that if you have any macros or VB in your templates, you might have to revisit them.
As a whole, I dont see much challenge in this whole process.
Hope this helps.

Bitlbee/Weechat: Opening a new buffer with a specific nick[SOLVED]

I have been using this neat chat application for a while now but I can't seem to find enough information about how to open a new buffer with a specific nick only using a command instead of enabling the mouse to click on said nick to open the new buffer with that nick. I really have looked in as many places as possible and I haven't found any information on which command to use for this specific action. Any information would be appreciated thanks. If there is a script for this particular action please point me to it.
Last edited by rg_arc (2012-06-21 18:25:39)

Isn't /query nick doing what you want?

Cant use purchased items on new computer with new email address

i bought a new laptop then changed isp from aol to bt then backed up my itunes from old laptop to disc ,tried to put music from discs onto new laptop with new email address and my purchased items are on itunes but cant use them as a message appears saying that i cant play music due to computer not being autherised but when i go to autherise computer in itunes the message your computer is autherised appears ......... please help

I have almost the exact same problem. I have a bunch of music, ringtones, TV shows, movies... stuff that I purchased that I can't authorize. All of these items were purchased with the same account I'm still using now. The difference is that I've changed my email address. I don't have the original email address from when I made those purchases and I'm unable to authorize them. I can see that when I view info on one of these purchases the "Account Name: " has my old email address... not my iTunes or Apple account. So, if I'm authorizing my iTunes using my new email none of these older purchases will work.
I'm really curious how to fix this. I've got quite a few purchases from years back that I'd like access to, but I can't authorize using my new email/iTunes or my old email (the one used for the original purchases).
Take a look at the info and tell me if you see "Account Name:" on one of your purchases. And is that associated to your old email address? There has to be a way to fix this or 'transfer' older purchases, especially if it's all under the same real 'account'.

Create/extend materials for new plant with new profit centers

Hi.
We have created a new plant and want to create/extend the materials from an existing plant to the new plant (with new profit center). Can this be done via MM17?
Regards,
Kjettern

Hi Kjettern,
To extend the existing material to a new Plant/Profit centre, pls follow the following steps: -
1. Copy down the material number (i.e XYZ) you want to extend.
2. Go to t-code MM01.
3. Enter the material number (i.e. XYZ) you copied from (1) into the Material field and hit ENTER.
4. You will get an information on the bottom that "the material type XXX and the industry sector YYY has been copied from master record".
5. Pls note that Basic Data 1 & 2 is not changeable as the same set of material data will be used when a material is extended.
6. Hit ENTER again. To change other details other than Basic Data 1 & 2, select the views that you want.
7. You will be prompted to enter a Plant. Here you must enter the new Plant that you want to extend the material to and hit ENTER.
8. You will get a confirmation stating that the material already existed and will be extended (to the desired Plant u entered in (7)).
9. Ensure that all the data in all the important tabs are maintained, for the right Storage Location, Warehouse Num, Moving Average Price, Standard Price etc. before proceed further.
10. Hit Save. You will get a msg that "Material XYZ created".
Now you are able to use this material number in the new Plant you created.
Hope this helps.
Rgds.

Link to new window with a specific size

I want to link to a new window with a specific size in
dreamweaver.
Thanks

check this website, I found it useful....
http://www.accessify.com/tools-and-wizards/accessibility-tools/pop-up-window-generator/

Using new trackpad with new iMac

Using new trackpad with new iMac, but can't seem to get the "touch function" to work. I still have to press firmly and click on the trackpad to get response. The videos show "touch" while I "firm press and click." Checked speed, cleaned it, and reset. No luck?? Ideas? Even took back to Best Buy and seemed to work with their display...

Assuming you are talking about tap to click, you would need to enable it. It is disabled by default. Go to settings and choose trackpad settings. Navigate to "Point and Click" tab and enable "Tap to Click".

Add New Server with Configtool Questions

Hello All,
We are running EP7 SP12 on W2K3 with 16GB RAM and 4 CPUs.
As part of one the Go Live checks done to the system a while back, it was recommended that we increase the number of Server processes to the instance.
So, I followed the information here (http://help.sap.com/saphelp_nw70/helpdata/en/68/dcde416fb3c417e10000000a155106/frameset.htm) to add 3 additional servers to the instance. When I restarted the J2EE engine, it basically sat there in a 'Starting Apps' status. I waited about 2 hours before I stopped the startup process. I went back into Configtool and did a 'Remove Server' on the last, Server3, process and restarted J2EE. This time, everything did start OK, but now I have a few questions I hope someone can answer.
1. Is there a limit to the number of Server processes that can exist in a single instance? If not, what would cause the J2EE servers to essentially hang on startup although they didn't look hung, just extremely slow starting up.
2. I thought when you did the initial 'Add Server' it was supposed to create a duplicate Server process. But, when I check the directory structures of the newly created Server processes, they aren't anywhere close to being the same as the original Server0 process. For example, we have a custom redirect in place when people logon to the Portal, but this wasn't transferred/copied to the new Server1 or Server2. The same was true for other customizations. Also, when looking at the structure, Server0 has approx 80,000 files and 15,000 sub-folders. When looking at the new Server1 & Server2, they are both different in size in both files and folders in respect to each other and compared to Server0. Shouldn't they all be the same?
3. A follow up to question 2. If they aren't the same and they are supposed to be the same, can we just copy the missing files & folders from Server0 to the new Servers?
4. Lastly, since I did a 'Remove Server' in Configtool for Server3, it does not appear in the MMC when the J2EE engine starts. This I expect. But, it did not remove the directory structure for Server3. If I try to manually delete the Server3 directory, it simply says it is in use and won't let me delete the structure. So, is it safe to delete this structure since it isn't being used anymore? If so, I'll stop SAP and delete the structure offline. Do I have to do any database cleanup once I do this? If so, can someone point me to some documentation as to what needs to cleaned up in the DB and how?
Thanks,
Tom

Thanks for the info.
Interesting though. I open a message with SAP and posed these same questions. Their response was similar to yours, but it opened up a whole new set of questions. What follows is the text of that message for others to benefit from (clipped for clarity):
SAP's response to the original set of questions posted here:
=====================
....1.Number of server nodes depends upon the CPU speed.J2EE Engine
can support upto 21 server nodes in a intance.
If number of server nodes is big,it will slow down the startup process.
2.When you create the "New Server"its not the dublicate server.
Its a new server.You can not copy mising files from one server to other
J2EE engine syncronises the server nodes in the instance.
3.Yes.You need to manually delete the file system.Configtool deletes
the server node from the DB....
=====================
To which I replied:
=====================
.....2. I thought when you did the initial 'Add Server' it was supposed to
create a duplicate Server process. But, when I check the directory
structures of the newly created Server processes, they aren't anywhere
close to being the same as the original Server0 process. For example,
we have a custom redirect in place when people logon to the Portal, but
this wasn't transferred/copied to the new Server1 or Server2. The same
was true for other customizations. Also, when looking at the structure,
Server0 has approx 80,000 files and 15,000 sub-folders. When looking at
the new Server1 & Server2, they are both different in size in both
files and folders in respect to each other and compared to Server0.
Shouldn't they all be the same?"
You replied:
"2.When you create the "New Server"its not the dublicate server.
Its a new server.You can not copy mising files from one server to other
J2EE engine syncronises the server nodes in the instance."
But, from actual experience, it does NOT synchronize the nodes, rather
it is a partial synchronization.
So, are the following staements true:
-When a new server process is added, ONLY standard SAP delivered files
& folders are synchronized. True or False?
-No custom files/folders are synnchronized. True or False?
-Custom values, whether part of standard SAP deliverables or custom
deliverables, are NOT synchronized. True or False?
-Each server node needs to be configured independently. True or False?
The reason I'm asking such specific questions is because of what we are
seeing. I'll use the same example from before. We modified the
index.html file for the Portal in Server0. When we added the new
server nodes, this index.html file was not synchronized. Instead, the
default index.html file was created for the new server nodes. That is
an example at the file level. Here is an example from a configuration
perspective. In Server0, in the Visual Admin tool, we have a TREX
server specified in TREX service properties. When the new server nodes
were created, this setting was NOT transferred. Therefore, TREX didn't
work until I specifically went back into VA and added the TREX settings
to the new server nodes. This is a major problem and opens up three
more questions:
1.How do we know what settings were transferred vs. those that weren't
transferred?
2.Also, if you can't copy missing files/folders from one server to
another, then how are we supposed to get those files/folders into the
new server(s)?
3. Is there a way to do a comparison between the server nodes to see
what settings are missing?.....
=====================
SAP's reply:
=====================
.....-When a new server process is added, ONLY standard SAP delivered files
& folders are synchronized. True or False? TRUE
-No custom files/folders are synnchronized. True or False? TRUE
-Custom values, whether part of standard SAP deliverables or custom
deliverables, are NOT synchronized. True or False? TRUE
-Each server node needs to be configured independently. True or False?
YES.
If any new server node is added,J2EE Engine syncronises the information
at the time of next restart......
======================
My Reply:
======================
.....1.How do we know what settings were transferred vs. those that weren't
transferred?
2.Also, if you can't copy missing files/folders from one server to
another, then how are we supposed to get those files/folders into the
new server(s)?
3. Is there a way to do a comparison between the server nodes to see
what settings are missing?.....
======================
SAP's Reply:
======================
.....1.How do we know what settings were transferred vs. those that weren't
transferred?
NO there is no way.
2.Also, if you can't copy missing files/folders from one server to
another, then how are we supposed to get those files/folders into the
new server(s)?
You need to deploy the appliactions again on the new server.
3. Is there a way to do a comparison between the server nodes to see
what settings are missing?
No there is no way......
======================
So, although I really didn't have the answers I was looking for, I confirmed the message. It seems ludicrous to me that there is no way of doing a comparison or manual synch between two server nodes. Also, I can't believe you have to configure each node independently let alone when you do a deployment you now have to deploy to each server individually, of which I haven't found any docs explaining how to do that. So if someone here has a suggestion I'd appreciate it. Although at this point, given the fact the server nodes are so out of synch as to make them almost unusable, we might just delete them all and go back to one node, although I don't want to have to do that.
Thanks,
Tom

Does Transfer EBS to new server with New specifications (Ram,Pross ,..)

Similar Messages

Maybe you are looking for