Does WLS use OracleOCIConnectionPool to create it's pool?

Hello,
I have WLS 8.1 SP2... it ships with oralce jdbc driver version 9.2.0.0 I think...
When WLS creates a connection pool, does it use the OracleOCIConnectionPool class from the oracle jdbc driver? OR does it use the OraclePooledConnection class?
Thanks!
Keith

Keith Kwiatek wrote:
Hello,
I have WLS 8.1 SP2... it ships with oralce jdbc driver version 9.2.0.0 I think...
When WLS creates a connection pool, does it use the OracleOCIConnectionPool
class from the oracle jdbc driver? OR does it use the OraclePooledConnection class?
Thanks!
KeithHi. We use our own pooling implementation. We do not use dirver-internal pooling,
and don't recommend them for use with WebLogic.
Joe

Similar Messages

Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24?Also, if I use a backup created AFTER updating to ios 6 when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the backup?

Is it still possible to downgrade from ios 6 to ios 5.1.1 on my ipod touch 4th gen as of Sept.24? Also, if I use a backup created AFTER updating to ios 6, when I restore/downgrade to ios 5.1.1, does it become ios 6 again because of the version of ios 6 that I created the backup on?

There has never been a legit way to downgrade.
It will always restore to the latest available software.

Does Adobe Reader for iOS have the ability to open inbedded links to additional PDF docs? If not, then what would be the best way to use these already created PDF's?

Does Adobe Reader for iOS have the ability to open inbedded links created with Acrobat Standard to additional PDF docs? If not, then what would be the best way to use these already created PDF's on an I Pad?

driddy61,
As of June 2014, none of the Adobe Reader mobile products support the hyperlink action for opening a separate PDF document.
Adobe Reader for iOS
Adobe Reader for Android
Adobe Reader Touch for Windows 8
In addition, the Reader mobile products do not open multiple windows/documents simultaneously, which would make the navigation between PDF documents nearly impossible. (Once a hyperlink takes you to a different PDF document, you have no way to go back to the original PDF document.)
The only Adobe Reader product that fulfills your department's requirements is Adobe Reader XI (mostly for Windows/Mac desktop/laptop computers). Acrobat Pro and Standard are paid products.
Because you are in search of a less expensive device for your department, you could get a Windows tablet instead of a Windows desktop/laptop computer. Microsoft Surface Pro (that you've mentioned in your previous reply) is just one example. You can also find other less expensive Windows tablets.
Tablets
However, please keep in mind that there are two different types of Windows tablets running two different operating systems.
(a) A Windows tablet with an Intel-based processor running Windows 8.1 Pro
Example: Surface Pro 3
You can install and run traditional desktop apps (e.g. Adobe Reader XI) and new Windows Store apps ("Modern" or "Metro-style" apps).
(b) A Windows tablet with an ARM-based processor running Windows RT 8.1
Example: Surface 2
You can only install and run Windows Store apps (e.g. Adobe Reader Touch) but not traditional desktop apps like Adobe Reader XI.
In general, type (b) tablets are more affordable than type (a) tablets. However, if you want to run Adobe Reader XI, you do need to check the technical specification of each tablet and make sure the following conditions are met.
Processor: Intel
Operating system: Windows 8/8.1 or Windows 8/8.1 Pro, not RT
Hope this helps you choose the right device for your department. Please let us know if you have any questions about system requirements or supported features in the Adobe Reader products.

When I use lightroom to create a slideshow the aspect ratio is wrong when i burn it to DVD. What am i doing wrong?

I use Lightroom to create a slideshow and then export it to software to burn to DVD to play on a TV. When i view it on a computer the pictures are fine, when i view them on the TV the aspect ration is wrong. Can anyone tell me what I'm doing wrong please? Thanks

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD It does not shoe in p[layback on the computer. I understand there isd some file I need to delete and reboot the imovie to co

I use imovie to create videos. When I burn the video to DVD and play it back there is digital breakup in the playback from the DVD. The digital breakup does not show in playback on the computer. I understand there is a file I need to delete and reboot the computer and imovie will rebuild the file in the program. Help!

My method is to use the DAW in standard recording mode, and set up the camcorder entirely separately. After recording, I automate the audio mix with fader moves and effects, then export ("bounce to disk") a full-fidelity AIFF, 16-bit 48 kHz stereo file (most videos use 48, not 44.1). I use iMovie '11 to import the video from the camera, then import the stereo audio file and match it up to the camera audio by dragging it into the iMovie Project. Make the waveforms visible, it's not too hard to align.
Then, use iMovie's "Export as Quicktime" feature. Here, by going through the menus and options, you can control the audio compression (for example, 256k instead of 128, although 128 seems to be enough for YouTube).
AppleMan1958 posted a YouTube video about controlling iMovie's export options that may help:
http://www.youtube.com/watch?feature=player_embedded&v=vJg-909lx2s#!

Create timer function that does not use start-sleep

Hey all I would like to create a timer function that does not use the start-sleep command because this freezes my GUI. I've wrote the start of a function but it seems to move on before the specified time has finished.
Here's what I have:
$Global:timerCounter=0
$Global:timer = new-object System.Windows.Threading.DispatcherTimer
Function Timer{
param(
[parameter(Mandatory=$true)]
[int]$time
$timer.Interval = [TimeSpan]"0:0:$($time)"
$timer.Add_Tick({
$Global:timerCounter++
if($Global:timerCounter -ge 1) {
$Global:timer.Stop()
$timer.Start()
Then in my script i would like to call Timer -time #of seconds. It seems that when I call it the add_tick is registered and then started but it continues on with the rest of my script. Is there a better way of doing this without using start-sleep?
Thanks!

Okay the issue I'm having is that I have code after the $timer.start that I don't wan't to run till a powershell job is done. In all the examples I've seen it has to come to the end of the code then it starts the tick. So in your example it comes to the
end of of your code and showsDialog() then starts ticking.
So:
add-type -AssemblyName system.windows.forms
$form=New-Object System.Windows.Forms.Form
$btn=New-Object System.Windows.Forms.Button
$form.Controls.Add($btn)
$btn.add_Click({$form.Close()})
$btn.Dock='Fill'
$btn.Font='Lucida Console, 20.25pt, style=Bold'
$btn.Text=[DateTime]::Now
$timer=New-Object System.Windows.Forms.Timer
$timer.Interval=1000
$timer.add_Tick({$btn.Text=[DateTime]::Now})
$timer.Start()
$form.ShowDialog()
#I want to do other things here but only after the ps job has finished
Thanks I really am trying to figure this out.
Here is the code I'm working with I guess I'm unclear on how to order the timer and the rest of my code:
if($syncHash.mainCopy){
$syncHash.mainJobDone = $false
$syncHash.writeHost = $false
while(-not $syncHash.mainJobDone){
[System.Windows.Forms.Application]::DoEvents()
if($syncHash.writeHost -eq $false){
Write-OutputBox -Message "Copying"
$syncHash.writeHost = $true
$syncHash.inProgress = $syncHash.mainCopy | Where-Object {$_.State -match 'running'}
$syncHash.currentCopyTime++
}elseif($syncHash.currentCopyTime -ge ($syncHash.averageCopyTime * 2) -and $syncHash.collectionCopyTime.Count -ne 0){
$syncHash.Unusable += $syncHash.currentMainCopyMachine
$syncHash.computersNotForInstall += $syncHash.currentMainCopyMachine
$syncHash.inProgress = $null
$syncHash.mainCopyTimedOut = $True
Write-OutputBox -Type WARNING: -Message "$($syncHash.currentMainCopyMachine) is taking too long. Removing Job.."
Add-Content -Path $log_path -Value "$($syncHash.currentMainCopyMachine) taking to long to copy to"
Stop-Job $syncHash.mainCopy
}else{
$syncHash.inProgress = $syncHash.mainCopy | Where-Object {$_.State -match 'running'}
Write-OutputBox -Message "." -NoNewLine
############################# ############# So I need it to wait right here I have other code other than in this block ############# that needs to run $syncHash.currentCopyTime++
if(-not $syncHash.inProgress){
$syncHash.mainJobDone = $true

How to deploy jar file in WLS using ant script

Hi,
Im trying to deploy a jar file in weblogic 10.3 using ant script and am running into the below error.
+[wldeploy] weblogic.management.DeploymentException: [J2EE:160177]The application at "/u01//RSJBObjects.jar" was not recognized as a valid application type. If this is an EAR file, please ensure the META-INF/application.xml exists. EJB-JARs should have a META-INF/ejb-jar.xml or corresponding annotations exist. If this is an exploded WAR, the name of directory must be end with ".war". RARs require a META-INF/ra.xml. A JMS deployment should be an XML file whose name ends with "-jms.xml". A JDBC deployment should be an XML file whose name ends with "-jdbc.xml". For other application types, please consult the WebLogic Server documentation.+
When i try to deploy the same manually from the console, i get a warning stating that WLS thought this as a library and hence proceeding to deploy as a library. After this warning the deployment continues and completes.
Problem is when i try to deploy using ant, it breaks at this point.
Is there any means that we can deploy a jar to WLS using ant script. This has to be deployed as a library as other apps would be using this jar.
Im unable to create a ear file for this single jar file.
If there is any suggestion on can this be done, please share.
Thanks,
Vijay.

Hi Sunil,
Thanks for the reply, it worked.
Another doubt on the same lines. Now that the jar has been deployed as a library in WLS, when i try to deploy a WAR which refers to this deployed jar library, im unable to. I run into and error stating that the library is inaccessible.
I have to bounce the server and before doing that, i have to manually copy the library.jar from <WLS_domain>/servers/AdminServer/upload/ directory to <WLS_domain>/lib/ directory, once copied i then try to deploy the WAR, then the deployment goes fine.
Is there any means that this deployed library jar be made available soon after deployment and also to avoid copying the file.
Thanks,
Vijay.

Does WLS 8.1 support external ldap in read-only or full read/write?

In previous releases (e.g. 5.1, 6.1), WLS doesn't provide support for update operations such as creating users and groups when configured to use an external LDAP.
Has this changed in 8.1? In other words, does WLS 8.1 provide support for update operations?
Thanks.
Regards,
Alan Dupuis

Hello ,
Like earlier releases, WLS 8.1 too provides read-only access to External LDAP user database.
Kuldeep Singh.

Does WLS 6.1 sp2 allow (bean managed) entity beans to have transaction mode NOTSUPPORTED?

Hi,
I have created two bean managed entity beans, User and Role, abstracting users
and groups in a ldap base. A User may have more than one Role. This is represented
by a (bean managed) 1:many relationship directed from User to Role. For some weird
reasons I get a transaction rollback when reading data, when transactions are
turned on (REQUIRED).
While we where running WLS 6.1 sp1 we had no problems with this as we could set
transaction to NOTSUPPORTED for these two EJBs. Due to other hickups we had to
upgrade to sp2 and suddenly the error reappears leading me to believe that NOTSUPPORTED
isn't allowed anymore by the WLS. I know that NOTSUPPORTED isn't required by the
EJB spec, but containers may support it and obviously WLS used to do just that.
I have not seen any change in the release notes of sp2 that indicates that this
behaviour has changed.
Does anybody know if WLS really doesn't support NOTSUPPORTED for enity beans anymore
in sp2?
If anybody are curiuos or have any good ideas, the stacktrace I get is:
javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
Start server side stack trace:
java.rmi.RemoteException: EJB Exception: ; nested exception is:
     javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
java.util.ConcurrentModificationException
     at java.util.LinkedList$ListItr.checkForComodification(LinkedList.java:535)
     at java.util.LinkedList$ListItr.next(LinkedList.java:476)
     at weblogic.ejb20.manager.DBManager.beforeCompletion(DBManager.java:370)
     at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:481)
     at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:551)
     at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:88)
     at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:980)
     at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1504)
     at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:216)
     at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:190)
     at weblogic.ejb20.internal.BaseEJBLocalObject.postInvoke(BaseEJBLocalObject.java:207)
     at com.takecargo.domainentities.role.RoleBean_1ipw6_ELOImpl.getName(RoleBean_1ipw6_ELOImpl.java:86)
     at com.takecargo.domainentities.role.RoleConverter.getVOforRoleLocal(RoleConverter.java:51)
Any kind of help would be appreciated:)
Regards,
Brynjar Glesnes

WLS support NotSupported on Entity Beans.
It looks like you've hit a bug in the EJB container where an internal Collection class has been modified while the
container is running through an iterator on it.
You should open a case with [email protected]
-- Rob
Brynjar Glesnes wrote:
Hi,
I have created two bean managed entity beans, User and Role, abstracting users
and groups in a ldap base. A User may have more than one Role. This is represented
by a (bean managed) 1:many relationship directed from User to Role. For some weird
reasons I get a transaction rollback when reading data, when transactions are
turned on (REQUIRED).
While we where running WLS 6.1 sp1 we had no problems with this as we could set
transaction to NOTSUPPORTED for these two EJBs. Due to other hickups we had to
upgrade to sp2 and suddenly the error reappears leading me to believe that NOTSUPPORTED
isn't allowed anymore by the WLS. I know that NOTSUPPORTED isn't required by the
EJB spec, but containers may support it and obviously WLS used to do just that.
I have not seen any change in the release notes of sp2 that indicates that this
behaviour has changed.
Does anybody know if WLS really doesn't support NOTSUPPORTED for enity beans anymore
in sp2?
If anybody are curiuos or have any good ideas, the stacktrace I get is:
javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
Start server side stack trace:
java.rmi.RemoteException: EJB Exception: ; nested exception is:
javax.ejb.TransactionRolledbackLocalException: EJB Exception:
- with nested exception:
[javax.ejb.EJBException
- with nested exception:
[weblogic.transaction.RollbackException: Unexpected exception in beforeCompletion:
sync=weblogic.ejb20.internal.TxManager$TxListener@1c2906 - with nested exception:
[java.util.ConcurrentModificationException]]]
java.util.ConcurrentModificationException
at java.util.LinkedList$ListItr.checkForComodification(LinkedList.java:535)
at java.util.LinkedList$ListItr.next(LinkedList.java:476)
at weblogic.ejb20.manager.DBManager.beforeCompletion(DBManager.java:370)
at weblogic.ejb20.internal.TxManager$TxListener.beforeCompletion(TxManager.java:481)
at weblogic.transaction.internal.ServerSCInfo.callBeforeCompletions(ServerSCInfo.java:551)
at weblogic.transaction.internal.ServerSCInfo.startPrePrepareAndChain(ServerSCInfo.java:88)
at weblogic.transaction.internal.ServerTransactionImpl.localPrePrepareAndChain(ServerTransactionImpl.java:980)
at weblogic.transaction.internal.ServerTransactionImpl.globalPrePrepare(ServerTransactionImpl.java:1504)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:216)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:190)
at weblogic.ejb20.internal.BaseEJBLocalObject.postInvoke(BaseEJBLocalObject.java:207)
at com.takecargo.domainentities.role.RoleBean_1ipw6_ELOImpl.getName(RoleBean_1ipw6_ELOImpl.java:86)
at com.takecargo.domainentities.role.RoleConverter.getVOforRoleLocal(RoleConverter.java:51)
Any kind of help would be appreciated:)
Regards,
Brynjar Glesnes

The application does not use the screen and run in the background

Hi
I have downloaded a package of j2me Midlet
from [link] here [link]
and try to reuse the code
but I get the following error when running the code:-
The application does not use the screen and run in the background
I think the error into one of these two classes
package main;
import javax.microedition.midlet.*;
import javax.microedition.midlet.*;
import javax.microedition.lcdui.*;
import javax.microedition.media.Manager;
import javax.microedition.media.MediaException;
import javax.microedition.media.Player;
import java.io.IOException;
import java.io.InputStream;
public class MainMidlet extends MIDlet implements CommandListener {
    private SSGameCanvas gameCanvas ;
    private Command exitCommand ;
    private Player player = null;
    public void startApp() {
try {
       //   create new game thread
          gameCanvas = new SSGameCanvas();
          gameCanvas.start(); // start game thread
          exitCommand = new Command("Exit",Command.EXIT,1);
          gameCanvas.addCommand(exitCommand);
          gameCanvas.setCommandListener(this);
            Display.getDisplay(this).setCurrent(gameCanvas);
   catch (java.io.IOException e)
            e.printStackTrace();
        try {
            // start sounds
            InputStream in = getClass().getResourceAsStream("/resource/startfly.wav");
            player = Manager.createPlayer(in,"audio/x-wav");
            player.setLoopCount(1);
            player.start();
        catch (MediaException ex)
            ex.printStackTrace();
         catch (IOException ex)
            ex.printStackTrace();
    public void pauseApp() {
    public void destroyApp(boolean unconditional) {
        if (player != null) {
            player.close();
        System.gc();
public void commandAction(Command command, Displayable displayable) {
       if (command == exitCommand)
             destroyApp(true);
             notifyDestroyed();
package main;
import java.io.IOException;
import javax.microedition.lcdui.*;
import javax.microedition.lcdui.game.*;
public class SSGameCanvas extends GameCanvas implements Runnable {
    protected GameManager gameManager;
    protected boolean running;
    private int tick=0;
    private static int WIDTH;
    private static int HEIGHT;
    private int mDelay = 20;
    Form mainForm;
    Display display;
    //private int MaxTime;
    public SSGameCanvas() throws IOException{
        super(true);
        gameManager = new GameManager(5,5,getHeight()-10,getWidth()-10,this);
    public void start() {
            this.running = true;
            Thread t = new Thread(this);
            t.start();
    public void stop() {
        running = false;
    public void render(Graphics g) {
        WIDTH = getWidth();
        HEIGHT = getHeight();
        // Clear the Canvas.
        g.setColor(0, 0, 50);
        g.fillRect(0,0,WIDTH-1,HEIGHT-1);
        // draw border
        g.setColor(200,0,0);
        g.drawRect(0,0,WIDTH-1,HEIGHT-1);
        // draw game canvas
        gameManager.paint(g);
    public void run() {
        while (running) {
            // draw graphics
            render(getGraphics());
            // advance to next graphics
            advance(tick++);
            // display
            flushGraphics();
            try { Thread.sleep(mDelay); }
            catch (InterruptedException ie) {}
    public void advance(int ticks) {
        // advance to next game canvas
        gameManager.advance(ticks);
        this.paint(getGraphics());
}Edited by: VANPERSIE on Jul 10, 2012 12:26 PM

Hi Andi,
Thanks for your reply.
Yes, I have waited for a while and the result doesn't change.
The Porblem here is the application is seen started in visual administrator.Only restart brings up the page back.
Can you please suggest anything.
Thanks and regards
Nagaraj

What is the advantage of using IB to create XIBs/Class Objects over coding?

Hi all,
I hoping someone can provide me some pros and cons as to when I should use IB to create XIBs and/or class objects as opposed to directly coding them.
For example, if I choose Apple's Template for creating a Navigation Based Application (cocoa touch), the project creates two NIB files - MainMenu and RootViewController.
However looking at one of demo apps SimpleDrillDown, it does not have a RootViewController XIB and instead creates it via code.
Another example from the same two apps is that the template generates a "Navigation Controller" class object in the Mainmenu.xib. SimpleDrillDown does not bother with this in the XIB, but uses code to generate the controller:
- (void)applicationDidFinishLaunching:(UIApplication *)application {
// Create the navigation and view controllers
RootViewController *rootViewController = [[RootViewController alloc] init];
UINavigationController *aNavigationController = [[UINavigationController alloc] initWithRootViewController:rootViewController];
self.navigationController = aNavigationController;
[aNavigationController release];
[rootViewController release];
// Configure and show the window
[window addSubview:[navigationController view]];
[window makeKeyAndVisible];
as opposed to the template which only needs this:
- (void)applicationDidFinishLaunching:(UIApplication *)application {
// Configure and show the window
// Navigation Controller is defined in MainWindow.xib
[window addSubview:[navigationController view]];
[window makeKeyAndVisible];
So what are the advantages of each approach. Why does apple suggest one approach and yet all its demos use another.
Any thoughts, answers gratefully received.
TIA, Michael.

You can do whatever you're comfortable with, but most of the best Cocoa programmers--the ones on the Mac, I mean--recommend putting everything you can into Interface Builder.
It's a little like the difference between writing a program to do a bunch of financial calculations and using a spreadsheet. Yeah, the program can do everything the spreadsheet can--and more besides--but you'll find it far easier to create, use and modify the spreadsheet.
Interface Builder takes away a lot of completely meaningless choices ("What order should I create the objects in? How should I name the variables? How should I create their frames? What order should I set the attributes in?"), leaving you with an interface optimized for creating and arranging objects, and allowing your code to focus on what you really do need to think about--your application's logic.
(By the way--part of the reason Apple's demos don't all use Interface Builder is that the very first SDK releases didn't have it. Back then, you had to create all your views programatically. Believe me, I have no wish to go back to setting autoresize masks manually. Now get off my lawn, whippersnapper.)

UCCX 8 - Dramatic change in the Create File Document step that is used by the Create XML Document step in order to read an XML file

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
For the last 5 years (and in IPCC3.x/4.x,UCCX/5.x/7.x) I've used the same basic subflow to read a XML document that contains holiday dates where the queue should be closed. I've re-used this script on 20+ client installs and it's always worked. The structure of the script allows you to pass the path and filename of the XML document as parameters to the subflow. (The document is in the repository)
I loaded this script in UCCX 8.0.2 recently and it crashed with a Java.IO error. It looked like it was trying to read the file system directly and not the repository. (In the Linux appliance model this kind of makes sense but why is the step trying to read the file system directly?)
So I open a TAC case (SR# 615243125) and TAC tells me that the method of using the Create File Document step is not supported anymore and that I should specify the filename directly in the Create XML Document step
The problem that I see (aside from having to edit all my scripts that use XML files) is that the Create XML Document step is looking for the input to be a type DOCUMENT and not a type STRING. This seems to imply that I have to hardcode the document in each script that I deploy for a customer. When it was a string it was easy to construct the full file path from parameters and pass to the subflow.
Questions to the group
#1 Am I missing something here?
#2 Do you assume that you'll be able to load a script that worked fine in UCCX 7 into UCCX 8 and that it should completely function when you're doing everything according to the step reference documentation.
#3 Cisco didn’t document this in any way that I can find.
#4 How can you use the Create XML Document step in a fashion that would let you construct the path of the file and the filename previously in the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
(Background)
Create File Document Step
The input filename is a STRING, could be an explicit path and filename in the repository or a variable that represents that path and string
The output of this step is a DOCUMENT to be used in the Create XML Document step
The string FILE_FullPathHolidayFiles references en_us\folderName\documentName.xml
The document was properly uploaded into the repository only, NOT trying to directly read c:\foo\blah…
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The create XML document input can only be a type DOCUMENT

#1 Am I missing something here?
You are mixing two different issues together here.
The Create File Document step is indeed not needed or supported for creating an XML document. That is why there is a unique step; to trigger XML parsing within the MIVR subsystem.
Accessing the file system is restricted to a single folder within the VOS model (i.e. 8.0+). This folder is not backed up, replicated, or cleaned up automatically. It was intended to give developers some FS access as a temporary swap location only.
#2 Do you assume that you'll be able to load a script that
worked fine in UCCX 7 into UCCX 8 and that it should completely
function when you're doing everything according to the step reference
documentation.
Assume nothing; read the documentation and attend one of the dozens of partner training sessions that CCBU put on advising of the upcoming changes.
#3 Cisco didn’t document this in any way that I can find.
You're right, I guess, on the Create File vs. XML Document step. AFAIK Cisco never wrote a notice into the Step Reference Guide explicitly stating that you cannot use the Create File Document although the documentation seemed pretty clear to me without it. File system restrictions are documented in the 8.0 release notes.
Scripting and Development Series: Volume 2, Editor Step ReferenceUse the Create XML Document step to create a logical document that maps a document to another document variable (where the document has already been pre-parsed as an XML document and is ready to be accessed by the Get XML Document Data step).Use this step before the Get XML Document Data step to obtain data from a document formatted using the Extensible Markup Language (XML).
#4 How can you use the Create XML Document step in a fashion that would
let you construct the path of the file and the filename previously in
the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
No it hasn't; just concatinate a string to build the Source Document parameter the step needs. Example: "DOC[" + myFilePath + "]"

Using Jsp to create a crystal report

Hi,
I am using Jsp to create a crystal report from an oracle database.To create a new report document,i am using the ReportClientDocument class in the
"com.crystaldecisions.sdk.occa.report.application.ReportClientDocument " package.
I am using this code:
 ReportClientDocument rpt=new ReportClientDocument ();
 rpt.newDocument();The report application server running on my machine does not support this.
I have to use an IReportAppFactory interface method which is part of the package com.crystaldecisions.sdk.occa.managedreports.*,, in order to create a new report document.Can anbody help be know how to use this interface in a Jsp??
Any help would be appreciated.
Thanks,

Hi Tim, For security reasons we do not save the database password with the report. There are a few ways to solve what you are trying to do:<ol><li>Use the Create Viewer JSP page wizard to auto-generate the code. You will need to use the API option and select the option to "Log on to existing data connections" as well as the option to "Connect the CrystalReportPageViewer" (Note: I suspect that the reason you had a blank page the first time you tried this is because you did not have an Output option selected) The code that is generated will provide you with the ability to pass in the database authentication and then launch the report in the viewer. </li><li>The other option is to use a JNDI Connection at runtime. If you setup a JNDI Data Source you should have the ability to store the database authentication with the Data Source. To have the report use a JNDI connection at runtime you will need to set the name of the JNDI Data Source using the Properties View of the database in the Report Designer.</li></ol>Anyway, give this a shot and let me know how you make out.Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Using RoboHelp to create online tutorials?

Our company currently uses RoboHelp to create our Help
Systems. As a training developer, who has used a course authoring
software package for the past five years, I was wondering if
RoboHelp would be a good environment to develop training tutorials.
I love the fact that you can search and index the help systems and
thought the potential may be there to search for information within
tutorials as well.
I know Captivate is the software simulation product, however
a lot of our training material is either mainly text, or numerous
screen shots showing an individual how to use an application.
As I am new to RoboHelp, does anyone have any advice?
Thanks in advance.

Like Colum, welcome to the Forums!
(The following assumes the WebHelp Pro scenario you outlined)
>>>1. How do I set the window to have the right
frame display initially, without the left index frame? I want to
leave the index frame so that the user can access it if neccesary.
1. Make sure WebHelp Pro is your primary layout.
2. Create a new Window, call it OnePane and select the
tickbox in Window properties for One Pane and click OK. (This means
the Navigation pane (Contents, Index, Search, etc.) are hidden when
first launched.
3. Bring up the WebHelp Pro single source layout wizard.
4. Tick the box: Show navigation pane link in topics (this is
what allows the user to opt to see the Index and navigation pane if
they want.
5. Be sure to select "OnePane" as your default window you
just created and complete the wizard to publish.
6. Caveat: There is a shortcoming when you view locally from
the authoring machine. You will not be able to see the effects of
your changes. These can only viewed in a web browser pointed to
your actual WebHelp Pro site.
7. Publish to the RoboEngine server to view all the changes
you made and notice the "Show" link that allows the user to reveal
the navigation pane.
>>>2. Our Help System is in HTML, but I am thinking
of using WebHelp Pro (from a dedicated server). When I View Primary
Layout, the index frame and button at the top of the form do not
display. I get the yellow box located just below the Internet
Explorer toolbar saying 'To help protect your security, Internet
Explorer has resticted this file from showing active content that
could access your computer. Click here to for options....'. That
could be a real pain for 1200 users. Is there a way to if off for
RoboHelp WebHelp Pro?
I believe you may be encountering something that is only seen
by you because you're viewing it locally. When published, the user
would not see this. To remove this annoying message, go to Internet
Options > Advanced > scroll down to Security and tick the box
"Allow active content to run on My Computer." (Also, for more info,
do a search in the forums for "Mark of the Web")
>>>3. Can I create my own skin?
Sure. Use the WebHelp skin editor as you normally would. Give
the skin a name and use it when you publish.
Hope this helps.
John

Migrating ADF Security to WLS using OID

I have seen a number of posts on this forum regarding deploying an application which has ADF Security enabled to a stand-alone WebLogic server, but none of them seem to address the following.
I have an application in JDeveloper which uses an XML-based identity store and policy store. I have a stand-alone WLS which is connected to OID. I am trying to migrate the credential store and policy store to the OID configured for my stand-alone WLS. The various blogs and OTN articles mentioned frequently in this forum regarding ADF Security address configuring OID in WLS, as well as how to migrate security to XML-based providers on WLS. However, I have not seen any information on how to migrate security to OID in WLS. I have a few questions in particular:
1) JDeveloper online help has limited information for modifying the jps-config.xml to have a destination context, service instance, and service provider for LDAP (OID). It has configuration parameters for “JpsFarmName” and “JpsRootNodeName”. What are these used for, and what should the values be?
2) Does the jps-config.xml file need to be modified in WLS (i.e. <Domain>/config/oracle/jps-config.xml)? Is this file even used at runtime by WLS?
3) How does WLS know to use OID for obtaining credential, identity, and policy information instead of system-jazn-data?
Any information on this topic would be very appreciated!
Thanks,
Erick

Hi,
I am using migrateSecurityStore for policy migration from xml to OID.
migrateSecurityStore(type="policyStore",configFile="t2p-policies.xml",src="XMLsourceContext",dst="LDAPdestinationContext")
when I run above command I am getting following error.
Jul 9, 2009 11:00:08 AM oracle.security.jps.internal.config.util.BootstrapConfig
urationUtil getCredentialFromBootstrapWallet
SEVERE: Cannot get credential. Reason java.security.PrivilegedActionException: o
racle.security.jps.service.credstore.CredStoreException.
COMMAND FAILED due to an unknown reason, Check the stack trace for details
Traceback (innermost last):
File "<console>", line 1, in ?
File "D:\JDEVST~2\JDEVEL~1\common\wlst\jpsWlstCmd.py", line 780, in migrateSec
urityStore
File "D:\JDEVST~2\JDEVEL~1\common\wlst\jpsWlstCmd.py", line 752, in migrateSec
urityStoreImpl
at oracle.security.jps.internal.policystore.ldap.LdapPolicyStore.<init>(
LdapPolicyStore.java:230)
at oracle.security.jps.internal.policystore.ldap.LdapPolicyStoreProvider
.getInstance(LdapPolicyStoreProvider.java:108)
at oracle.security.jps.internal.policystore.ldap.LdapPolicyStoreProvider
.getInstance(LdapPolicyStoreProvider.java:55)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServ
iceInstance(ContextFactoryImpl.java:139)
at oracle.security.jps.internal.core.runtime.DelegatingContextFactoryImp
l.findServiceInstance(DelegatingContextFactoryImpl.java:61)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getConte
xt(ContextFactoryImpl.java:170)
at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getConte
xt(ContextFactoryImpl.java:206)
at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getCo
ntextFromConfig(JpsContextFactoryImpl.java:171)
at oracle.security.jps.internal.tools.utility.util.JpsHelper.getContextF
romConfigObj(JpsHelper.java:115)
at oracle.security.jps.internal.tools.utility.mgrs.JpsPolicyAPIManager.g
etPolicyStoreForDestination(JpsPolicyAPIManager.java:157)
at oracle.security.jps.internal.tools.utility.destination.apibased.JpsDs
tPolicy.<init>(JpsDstPolicy.java:186)
at oracle.security.jps.internal.tools.utility.destination.JpsInitializer
Dst.getDestinations(JpsInitializerDst.java:82)
at oracle.security.jps.internal.tools.utility.JpsUtility.<init>(JpsUtili
ty.java:63)
at oracle.security.jps.internal.tools.utility.JpsUtilMigrationPolicyImpl
.migrateAllPolicyData(JpsUtilMigrationPolicyImpl.java:234)
at oracle.security.jps.tools.utility.JpsUtilMigrationTool.executeCommand
(JpsUtilMigrationTool.java:167)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsRuntimeException
: Cannot read the default policy store.
thanks and regards
KishoreM

Does WLS use OracleOCIConnectionPool to create it's pool?

Similar Messages

Maybe you are looking for