Doing an insert behavior in Dreamweaver CS five and Access?

so there I am doing  an Insert Record into a table  in Access. I have used this behavior before and have had no problem. When I am doing a form element type selection (for each field in the record) I have no problem – except for the second field. The default value <ignore >cannot be changed: there is no drop-down list as there is with every other field. I have tried changing the name of the field (from Fullname to Fname) thinking that this might be a reserved word problem, but it is not. What could be the problem and what might be the solution?
Thanks!
Ross

I've attached a screenshot might depict my dilemma a little more thoroughly: about a picture being worth 1000 words? With this I double clicked on the insert behavior. Notice the "insert into column" drop box which has the phrase <ignore > highlighted?I want to have  fname inserts into fullname but I cannot do so. I have tried changing the field name in the  Access database itself but it makes no difference. I have even tried setting it to a bogus value – one on the list – but I get complaints at runtime about the same input field be stuffed into two columns. So how do I get the actual field name for the column, Fullname, instead of the <ignore >??
Ross

Similar Messages

  • Strange behavior of auto-create destionations and access control

    I'm noticing some strange behavior that looks like a bug in IMQ 3.5 SP1 (and earlier). I can't find any mention of this in the Sun Bug parade so I thought I'd ask here.
    Background:
    1) Admin-created queue named 'foo' exists. Verified with imqcmd.
    2) User 'bob' wants to access 'foo' as a consumer.
    3) accesscontrol.properties, relevant sections:
    queue.foo.consume.allow.user=bob
    queue.create.deny.user=*
    4) When config.properties has:
    imq.autocreate.queue=false
    then the connection works fine.
    5) However when config.properties has:
    imq.autocreate.queue=true
    the following error is provided when connecting:
    com.sun.messaging.jms.JMSSecurityException: [C4077]: Client is not authorized to create destination : foo
    My reading of the manual says that user 'bob' should be able to connect to destination 'foo' even though he doesn't have the queue creation privilege because 'foo' is an administratively created queue that already exists.
    A short term workaround is to allow all users to have the create privilege. This is not a good thing from a security design standpoint. I want only one user to have this privilege and all others should not have it. Unfortunately, without this privilege, all other users can no longer connect.
    Thanks in advance for any help you can provide on this issue.

    I've reproduced this and it sure looks like a bug. I've submitted bug:
    5024685 ACLs: queue.create.deny.user=* and imq.autocreate.queue=true interact poorly
    I think the best workaround is to set imq.autocreate.queue=false
    and administratively create all destinations.

  • How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver?

    How do I maintain responsive scaling on an edge animate animation when I insert it into dreamweaver? Please and thank you!

    example.com is a generic http:// address to illustrate the difference between what you gave, file:/// and an actual URL address.  There are no tutorials on that site.  Sorry for the confusion.
    #1 Have you procured your domain name and web hosting yet?  You'll need to do that to publish your pages online.
    #2 When you sign-up for web hosting, the company will send you FTP log-in credentials to your site's web server.    You will enter this info into your DW Site Definition.  Site > New Site >  See screenshots below:
    Under Servers:  Root Directory is whatever your hosting company tells you to use.  This varies by web host.  Some commonly used ones are public_html, www or htdocs.
    After your site definition is set-up, hit the TEST button to confirm it's working.  If it's not connecting, go to More Options.
    Go to the Files Panel (F8).  Use the UP Arrow  to PUT files to remote server.
    Use the DOWN Arrow to GET files from server to your local site folder.
    Post back when you have finished uploading your work to the remote server.
    Nancy O

  • Inserting FLASH into Dreamweaver cs3

    I am trying to build a VERY basic website in Dreamweaver. Using their single fixed column, centered,template, i would like to ad 2 flash items, a menu and small movie, in to he top of the column. (Both flash items are larger than the column with, if that matters,i was going to resizxe them  nce  i  got  this part of the  cose  correct)
    For some reason the flash movie shows in my Dreamweaver preview, but not when i load it live online  @ www.srg-buffalo.com.
    The address i have used for the flash movie is: http://www.srg-buffalo.com/flash/header_v8.swf
    The website is hosted at www.swq-buffalo.com, if you want to check out the source code.
    I have no idea what I am doing wrong, i thought it was pretty simple, there is no flash block via my go daddy host.
    How i  inserted it  via dreamweaver  cs3:
    Insert> Media> Flash.
    URL= http://www.srg-buffalo.com/flash/header_v8.swf
    What am  i doing wrong?
    Thanks for any help.

    Thank you,
    That rung a  bell.
    I uploaded  both  saved .SWF documents to  the Scripts directory.
    There was also  a  Scripts dirrectory saved  with index.html,  in this directory was the  AC_RunActiveContent.js  file,any thoughts on that?
    i  uploaded it to  scripts,along witht he  others, and the space  dedicatd to the flash events is there, but they are not  showing.
    http://www.srg-buffalo.com/
    D. Jude Bulera
    Buffalo, NY
    [email protected]
    Date: Wed, 17 Aug 2011 12:45:32 -0600
    From: [email protected]
    To: [email protected]
    Subject: Inserting FLASH into Dreamweaver cs3
    When you insert the SWF, you shouldn't have to actual type anything - it's a browse and select process and will automatically enter the correct path to the SWF. Then you have to upload the page and the SWF file. This next part I think has changed in later versions of DW, but in CS3 I'm pretty sure the process will also create a folder named Scripts. This folder along with it's contents also need to be uploaded.
    >

  • Insert Flash with Dreamweaver CS3 Question

    So I have been building websites for awhile and have always relied on the built in insert flash object that came with dreamweaver as I have never had issues with it.
    However as I finished a site recently the client had a friend look at it and brought up the red flag that the site was not w3 compliant.  So I go and look at the little tool they have and the only error that comes up is related to the insertion of flash on the page.
    I googled it a bit and found a number of people saying that the insert flash through dreamweaver will no show up as compliant.  A couple solutions to fix the problem.
    But before I go down that road, I want to ask. ...Does it really matter here?  Seems like Dreamweaver insertion would be compliant? I mean come on the link that the w3 give to fix the problem is a link from a fix created in 2002.
    I have never heard of anyone saying no the flash does not show up so right off I am not terribly concerned but it would be nice to know..
    Also if it is important and suggestions as to a nice fix to the issue would be great.
    Thanks for your time,
    Chris

    Right you are!
    I tend to spot check pages and haven't done a W3C check on a flash embed in my websites (apparently). Just did one pursuant to your question. The page is 100% compliant without the Flash video. has 51 errors, 35 warnings with it. Lots of those errors are Adobe-generated Javascript that handles the flash video insert, skins it and so on.
    Here is where Adobe may not be compliant with the W3C.

  • Latest pages change does not insert page numbers

    Went to add the page number in a document and it does not insert the number or give a choice as to the format of that number.  anyone know a fix?

    Acrobat has no way to know which bit of character string on each page is the page number.
    The visible page number has never formed any part of Reader nav. as you point out, it couldn't.
    Acrobat knows the Numbering Properties of the pages as created in Frame. It just doesn't display or honor them consistently, depending on Reader version.
    I also use i, ii, iii, iv for pre-narrative material. The romans are displayed in the page number box of Acroread (this is AR7 on Unix). I can enter "ii" in the box, and go to that page. But the Print dialog is Ordinal only. Printing page ranges in AR7 is always off by 2 or 4 relative to the actual page numbers.
    Acrobat Pro 9 (9.4.5, Win7-64) seems to be more consistent, and does show and accept real page numbers for Print.

  • I have a DVD I recorded from my tv.  I am trying to make copies and when I insert the DVD I get a message saying it is blank even though it is not.  My question are: Why does my computer think it's blank? And how can I copy a DVD?

    I have a DVD I recorded from my tv.  I am trying to make copies and when I insert the DVD, I get a message saying the DVD is blank, which it is not.  My questions are: Why does my computer think it's blank?  And how can I copy the DVD providing my computer recognizes there is content on it?
    Thanks, Sheila

    TV video typically is copyrighted content.  We'd be breaking several rules trying to help you.  Good luck!

  • Inserting flash in Dreamweaver.

    now I have seen tutorials over and over and I have done this
    website 3 times now. I do the div's first at then I do make an
    editable region and save the template. Then I do the pages.
    Then I go to the left middle div to insert the flash (in the
    template) and then save the template.
    It asks me to update site.. I choose Entire site and library.
    After that I check my pages... and the flash fil wont show..
    It only shows in the template,
    I have read some many website the my eyes almost pop out. So
    now this forum is my last resort.
    Why does the flash not show???
    http://nilleagentur.dk/test/nilleagency/index.html
    thank you in advance

    i would think that you would just copy the code from the html
    page that lightroom generates and paste it into a div on a page in
    your existing site, no?
    to know for sure, i would probably make sense for you to post
    a link to your site and tell the community here where you want the
    lightroom content to go.

  • Error while doing an INSERT or an UPDATE to the DB(MS Access)

    I get the following error while inserting or updating the database (MS Access in my case). However, the record does get inserted or updated. Please advice. I just want to get rid of the error to utilize my form.
    Error :ado2xfa operation failed. It, cannot be found in the collection corressponding to the requested name or ordinal
    Thanks.

    If you mean fix it, by continuing to use an insert statement and not have the error appear, then no. The best you can do is catch the error and ignore it and hope this continues to work in the future.
    The way not to get the error would be to use the addNew() and update() methods of the data connection, where the values in the bound fields would be updated in the DB.
    Chris
    Adobe Enterprise Developer Support

  • How to give a javascript alert befor doing any insert or update

    Hi,
    Is there any way to give a javascript alert befor doing any insert or update? I want to use default insert/update button.
    Thank you
    Sumita

    just add:
    alert('Updating Record...');
    in the onClick event field for the UPDATE_TOP/UPDATE_BOTTOM button.
    You can do the same for the INSERT_TOP/INSERT_BOTTOM button. Adding javascript code in the event fields will not supersede the default PL/SQL events assigned to those buttons, unless you specifically remove the PL/SQL code (e.g. doUpdate;)..

  • UPDATE_INSERT only updates, does not inserts

    Hi !
    I have a jdbc receiver scenario. Testing it via client http adapter in BE QoS, when trying to send an UPDATE_INSERT action type message, with only 1 record data, using a new primary key value that works correctly from the SQL console (I use a new PK data each test),  the record does not get inserted. I'm using 1 access node and 1 key node. (If I try to update a previously existent record, it gets updated correctly)
    I receive:
    <update_count>-1</update_count>
    <insert_count>0</insert_count>
    with the update count as negative !!!!
    If I use the same target XML message, with @action=UPDATE, it returns:
    <update_count>-1</update_count>
    If I use the same target XML message, with @action=INSERT, it returns:
    <insert_count>1</insert_count>
    and it works !!!! , but I need an update_insert action to avoid a previous lookup to determine if I have to update or insert.
    What am I doing wrong?
    Regards,
    Matias.

    Hi Bhavesh !
    Thanks !
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
       <ns0:Message1>
          <ns1:mt_xxxxxx xmlns:ns1="urn:xxx">
             <families>
                <family action="UPDATE_INSERT">
                   <table>family</table>
                   <access>
                      <cdg>FF3</cdg>
                      <descripcion>nuevo</descripcion>
                      <tipo>M</tipo>
                   </access>
                   <key1>
                      <cdg>FF3</cdg>
                   </key1>
                </family>
             </families>
          </ns1:mt_xxxxx>
       </ns0:Message1>
    </ns0:Messages>
    Any ideas?
    I guess that if the update_count would be "0", instead of "-1" then the jdbc adapter would try to make the insert...I don't know what -1 means !!!
    Thanks.
    Regards,
    Matias.

  • HT1338 When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk.  Any ideas on how to fix this problem?

    When I insert a disk, a disk icon does not appear on my desktop, nothing happens and there is no option to eject. I have to restart in order to eject the disk.  Any ideas on how to fix this problem?

  • Exception while doing bulk insertion

    Hi,
    I am trying to do a bulk insert of records into a table using my application. I am using prepared statement to achieve this. I am getting the following exception while doing bulk insert.
    java.lang.NegativeArraySizeException
    I am using SQL Server driver version 2000.80.380.00 for this. The database type chosen is JDBC-ODBC.
    Your early response is appreciated.
    Regards
    Ramesh

    Hi,
    I am trying to do a bulk insert of records into a
    table using my application. I am using prepared
    statement to achieve this. I am getting the following
    exception while doing bulk insert.
    java.lang.NegativeArraySizeException
    I am using SQL Server driver version 2000.80.380.00
    for this. The database type chosen is JDBC-ODBC.
    Your early response is appreciated.
    RegardsLooks like one of your arrays has a problem with its size, possibly a negative size!
    It could be a problem...
    somewhere...
    in your application...
    in the code...
    somewhere.
    Possibly at the line number indicated by the exception... just a wild guess!
    Thought about looking for it? Thats what I'd do first.
    Or do you expect someone to say "Ahhhhh 2000.80.380.00 marvelous plumage, bugger with the bulk inserts"

  • PWA 2013 "Add a new task" - inconsistent task insertion behavior

    Hi all!
    New to the forum and wondering if anyone out there has insight into what I've encountered with the "Add a new task" feature in on-prem Project Server 2013.  
    First some context... I am setting up 12-month projects for different teams to forecast and log their administrative and reactive time for the year.
     We are tracking this within enterprise projects.  The projects have a series of summary tasks that serve to categorize work.  There is a placeholder task within each summary task that establishes duration and where we may assign generic resources
    to establish a baseline cost for the 12 month period for that category of work.  The vision is for team members to go to their PWA Tasks list, "Add a new task", select the project and the summary task to categorize and add their new task to
    the project, enter the task information, and submit for approval.  
    My issue appears when the Project Manager approves a task and opens the project in Project Professional because the system appears to exhibit inconsistent
    behavior - Scenario 1 vs Scenario 2 below.  
    Scenario 1 – Project structure prior
    to adding a new task:
    Project Summary Task, 260d
    -Summary Task, 260d
    --Placeholder Task, 260d, generic resources assigned, ID=n
    -Summary Task, 260d
    Team member adds a new task and submits.  The new task is inserted as a child task to the summary task selected when adding
    the new task.  This is what PWA Approval Preview shows and what is found when file is opened in Project Professional:
    Project Summary Task, 260d?
    -Summary Task, 260d?
    --New task just added, 2d?, named resource assigned, ID=n
    --Placeholder Task, 260d, generic resources assigned, ID=n+1
    -Summary Task, 260d
    Scenario 2 – Same project structure as scenario 1... team member submits a new task
    and the new task is inserted per below.  This is NOT what PWA Approval Preview shows.  PWA shows the new task as a child of the summary task.  Once approved and the file is opened in Project Professional, the task instead reflects as a child
    task to the placeholder task, and impacts the duration of the original summary task:
    Project Summary Task, 260d?
    -Summary Task, 2d?
    --Placeholder Task, 2d?, generic resource assignments, ID=n
    ---New task just added, 2d?, named resource assigned, ID=n+1
    -Summary Task, 260d
    I am using separate project files to produce the scenario, and as far as I can tell they are set up exactly the same, but one file consistently produces
    scenario 2 behavior and the other consistently produces scenario 1 behavior. It seems that something is different between the two files and causing the issue, but I can't figure out what it is.  
    Any idea what I could do to establish consistent (preferably Scenario 1) task insertion behavior from PWA?

    Anyone else running into this?  We're now on the April CU and still experiencing this apparent bug.  I've replicated it in different PWA instances using "Add a new task" from both the timesheet and tasks.  
    It only happens on certain projects as Greg mentioned... One way we've been able to pinpoint where it's taking place:  since the bug causes a task to become a summary task, and since most of our tasks have assignments, if a project contains any summary
    tasks with assignments, those may be an early indicator of the bug (after we rule out PM-induced summary task assignments).  
    We're seeing this impact our project actuals and reports, so there is a fair amount of going back through approval history and restoring actual hours to the correct calendar dates in the Project Client.  Not ideal, because we are planning to lock that
    capability down in the near future.
    On a whim, I tried using the "Save for sharing" method to fix the issue, and new tasks appeared to insert correctly after that.  Seems OK for a workaround (we'll see how durable it is), but better yet would be consistent new task insertion
    behavior.

  • How does one insert symbols in Pages?

    how does one insert symbols into a Pages documeent?

    do you know about the press and hold trick on the standard keyboard? try to press and hold on the letter A and watch the menu that pops up, or try to hold the zero key to get degrees.

Maybe you are looking for