Doing the impossible? Finding rogues from the wired side

Wondering if anyone has found a valid tool (beyond the sourceforge APTools kind of stuff) to assist in finding APs by culling through the ARP tables on routers etc... brutal stuff here I know. Also- anything in a wireless frame/packets common to all APs (all vendors as part of 802.11) that can be filtered on at the router to possibly block traffic from rogue APs? I think not, but I'm scratchin at anything here...
Lee Badman
CWNA Network Engineer

Hi ,
In AP350 has fnew feature which may help you .
The process takes place as follows:
1. A client with a LEAP profile attempts to associate to a access point A.
2. Access point A does not handle LEAP authentication successfully, perhaps because the access point does not understand LEAP or cannot communicate to a trusted LEAP authentication server.
3. The client records the MAC address for access point A and the reason why the association failed.
4. The client associates successfully to access point B.
5. The client sends the MAC address of access point A and the reason code for the failure to access pont B.
6. Access point B logs the failure in the system log.
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/accsspts/ap350rn/rn1200.htm

Similar Messages

Why does the frunt side of my camera, flip my pictures

why does the frunt side of my camera, flip my pictures

That's actually exactly what is supposed to happen. Otherwise your front cam pictures would be mirror images.

HT201956 Why does the right side of the menu bar disappear or blink when I turn on my epson XP200 printer?

Why does the right side the menu bar disappear or blink when I turn on my epson XP 200 printer?

I have also been experiencing the same problems. Mac user since 1991. I own various machines but this particular problem lies with a MacBook Pro 2008 using 10.5.4
The laptop has two users. One is fine while one is not. A new user was created but upon logging in for the first time the right hand side of the menu bar blinked off and on just like the existing user. No hard drives have been connected. All files backed up via drag and drop wirelessly.
Since this development I have been unable to get to my iDisk; it might be related or coincidental. Last night I re-entered my .mac/MobileMe account details whereupon I was presented with a message saying the machine had not synced before. Not true. It had been syncing automatically since the day of purchase March 2008. I wonder if there is a connection between somewhere deep down in the Library, updated versions for 10.5.4 and MobileMe. Somewhere along the line a combination of events triggered the tool bar to start blinking...
It's strange how one user is fine (seldom used and DOES NOT have a MobileMe account) while the main one, me, is not fine (used heavily throughout the day and DOES have an active MobileMe account).
At this point, I don't intend to re-install and start all over again (I've done this so many times with other machines over the years that I was hoping those days had finally gone based upon Apple's brilliant recent advancements).
Any help or comments will be welcome.
Cheers!

Why does the left side of mbp 4.1 get abnormally hot? What's is the problem?

Hello Everyone:
The bottom of my 2008, 15" 4.1 mbp has always gotten very hot. lately however, it gets extremely hot. The other night, I fell asleep with it open, on my lap and it literally burned me and left a nice blister on my lap. I think the fans are working because in a recent update, I've forgotten which one, the fans did go on and I heard them. Is this kind of heat normal? What, if anything, should I be doing to ensure it's not going to burn itself out? Obviously I'm not going to put it on my lap again but it's never done that in the past. Any thoughts anyone?
Thanks in advance for your help. I can't do much internal work since I've recently suffered a small stroke-like issue that's paralyzed my arms and taken fine motot movement out of my hands. If it's easy work htough, I may be able to get one of my kids to give me a hand.
Help please?!??
CC

Ok Austin. I've downloaded iStat. I can barely see the writing but the app is totally interesting. If there's a way to enlarge it without having to use the 'control' function to zoom in on it, that would be great. Aside from that, it looks like it may well tell me what's happening to my system's temps. As for the overheating, what you said is very interesting. I may very well be blocking one of the fans. We shall see! Thanks and hopefully blocking one of the fans!
Talk to you tomorrow. Hopefully I'll have had a chance to review the stats by then. Take care!
CC

ISE on the wired side

We are currently working with a consultant on a project to implement and upgrade our wireless network. The question that we were asked is, do we want the wireless only licensing for ISE or wired and wireless licensing. Is 802.1x in a wired situation where access ports are fairly restricted into offices, or areas where supervision is present, worthwhile? Do I have the wrong perspective on 802.1x?

Now, I'm not ISE specific here... from the top of my head.
Granted that your employees the benefit for wired might be minimal. The concern mostly comes from security folks who would want to make sure that you're plugging in a proper device into a port.
Also, what you could gain is, that wherever you would plug in your PC you would still have same policies applied.
If you do have conference rooms with wired access and are inviting third parties, you might benefit from wired dot1x.
I'm sure there's more but benefits will depend on specifics of the environment :-)

Does the Livecache SID always have to be LCA ?

We have installed APO Livecache with SID other than LCA and I'm being told that it has to be LCA always ?
Is this true ?
If it is, why is the install tool gives the option to pick a SID ?
Or is there a config setting in SAP to change this default setting ?
Thank you

Hello Ravi,
Please check the SAP Note No. 829963.
Please review the documents at service.sap.com/scm ->mySAP SCM Technology:
"mySAP SCM Technology" & "liveCache overview " .
In case of a new installation of the liveCache/LCA, you have to create the connections LCA/LDA/LEA
as described in the installation documentation for the SAP liveCache technology - using
Transaction LC10. For example, review the document at
service.sap.com/instguides -> mySAP Business Suite Applications->
mySAP SCM -> Using SAP SCM 5.0 Server->
"Installation - SAP liveCache Technology " in the section
"Common Post-Installation Activities" - "Setting Up the Connection to the liveCache Instance".
Please review the information at service.sap.com/liveCache ->Release Information ->
   SAP LC/LCAPPS 5.0
You could run /n/sapapo/om13 -> checks & see the status for LCA & LDA & LEA
connections. If the connection is marked by the red semaphore => check errors in /nsm21.
You could run the test connection for LCA & LDA & LEA in db59 transaction and review the results.
Please open the OSS ticket to the component 'BC-DB-LVC' or 'BC-DB-LCA' if you have further
questions on this issue.
Thank you and best regards, Natalia Khlopina

How do I know what is the host-side FIFO depth?

Hi.
In LabVIEW FPGA, the FIFO.Configure Method lets you determine the depth of the FIFO on the <u>host</u> side.
If my VIs have never included this method, is there a way of knowing how deep this FIFO has been all along?
I set my FPGA-side FIFO to be 8k deep. What depth does the host-side FIFO default to?
I am asking because I am getting some failures in my test VI that uses FIFOs and I suspect overflows are to blame.
Thanks,
AlejandroZ
Solved!
Go to Solution.

Here is a copy+paste from a post I made back in May 2010. I'll add some tags to the original so it should facilitate easier searching.
The DMA FIFO is actually implemented in 2 parts, you define the FPGA size in the project explorer(actual FPGA fabric), the Host side is defined programatically (Host RAM).
There is a configure method you can run on the Host, the default for the Host side is 10,000 elements. I would set the FPGA side much smaller, 1000 or so elements, save a lot of FPGA fabric. Configure the Host side to 64,000 or something.
Here is a help link to the Configure method:
http://zone.ni.com/reference/en-XX/help/371599E-01/lvfpgahost/fpga_method_fifo_config/
and a link to the DMA FIFO help:
http://zone.ni.com/reference/en-XX/help/371599E-01/lvfpgaconcepts/pfi_data_transfer/#DMA_FIFOs

Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) is also wired to the LAN, and can access all wired printers through the router. Wireless Macs cannot even find the printers.

Does Tiger require ownership (and sharing) of wired printers on a wireless LAN? My G4 (Tiger) and all printers are wired to the LAN, and the G4 can access all printers through the router. Additional wireless Macs (Snow Leopard and Mountain Lion) cannot even find the printers. Yet, if the G4 shares the printers, then ALL computers on the LAN can access them. However, this requires the G4 to remain powered. Is there a workaround that would allow me to shut down the G4 and still use the printers?

Hello BDAqua!
Well, I am halfway there. Following your steps on the Snow Leopard MBP, the newer printer (a Canon MX860 inkjet) appeared automatically under the "default" icon on the ADD printer window. I used the IP icon with the HP Jetdirect-Socket protocol to find and add the older printer, (an HP 4000N). That required running a configuration page from the printer to locate its IP address. I printed to both printers through this laptop with success!
I then followed exactly the same procedure with the Mountain Lion MBP. For both installation attempts, I got an error message window: Unable to verify the printer on your network. "192.168.111" may not exist or is unavailable at this time. Would you still like to create the printer? If I click Continue, it creates the icon and name in the printer list. However when I attempt to print from an app. the next message says, 'Printer is unavailable.'
Why one laptop finds and uses both printers, and the newer laptop does not, just floors me!
Thank you for your ongoing assistance.
Bill

The Elements 12 Mac disk works fin - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

The Elements 12 Mac disk works fine - I also have a Dell, and the Windows disk will not run at all, sounds like it's grinding, and is almost impossible to remove from the hard drive. I cannot find any place to tell me who to CALL to ask for a replacement!

Hi Samcat,
You can use a download instead of the disk as an alternative: Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe you can license with your serial
Please test the disk in another windows machine to check if it's caused by the drive or the disk. If you tested with 2 drives please start a support case, i assume Adobe will only provide downloads at this point. They are the same as the trials. If you still need a disk you can burn the trial to a disk as a backup disk. Good luck!

I have an iphone 4 which was lost on the bus ride home from an amusement park with my class. The phone does not have find my iphone on it and i cannot track it. Is there anything you guys would say i should do to get this phone back.

I have an iphone 4 which was lost on the bus ride home from an amusement park with my class. The phone does not have find my iphone on it and i cannot track it. Is there anything you guys would say i should do to get this phone back.

Call it and ask whoever answers to give it back to you.

Can I use "find my iPhone" from my Mac? If so, where does the app reside?

I have Find My Mac on my iPhone, but can this be used from the Mac to find the iPhone? If so, where does the app reside on the mac?

Which browser? Safari, Finder ETC.
In icloud on my desktop(system pref) I can only selet the tick box next to Find My iPhone.

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How Can I Remove the Finder Icon From the Dock?

Hi! Can someone tell me how to remove the Finder icon from the dock? I don't even care if Finder quits. I just want it removed from the dock. I really don't care if I can't get to my files. Please help.

Start by going to your core services, (/system/library/coreservices). You can do this by pressing Shift+Cmd+G and then paste (/system/library/coreservices), without parentheses.
After doing this, find Dock.app, right click, show package contents. This doesn't contain the icons on your dock, just finder and trash.
After that, move all finder services to the desktop, and then erase them from the core services folder. At this point it will prompt you to put in your password, do so.
Next you'll want to open terminal and type 'killall dock' or, you could restart your computer.
This should remove the finder icon from your dock, while still giving you access to it from your desktop.
Hope this helps!
-C

How do I move a back up to another external drive and how does the Mac Book then find the new back up?

how do I move a back up to another external drive and how does the Mac Book then find the new back up?
I currently have the back up on a Time Capsule, I want to move it from the Time Capsule to another external hard drive.

Did you read the link to the Pondidni website? You will have to select the Time Machine HDD for the new MBP and the old one in System Preferences>Time Machine:
Ciao.

Doing the impossible? Finding rogues from the wired side

Similar Messages

Maybe you are looking for