Don't advance when partially correct
I have a multiple choice question with multiple answers, I enabled the option to make it partially correct when the user selects one of the correct answers, but after showing the feedback for partial correct, it advances to the next question, how can I prevent the user to advance to the next question when it's partially correct? So that the user stays in that question until it's answered 100% correctly.
Thanks!
I'm sorry, but with the present design for MCQ slides with partial scoring this is not possible. Either you don't use partial scoring and allow the user infinite attempts on Question level, or you create custom questions using standard objects and advanced actions.
Lilybiri
Similar Messages
-
I had water damage to my iphone5 when I was deployed w/ the military overseas. How can I find out what saved to icloud and how to see where my photos are. I don't know when it was able to back up as wi fi was pretty sketchy. please advise. thx in advance
My iphone is toast, I know I checked on icloud and see my emails from the day before it happened. Can I see when and what my phone backed up through itunes or icloud?
Please please help i am lost.This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that? -
When I open my iPhoto a popup shows up and I don't know how to correct it the popup:
"The current screen resoulation is not optimal for iPhotp"?
Can you help?Go to the System/Accesability preference pane and enable the Zoom capability either with keystrokes or Magic Mouse:
See if that will work for you.
OT -
I am creating a quiz in Adobe Captivate 3 and I have created
a multiple choice question that has more than one correct answer.
How can I set it up that the user would get some points for getting
an answer partially correct?
Thanks in advance.Hi Damo,
I have had this exact same issue when building assessments. I
have a workaround, by using a bit of initiative...I use the 'Short
Answer' question.
I show a text caption with possible answers and a letter next
to each in bulleted layout.
eg
A - option 1
B - option 2
C - option 3
D - option 4
E - option 5
I instruct the learner to enter the letter in the box for
their chosen answer (I reduce the size of the entry box to a small
box).
Now, in the 'possible answers' section of the question
properties, enter the letters of the acceptable answers, ie if a,
d, and e were all correct possible answers, enter each of these on
their own line
Now if the learner takes the question and answers a, d or e,
they will get the question correct, it doesn't matter if they enter
Caps or lowercase, so long as you ensure the 'Answer is case
sensitive' is un-ticked.
You could also alow for multiple entries ie A, D together.
Simply add these as additional acceptable entires on their own line
in the question properties, but be sure to instruct the learner how
to enter these ie enter letter of choice with space between or
seperate with a comma eg A,D.
You need to make sure you have an acceptable entry for every
combination, ie A,D A,D,E A,E etc etc
The only down side is they wil only score the one mark for
the question.
Webbo -
My folders that my message rules on iCloud divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder individually for it to update. A real pain as I have about 30 folders. Is there a way around this ? The folders update on my mac fine when i check mail without having to select each one of them. Can the iPad and iPhone do the same thing?
My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years). I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely.
Is this what I have to do?
Thanks for your help! -
I have some days ago started updating of Firefox for Mac OS 10.6.8 under Help but it is paused and the upgrading don´t continue when i start again
Hi Ryan,
I managed to find this reference specifically for restoring on Snow Leopard:
If you are using Mac OS X Snow Leopard, start your computer from the installation disc. Then use the "Restore From Time Machine Backup" utility.
Now that was copied from this more comprehensive reference:
Mac Basics: Time Machine backs up your Mac
You may also find this article helpful:
http://pondini.org/TM/14.html
Finally, I cannot see why Time Machine would leave out your playlists and ratings? Think about it. Why would Time Machine specifically copy everything BUT your playlists and ratings? Ryan, what are your options? I would have to ask you this: Are you certain that you properly did the sync? That is another/different forum altogether: Using iPhone /see subsection on Syncing.
Either way...
Best Regards,
mm
EDIT: For whatever reason I tried three times to edit out one of the redundent adjectives... either different or another which preceeds the word forum, but the advanced editor would (apparently NOT allow me to do so). I hope that it doesn't render without any adjective before the word forum. -
New topics are compiled in but don't display when help button is pressed
Folks,
I'm using RoboHelp HTML Build 6. I am the only writer who uses RH and have been using this build for 2 years or so.
I recently got a new map file from the developer containing 2 new map IDs. I used the same steps to import the map file, create the new topics, and map them to the new map IDs that I have been using for years. But when I compiled RH and pasted the chm into the application folder, those 2 new topics don't display when the help button is clicked on the dialog box to which they are mapped.
When I generate the chm I can look at the output at the bottom of RH project view and see that that the 2 new htm files are being compiled into the RH project. I can also see them if I open the generated chm and go into the TOC and click on a link to them.
Does anyone have any ideas? I have tried redoing the usual procedure (see below) for the importing and mapping from scratch several times. I have also tried BugHunter (see below).
Procedure for Importing and Mapping (this time the help for all the older dialog boxes works but not for the 2 new ones)
1. Open the new map (.hm) file from the developer and add #define followed by a space to each entry beginnng with the string HID in the new map file (I don't know why but nothing works unless I do this.)
2. Delete the old map file from the RH project.
3. In Windows Explorer, copy the new .hm file into the RH project folder.
4.In Project Manager view, open Context-Sensitive Help. Right-click on Map Files. Select Import. Browse and select the new map file.
6. Map the new topics using File, Edit Map IDs.
7. Generate the .chm and pasted it into the application where it always goes.
BugHunter Procedures and Results
I first tried the Test HTML Help API dialog.
I specified the .CHM file I compiled and tested both options:
--HH_DISPLAY_TOPIC: I put in the name of the new help (htm) file and its relative path and clicked Help. Nothing happened.
--HH_HELP_CONTEXT: I put in the Map Number for the new dialog box and clicked Help. The new help topic I had created displayed.
I also used the Tools tab in BugHunter to do a CSH (context sensitive help) Test. I identified the chm file and opened it and put in a new map number, then clicked Show Help. Nothing happened.Welcome to the RH forums.
On the surface it sounds like you have done everything correctly so it should just be a case of going back and double checking that you have the correct CHM, that the mapid is exactly the same as in the app and that the app has been updated.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter -
Can Captivate be set to advance when only a certain key is pressed
I am doing software training simulation. I am trying to teach the user how to do a set of tasks. In the software you must press certain key to accomplish certain steps so I want to set captivate to advance to the next slide only when the correct key is pressed such as the delete key. I am fairly new with captivate. Is this possible? Will I need an advanced action to do this? Thanks
Each interactive object, like a Click box, can be assigned a shortcut key. If you are capturing the software training simulation (Automatic), those click boxes are created for you. In the Properties panel of the Click box you can assign the shortcut key. Normally you do not need an advanced action for that. And be sure to give Infinite Attempts if the user can only proceed when that shortcut key is pressed (but avoid frustration, maybe with the Hint caption?)
Lilybiri -
I get the following error message and don't know how to correct it: Sync encountered an error while connecting: Unknown error, Please try again.
There have been problems reported with Sync.
They are working on it, so please try again later when those problems are fixed.
*https://services.mozilla.com/status/
*http://twitter.com/#!/mozservices -
Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?
If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Is it possible to turn off the fluid grid function in dreamweaver during the process of building your site by mistake? It was working fine and simply stopped and I don't see how to correct what is wrong.
There is no specific function that turns FGL on or off.
When you say that it has stopped, do you mean that the handles no longer show?
If that is the case, then I think you may have modified the CSS to such an extent that Dreamweaver no longer recognises it as belonging to FGL.
There are a couple of avenues for you
Redo the site and make sure not to touch the FGL CSS
paste the code here so that we can see what has gone wrong. -
What is done by Flash when you press "Show all" option???
Hello,
I need technical information. I'd like to know which kind of resizing is done by Flash when you press the "Show all" option. What differences between "Show all" and 100% are there???
I'm programming an application and the Flash Player Proyector always has the "Show all" option enabled modifying the size of my content!!!!!
Thanks in advance.https://support.mozilla.org/en-US/kb/firefox-sync-take-your-bookmarks-and-tabs-with-you#w_wheres-all-my-data
-
When curser is on hyper link the URL will display on the bottom of the screen in the background.(where done is located when site is loaded) How do you control this function?
Do you want to control that via code on a web page to prevent visitors from seeing the link or do you ask as a Firefox user?<br />
Tools > Options > Content : JavaScript > Advanced > Allow Scripts to:
[ ] "Hide the status bar"
[ ] "Change the status bar text"
The Status Bar will be gone in Firefox 4.0 and is replaced by the (View > Toolbars) Add-on bar that extensions can use. -
I am having problems gettting my mail to work ... Mac telling me that my start up disk id full and to delete some files to free up space ... have done this but when i open mail from the dock it just brings up the colour wheel and nothing happening ... it shows when you right click on the mail icon that " application not responding"
If your hard drive is getting full, you need to free up, at least, 20 GBs of space on your iMac's hard drive.
If your Mac is running a fairly recent version of OS X, here are some general guidelines.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your iMac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Other things you can do to gain space.
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it run the automatic ans S.M,A.R.T. tests, then go to the cleaning and maintenance tabs and run the tabs that have the ability to clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck! -
When I close firefox, it closes, then later when I try to open firefox again a message opens and says firefox is already running, ---have to open task manager to close firefox before it will open again, browser may have been open for hours and didn't show to be---why does this happen, don't know when firefox closes or not------
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit
Maybe you are looking for
-
I get two error messages when I try to install 7.1 After itunes installs the update and it is going through it's last step (looks almost complete), I get the following error: "An error occurred while attempting to create the directory: C:\WINDOWS\Ins
-
Error:null while opening .bpel file
Hello, I'm getting an error ERROR:null while opening a .bpel file. Any pointers to solve it. Is it some JDeveloper bug. I'm using JDeveloper 10.1.3.3 version.
-
6i installs ok? but no 8i database created?
We are updating our oracle system. Clean install on a P4 with Win XP pro. 9i personal database rel 2 installed in OraHome92. 9i appears to be running ok. This will be used to develop against. 6i Internet Developer was then installed in oracle homes O
-
Using CheckBoxGroup with in Datarepeater
Hello BEA Experts, I ahev seen many examples of using the checkbox with in the repeater tag but is there a way to use the checkboxgroup tag with in the repeater item, I am using it as follows , can you let me know if its correct.. Thanks Experts! Bob
-
Itunes freezes when i try to sync apps
when i push the sync applications box i tunes stops responding