Don't appear a field in a query

Hi,
I have a problem with a query in th tr SQ00. In development system appeara all the fields but in the production system don't appear one field. Somebody can help me???

If it was the default variant that was giving you trouble, I would have expected that you could at least see the field as part of the field catalog. This query is being presented as ALV grid?
You should be able to add/remove columns using the standard ALV functions.
Maybe try deleting the layout variant and re-creating it.
If the new field is not in the field catalog, then your problem is in your query definition.
Regards,
Rich Heilman

Similar Messages

"Scene", "Description", "Comment", and "Log Note" metadata fields don't appear in Prelude

Can I use the "Scene", "Description", "Comment", and "Log Note" metadata fields in Prelude that are basic parts of Premiere's logging screen? I can't find them in Prelude.
I would like to continue in the Premiere (CS6) workflow I have been using of adding a Scene, Description, Comment, and Log Note. These are front and center in Premiere for logging. Yet, nowhere to be found in Prelude. As far as I can tell, all of the rest of the metadata categories will transfer. It seems that these should be in the "basic" group in Prelude, but don't appear.

I have a similar problem, but it gets weird.
I have been very very happy with the whole 'cloud' computing thing and keeping my stuff at Google. Contacts and Calendar worked flawlessly since I bought the Pre.
However, last week, I had to do a full erase of my Pre (UK-O2) because no apps would install.
I logged into my Palm Profile on the phone; logged into my Google account just after, and checked my Calendar and Contacts.
Calendar - all fine, just a few cosmetic tweaks of the colours. Good.
Contacts - not fine. Only 19 of 58 were imported from Google, and none of them had their photos. So I hit the Sync Now button a few times - with and without WiFi - with and without 3G - but that did not help.
So I waited for it to do it itself. No change.
So I did some searching on the web. I checked that all the contacts were in 'My Contacts' at Google... yes. I removed the Google Contacts account from the Pre. Then added it back again.
Weird bit coming up.... exactly the same 19 contacts were added as before!
I am at a loss really. I have even tried creating a 'googlemail' account because a web page suggested it and logging in with that.
No change. Still 19 contacts not 58.
Also, I cannot add a contact directly in the Pre and have it whizz off to Google HQ like before. This now does not work.
H E L P !
********* I will try the suggestion above and report back soon ******
Paully

Text fields cannot be deleted in field group in Query

Hi Experts,
I created an additional table ZTEST for node A in InfoSet and chose some fields which have text fields into Field Group for display.
Then in SQ01, those selected fields appeared in my Query field selection. Of course I can tick it to display or not tick it.
But when I don't need those fields, I go to SQ02 to delete addional table ZTEST in extras in InfoSet and generate it. I go to SQ01 to check whether those fields disappear or not. However, some of them are still there. e.g.
Checkbox: Text: ZTEST-TA_TYPE
Checkbox: Text: ZTEST-TA_STATUS
Since there is no such a table in Infoset, I have no other clue to delete remaining text fields. Do you have idea?
Regards,
Ying

Hello Ying,
After you made your change to the infoset, you need to completely exit out of SQ01 before running query again. Call SQ01 like it is the first time you are calling it for a logon.
Kind Regards,
Rae Ellen Woytowiez

Creation of local field in ABAP Query

Hi
Please let me know how to create a local field in ABAP query. I am finding the option inactive in SQ01.
Regards
Priyadarshini

hi priya,
     *__Adding u201CLocal Fieldu201D (user defined field) in SAP Query_ :
There is also facility to add the user defined fields in SAP query output. Also we can provide calculation formula for calculating values for this user defined field.
Calculation formula consists of standard fields from standard SAP tables. So the values fetched for particular standard SAP fields from standard SAP tables get calculated as per the calculation formula defined for the user defined field and displays the value accordingly.
To do this first go to change mode for Query which automatically takes you to screen shown below and click on icon   , as below :
Then further screen will appears. So select the Field group and again click on the same icon button   .
Then switch on the Short names for the fields and give the short names to fields which we need to use in Calculation formula.
Give the short names and then created u201CLocal Fieldu201D, as shown in below screen shot. Also Short names are given to fields, which can be used further for calculation.
Defining Local Field u201CREM_QTYu201D along with its field type and Calculation formula.
In this case we have
defined field type for new
field as similar to
ORD_QTY and
Calculation formula is
defined.
Also its possible to have Conditional logic for Local field by putting Condition in u201CConditionu201D line.
Now activate this newly added Local field for coming it in output screen. To do the same again go to u201CBasic Listu201D and activate the Local Field as shown below :
i think this will help u
regards,
sindhu.

Alignment and restriction of Custom field in SAP query report

Hi Experts,
I have one custom field in query report(SQ01) called Amount in local currency which is calculated based on Amount in document currecy * exchange rate.
But this field values are coming in left alignment instead of right alignment so how i should get in right alignment and second issue is how i can restrict field value to only 2 decimals.
I tried the below link "http://media.techtarget.com/searchSAP/downloads/SAP_Query_C7.pdf" but the steps they mentioned are not appearing in SQ01 for example in that link they mentioned to click Basic List option for advanced steps but when i click i goes directly to field list with field groups on left pane
Please provide solution for this.
Thanks&Regards,
narasimha

Hello narasimha,
In the Infoset when you create the additional field, enter an existing SAP table field that has type CURR in the parameter labeled LIKE Reference. For example you can enter BSAK-DMBTR as a value. When you select the additional field in the query, the currency will also show.
Kind Regards,
Rae Ellen Woytowiez
Edited by: Rae Ellen Woytowiez on Apr 25, 2011 11:27 PM

Addition of checkbox and 2 fields in ABap query selection screen

Hi
I need to add chack boxes and 2 fields in ABAP query which is using LDB QMI. can u pls let me know how to do that.

Hi Tarun,
I am still not clear with the problem..I guess you require plant in your selection screen which you have.
i guess if you go to sq01tcode there is a option infoset query from where you can give your selection options and value.
have you selected all the fields in infoset and made a selection screen?
When you have done with your infoset you just need to diplay the fields and there is a automatic program generated.
Let me know...
Regards,
Nihkil.

Calculated field in a query

Hi,
To begin with I am just learning EJB and JAVA so please bear with me. I want to create a calculated field in a query from two fields in the table being queried, using SQL I would write the query like this:
SELECT ledgerdate, description, quantity, unitprice, [quantity*unitprice] FROM ledger
I have created a class called ViewLedger to contain my results, it has the following elements:
DATE ledgerdate,
STRING description,
INTEGER quantity,
BIGDECIMAL unitprice,
BIGDECIMAL amount
The query that I have been attempting that fails is:
SELECT NEW ViewLedger(l.ledgerdate, l.description, l.quantity, l.unitprice, l.quantity*l.unitprice) FROM Ledger l
The error says that there is an unexpected * in the query
The following do not work either:
SELECT NEW ViewLedger(l.ledgerdate, l.description, l.quantity, l.unitprice, (l.quantity*l.unitprice)) FROM Ledger l
The error says there is an unexpected ( in the query.
SELECT NEW ViewLedger(l.ledgerdate, l.description, l.quantity, l.unitprice, [l.quantity*l.unitprice]) FROM Ledger l
The error says there is an unexpected [ in the query.
Any help would be greatly appreciated.
Thanks.

I don't think JPQL allows functions (*) in the SELECT clause.
You can use a native SQL query as a workaround. If you are using EclipseLink or TopLink Essentials, you can also use a ReportQuery.
You may also want to vote for the bug,
[https://bugs.eclipse.org/bugs/show_bug.cgi?id=219814|https://bugs.eclipse.org/bugs/show_bug.cgi?id=219814]
James : [http://www.eclipselink.org|http://www.eclipselink.org]

Pop-ups for parameter value insertion don't appear

Hi,
I am using Web Intelligence for creating a report that allows custom parameter values to be inserted via pop-up.
The problem is such pop-ups for parameter value insertion don't appear on the various web browsers I make use of.
(I.E. versioni, Firefox versioni)
Any idea on how to solve such issue?
thanks in advance,
SC

I suppose that you mean query prompts, that are parameters that are asked to the user in order to filter the data.
Which version of BOE are you using?. If you are using BOE XI R2, that problem happens when you use Java 1.6 (only when editing the document), you should use Java <=1.5 (you can check the error in the java console while you execute the report).
I think that problem was solved in a SP (not sure which SP solves this ¿SP4?)

Texts in pdf form don't appear when viewing in Acrobat nor in Reader.

Texts in pdf form don't appear when viewing in Acrobat nor in Reader nor when printed after the form has been filled. But the texts appear when one clicks inside the field. What is the solution to be able to print and view all of the texts in all of the fields that have been typed.

More than likely caused by someone filling out the form with Mac Preview.
Here's a potential fix: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html

Edir OU Objects Don't appear in Management Console

ZEN ESM Ver 3.5.0.154
I have created OU in Console One and created a Group so I can publish Policies to the group to reduce administration. The OU does not show up in the management console. I have tried rebooting, syncronising and loggin into the OU as well, with no luck.

Hi there,
With build 3.5.177 almost all of the issues you described are solved. The eDirectory integration part was greatly improved - I also suffered the issues you described in the previous releases, and you had to re-create the directory configuration in order for the new eDir objects to show up. Novell client is also not required anymore - pure LDAP communication.
As for encryption, I understand your pain as I passed for the same situation. The encryption filter driver is now improved and you'll not notice any impact on performance once you enabled it. Previous requirement for encrypting only non-system volume was almost unpracticable as no customer that I know of had more than one partition on their laptops.
In summary, I think it's worth to take a look.
We are here to help if any issue arises.
Good luck,
Daniel
>>>
From: chalmerst<[email protected]>
To:novell.support.zenworks.endpoint-security-management
Date: 5/15/2009 5:56 AM
Subject: Re: Edir OU Objects Don't appear in Management Console
dspinatto;1691558 Wrote:
> There is a new version 3.5.160 available for download at 'NOVELL:
> Downloads - Novell ZENworks Endpoint Security Management 3.5 IR5'
> (http://download.novell.com/Download?...d=D2kn-mCL_3k~)
>
> I couldn't find anything related to eDir OU's in the Known Issues
> section of the Readme
> http://www.novell.com/documentation/...me_zesm35.html,
> however maybe you can try with this newer version if it repeats.
>
> BTW, does the group shows up in the MC?
> Have you tried logging in as a user that is member of that group and
> then refresh the console to see it the group and the OU structure shows
> up?
>
> Good luck,
> Daniel
>
> >>>
> From: chalmerst<[email protected]>
> To:novell.support.zenworks.endpoint-security-management
> Date: 12/2/2008 9:56 AM
> Subject: Edir OU Objects Don't appear in Management Console
>
> ZEN ESM Ver 3.5.0.154
>
> I have created OU in Console One and created a Group so I can publish
> Policies to the group to reduce administration. The OU does not show
> up
> in the management console. I have tried rebooting, syncronising and
> loggin into the OU as well, with no luck.
>
>
> --
> chalmerst
> ------------------------------------------------------------------------
> chalmerst's Profile: 'NOVELL FORUMS - View Profile: chalmerst'
> (http://forums.novell.com/member.php?userid=37214)
> View this thread: 'Edir OU Objects Don't appear in Management Console -
> NOVELL FORUMS' (http://forums.novell.com/showthread.php?t=352773)
Sorry it's been a while but gave up after Novell tech sup informed me
that this was an issue in what was the current version at the time.
Groups that are created before the install of ESM show up and can be
published to, however, after ESM is installed if you create OU in NDS it
never shows up. Tech supp said this was an issue they hoped to resolve
in future releases. Besides this issue the data encyption had problems
as well, once the policy was published with data encryption dir the PC
utilistation went through the roof, again a bug confirmed by Novell.
There answer to this was a change that created bigger problems for our
company, you could only publish encrypted data dir to non system
volumes, however all our PCs in our company only have one partition.
Too big a job to create additional partitions to support this change.
I was using 3.5 ir5 when I experienced these issues.
I am querying this with novell since there seems to be an IR6 version
now. I doesn't show up on our product list yet. When it does I have
been tasked with testing it again to see if the bugs are out of it.
chalmerst
chalmerst's Profile: http://forums.novell.com/member.php?userid=37214
View this thread: http://forums.novell.com/showthread.php?t=352773

Custom Field in Infoset Query missing in Infoset

Hi Everyone,
I'm in a puzzle and I hope someone can help me. Basically I need to maintain an existing infoset Query - While looking through the query and it's related Infoset I noticed there is a custom field appearing in the query (SQ01) but this field is nowhere to be seen in the Infoset (SQ02) - I'm just wondering how can this be ?
The same custom field exists in another Infoset - is it therefore possible to build a query using an infoset while pulling in fields from another ?
I would appreciate any thoughts on this matter as I'm in a very confused way over this.
Thanks in advance
Kind Regards
Damien
Edited by: Damien Kesle on Jul 22, 2009 3:48 PM

Hi Damien Kesle ,
There are ways by which you can create fields ( they are called Local fields ) in the Query too.
Please see , whether the custom field you are asking is present in the Query.
Even then , just to confirm that your said field does not exist in the infoset, follow the steps.
Go to SQ02, put the name of your Infoset and click on tab "Description ".
Then do a Ctrl + F (Find/Search) for the field. If its not there, then you can confirm that the field comes from Query and not Infoset.
Approach for any further queries.
Regards,
Subin John

Text of additional fields on SAP query show blank

Hi All,
I'm encountered a problem when text of additional fields on SAP query is not working and it's show blank after HRSP is implemented.
SAP_ABA : Rel. 701 Lvl. 3
SAP_BASIS: Rel. 701 Lvl. 3
SAP_HR: Rel. 604 Lvl. 8
Below are the config that we have done before HRSP in table: TEXC_FLD_C and it's work perfectly.
Table Name: P0000_AF
Field Name: ZZAPPRATING
Function Module: ZHRGYYFMPA_PDRATING_TEXT
Exception Priority: 1
Object Type Name: CL_HR_TEXT_IDENTIFIER
During debugging, we found that program (Form: %_GET_PERAS) is retrieve text of additional fields based on structure P0000_AF. At this point, text of fields are successfully take place and filled. However, program try to retrieve the text based on structure P0000 again right after that. Due to additional fields are added on P0000_AF not P0000 and no ZZAPPRATING field found in P0000, hence program has cleared the text which filled in previously. This give the result, text is blank.
Please advise, how should I get this resolved.
Thank you very much.
Best Regards,

Please check this link:
Re: query report
I guess, it can help for your case too...
Even this:
Re: sap query infoset and fieldgroup
Re: Additional field in SAP Query
Kind Regards
Eswar

Public folder flagged items don't appear in For Follow Up search folder

Exchange Server 2013, Outlook 2010 clients. I monitor a few Public Folders for our organization and items flagged for follow up don't appear in my For Follow Up search folder. What can be done?

Search Folders do not search Public Folders. You'd have to copy the item to your Mailbox, or create a Task in your Mailbox.
Eric Legault (MVP: Outlook;
About me)
Outlook Appins: Store social media fields in your Outlook Contacts!
Co-author, Microsoft Office 2013 Professional Step-By-Step

How to view/use 0costcenter txt fields in the query

Hi,
How to use the fields defined in the text table (/BI0/TCOSTCENTER) of 0costcenter. I want to be able to include them as fields in the query I am configuring and I don't see them available for choose from in the Query Designer. The cube that I am using is CO-OM-CCA(cost and allocation), standard cube from the business content. Do I need to include them separately in the dimension of the cube first to be able to use them in the report? The fields that I want to use are DATETO, DATEFROM, CO_AREA and COSCENTER. I assume description is already available in the display tab of the query designer tool.
Thanks,
Sharon

Hi,
In the Query designer, select the characteristics Cost center in the Rows/ Columns tab.
On the display properties tab there are display options available,
1. Key - Will display cost center number only
2. Key and Text - Will display the CC number and the associated text.
Selecting the second option will solve your problem.
Also check for the same in Business Explorer Tab of the info object.
Regards,
Shyam.

Flagged photos don't appear in flagged Library

I recently created a few new projects (photos imported from cameras) and notice that flaggd photos in these projects don't appear in the "flagged" library as they normally do. This has been working OK so far, on new projects as well as ones imported from iPhoto. Any ideas? I don't think I have done anything different in previous imports, but obviously, something is not the same...
Thanks,
Gali

Perhaps you accidentally toggled the the flagged yes/no button in the filter HUD and set it to "no" or set any other search that excludes the new projects from the flagged list?
BTW: The flagged check box is set from the Filter HUD button (with a magnifying glass icon) beside the search field in the Browser (or press Command-F).

Don't appear a field in a query

Similar Messages

Maybe you are looking for