"Done, but with errors on the page" message

I get this error message in IE7 and 8 on my home page. It's caused by the embedded SWF in the banner, as when I delete the SWF I no longer get the message. IE7 says "Object doesn't support this action" and "Object doesn't support this property or method." Are there newer tags produced in newer versions of Flash (I'm using CS3) that I can replace these with?

Do you have a link to a page that has this error?

Similar Messages

WAD error: done , but with errors on page!

Hi,
when i try to display query on web, it is displaying a partial report with almost no data on the page and right at the bottom i could see the message
"Done, but with errors on page"
what can be done to remove this error?
Thanks,
Ravi

hi Ravi,
try to click the error message, see if it will pop up more detail message.
as mentioned, seems you use some javascript in your web template,
see the detail message and check your javascript code,
it can be object not define etc, please note that it's case sensitive,
so e.g if you use object/variable or call function, check it's exactly same.
hope this helps.

Done, but with errors on page.?

Hi there,
I was wondering if someone can help me?.
I built a site http://www.pawsofeskbank.co.uk/ i had problems with the "£", every time i used the £ it came up with "Ã" i replaced the "£" with "£" this worked great, but now when up open the site at the bottom of the browser it says "Done, but with errors on page.?". I open the details and it says "invalid Charter" line 80 and so on but i have no idea how i get ride of this???
Can anyone point me in the right direction, Cheers

Cheers mate,
Much appreciated, its been driving me nuts for a week…is there any way I could spot that sort of thing if it happens again?
Cheers

Error messages: "Done, but with errors on page" and "Error on page" on the Verizon log-in page.

How do I remove/correct the page errors above? The error msgs only appear on the VZ web site log-in page.

Those are typically from what I presume you're using is Internet Explorer not liking the way some of the code is formatted on the website. They can be ignored if you are not having issues with the site. Each browser will complain about something and call it an Error in some way or another. You have to have an extremely basic page to not have a complaint about an error, or one crafted for every web browser out there.
========
The first to bring me 1Gbps Fiber for $30/m wins!

HT5037 my iphoto won't open it keeps saying to download iphoto upgrader which I have done but it still gives the same message. help

I went to iphoto 11 to get upgrader. but nothing changed.

Have you run it? You have to download and run it
LN

Get message "loaded with errors on the target and was closed" but there are no errors in the vi.

Hi,
Attached image shows the error message which i receive when I try to run my vi. "vi loaded with errors on the target and was closed"
The vi has no errors as far as I can see and hasn't changed since I ran it a few days ago and it functioned fine. other vi's in the project run without any issue.
Any guidance to find the issue would be greatly appreciated!
Thanks,
Conor
Attachments:
Labview error.JPG ‏43 KB

Some tips:
1. Try to recompile the VI which is "loaded broken" (ctrl+click on Run arrow). Deploy.
2. Try to recompile this VI and its dependencies (ctrl+shift+click on Run arrow). Deploy.
3. Try to recompile top-level VI and its dependencies. Deploy.
4. Change something in "loaded broken" VI (add some code, like reversing array back and forth, just to make LV recompile it). Deploy.
5. Close the project. Restart RIO. Open project. Deploy.
6. Close LabVIEW. Restart computer. Restart RIO. Open project. Deploy.
7. Take another computer. Deploy from it.
8. Close project. Clear compiled object cache (menu Tools -> Advanced -> Clear compiled object cache...). Open project. Wait until LV will open/recompile it. Deploy.
9. Do as 7, but in the meantime reformat RIO from MAX. Open project. Deploy.
10. Contact NI Support. Send them your project. Make them Deploy it.
The fun starts when you have project which deploys for 30 minutes... Usually I skip straight to step 8 then, and usually it helps.

So I was updating my boyfriend's iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have ev

So I was updating iPAD and while updating it stopped and gave me a typical error message but with error 4013. It worked fine before and is now stuck in the "connect to itunes mode" recovery mode. I have tried updating and no luck. I have even tried updating in DFU mode and no luck. Anyone git any solutions

Are you following these instructions?
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

I've just downloaded facetime and every tie I attempt to open it I get the message"there was a problem with facetime you need to quit and reopen facetime" I've tried this but I just get the same message again and again

i've just downloaded facetime and every tie I attempt to open it I get the message"there was a problem with facetime you need to quit and reopen facetime" I've tried this but I just get the same message again and again

Hello tadom,
Thanks for the question. The following article outlines the exact error message you described, and a potential resolution:
OS X: "An internal FaceTime error occurred" alert after clicking Facetime icon in the Dock
http://support.apple.com/kb/TS4457
Thanks,
Matt M

Hi..I purchased a Pantum p2000 printer and I cannot use it. It gives me an error ( Stopped, Filter failure) I tried to re-install the driver several times but I still get the same message. I'm using OS X Yosemite 10.10.1

Hi..I purchased a Pantum p2000 printer and I cannot use it. It gives me an error ( Stopped, Filter failure) I tried to re-install the driver several times but I still get the same message. I'm using OS X Yosemite 10.10.1

If you haven't done so already, try resetting the printing system.
OS X Mavericks: Reset the printing system also Yosemite

Error message "There was an error processing the page.there was a problem reading this document(109)

Getting an error message when viewing the pdf report by using Adobe reader "There was an error processing the page.there was a problem reading this document(109)"

Hi,
We are using Active reports tool to generate the PDF document, And the
server is Windows 2003, and it is online document which generates
dynamically
We are facing the below error message when we try to generate, and my
local machine having Adobe Reader 7.0
Please find the screen shot below for the error message, Thank you for you
help in advance.
Thanks and Regards
Inayath Nalgar

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

Hello there, Minig1501.
The following Knowledge Base article has some information on the message you're receiving:
Unable to use Apple Push Notification service (APNs)
http://support.apple.com/kb/TS4264
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Error #2057: The page could not be added to the print job.

I've been making myself crazy over this one. I'm trying to print a complex multi-page "report" in Flex, but I keep getting this error every time I try to call FlexPrintJob.addObject(page):
Error #2057: The page could not be added to the print job.
Here is the basic scenario... I have created a new control I call a PrintVBox that extends the normal VBox control. After adding all of the children properly to the component, I wait for an update event (so that the heights of all the components are calculated) and then I call a custom method I have added to PrintVBox that "paginates" the control.
This pagination method essentially decides how many of the items in the VBox can fix on each page, and splits them up into separate pages. Here's a somewhat graphic example of what happens:
(before paginate)
***** PrintVBox ********
     [ Item 1 ]
     [ Item 2 ]
     [ Item 3 ]
     [ Item 4 ]
     [ Item 5 ]
This single VBox with 5 items, after calling the paginate method becomes something like this:
(after paginate)
****** PrintVBox ********
     **** VBox (page1) ******
               [ Item 1 ]
               [ Item 2 ]
     **** VBox (page 2) ******
               [ Item 3 ]
               [ Item 4 ]
               [ Item 5 ]
So, what was once a single VBox with 5 UIComponents on it is now a VBox that contains two VBoxes, each the exact size of a printable page, one containing the first two items, the other containing the second two items.
In my example that I am working on, my PrintVBox that I have created uses a Repeater to create about 20 HBoxes on the page. I then call
myFlexPrintJob.start()
to show the print dialog and get the user's parameters. I then pass the chosen print height and width to the PrintVBox control and call the paginate method, which creates pages of the desired width/height. I have tested this part thoroughly and displayed the resulting PrintVBox on the screen and it paginates successfully and all is well. After paginate, it has created 3 page VBoxes each holding some of those 20 items.
I then iterate thru PrintVBox.getChildren() array, in this case which is the three VBox pages, and I call:
myFlexPrintJob.addObject(page);
for each one. Each one errors out with the above error. The error is down in the PrintJob code, which is part of the Flash framework and I cannot step through it. I have no indication of why the page can't be added to the print job. Is there a reason this is happening?? Does it have to do with the Repeater that originally created the 20 HBoxes, even though I have now moved those HBoxes down onto separate pages? I'm just so confused here.
I can probably post the entire code chunk if someone really wanted it. I'm currently testing it as an AIR application using a big tester XML data object on the repeater, so that I didn't need a database and such to create the control and test printing. If someone really wants to see what I'm doing, let me know.
HELP! PLEASE!!
Thanks,
Joe

Were you able to solve this problem?
I am currently having the same problem as yours... I created my own printing classes that do all crazy calculation to figure out page breaks and stuff... everything goes well until the point I want to add these pages to the printJob. I get same error?
Any help is highly appreciated.
Thanks,

TS3899 Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.

Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.
Here is an example....
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <CAM-_T=[email protected]> <BLU0 ,[email protected]> <CAM-_T=CAUP+9GyYG-_ecOazo=[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
> Mime-Version: 1.0 (1.0)
> In-Reply-To: <[email protected]>
> Content-Type: multipart/alternative;
> boundary=Apple-Mail-85351E4C-6385-4256-BE9E-27C10517E136
> Content-Transfer-Encoding: 7bit

It seems pretty clear to me.
When you turn off your primary account the only active account the phone can send via is your Gmail account, and that's what you're seeing.
The question is why do you need to turn off the primary account.. which you answer:
When that is set up as the primary server and turned on I get a message that says "the recipient was rejected by the server
That's because your ISP (megalink) is using access controls to manage who sends mail through their mail server. The first thing they're probably doing is using IP address restrictions - essentially saying they'll only relay mail from any machine on their network (including dialup/DSL/etc. customers), but you're not on their network, you're on an AT&T (or Verizon) 3G connection which isn't in their IP address range, and therefore not valid as far as their mail server is concerned.
The typical solution to this is authentication - by authenticating to their server (via username and password) you identify yourself as a customer and they should relay your messages. So check your phone to ensure that you have authentication enabled for your primary mail account.
If that fails (e.g. they don't support authenticated SMTP) the next option would be to relay the message through your cell provider's mail server - as an AT&T wireless customer you should be able to relay through AT&T's mail server... likewise for Verizon (or whatever national carrier your iPhone is on). You'll need to check with your carrier's site for the specifics of the mail server address to use.

Backups failing with error 19: the backup disk could not be resolved, or there was a problem mounting it

Hello all,
Doubt this issue relates to a recent and ugly issue but sharing anyways (resolved thanks to a user here: LaPastenague)
Time Capsule won't backup if Modem (Motorola SB6121) attached
This was on Feb 10th resolved. Few days later I upgraded to Yosemite. Backups were working fine since.
Yesterday I happen to notice my last backup was 5 days ago. I looked in the console logs and saw:
2/25/15 3:55:06.127 PM com.apple.backupd[2777]: Attempting to mount network destination URL: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.778 PM com.apple.backupd[2777]: NAConnectToServerSync failed with error: 2 (No such file or directory) for url: afp://Paul;AUTH=SRP@Time%20Capsule._afpovertcp._tcp.local./Data
2/25/15 3:55:17.792 PM com.apple.backupd[2777]: Backup failed with error 19: The backup disk could not be resolved, or there was a problem mounting it.
2/25/15 3:57:18.808 PM com.apple.prefs.backup.remoteservice[2021]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
I called Apple. Their front line was clueless. He suggested resetting the TC (latest "tower" model btw") which then a backup kicked off YEAH
But the next hour it failed
Called Apple again, this time to Sr Advisor. He suggested factory reset of the TC and set up again. Also first backup worked then rest failed
Third call to Apple useless also. He was asking questions I didn't feel relevant. He also was asking me to reset the TC which I told him was done 2 hours prior. He asked me to reboot which I could NOT at that time.
I begged him to collect data to submit to engineering, which will take days to get a reply.
So I thought I would throw this out to the community....
TC Is NEW (replaced from last issue). Mac is 8 months old (iMac 27"), Os is Yosemite, TC also new (latest model)
Thanks...

Yosemite is problematic on two fronts.. Networking and Time Machine.. so the combo of doing both with a Time Capsule is like bugs on bugs.
Here is my standard list.. but your problem maybe difficult to resolve.. and my suggestion is simple.. until Apple get their act together and fix TM.. buy Carbon Copy Cloner and use that for your backup. It is solid and reliable.. even better if you use USB drive plugged into the computer and do a bootable clone.. because then you have a backup that is able to be tested for full functionality 2min after the end of the backup.
This also starts from a factory reset.. but the reason for it is to change the configuration which is much more easily handled with factory reset to begin.. the instructions are there.. because this is my standard reply.. this is not uncommon!!
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the Mac itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. What I list here is good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

What error on the page validation?

when I run a page validation,
with the tutorial on
http://www.oracle.com/technology/obe/obe_as_1012/j2ee/develop/client/strutsvalidator/validator.htm#t2s2
but after I run the page I just get url below can not open any more page
http://192.168.1.70:8988/StrutsValidator-ViewController-context-root/proceed.do;jsessionid=c0a80146231c56224b01a0bb48828bf2ecee7a2f81fb
what is problem on this?
thanks

Rameshkumar palaniappan wrote:
Hi,
I am getting following error on the screen
this is happening on the live application and after a 10 days of use.
com.bea.p13n.usermgmt.UserManagementException: java.sql.SQLException:IO exception: Connection reset by beer
what could be the resion and what is the solutionHi. This exception is typically caused by the DBMS or network killing the socket
connection between the JDBC driver and the DBMS. Do you have your pool set to
test connections during reserve? If your application opens, uses, and closes
connections then that pool setting should make the problem go away. However,
if your application obtains a connection and holds it indefinitely, we can't
interrupt or replace a connection while you're still using it, so the solution
is to catch any unexpected failure, close and replace the connection and statement,
and retry.
Joe

"Done, but with errors on the page" message

Similar Messages

Maybe you are looking for