Get message "loaded with errors on the target and was closed" but there are no errors in the vi.

Hi,
Attached image shows the error message which i receive when I try to run my vi. "vi loaded with errors on the target and was closed"
The vi has no errors as far as I can see and hasn't changed since I ran it a few days ago and it functioned fine. other vi's in the project run without any issue.
Any guidance to find the issue would be greatly appreciated!
Thanks,
Conor
Attachments:
Labview error.JPG ‏43 KB

Some tips:
1. Try to recompile the VI which is "loaded broken" (ctrl+click on Run arrow). Deploy.
2. Try to recompile this VI and its dependencies (ctrl+shift+click on Run arrow). Deploy.
3. Try to recompile top-level VI and its dependencies. Deploy.
4. Change something in "loaded broken" VI (add some code, like reversing array back and forth, just to make LV recompile it). Deploy.
5. Close the project. Restart RIO. Open project. Deploy.
6. Close LabVIEW. Restart computer. Restart RIO. Open project. Deploy.
7. Take another computer. Deploy from it.
8. Close project. Clear compiled object cache (menu Tools -> Advanced -> Clear compiled object cache...). Open project. Wait until LV will open/recompile it. Deploy.
9. Do as 7, but in the meantime reformat RIO from MAX. Open project. Deploy.
10. Contact NI Support. Send them your project. Make them Deploy it.
The fun starts when you have project which deploys for 30 minutes... Usually I skip straight to step 8 then, and usually it helps.

Similar Messages

I get message "Spooler Sub System APP stopped working and was closed

Print spooler not working and was closed

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

.vi loaded with errors on the target and was closed

When I intend to run my RT (communicating with an FPGA on a cRIO) it only runs one time. The second trial leads to the following error:
NI_AALBase.lvlibine Wave.vi loaded with errors on the target and was closed.
LabVIEW: Failed to load shared library lvanlys.*ineWaveCIN:C on RT target device.
After reseting the FPGA and Labview it runs again, but also only for one time.
Thanks for solutions!
Thomas Vogl

Error 'found'.
Process (one day working on it!):
1- 'Disabled' .vi cutting it into small pieces.
2- Locate code that provokes 'not defined error' by enabling and running.
3- Finally located.
My case:
I've designed a communication system. To send data uses a PDU containing a 'variant' and 'ring'. This ring indicates type of data to convert variant with necessary typedef. The system defines 4 default msgs on ring (NULL, ACK, NACK, PING).
The receptor works well, but as I have a lot of data types, I need a case structure. (rings do not work with case at least on 2011) Then I do next thing:
Explicit cast to a typedef enum with all my data values... (This system is designed for our purposes and could not be the better solution)
... UNDEFINED ERROR ON PXI ...
Solution:
Instead using explicit typecast use "coercion dot" casting. Like here.
I receive an U16 data that PXI cast to my enum on 'data out' indicator (you can't see coercion dot because pink and red are 'very different' colors)
No more errors.
Conclusions:
Labview has issues working with explicit type-casting to enums. I can't work more on it, but is necessary to debug this kind of issues because can affect projects at last steps of the development and drives LVdevelopers crazy.
The only think I do with the enumeration is to add new element and all the system fails...
Thank you for your reply Schmitz!
I hope that this information could help somebody that in the future needs to investigate how LV works... xD
Probably this is not the only issue related with ".vi loaded with errors on the target" (known as the "well defined error").
Cheers

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

While using my Iphone 5, all of a sudden black and white stripes where on the screen. I have tryed to turn the phone off and on again, but there are only the stripes. I can't use it, and nothing happens when I push the buttons. Can someone help me?

Try resetting your phone, hold the home and sleep/wake button down until the apple symbol comes up, then release. If that doesnt work, you may have damaged your phone and need to take it to an apple genius bar.

I have uninstalled Adobe app, and Mac keeper, but there are still both two icon of them at the top the screen, does that mean I didn't uninstall them completely ? Anybody could help ?

i have uninstalled Adobe app, and Mac keeper, but there are still both two icon of them at the top the screen, does that mean I didn't uninstall them completely ? Anybody could help ?

See here for General Info > Uninstalling applications
And see here for...
MacKeeper have recently said that the uninstaller from here:
http://applehelpwriter.wordpress.com/2011/09/21/how-to-uninstall-mackeeper-malwa re/
now works
From Here > https://discussions.apple.com/docs/DOC-3036

I keep getting an error message "spooler Sub System App stopped working and was closed"

hp photosmart c3150 all-in-one
windows vista 32-bit
"spooler Sub System App stopped working and was closed"
not sure of any changes. I did reinstall the printer 3 times

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

With Firefox 5.0.1 and Firefox 6 beta there are display problems apparently due to Java and some Javascript compatibility problems -- there were links to solutions, but they are no longer active. What to do?

The box and button lines are not displayed or are mis-sized, if they appear at all; problem varies with the website and page style.
The threads I found in discussions mentioned a couple pages that are no longer active/cannot be opened -- so these solutions don't work.
When starting version 5x and 6beta I get information certain add-ons are STILL incompatible with these versions?
Are there any work-arounds or patches?

I am having this problem too. Just like WinOnBatch the problem started for me around firefox 5.0.1.
I have not been able to get rid of this problem. I have tried creating a new profile, restarting firefox in safe mode. disabling extensions 1 by 1. When I built this computer I did a clean install of firefox 5.0.1, and 2 weeks later with no extensions the problems came back. At that point I had the Java and flash plugins only.
When firefox 6 was released I did another fresh install (uninstalled firefox, went through my hard disc and deleted any reference to firefox and mozilla. Did the same in the registry, then run a registry cleaner and restarted the computer) before I installed firefox 6 and the problem was happening in less than a week. The I said to hell with it and re-created my entire profile from scratch and installed all my old extensions (updated them off course). 2 weeks ago it got really sever and I couldn't see any buttons on the chome interface and all web pages I visited were displaying really messed up. The only way i can describe it is kinda like greentech70 screenshots but on every inch of the application window. Like a really bad screen tearing effect.
The only thing that seem to help is when I downgraded to firefox 3.6.18. That fixed it but like greentech70 I have security and privacy concerns, so upgraded to firefox 6 again as the issue went away for 1 day, then came back but not as severe. since then I have been downgrading to firefox 3.6.18 re-installing java and flash, then upgrading back to firefox 6. It keeps the problem minimised but im still plagued by it. I also wonder if its a problem with firefox's 6 graphical engine.

IMAQ setup pattern matching 2 loaded with errors on the target and was closed

Hi , guys. has any of you nice people ever seen something like that ... in deployment progress?
labview 2010
sbRIO -9631
Thanks in advance.
Attachments:
deployment progress.jpg ‏43 KB

Hi, Oli
thanks for your help. I re-installed the IMAQ software, it seems working.
but i have some similar errors now, and i dont know which module i should re-install, could you tell me where the problem is, please.
the name of which module would be great.
thanks a lot.
Attachments:
0.jpg ‏55 KB
1.jpg ‏52 KB
2.jpg ‏52 KB

Lost the security question and safety email, but there are 3000Yen in the acc, How can I get it back or how to reset the question?

I can't remember the answers of my security questions and i lost my safety email as well. Unfortunately, I just add 3000YEN into the acc. How can I reset the security questions? or how can I get that 3000YEN back ? anyone can me with this situation T.T

You won't be able to view and/or change your rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to view and/or change your rescue email address for potential future use : http://support.apple.com/kb/HT5312

Cannot attach files to email. get message "An internal error occurred when attempting to attach... " when do retry and "switch" can attach the file. What is the problem? Files attach ok with IE.

Cannot attach files to email. get message "An internal error occurred when attempting to attach... " Have tried attaching docs and jpg. Same result , files don't attach. When click on try again and then "switch" the file does attach.

Cannot attach files to email. get message "An internal error occurred when attempting to attach... " Have tried attaching docs and jpg. Same result , files don't attach. When click on try again and then "switch" the file does attach.

My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

My MX892 is clicking and can not draw paper - I get a load paper error message - any suggestions?

Hi keciakh,
To try and get the paper to feed, with a flashlight or other bright light, please check the paper feed area of the printer and verify that there are no paper jams or obstructions in the printer that may be causing the error. Once this has been done, please look inside of the printer where the inks are located and ensure that there are no obstructions in there that may be causing the print head not to move freely. Next, please remove and reseat all of the ink tanks in the printer. Once all of these steps have been performed, please follow the steps below to perform a roller cleaning on the printer:
You need to prepare: three sheets of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Open the paper output tray gently.
3. Select Roller cleaning.
(1) Press the MENU button.
(2) Select Setup, then press the OK button. The setup menu screen will appear.
(3) Select Maintenance, then press the OK button. The Maintenance screen will appear.
(4) Select Roller cleaning, then press the OK button.
The confirmation screen will appear.
(5) Select Yes, then press the OK button.
(6) Select the paper source to clean (Rear tray or Cassette), then press the OK button.
4. Clean the paper feed roller without paper.
(1) Follow the message to remove any paper from the paper source you selected in (6) of step 3.
(2) Press the OK button. The paper feed roller will rotate as it is cleaned.
5. Clean the paper feed roller with paper.
(1) Make sure that the paper feed roller has stopped rotating, then follow the message to load three or more sheets of A4 or Letter-sized plain paper in the paper source you selected in (6) of step 3.
(2) Press the OK button. The machine starts cleaning. The cleaning will be complete when the paper is ejected.
(3) When the completion message appears, press the OK button. The screen will return to the Maintenance screen.
Reference
To access other available functions, use the mode buttons or the MENU button.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

There are text messages that I'm having trouble deleting. With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!

There are text messages that I'm having trouble deleting. With some of my text messages, I can swipe to the left and delete ... or press and hold, get more and delete to trash can icon. But there are some where neither will work. Can't delete. Help!

But once again, I do not want to lose my other texts, app progress, and photos. I could sync the photos but i would still lose the app progress and texts. I would only restore if it was the only option left, but the other space, as already stated, isnt the main concern. The main concern is those 'deleted' texts. If they go, then a good size chunk of the other space goes. I know you CAN delete texts for good. It worked fine before. All i want to know is why its not working for me now, and how to fix it.
I also know that when you delete texts on your iphone, they get marked for deletion, however they stay on your device (thats why they show up when you search for them.) then when you sync your device with itunes, the texts marked for deletion should disappear. When i synced they didnt disappear. Thats what i need an explanation/solution for. Why the texts marked for deletion didnt get fully deleted after the sync.

Not getting email on MAcBook Pro, but receiving on iPhone. Getting message "Warning Recent errors logged" It repeatedly states "The Header From: address postoffice is not authorised - please go to control add PHP" But I only have 1 email address.

I am suddenly not getting email on my MacBook Pro, but am receiving e-mail on my iPhone. I'm getting message "Warning Recent errors logged" It repeatedly states "The Header From: address <postoffice> is not authorised - please go to control add PHP" But I only have 1 email address. I'm afraid to add anything on since I don't even know what this other e-mail address is. What should I do? And would this definitely be the cause of my not receiving e-mail?

I pressed check again and here is what appeared:
CONNECTED Apr 04 19:03:02.511 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
CONNECTED Apr 04 19:03:02.513 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
CONNECTED Apr 04 19:03:02.526 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
READ Apr 04 19:03:02.556 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK <[email protected]>
READ Apr 04 19:03:02.563 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
220 mail.hostingplatform.com ESMTP
WROTE Apr 04 19:03:02.566 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
CAPA
CONNECTED Apr 04 19:03:02.568 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
READ Apr 04 19:03:02.572 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
220 mail.hostingplatform.com ESMTP
WROTE Apr 04 19:03:02.585 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
EHLO 192.168.1.4
WROTE Apr 04 19:03:02.592 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
EHLO 192.168.1.4
READ Apr 04 19:03:02.610 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
-ERR authorization first
WROTE Apr 04 19:03:02.628 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
USER [email protected]
READ Apr 04 19:03:02.630 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
250-mail.hostingplatform.com
250-STARTTLS
250-PIPELINING
250-8BITMIME
250-SIZE 65000000
250 AUTH LOGIN PLAIN CRAM-MD5
READ Apr 04 19:03:02.639 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
250-mail.hostingplatform.com
250-STARTTLS
250-PIPELINING
250-8BITMIME
250-SIZE 65000000
250 AUTH LOGIN PLAIN CRAM-MD5
WROTE Apr 04 19:03:02.648 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
AUTH PLAIN (*** 44 bytes hidden ***)
WROTE Apr 04 19:03:02.667 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
AUTH PLAIN
READ Apr 04 19:03:02.670 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
220 mail.authsmtp.com ESMTP Sendmail 8.14.2/8.14.2/; Fri, 5 Apr 2013 00:03:02 +0100 (BST)
READ Apr 04 19:03:02.671 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK
WROTE Apr 04 19:03:02.691 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
PASS ************
WROTE Apr 04 19:03:02.698 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
EHLO 192.168.1.4
READ Apr 04 19:03:02.704 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
235 ok, go ahead (#2.0.0)
READ Apr 04 19:03:02.712 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
334
WROTE Apr 04 19:03:02.734 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:587 -- socket:0x1164f4730 -- thread:0x114a5a030
QUIT
WROTE Apr 04 19:03:02.756 [kCFStreamSocketSecurityLevelNone] -- host:smtp.elikann.com -- port:2525 -- socket:0x11444a6a0 -- thread:0x11827f160
QUIT
READ Apr 04 19:03:02.759 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK
WROTE Apr 04 19:03:02.776 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
QUIT
READ Apr 04 19:03:02.799 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
250-mail.authsmtp.com Hello pool-72-93-40-57.bstnma.east.verizon.net [72.93.40.57], pleased to meet you
250-ENHANCEDSTATUSCODES
250-PIPELINING
250-8BITMIME
250-SIZE 52428800
250-AUTH CRAM-MD5 DIGEST-MD5 LOGIN PLAIN
250-STARTTLS
250 HELP
WROTE Apr 04 19:03:02.808 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
AUTH PLAIN ********************
READ Apr 04 19:03:02.822 [kCFStreamSocketSecurityLevelNone] -- host:mail.elikann.com -- port:110 -- socket:0x118296830 -- thread:0x10121d6c0
+OK
READ Apr 04 19:03:02.907 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
235 2.0.0 OK Authenticated
WROTE Apr 04 19:03:02.917 [kCFStreamSocketSecurityLevelNone] -- host:mail.authsmtp.com -- port:2525 -- socket:0x11824ca00 -- thread:0x1176c1ab0
QUIT

Windows server 2012 Data Center with VDI configuration error message ( The remote session was disconnected because there are no remote desktop license servers available)

Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.

Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support

Windows Server 2012 Used: Error Message from Windows 7 PC: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator.

We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.

Hotfix Released here:
http://support.microsoft.com/kb/2916846

Get message "loaded with errors on the target and was closed" but there are no errors in the vi.

Similar Messages

Maybe you are looking for