DOS Window automaticly close after execute the batch file and start the App

Hi, all. I have made a batch file. When I start the batch file, thet is getting open the DOS Window. But I want close the DOS Window after Start the Application, or make it hidden?
It is possible?
Thanks all:-)
Nikolay

Hi,my batch file is:
java -cp File.jar Desktop
I have tryaed with:
javaw -cp File.jar Desktop , but it dosn�t close the DOS Window.
Have I make anythink false?
Thanks.
Nikolay

Similar Messages

  • I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    I am trying to install software for iTwin Connect, but after downloading the dmg file and launching the program, I receive a message saying the file can't open and to check my internet connection.  Any ideas?

    Many Thanks, Kurt.
    I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
    I shall save it somewhere VERY safe now in case this happens again …
    You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
    Best wishes
    OllyanDinah

  • I have recently changed to an iMac from a Windows PC. How do I delete files and format the memory card in my helmet cam?

    I have recently changed to an iMac from a Windows PC. How do I delete files and reformat the memory card in my helmetcam?

    If you return the memory card to the helmetcam, it may choose to reformat it before use; back to some FAT-16 or FAT-32 format many of these third-party cards and cameras use. Unless you were going to use it for Mac OS X and format it with HFS+ or in a partition map for Mac data, etc.
    If not, the easiest way to reformat the card may have been in the camera itself. I've formatted several kinds of camera cards, drives, USB flash drive, and others. The means varies with the intended purpose. Sometimes the default is the best; since it is platform neutral if the device is seen by both players.
    Good luck & happy computing!

  • I want to add hyperlink in the illustrator file and want the output in the PDF

    I want to add hyperlinks in the illustrator file and want the output in the PDF.
    I tried to add the multiple hyperlinks on the text and images in the illustrator by using the attribute panel but the links are not working in the published PDF.
    Is there is any other method to create a hyperlink in the illustrator?
    Can anybody help me out in this
    Thanks

    Interesting, Carlos.
    There's another method by JET: Re: hyperlinks in Ai

  • How we can create the batch file to download the data in from URL in ssis

    hi,
    any one help on one the below requirement.
    i have to create one batch file to download the report(reports is in csv format) from URL...
    requirement should be like this...
    1. we have some reports is there in the URL..
    2.when ever we execute the url, the report should be download and save it to the local folder.
    3. this requirement i have to write in the batch file
    should any one let me know how we can create the batch file for the above requirement.

    Hi Priya.N,
    If you use SQL Server Reporting Services for reporting, you can use Visakh’s suggestion to create a script file which calls Reporting Services Web Service to render a report in CSV format and save a batch file to the destination folder, and then create a
    batch file to run the rs.exe utility which can executes the .rss script file. For more information, please see:
    Report Server Web Service
    ReportExecutionService.Render Method
    rs Utility (rs.exe) (SSRS)
    If you use other reporting tools, it depends on the reporting functionality and this requirement may be not achieved.
    Regards,
    Mike Yin
    TechNet Community Support

  • I want to change serial number in the Batch report and in the special UUT report

    I use Batch Model, sequential mode.
    I want to change serial number in the Batch report and I want to change UUT serial number in each TestSocket report.
    I overrided ModifyReportHeader, I did
    Parameters.UUT.SerialNumber = "....."
    but the serial number changed only in the Batch Report, not in UUT Report. How can I change serial number in UUT Report too?

    Marta,
    There is actually a ModifyBatchReportHeader in addition to the ModifyReportHeader that you already used.  That would be the first thing to do.
    After that, I think I need a more detailed description of what you are trying to do (perhaps with screenshots) in order to be able to help effectively.
    Josh W. | National Instruments | Applications Engineering
    Josh W.
    Certified TestStand Architect
    Formerly blue

  • When I open iTunes on my new computer using the .itl file, and using the same external drive holding the songs, all of the songs I added to iTunes up to a certain date have broken links, while none of the songs have broken links on the old computer.

    I want to open the  iTunes library on my new laptop with all the playlists and stuff I built on the old computer. I have all my music on an external drive. I have copied the .itl file from the old computer and opened it on the laptop, and it has all the playlists, but all of the songs that were added to iTunes up to a certain date have broken links. What am I doing wrong?

    Moving library files around while leaving the data in the same place usually presents no problems. Moving the data around independently from the library usually breaks things. With Windows machines all you should need to do is make sure that the same drive letter is being used on the new system as with the old. If that is not possible you need to get your library into a portable layout before moving it between systems.
    Typical layout of iTunes folders:
    When the media folder is inside the main iTunes folder as shown above then the library is portable. Typically with a split library the iTunes Music or iTunes Media folder (everything inside the red outline) is moved to a different drive by choosing a new locaton for it and then consolidating.
    To make the library portable again you need to copy the library files and album artwork folder into the parent folder of the media folder so that the nested relationship is recreated. (BTW If your media isn't already inside your designated media folder then you will also need to consolidate the files that are outside of it, before you copy the library files.) You can then use the hold-down-shift-when-starting-iTunes method to open the library file in that parent folder. Once the library has been opened, tested and closed you are most of the way there.
    The iTunes window inherits its title from the folder holding the library files so, unless you created a folder called iTunes to hold the media folder, iTunes may now have an unexpected title when you run it. The parent folder can be renamed as iTunes, and the library opened again. Alternatively, if the parent folder is at the root of the drive, or has other data which you wish to leave in place, you can create a new top level folder called iTunes and move the library files, album artwork and media folders into it before opening and testing the library again.
    If the library doesn't work after any step simply reverse it by undoing a move or rename or opening the previous set iTunes Library.itl file.
    If all has gone well then the library is now portable. Once you've migrated the data to a new system you can copy the library files back to their usual internal location if you find that having them on the external drive affects performance...
    tt2

  • I deleted the preview files and now the sequence on the timeline is missing

    I deleted the preview files to save disk space by doing Sequence/ delete render files, now the sequence on the timeline window is missing. what can i do te recover the already assembled sequence on the timeline?
    Help please!!!
    Elio

    First, are you sure that you deleted the Preview files, and not your media files? Can you check in Windows Explorer, that your media files are still where you had them?
    Next, if it was the former, and not the latter, this should not happen. Did PrPro give you any sort of message, when you loaded your Project? Something like "where is file xxxx.AVI?"
    There are instances where Sequence Timelines do not appear in the Timeline Panel. I'd not think that this would be one of those instances, but... is your Sequence still showing in the Project Panel? What happens if you Dbl-click on it there?
    Do start checking the sales for hard drives. Editing video without enough hard drive real estate is asking for problems. It will be money well-spent.
    Good luck,
    Hunt

  • How can i read the text files and buffer the data in Vector?

    hi. I have been running into this problem for days, but with no luck and losing right direction.
    The problem is : I am trying to read a text file and buffer the data into a
    Queue for each user.
    the sample text file is as below:( 1st column is timestamp, 2nd is user_id, 3rd is packet_id, 4th is packet_seqno, 5th is packet_size)
    0 1 1 1 512
    1 2 1 2 512
    2 3 1 3 512
    3 4 1 4 512
    4 5 1 5 512
    5 6 1 6 512
    6 7 1 7 512
    7 8 1 8 512
    8 9 1 9 512
    9 10 1 10 512
    10 1 2 11 512
    11 2 2 12 512
    12 3 2 13 512
    13 4 2 14 512
    14 5 2 15 512
    15 6 2 16 512
    16 7 2 17 512
    17 8 2 18 512
    18 9 2 19 512
    19 10 2 20 512
    20 1 3 21 512
    21 2 3 22 512
    22 3 3 23 512
    23 4 3 24 512
    24 5 3 25 512
    25 6 3 26 512
    26 7 3 27 512
    27 8 3 28 512
    28 9 3 29 512
    29 10 3 30 512
    30 1 4 31 512
    31 2 4 32 512
    32 3 4 33 512
    33 4 4 34 512
    34 5 4 35 512
    35 6 4 36 512
    36 7 4 37 512
    37 8 4 38 512
    38 9 4 39 512
    39 10 4 40 512
    40 1 5 41 512
    41 2 5 42 512
    42 3 5 43 512
    43 4 5 44 512
    44 5 5 45 512
    45 6 5 46 512
    46 7 5 47 512
    47 8 5 48 512
    48 9 5 49 512
    49 10 5 50 512
    50 1 6 51 512
    51 2 6 52 512
    52 3 6 53 512
    53 4 6 54 512
    54 5 6 55 512
    55 6 6 56 512
    56 7 6 57 512
    57 8 6 58 512
    58 9 6 59 512
    59 10 6 60 512
    60 1 7 61 512
    61 2 7 62 512
    62 3 7 63 512
    63 4 7 64 512
    64 5 7 65 512
    65 6 7 66 512
    66 7 7 67 512
    67 8 7 68 512
    68 9 7 69 512
    69 10 7 70 512
    70 1 8 71 512
    71 2 8 72 512
    What I wanna do is to read all the data above and buffer them in a queue for each user( there are only 10 users in total).
    I already created a class called Class packet:
    public class packet {
        private int timestamp;
        private int user_id;
        private int packet_id;
        private int packet_seqno;
        private int packet_size;
        /** Creates a new instance of packet */
        public packet(int timestamp,int user_id, int packet_id,int packet_seqno, int packet_size)
            this.timestamp = timestamp;
            this.user_id=user_id;
            this.packet_id=packet_id;
            this.packet_seqno=packet_seqno;
            this.packet_size=packet_size;
    }then I wanna to create another Class called Class user which I can create a queue for each user (10 users in total) to store type packet information. the queue for each user will be in the order by timestamp.
    any idea and sample code will be appreciated.

    Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
    Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

  • How to read the source file and copy the entire content to the target Database field

    Hi All,
    PI system extracts the actual business content from the incoming attachment file and copy the entire format to the target Database field which is a blob data type field.
    Sender Adapter: SOAP
    Receiver Adapter: JDBC
    JDBC Structure
    Can we achived the above requirement by using UDF with out Java Mapping?
    Thanks,
    Mahi.

    Ok, in this case yo can use the conten converion of the file adapter. Therefore you first need to create a Datatype in ESR with the required structure
    Then in your file adapter you need to use this datatype and its required fields:
    The Datatype then can be used as usual within you mapping.
    regards
    Christian

  • To add the JNI dll to the jar file and use the dll inside the jar file

    Hi to everybody,
    I am new to java.
    I want to add the JNI dll to the jar file and use it in the java class.
    How can I achieve it.
    Please help me.
    Thanks in advance.
    Regards,
    M.Sivadhas.

    can't be done because none of the known operating systems support reading binary libraries from .jar files ... you can add the binary to the jar but then you have to extract it...
    besides, mixing platform specific and platfrom independent components is not a very good idea, i'd keep the dll out of the jar to begin with

  • I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file  and  all the latest event files, can you help how to solve the problem? Thank you  Model Name iMac    Model Identifier:     iMa

    I have the following Imac and Iphoto 11 in Finder folder I upgrade the iphoto file  and I lost all the latest event files, can you help how to solve the problem? Thank you
    Model Name:     iMac
    Model Identifier:     iMac8,1   Processor Name:     Intel Core 2 Duo
    Processor Speed:     2.4 GHz

    http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

  • I'm just downloaded the creative cloud installer.  Double click on the install file, it starts the installation and after only a few seconds it stops and nothing happens.  What is going on?

    why does the cloud installer quit after only a few seconds of install?

    I am having the same problem. Sorry I don't know an answer but would love help too.
    I'm on a Mac - OSX10.9.3
    Downloaded installer which opened to the point that I had the icon in my toolbar but it seemed to get stuck at that point - about 7 hours of scrolling "update cycle" (swirly thing in middle of the empty CC window) but no App tab or other tabs - just a white rectangle with scrolling.
    So I tried un-installing, deleted all files, downloaded again but now I get the same as Scrapnick - installer launches with task bar at "Initializing Installer" which lasts only about 2 seconds, then flicks to "Dowloading Creative Cloud desktop" at which point the task bar & the installer window close.
    I hope someone can help us with this...

  • How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

    How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
    Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh  f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
    Thank you!

    Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
    Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

  • To upload the ZIP file and get the filenames available in ZIP file in ABAP

    Hi Experts,
    For my requirement, file from legacy comes as ZIP file with number of files in that.
    Please provide one code sample to upload the ZIP file from local workstation and get the filenames available in ZIP file to check few filename validation checks for the available files in report program.
    Thanks in Advance,
    Regards,
    Basani

    1. Copy the ZIP file into App server
    2. Call function
      call function 'RFC_REMOTE_PIPE'
        destination 'SERVER_EXEC'
        exporting
          command = command  " Unzip command gunzip /path & file
          read = 'X'
        tables
          pipedata = std_lines
    then you can read the files and can validate the file names
    a®

Maybe you are looking for