Dot11Radio0 and 1 are reseting every 30 seconds, if both are enabled

If I enable both radio interfaces on  new 892W with integrated access-point 801 the radio interfaces are reseting every 30 seconds. I have already tried different IOS version 12.x and 15.x on the router and the integrated ap. Also tried a a configuration from another 892W, which is working fine on the other router. Still same issue.
If I disable one of the interfaces, doesn't matter which, the access point ist working fine.
With both enabled log of the ap shows:
Mar  8 19:09:26.403 MEZ: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
Mar  8 19:09:27.583 MEZ: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
Mar  8 19:09:28.175 MEZ: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
Mar  8 19:09:28.203 MEZ: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
Mar  8 19:09:29.175 MEZ: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
Mar  8 19:09:29.383 MEZ: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
Mar  8 19:09:29.983 MEZ: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
Mar  8 19:09:30.983 MEZ: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Mar  8 19:10:05.035 MEZ: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
Mar  8 19:10:06.215 MEZ: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
Mar  8 19:10:06.807 MEZ: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
Anyone already seen?

Nope but I'm suspecting you have a faulty radio.

Similar Messages

  • Bought av adapter to watch iPad on tv.  Plugged it in iPad and received message not compatible.  Both are apple products.  Unable to view movies on tv from iPad.  I also used hdmi cable

    Bought av adapter to watch iPad on tv.  Plugged it in iPad and received message not compatible.  Both are apple products.  Unable to view movies on tv from iPad.  I also used hdmi cable

    Every consider an AppleTV for same? no cables, no fuss, LOTS of free content, very handy.

  • I bought 2 iPhone 5 and received on 17 Dec but both are with rattling noise like loosing parts then I ask for replacement but courier has not come as appointment. Now I still have the defective iPhone 5 with me though I have planned to give as Xmas gift

    I bought 2 iPhone 5 and received on 17 Dec but both are with rattling noise like loosing parts then I ask for replacement but courier has not come as appointment. Now I still have the defective iPhone 5 with me though I have planned to give as Xmas gift.

    I bought 2 iPhone 5 and received on 17 Dec but both are with rattling noise like loosing parts then I ask for replacement but courier has not come as appointment. Now I still have the defective iPhone 5 with me though I have planned to give as Xmas gift.

  • Why does my ipod touch 5th gen not charge when plugged into my computer? (it keeps stuttering(lightning symbol next to bettery goes on and off literally every second))

    so I have my ipod touch 5th gen connect and the little lightning symbol, next to the battery on the top left, keeps flashing on and off every second. I don't know what to do and also it doesn't show up on iTunes.

    Hey Ed, Try trouble shooting 101. Do you have a different cable and/or charging device? If so, try the different cable first, then a different charging device. If the problem goes away, I'd say it's the cable, replace it. If with in 1 from date of purchase, Apple will replace for free if the cable is found to be defective. If the problem continues with a different cable or a different charging device, then the problem is with your iPod. With a strong light and a magnifying glass look in the iPod's charging port. Your looking for damage in and around the port. Is the port lose? (shouldn't be). Are pieces missing or damaged? Bent or damaged contact pins can do what you describe. Foreign debris, namely pocket lint or corrosion can also cause charging issues. If you see something like lint, try to blow it out, or if you must use a non-conductive probe, I find a round wooden toothpick works well to carefully remove the lint from the bottom of the port. Just be careful to not touch, bend or damage the gold contact pins on the long side of the port. Also make sure the locking pins on the short ends (looks like two silver bumps, one on each end) of the port are free to move. If you find corrosion, try plugging / unplugging about 12 times to clean the contacts off. If you must use a cotton swab cut to fit, with a drop of 91% isopropyl alcohol on it, you want it damp, not wet, then plug it in and out until the swab comes out clean. You will most likely need several swabs. If you find nothing physically wrong, then try resetting your iPod. If that does not work, restore from backup, last resort, make a backup then restore to new, a full factory restore. If issue continues see your Apple store and have it evaluated for a possible hardware issue. But start with a different or new cable. Good luck, Cheers.

  • Hello. I have iPad mini with retina display(7.1.1)and iPhone 4s(7.1).they both are not able to discover each other via Bluetooth. Please someone help me!

    I am having an iPad mini with retina display(7.1.1)and iPhone 4s(7.1).they both could not discover through Bluetooth.

    That's normal.  BT does not support such a connection.

  • HT5517 How can i play apple tv and tango air at same time, both are on apple tv listing but i cannot play them both at same time?

    CAn anyone help me, speakers are both displayed on apple tv but cannot play both, appletv with speakers and a new tango air!

    hmmmm. i suspect you've already found this document:
    AirTunes: Error -3256 when streaming to multiple AirPort Express units
    perhaps also try working through the techniques from the following document to see if they are of any help with this:
    iTunes for Windows: Music Sharing with Windows Internet Connection Firewall

  • I have Firefox 4.0 Beta 6 on my system and Beta 9 was installed, now both are oon desktop neither show on Start menu and Add/Remove list only shows Beta 6 but will not remove it.

    Had a problem yesterday and Google chrome replaced Firefox as my default browser without my knowledge. I removed Chrome from my system and can use Firefox. I have two icons for Firefox on my quick launch toolbar one says Beta6 the other Beta9 but both launch Beta 9 but my Add/Remove programs shows only Beta6 and will not remove it. It seems Beta9 is the only version on my system but was not updated in my Start menu.

    If you updated from the beta 6 version to the beta 9 version then the beta 9 version has replaced the previous beta version. It can happen that the uninstall registry key of older versions isn't updated or removed and that seems to have happened in your case. So you have only the beta 9 version installed and an orphaned entry to uninstall the beta 6 version.
    If you are comfortable in editing the registry then you can remove that entry.Otherwise it is better to leave it.<br />
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Mozilla Firefox

  • Why does it take at least 3 hours to watch an Apple/iTunes movie, yet Netflix downloads in seconds?  Both are accessed through the same AppleTV device?

    I have owned my AppleTV for about 6 months, and it didn't take this long initially, what happened?  And it cannot be a download setting issue through my Airport since downloads from Netflix takes roughly 30 seconds.  Youtube about the same.  What is Apple doing?  MASSIVE PROBLEMS YET THEY ARE IGNORING THIS ISSUE ON THEIR SITE!  IS THIS A FAILED PRODUCT?  Should I buy a Roku?  I've heard they work much better.

    Netflix has variable quality streams - they get worse as internet bandwidth drops.  iTunes content is fixed quality/bitrate and enough has to download to enable uninterrupted playback as the end of the film downloads while you watch.
    AC

  • "My subscriptions" are reset every so often

    Hi
    I did a quick search on this forum for similar reported issues, and have found none, but I might not have been searching long enough...
    So, here is my problem: "My subscriptions" keep being reset. Every so often, I realize I haven't been receiving updates on the posts I subscribed to for a while, so I log in, only to see that I have no subscriptions anymore. They're all gone. I re-subscribe to a few topics, but this keeps repeating again and again.
    Thanks

    You're Welcome Allamistakeo!
    If you go to Your Subscriotions, you can check the boxes in the Save column, for the Topic subscriptions, that you do not want to be archived off.
    After you have select those, click on the Update tab.
    And Thank You, for extending the courtesy, of awarding in  Discussions, as this is not a requirement, nor mandatory, but is much appreciated!
    ali b

  • Iphone4, starts and stops charging every second.

    Hi,
    super frustrated here. I have an iPhone 4. I recently replaced the battery in an Apple store. for the first 2 weeks everything was fine, but recently everytime I plug it in to charge it vibrates twice to indicate that its charging then stops and starts again about every 1-2 seconds. I have taken it to apple so they could re seed the battery and clean out the ports and make sure its nothing on the wear and tear end but nothing works. and since my warrenty is out im out of luck in terms of a free swap. has anyone heard of this issue or any fixes? is it a hardware issue or could it be software? maybe a bad app install? any thing helps here. thanks
    Evan

    I checked today
    the battery started the charging loop at 99%, BUT (each time it re-started charging) there was 1 hour left for full charge.
    I hope somebody can help me

  • What is the difference between model number FC769LL/A and model number  MC769LL/A? Both are iPad 2 16g models.

    I Bought twomipads 2's and it seems they are supposed to have to same specs but it seems like the mc model is charging and running faster. I'm just curious why thenmedel number difference.

    The first one is a refurbished product or special order. They're otherwise exactly the same.
    (115784)

  • TS1503 How do I clear the 'other data' on my iPhone 4S? It is using 25% of the available memory.  I do not want to have to wipe it and then reset every thing I use.  That's why I have restore.  Except restore puts the other data back on the phone.

    I've come to the conclusion that Apple is no better than Microsoft.  There was a functional iTunes. I could sync music, playlists, etc; across my iPad and iPhone.  I can't now.  It now eats up storage on my devices with 'other data',  and Apple is silent on what is going on.   I currently have 2 iMacs, 2 iPads, a Macbook Pro, and an AirBook Pro.  I will stop purchasing Apple products.  It is a royal pain to fix anything.  This support page tries my patience to use.  I used to enjoy working with Apple products, simply because they functioned and where intuitive to use.  No more.  Music is impossible to sync across platforms using the same account.  Songs only, no playlists.  This is step back to the early year of systems.  No common data formats, zero portablity, and labor intensive. 
    Way to go Apple,  you've destroyed your reputation!

    Similar issue -- this is the third time in as many months that I've had to restore my iPad. It's a iPad Mini w/ 32GB (ME277LL/A), running the latest iOS8.1.2. The "other" data starts off about 1GB and will bob around that. I was careful about games this time, seeing only a slight rise in the data. Once it started to rise, I deleted all of the game and the data on Game Center. No joy -- the data stays about the same.
    Then I noticed it was really climbing -- shooting up to about 10GB and sitting there, no matter what I did: sync it: nothing. Deleting music (on the off chance it was album art or some such: nothing. Deleted all the books in iBooks: no effect -- still 10GB. Cleared the iCloud storage, cleared caches repeatedly: nothing. Reset everything: no effect. Only Restoring the iPad -- which takes forever and is a gigantic pain in the @$$ -- gets it down. This is exactly the same thing that happened the other two times -- I lose about 10GB to "other."
    I now suspect, thinking on what I was doing with the device, that pulling movies from iTunes seems to be the culprit. Deleting the movies might take the movie "off the iPad", but there seems to be a corresponding jump in Other. My guess is there's some glitch dumping the information elsewhere.
    It makes a 32GB iPad pretty frickin' close to useless in a remarkable amount of time. I've not had this issue until this iPad (bought last summer) with the iOS8 upgrade. I don't see this happen on the iPhone 5S with the same OS...that's why I dialed down to iTunes (when is it not smack in the middle of issues?) and Video as the culprit; I don't watch movies on the phone.
    I've noticed a massive amount of posts in support and around the web on this matter...it might be time for Apple to shift it and do something about the matter. If I'm going to be restricted to surfing the web, email, and little else thanks to the Other issue, it really doesn't make sense to stick with this device. I can doo all that on my laptop, can't it?

  • My new iPod Touch is iOS 6.0.1 but will not update to 6.1.3.  I have attempted the OTA and the iTunes update methods but both are not updating the iOS.  Am I doing something wrong?

    I meant to mention that it is a 16gb 4th gen iPod.

    Yup.  Some unknown error according to the message and an error code that does not list on the Apple support pages.  I am updated on Windows 7, iTunes, and have no other USB devices connected.  I tried to follow any other advice that Apple listed but nothing helped.  The OTA update acts like it is updating and even reboots the device but once it is fully booted, I check and it still says current version 6.0.1 and the check update still shows that 6.1.3 is available.  I am giving up and taking it back to Sam's where I bought it yesterday for a full refund.

  • How do I get a two line graph to show all the months in the data table and not just every second one?

    My two line graphs covers six months, but only shows three months How can I make it show all six months

    select the chart, then open the Chart Formatter:
    Then click "Axis", then "Category (X)"
    Change the "Label Angle" to "Left Vertical" or "Right Vertical"

  • Expdp from HPUX and them impdp in Windows.  Both database are 10204

    Hi,
    Can I do expdp from HPUX and then impdp to Windows. Both are running on 10.2.0.4. Please let me know if I need to what I need to specify in the expdp and impd to make this happen. Thank you in advance.

    if you set up a database link in the source HP-UX database to the target Windows database, you don't need to export the database and you can use
    impdp network_link=<name of the database link> see http://www.techrepublic.com/article/import-data-via-a-network-link-in-oracle-10g/6132883
    If you don't want to do that, yes, export is platform neutral. However if you use ftp to transfer the export from one database to another, this should be done in binary mode.
    Sybrand Bakker
    Senior Oracle DBA

Maybe you are looking for

  • Containers with abstract Interfaces in other Softwarecomponents

    Hi all, I just noticed that I can't reference an abstract interface in a BPM Container that is not in the same softwarecomponent as the process. That's a pity! Is there any trick to make it possible to do that?? I created one softwarecomponent for se

  • Foreach loop

    Hello, I am trying to convert a normal for loop to the new foreach loop. I was able to do one function that prints every element, but can't seem to be able to modify the elements in the array. //This works ok public static void printjoy(int [][] arra

  • IViews error : Copy of a Role

    HI gurus, I am new to EP. I created a copy (Role B) out of an existing custom role (Role A) which has a lot of workset and iviews in it. After a successful copy and ChangeID, I assigned roleB to a new test user. The Iviews of Role B when opened in th

  • Hp C7280 Printing on custom paper size & card template?

    Hello,  I have a Hp c7280 all-in-one connected to a laptop running vista. I am trying to print some greeting cards on card stock I ordered (5 1/4" x 10 1/2"). I can't seem to get this to work. The size does not seem to be available to select, but sur

  • Nice program if you can open it

    Just downloaded the trial version of Lightroom 3.6. 6 times now I have filled out the information and always end up back at the install or "read me" page. I'm not sure I want this program after all. If anyone has a way to open it, please let me know.