Doubt about Alerts Out-of-Band 2012 R2.
Hi All,
I´ll deploy Out-of-Band of SCCM 2012 R2. I have computers with v-PRO last version, a doubt if in SCCM alters painel can receive hardware issues. For exemple hard disk failed and so on.
regards.
SCCM is a Management tool and not a monitoring tool. Hard Drive failure for Servers can be found using SIM tools etc. You need to look at some tools from the OEM.
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"
Similar Messages
-
Doubt about Report Suite Office in SCCM 2012
Hi all,
I have a question about Suite Office in SCCM 2012.
Why in my report 07B - Computers that recently used a specified executable program
when I specific Office 2010 don't display nothing about Outlook?
Just display follows softwares: Word,Excel,PowerPoint,Visio and Project. Someone have idea?
Thanks.Do you have Software Metering enabled for that executable?
Mike Leach | http://blogs.catapultsystems.com/mleach/default.aspx
Mike Thank's your opinion...my answer....Yes, I do.My software metering is OK.
My doubt is why Microsoft Outlook don't display as being part suite Office?
Is necessary I select Microsoft Outlook (separately) for do my software metering but I think this is not correct, because the correct is suite Office contains: Word,Excel,Visio,Project,Powerpoint
and Outlook...
So when I selected Microsoft Office 2010 display all softwares as I saw in my first post and any about Outlook.
Thanks any suggestions. -
hi all,
Is possible with out of band receive alerts of hard disk problem or other hardware issues?
best regardsThis is the Virtual Machine Manager forum. In VMM, we basically just support OSD of Hyper-V hosts with corresponding configuration. For Configuration Manager, I strongly suggest that you raise this question in one of those forums to get the best help from
the experts over there.
Generally speaking. Regarding monitoring of the stack, Operations Manager is the key to detect any issues in your platform, no matter if it's hardware, networking or application related.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com ) -
Doubt about using automation testing in mtm and vs 2012
Hi
Ive a doubt in using mtm and vs 2012. I wanna test a software by automation method
1) whether i should record the steps in visual studio and attach the recorded file to mtm and test
or
2) can i record the script(steps) in mtm and run the automation testing in mtm, if you say yes what are the step.
Plz help me out for both 1 and 2 by tell the steps.
Thank you
Reguards
Pavan kumar RHi Pavan,
It is based on the detail requirement to choose them.
Do Coded UI test in visual studio 2012, we could record the action and playback, link tests to test case that in MTM, we also could base on the detail requirement to modify the code.
Do manual or automated test in MTM 2012, we also could record the action and playback, but can’t modify the code (need do it in vs), we could do automated tests in lab environment
# System Testing Your Application Using Microsoft Test Manager
http://msdn.microsoft.com/en-us/library/jj635157(v=vs.110).aspx
For the automated test in MTM, you could refer to these steps below:
Create tests
Check in TFS
Link test methods to test case
Queue a build
Create lab environment in mtm
Do automated test
More information, please refer to:
# Essential Guide for Running Automated Tests from a Test Plan
http://msdn.microsoft.com/en-us/library/ff472576(v=vs.110).aspx
If we record the action (script/steps) in the MTM, we could
playback the test, if we want do the automated test for that recording, we could generate the code in VS and link that test to the test case, after that we could do automated tests.
# Generating a Coded UI Test from an Existing Action Recording
http://msdn.microsoft.com/en-in/library/dd286652(v=vs.110).aspx
Regards
Starain
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
On the Client:
What BIOS or MEBx setting do I need preconfigure for Out Of Band Management in SCCM 2012?
Or can I remotly configure BIOS or MEBx settings from SCCM 2012 or Intel SCS?
/SaiTechThanks,
Now I see, with Intel SCS add-on for SCCM 2012 it will be the most simple solution. Even better than to have Intel scs standalone, that was an complex setup on dhcp and so on...
Just one thing more, When you configure AD for AMT you have to set a OU. but if you have computers in two ou, I cant see how I can configure that?
/SaiTech -
Question about creating Certificates for Out of Band management
I would like to use out of band management for supporting clients in remote offices. I am following the instructions at http://technet.microsoft.com/en-us/library/230dfec0-bddb-4429-a5db-30020e881f1e#BKMK_AMT2008_cm2012 in the "Deploying Certificates
for AMT" section. It says:
If you cannot complete steps 18 or 19, check that you are using the Enterprise Edition of Windows Server 2008. Although you can configure templates with Windows Server Standard Edition and Certificate Services, you cannot deploy certificates using modified
certificate templates unless you are using the Enterprise Edition of Windows Server 2008.
My Certificate Authority server is Server 2008R2 Standard. When I right click on Certificate Templates -> New -> Certificate Template to Issue, I do not see the ConfigMgr AMT Provisioning and ConfigMgr AMT Web Server Certificates. I know
the box says 2008 Standard isn't supported, but I am using 2008R2 Standard, not 2008. Why am I not able to see either certificate. If it is because I am using the Standard Edition, than how can I create the certificates needed? Upgrading
to Enterprise is not an available solution (cost reasons). Does this mean that OOB management certificate creation is not supported on Server 2008R2 Standard, and so I will not be able to use ConfigMgr 2012 SP1 for out of band management because I am
unable to generate the required certificates?Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
In order to use the cert template, you must use an Enterprise version of Windows. Only the Enterprise (or datacenter) version have the right version of the Certificate server.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Doubt about difference between "Send to sap" and "Send EWA Alerts to SAP"
Hello All
I hope that you can help me is juts a doubt about 2 check boxes
I'm on setup of a EWA but when i´m on the configuration (dates, transfers ewa to sap, archiving of EWA etc) i see 2 check boxes
that i don't know what is the difference
The path is the following
Tcode = DSWP --> Select the solution --> (the left column) Operations Setup --> Solution Monitoring --> EarlyWatch Alert --> Setup EarlyWatch Alert
Could you tell me what is the difference between "Send to SAP" and "Send EWA alerts to SAP" boxes?
Thanks and have a nice dayHello Cherios,
The "Send to SAP" check box is used when you want to sent a Production or Test (Quality) systems EWA data to SAP for analysis.
Currently the "Send EWA Alerts to SAP" is not used at this time, and actually cannot be selected, and saved.
There should now be no doubt about the two check box fields .
Hope this information is helpful.
Regards,
Paul -
Question about out-of-band when deploying NAC
1. When I deploy NAC, a PC or user device is on the certified list. If User device is infected by virus, NAC Server can recognize device which is infected and prevent PC or not when I deploy out-of-band (not in-band)?
2. When I deploy out-of-band, cisco nac appliance can configure bandwidth for group users or not?
Thank you for your answer.
Duy Khang1) Answer: No. Clean Access (NAC Appliance) will not detect when a system is infected with a virus, regardless of which deployment (In-Band or Out of Band) is used.
2) Answer: No. When deployed out of band, once the posture is completed, the client traffic no longer goes through the Clean Access server so there is no way to apply bandwidth or any other controls to it via Clean Access. In order to apply bandwidth or access restrictions via CCA, the CCA server would have to be in-band. -
Doubt about a null value assigned to a String variable
Hi,
I have a doubt about a behavior when assigning a null value to a string variable and then seeing the output, the code is the next one:
public static void main(String[] args) {
String total = null;
System.out.println(total);
total = total+"one";
System.out.println(total);
}the doubt comes when i see the output, the output i get is this:
null
nulloneA variable with null value means it does not contains a reference to an object in memory, so the question is why the null is printed when i concatenate the total variable which has a null value with the string "one".
Is the null value converted to string ??
Please clarify
Regards and thanks!
Carlosnull is a keyword to inform compiler that the reference contain nothingNo. 'null' is not a keyword, it is a literal. Beyond that the compiler doesn't care. It has a runtime value as well.
total contains null value means it does not have memory,No, it means it refers to nothing, as opposed to referring to an object.
for representation purpose it contain "null"No. println(String) has special behaviour if the argument is null. This is documented and has already been described above. Your handwaving about 'for representation purpose' is meaningless. The compiler and the JVM don't know the purpose of the code.
e.g. this keyword shows a hash value instead of memory addressNo it doesn't: it depends entirely on the actual class of the object referred to by 'this', and specifically what its toString() method does.
similarly "total" maps null as a literal.Completely meaningless. "total" doesn't 'map' anything, it is just a literal. The behaviour you describe is a property of the string concatenation operator, not of string literals.
I hope you can understand this.Nobody could understand it. It is compete nonsense. The correct answer has already been given. Please read the thread before you contribute. -
Hi,
We configured the Out of Band component, but are using Intel SCS RCS to provision AMT devices remotely. The remote configuration process with Intel SCS works fine; we are able to connect to the AMT web UI and we can use a free KVM tool to manage the computer
remotely.
The AMT devices are configured with AD integration, so an object is created for each of them in a specific OU. Also, an AD group is added to the AMT devices so remote PT Administration permission is granted to it. This group includes the ConfigMgr Site
Server account, the account of the server running the Out of Band Service Point and my own user account.
This configuration seems OK since when connecting to the AMT web UI, I use Windows Integrated authentication with my user account and can manage the device successfully.
So the only step remaining is running the OOB discovery to enable Out of Band features for the computers in the SCCM console. We want to use the ConfigMgr OOB console. I right-click a computer or a collection and launch the AMT discovery. I check the OOB
server log, I don't see errors; the OOB service point connects to the AMT device and discover a status of 4, which is Externally provisioned, as expected. The problem is the AMT Status, AMT Version and Provisioned AMT fields for the computer in the ConfigMgr
console doesn't get updated, even after doing display refresh.
Here's the amtopmgr.log (I changed computer name and IP address information to protect client privacy) :
General Worker Thread Pool: Work thread 364 started SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
Discover COMPUTERA using IP address 192.168.12.7 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wakes up to process instruction files SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: There are 1 tasks in pending list SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
AMT Discovery Worker: Wait 20 seconds... SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 2792 (0x0AE8)
DoPingDiscoveryForAMTDevice succeeded. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
session params : https://COMPUTERA.contoso.com:16993 , 11001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:25 364 (0x016C)
DoWSManDiscovery succeeded with user name: admin. AMTStatus = 1. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Start Kerberos Discovery SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Flag iWSManFlagSkipRevocationCheck is not set. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
session params : https://COMPUTERA.contoso.com:16993 , 484001 SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
DoKerberosWSManDiscovery succeeded. AMTStatus = 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
Discovery to IP address 192.168.12.7 16 15:16:32 364 (0x016C)
CSMSAMTDiscoveryTask::Execute, discovery to STI17259CPCO succeed. AMT status is 4. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CSMSAMTDiscoveryTask::Execute - DDR written to E:\SMS\MP\OUTBOXES\ddr.box SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Fill Machine Property' SID=1 MUF=0 PCNT=5, P1='COMPUTERA' P2='' P3='COMPUTERA.contoso.com' P4='' P5='' SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\6heghx71.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=10 MUF=0 PCNT=1, P1='COMPUTERA.contoso.com' 16 15:16:32 364 (0x016C)
CStateMsgReporter::DeliverMessages - Created state message file: E:\SMS\MP\OUTBOXES\StateMsg.box\rmit91js.SMX SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
General Worker Thread Pool: Succeed to run the task COMPUTERA.contoso.com 16 15:16:32 364 (0x016C)
General Worker Thread Pool: Work thread 364 has been requested to shut down. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
General Worker Thread Pool: Work thread 364 exiting. SMS_AMT_OPERATION_MANAGER 2014-06-16 15:16:32 364 (0x016C)
The Management Point is up and running.
Any suggestion or advice is welcomed!
Thank you
PatrickI found something interesting on this problem, it seems the OOB discovery process is working fine, but for an unknown reason, the site server is not receiving the information from the OOB Service Point to update the AMT Status of the client in the SCCM
database.
The log tells me that a DDR file is created to be sent to the site server. When looking into the SMS\MP\Outboxes\ddr.box folder, I see about 50 DDR files, the oldest one is dated when I started testing OOB discovery.
So the server is unable to send the files to the site server.
Also, since I started this thread, I noticed another issue that could be related to this problem. The same server is also holding the State Migration Point role, it is working fine, but when doing USMT operations, the status of the computer association is
not updated in the console (In Progress, Completed, missing USMT store path, etc.). When looking into the SMS folder on the server, I see a big backlog of SVF files containing information related to the SMP.
I looked into the log files, but didn't find the errors yet to explain this.
The computer account of the server is a member of the SMS_SiteSystemToSiteServerConnection_Stat_XXX group on the site server.
Note that status messages are being sent successfully, I see them in the Monitoring node of the console under Component State, and there is no backlog in the SMS\MP\Outboxes\statemsg.box folder.
Tnx for your help
Patrick -
Out of band Clocking between MWR-2941
Good morning I'm having problems configuring out
of band clocking between two MWR-2941
I have configured one MWR-2941 to
Remote
recovered-clock slave
interface Virtual-Cem 0/24
cem 0
xconnect 10.10.10.2 7600 encapsulation mpls
network-clock select 1 PACKET-TIMING
network-clock-select hold-timeout 900
the Master Router is getting it clock signal from an E1/T1 interface
MASTER
controller E1 0/0
clock source internal
cem-group 0 unframed
description Clocking-Signal
controller E1 0/13
clock source line
cem-group 0 unframed
interface CEM0/0
description Clocking-Signal
no ip address
cem 0
xconnect 172.16.20.26 7600 encapsulation mpls
interface CEM0/13
no ip address
cem 0
xconnect 172.16.20.26 11591 encapsulation mpls
with this configuration i can't get any clocking at the remote site. I have configured this between a Cisco 7609 and the MWR-2941 without problem, but in the Cisco 7609 I can create another virtual-cem interface. But I can't find a way to create a virtual-cem in the MWR-2941 that should be working as the clock master.
Any help will be greatly appreciated.
Thank you very mucy.Thank you for your attention ,
I did not see such out put of my sho mac add command ,
I sent a image of my current topology , it may be useful , please find it.
I used router instead of cisco layer 3 switches (SVI for user access vlan is configured on router as sub interfaces) , and On my NAC Server I created a vlan mapping rule that map unauthenticated vlan to one of my access vlan ,
I have a problem with my Managed subnet !! I have to put my Managed Subnet as default gateway for my client because if I put the router SVI cisco nac agent client does not pop up at all !!!
I read different documents about that and all of them said that your client default gateway must be SVI , but it does not work,
best regard -
Out-of-Band provisioning issue
Hi there,
I'm migrating from Configmanager 2007 to 2012 SP1 at a customer.
With CM 2007 I'd succesfully implemented Out-of-band management. Now I'm having some issues with provisioning AMT from CM2012.
The testing machines have never been provisioned with CM2007.
The oobmgmt.log at the client logs succesful activated the device.
At the server in the amtopmgr.log file the follwoing error is logged:
Error: Can NOT get OTP from target device (MachineId = 16777220)
I know this has to do with a one time password that is generated...I dont know where I have to look to resolve this issue.
Part of the amtopmgr logfile:
>>>>>>>>>>>>>>>Provision task (In Band Provision) begin<<<<<<<<<<<<<<< SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23
5268 (0x1494)
Provision target is indicated with SMS resource id. (MachineId = 16777220 DSK-0925.water.intern) SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Found valid basic machine property for machine id = 16777220. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Warning: Currently we don't support mutual auth. Change to TLS server auth mode. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
The provision mode for device DSK-0925.water.intern is 1. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
The IP addresses of the host DSK-0925.water.intern are 10.10.128.76. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Root hash of provisioning certificate is 2796BAE63F1801E277261BA0D77770028F20EEE4. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Attempting to establish connection with target device using SOAP. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Create provisionHelper with (Hash: FD16D8C6A482C73C12832BC19D5BCABD4460D5A3) SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Set credential on provisionHelper... SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Try to use provisioning account to connect target machine 10.10.128.76... SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:23 5268 (0x1494)
Core version of target machine 10.10.128.76 is: 9.0.3. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:24 5268 (0x1494)
Succeed to connect target machine 10.10.128.76 using provisioning account #0. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:24 5268 (0x1494)
GeneralInfo.GetProvisioningState finished with HResult = 0x0, status = 0x0, clientErr = 0. SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:24 5268 (0x1494)
Get device provisioning state is In Provisioning SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:24 5268 (0x1494)
Error: Can NOT get OTP from target device. (MachineId = 16777220) SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:25 5268 (0x1494)
CStateMsgReporter::DeliverMessages - Queued message: TT=1201 TIDT=0 TID='Unspecified' SID=13 MUF=0 PCNT=1, P1='DSK-0925.water.intern' P2='' P3='' P4='' P5='' SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:25 5268
(0x1494)
CStateMsgReporter::DeliverMessages - Created state message file: C:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\ikjsq3c0.SMX SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:25
5268 (0x1494)
>>>>>>>>>>>>>>>Provision task (In Band Provision) end<<<<<<<<<<<<<<< SMS_AMT_OPERATION_MANAGER 28-10-2013 13:34:25
5268 (0x1494)
Anyone has a good idea?
Thanks in advance.
MarkHi Mark,
I am experiencing the same issue you are, but only with one machine. I have over 1000 machines that have successfully provisioned, so it's a bit of a mystery at the moment.
I have confirmed that my failing machine does have a OTP in the SCCM database by running the following query:
select MachineID ,OTP from dbo.AMT_MachineProperties where HostName = '<machine name>'
This shows a OTP for each machine, but I'm still having trouble with this one. Did you ever find a solution?
Thanks,
Russel -
Out-of-Band SMASH Library Event ID 4509 (SCOM 2012SP1UR3)
Hi!
I´m using the "Microsoft System Center Out-of-Band SMASH Library" 7.0.8707.0 found here:
http://blogs.technet.com/b/momteam/archive/2012/04/02/ws-management-smash-device-discovery-template-released.aspx
It is a reqiurement for some of DELLs MP:s.
After creating a working (as it seems) discovery with the template, Event ID 4509 is logged with irregular intervals:
The constructor for the managed module type "Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.GroupCalculationModule" threw an exception. This module was running in rule "Microsoft.SystemCenter.OOB.2cf63b4c061f4a67bac712ed75a57916.PoolManagesSMASHDevice.Discovery"
running for instance "Network Monitoring Resource Pool" with id:"{E9178425-9B5C-85C1-E1DF-7E440E2E9FBF}" in management group "OMGROUP".
The id “e9178425-9b5c-85c1-e1df-7e440e2e9fbf” is the "Network Monitoring Resource Pool", which is also the pool chosen for the discovery.
I´ve also noticed that the initial discovery is carried out by the "All Management Servers Resource Pool", but then monitoring seem to be done by "Network Monitoring Resource Pool", but I don´t know if that is important:
I don´t know what problems that can arise from this error, but it´s disturbing.
Anyone else using this feature and seen or not seen the same?
Regards
PeterTo fix your issue, refer to below link
http://www.briandeyo.us/brd/wp/index.php/2009/10/08/operations-manager-not-sending-email-after-im-notification-settings-changed-event-id-4509
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer". -
Doubt about unicode conversion
Dear Friends,
I have a doubt about the unicode conversion. I have read (one server strategy) that I have to do export (R3load), delete the ECC 6.0 non-unicode, install an unicode database and then import with R3load. My doubt is about the deletion of ECC 6.0 non unicode. Why? can I convert to unicode only with an export (R3load) and subsequent import (R3load) without any deletion?. Obviously I must to change the SAP kernel with a unicode one. Is it correct?
Cheersyou can not convert a SAP System to unicode by just exchanging the executables from non unicode to unicode ones.
a non unicode SAP Oracle database is typically running with a database codepage WE8DEC or US7ASCII (well this one is out of support).
so every string stored in the database is stored using this codepages or SAP-Internal codepages.
When converting to unicode you have to convert also the contents of the database to unicode. As unicode implementation starts at a time where Oracle did not support mixed codepage databases (one tablespace codepage WE8DEC the other one UTF8) inplace conversions are not possible. To keep things simpler, we still do not support mixed codepage databases.
Therefore you have to export the contents of your database and import it to a newly created database with a different codepage if you want to migrate to unicode.
regards
Peter -
Doubt about message in SmsAdminUI.log
Hi guys,
I have a doubt about this message error in SmsAdminUI.log occur when I open console SCCM 2012:
[6, PID:18032][DATE 08:13:35] :System.Runtime.InteropServices.COMException\r\n\r\n at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[1, PID:9828][DATE 11:53:21] :Property: 'Compatible'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
My console open normally, any help?
Thanks.I would not worry about it as long as the console works as expected.
Torsten Meringer | http://www.mssccmfaq.de
Maybe you are looking for
-
Calling ORACLE Store Procedure with parameters in user define function
Hi everybody, We have a scenario connecting Oracle DB thru JDBC adapter. We have to call store procedure with input parameter and output parameter to retrieve data from DB. The implementation was made using JDBC adapter by building the correct XML me
-
Packging material as a line item in delivery
Hi SAP experts, Can anyone tell me " How the packaging matrial come as a line item in delivery?" For eg: item Description Quantity 10 ABC123(main material) 20 900
-
Material Type restriction for M_MATE_MAR not working
HI all, I want to restrict a user to only use the Material Type Waste ABF, but its not working. Secondly , the Auth Object M_MATE_MAR, is also part of other roles which have this Auth Object. Can you experts please suggest what to do. Thanks
-
As I mentioned above I have three pc's all running win7 and firefox 6.02. On this box website fonts are different than the others. All of the "option" settings are identical on all of the boxes. Including "allow pages to choose their own fonts". I un
-
Complete newbie needs help inserting flv file into DW
This is a multi-part message in MIME format. ------=_NextPart_000_0015_01C98602.377A5370 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I'm having a challenge today. A client sent me two flv files. When I =