Doubt About HTTP To File
Hi Expers,
I have one doubt. If iam Developing the scenario HTTp To File
Then do we need Any RFC Connection.
When Do We need RFC Connection In case if we r implementing with HTTP
Please clear me.
Regards
Khanna
<u></u>Hi,
Please look through the below process...
DESIGN.
1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
2. Craate MessageTypes for the two datatypes.
3.Create Message Interfaces. the One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
4. Do the mapping. It will be mostly a one to one mappingof the fields.
5.Create the Interface Mapping.
Configuration
1. Import your Business System under your Configuration Scenario.
2.Create 2 communication channels. One for Http as a sender and one for File as a receiver.
check these links for the confiuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
3.Do the Receiver Agreement for file. HTTP doesnt need a sender agreement.
4.DO the Receiver Determination and Interface Determination.
Alos check "Step-By-Step Approach for Implementing XI Scenarios"
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
Do let me know if you have further clarifications
Hope this helps
Regards
Kiran..
Similar Messages
-
Doubts about HTTPS requests and Java proxy
Hello,
I need help about SSL connections and Java.
I'm developing a HTTP/S proxy with Java. To test my proxy, I use Firefox. I configure the proxy option in the browser. The proxy works good with HTTP requests, but with HTTPS requests doesn't work and I don't know why.
I explain the steps that I do for a HTTPS request:
* The browser sends a CONNECT message to the proxy.
I check that the proxy receives the CONNECT request correctly.
* The proxy establish a secure connection with the content server.
I use an SSLSocket to connect with my content server, and the SSL handshake is succesful.
* The proxy sends a 200 HTTP response to the client:
I send
HTTP/1.0 200 Connection established[CRLF]
[CRLF]
to the application client (Firefox)
* The proxy sends/receive data to/from Firefox/content server
I have a Socket between Firefox and my proxy, and a SSLSocket between my proxy and my content server. I use two threads to communicate the client and the server.
Java code:
//Thead server-->proxy-->application(Firefox)
ThreadComm tpa = new ThreadComm(bis_serverSSL, bos_app);
//Thread application(Firefox)-->proxy-->server
ThreadComm tap = new ThreadComm(bis_app, bos_serverSSL);
The "tpa" thread reads from the SSLSocket between the proxy and the server and sends data to the Socket between the proxy and Firefox.
The "tap" thread reads from the Socket between the proxy and Firefox and sends data to the SSLSocket between the proxy and the server.
This is the class ThreadComm:
public class ThreadComm extends Thread{
private BufferedInputStream bis = null;
private BufferedOutputStream bos = null;
public ThreadComm(BufferedInputStream bis, BufferedOutputStream bos) {
this.bis = bis;
this.bos = bos;
@Override
public void run() {
int b = -1;
FileOutputStream fos = null;
do {
try {
b = bis.read();
System.out.print((char) b);
fos.write(b);
bos.write(b);
bos.flush();
} catch (Exception ex) {
Logger.getLogger(ThreadAplicacionProxy.class.getName()).log(Level.SEVERE, null, ex);
//b=-1;
} while (b != -1);
}But this doesn't work and I don't know why.
I have an Apache server with the mod_ssl enabled as content server, I can send requests (with Firefox) to the port 80(HTTP request) and 443(HTTPS request) without use my proxy and it works. If I use my proxy, HTTP request works but with HTTPS request doesn't work, I look the log of Apache and I see:
[Tue Apr 27 17:32:03 2010] [info] Initial (No.1) HTTPS request received for child 62 (server localhost:443)
[Tue Apr 27 17:32:03 2010] [error] [client 127.0.0.1] Invalid method in request \x80\x7f\x01\x03\x01
[Tue Apr 27 17:32:03 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue Apr 27 17:32:03 2010] [info] [client 127.0.0.1] Connection closed to child 62 with standard shutdown (server localhost:443)
Why it say? Invalid method in request \x80\x7f\x01\x03\x01 , my proxy sends the data that the Firefox sends.
I think than I have follow the explanations of [1] but doesn't work, I have problems in implementation in Java but I don't know where.
I appreciate any suggestions.
Thanks for your time.
[1] http://www.web-cache.com/Writings/Internet-Drafts/draft-luotonen-web-proxy-tunneling-01.txtejp, I have checked the socket between the proxy and server and ... You are right! , I was using the port 80 instead of the 443 (incredible mistake!, I'm sorry). I was convinced that I was using the port 443... Well, is a little step, but I still have not won the war :)
If I see the log files of Apache, We can see that something goes wrong.
localhost-access.log
>
127.0.0.1 - - [04/May/2010:17:44:48 +0200] "\x 80\x 7f\x01\x03\x01" 501 219
>
localhost-error.log
>
[Tue May 04 17:44:48 2010] [info] Initial (No.1) HTTPS request received for child 63 (server localhost:443)
[Tue May 04 17:44:48 2010] [error] [client 127.0.0.1] Invalid method in request \x80\x7f\x01\x03\x01
[Tue May 04 17:44:48 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue May 04 17:44:48 2010] [info] [client 127.0.0.1] Connection closed to child 63 with standard shutdown (server localhost:443)
>
I think that this happens because Apache receives the data without decrypt, this is the reason because in the log we can see the "Invalid method in request \x80\x7f\x01\x03\x01". This supposition is true?
ejp, you say that the "Termination is quite tricky." I have changed my code following yours suggestions (using the join and the shutdownOutput) but the threads don't die.
I explain you what I do:
(in time 1)
I launch the thread (threadFirefoxToApache) that reads data from Firefox and sends to Apache.
I launch the thread (threadApacheToFirefox) that reads data from Apache and sends to Firefox.
(in time 2)
threadFirefoxToApache sends the firts data to the server.
threadApacheToFirefox is waiting that the server says something.
(in time 3)
threadFirefoxToApache is waiting that Firefox says something.
threadApacheToFirefox sends data to Firefox.
(in time 4)
threadFirefoxToApache is waiting that Firefox says something.
threadApacheToFirefox is waiting that Firefox says something.
and they are waiting... and never finish.
In time 2, these first data are encrypted. The server receives these data and It doesn't understand. In time 3, the server sends a HTTP response "501 Method Not Implemented", here there is a problem because this data must be encrypt. According to the documentation that I read, the proxy cannot "understand" this data but I can "understand" this data. What's happen?
Firefox encrypt the data and send to the proxy. This It's correct.
The proxy encrypt the data another time, because I use the SSLSocket to send the data to the server. Then the server receives the data encrypted two times, when decrypt the data gets the data encrypted one time. And this is the reason why the server doesn't understand the data that sends Firefox. It's correct? May be.
Then If I want that the server receives the data encrypted one time I need to use the socketToServer, It's correct?
I will supposed that yes. If I use the socketToServer, the proxy doesn't understand nothing, because the data received from the socketToServer are encrypted (I only see simbols), but the Apache log says that there is a problem with the version? (If I use the socketToServer the threads die)
>
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 read finished A
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 write change cipher spec A
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 write finished A
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 flush data
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1756): OpenSSL: Handshake: done
[Tue May 04 19:55:42 2010] [info] Connection: Client IP: 127.0.0.1, Protocol: TLSv1, Cipher: RC4-MD5 (128/128 bits)
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1817): OpenSSL: read 5/5 bytes from BIO#29bd910 [mem: 29ea0a8] (BIO dump follows)
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1750): -------------------------------------------------------------------------
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1789): | 0000: 80 7f 01 03 .... |
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1793): | 0005 - <SPACES/NULS>
[Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1795): ------------------------------------------------------------------------
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue May 04 19:55:42 2010] [info] [client 127.0.0.1] SSL library error 1 reading data
[Tue May 04 19:55:42 2010] [info] SSL Library Error: 336130315 error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number
[Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
[Tue May 04 19:55:42 2010] [info] [client 127.0.0.1] Connection closed to child 63 with standard shutdown (server localhost:443)
>
What option is the correct? I need use the SSLSocketToServer or socketToServer to send/read the data to/from the server?. Use the SSLSocket has sense because the data travel in a secure socket, but use the Socket also has sense because the data are encrypted and they are protected by this encription. It's complicated... -
Doubt About the .TPZ File Importing
Hi Experts,
Here We have Completed PI 7.0 Installation.
We Imported XI3_0_SAP_BASIS_6.40_12_00.tpz in to IR Instead of XI7_0_SAP_BASIS_7.00_06_00.tpz.
Q1) How to Remove the Old BASIS .TPZ File ??????????
Q2) From Where we Can Remove it ?????
Q3) With Out Remove that Old File, Can we Import the New BASIS .TPZ File, Is It Corret ????
Q4) Existing these Two BASIS .TPZ Files in IR Is there Any Problem ???
Please Help Me
Regards
KhannaHi,
>><i> Q1) How to Remove the Old BASIS .TPZ File ??????????</i>
GO TO -> usr\sap\<SID>\SYS\global\xi\repository_server\import\importedfiles\ to remove
>><i>From Where we Can Remove it ?????</i>
from the same above path you can remove it
Regards,
Ramesh P -
Doubts about use of REPORTS_SERVERMAP with Forms11g HA
Hi,
I'm configuring a Linux 64bits Forms/Reports 11g HA environment, the point is that i have two nodes, each one with its Forms and Reports servers, let's say FormsA and ReportsA for the first node and FormsB and ReportsB for the seconde node.
i want FormsA to be able to call reports from ReportsB and FormsB to be able to call reports from ReportsA.
I've been reading about REPORT_SERVERMAP
http://docs.oracle.com/cd/E12839_01/bi.1111/b32121/pbr_conf003.htm#autoId5
But i have some doubts about its use:
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
2. The link provided says "Using RUN_REPORT_OBJECT. If the call specifies a Reports Server cluster name instead of a Reports Server name, the REPORTS_SERVERMAP environment variable must be set in the Oracle Forms Services default.env file"
In fact i'm using RUN_REPORT_OBJECT but
what is the Reports Server cluster name ?? and where do i find that name ??
3. Is this configuration well defined:
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
4. At forms applications when using RUN_REPORT_OBJECT, can i assume that the report server name will be the cluster name specified at the REPORTS_SERVERMAP ??
5. Which files should i modify rwservlet.properties or default.env ??
Hope you can help me :)
Regards
CarlosHi,
1. I will not use a shared cluster file system or any way of cache solution, i will only have my rdf files on each node, and i'm wondering if just by configuring this parameter i will be able to get the effect mentioned above ??
--> In such case what could go wrong is
Suppose Run_report_object executed jobs successfully to ReportsA
But web.show_document command for getjobid failed ( as ReportsA went down by this time)
--> You will not get the output shown ( though job was successful)
If shared cache was enabled, then Even if ReportsA is down, other cluster member ( say ReportsB)
will respond back to web.show_document.
Point 2,
--> Under HA is it highly recommended to use web.show_document ( a servlet call) to execute reports. This is to help use all HA features at the HTTP , Webcache or load balancer level.
However if there is migrated code or Run_report_object is must, then the recommendations as you see in the pointed document is must.
REPORTS_SERVERMAP setting needs to be configured in rwservlet.properties file and also in default.env Forms configuration file to map the Reports Server cluster name to the Reports Server running on the mid-tier where the Load Balancer forwarded the report request.
For example FormsA, ReportsA, cluster name say rep_cluster
default.env file
REPORTS_SERVERMAP=rep_cluster:ReportsA
Where "rep_cluster" is the Reports Server cluster name and "ReportsA" is the name of the Reports Server running on the same machine as FormsA
rwservlet.properties file
<reports_servermap>rep_cluster:ReportsA</reports_servermap>
At default.env this is not a valid entry
REPORTS_SERVERMAP=clusterReports:ReportsA;clusterReports:ReportsB
what is the Reports Server cluster name ?? and where do i find that name ??
--> This is created via EM on the report server side.
Would recommend to refer following documents at the myoracle support repository
How to Setup Reports HA (High Availability - Clusters) in Reports 11g [ID 853436.1]
REP-52251 and REP-56033 Errors When Calling Reports From Forms With RUN_REPORT_OBJECT Against a Reports Cluster in 11g. [ID 1074804.1]
Thanks -
A how-To guide about splitting import files exists?
Hi All,
in his Webinar https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/409e4529-adbc-2a10-4d9b-e8fade570414
Klaus David said a "A how-To guide about splitting import files exists" (Page 20).
Can anybody tell me where to find this guide?
Please mail to becker.roman ( at ) web . de
Best regards
RomanI found the link here, if you are still looking.
I didnot check the contents yet but the title says
MDM 5.5 SP06 - IT Scenario Configuration Guide -
https://websmp202.sap-ag.de/~sapidb/011000358700001119482007E
Thanks
Satya -
Doubt about Bulk Collect with LIMIT
Hi
I have a Doubt about Bulk collect , When is done Commit
I Get a example in PSOUG
http://psoug.org/reference/array_processing.html
CREATE TABLE servers2 AS
SELECT *
FROM servers
WHERE 1=2;
DECLARE
CURSOR s_cur IS
SELECT *
FROM servers;
TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
s_array fetch_array;
BEGIN
OPEN s_cur;
LOOP
FETCH s_cur BULK COLLECT INTO s_array LIMIT 1000;
FORALL i IN 1..s_array.COUNT
INSERT INTO servers2 VALUES s_array(i);
EXIT WHEN s_cur%NOTFOUND;
END LOOP;
CLOSE s_cur;
COMMIT;
END;If my table Servers have 3 000 000 records , when is done commit ? when insert all records ?
could crash redo log ?
using 9.2.08muttleychess wrote:
If my table Servers have 3 000 000 records , when is done commit ? Commit point has nothing to do with how many rows you process. It is purely business driven. Your code implements some business transaction, right? So if you commit before whole trancaction (from business standpoint) is complete other sessions will already see changes that are (from business standpoint) incomplete. Also, what if rest of trancaction (from business standpoint) fails?
SY. -
Doubt about proxies implementation
hi experts i have small doubt about proxies implementation
1. if we r implementing client proxies, it means sap r/3(proxy)->>xi->>>file
system.here where we have to execute the SPROXY transaction. in sap r/3 or
in the xi server.and the next thing is where we have to write the report program
to trigger the interface.in sap r/3 or in the xi server.
2. if we r implementing server proxies, it means File->>xi->>>sap r/3
(proxy).here where we have to execute the SPROXY transaction. in sap r/3 or
in the xi server.
please clear me
Regards
giriSreeram,
The Integration Server and the client on which you generate the proxies should not be the same. If they are different then yes, you can use another client in your XI box itself to generate proxies and trigger the call to XI.
If you see this blog by Ravi ( incidentally he is my boss as well ) this is exactly what we have done as well.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
When you say XI, you mean the Client on which the Integration Server is running! XI is basically a R3 instance with more functionality and its own Integration Engine.
Regards
Bhavesh -
Hi everyone!
I have a doubt about applying patch.
I just applied this patch (using GUI):
Oracle® Database Patch Set Notes
*10g Release 2 (10.2.0.4) Patch Set 3 for Microsoft Windows (32-Bit)*
Initially, there was an error stating that some other process is accessing one particular dll.
I ignored it.
I rerun the patch installation thinking that I need to get that dll as well.
It gave a list of what has been installed and what can be installed.
So, I selected all the remainders and installed.
It was successful. Now, would it have ignored that dll or installed it?
Please advice.
Thanks in advance.
Cheers!
Nith
Edited by: user645399 on Nov 26, 2010 10:24 AMuser645399 wrote:
Hi everyone!
I have a doubt about applying patch.
I just applied this patch (using GUI):
Oracle® Database Patch Set Notes
*10g Release 2 (10.2.0.4) Patch Set 3 for Microsoft Windows (32-Bit)*
Initially, there was an error stating that some other process is accessing one particular dll.
I ignored it.
I rerun the patch installation thinking that I need to get that dll as well.
It gave a list of what has been installed and what can be installed.
So, I selected all the remainders and installed.
It was successful. Now, would it have ignored that dll or installed it?
Please advice.
Thanks in advance.
Cheers!
Nith
Edited by: user645399 on Nov 26, 2010 10:24 AMEvenif you've stopped all the windows services, sometimes some DLLs remains utilized. What I do is, make all the oracle related services manual and then restart the server.
You can't ignore any dll related errors. If a dll is in use, oracle patching process will not replace that with a newer version of dll. I'll strongly recommend the use of ' Microsoft Process Monitor' utility to monitor, what is running on my server.
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Regards,
S.K. -
i am loocking for https wsdl file ..can you please provide any sample wsdl file
Hello there,
Can you please provide more details about your need regarding the WSDL file so we can know more precisely what do you want?
Do you know anything about wsdlGenerator component? I don't know where or how exactly do you want to use the wsdl, but check it out. (Here is the documentation )
Regards,
Stefan
oraclecloud -
Doubt about Scan and Update Catalog Objects That Require Updates link
Hi,
I have a doubt about 'Scan and Update Catalog Objects That Require Updates' link in Administration,
how can I know how many objects that required upgrading before I click this link???
in doc.
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750
section 17.2.4 Updating Catalog Objects
It is said 'You can confirm the need to update by viewing the metrics in Fusion Middleware Control. In the Catalog folder, find a metric called "Reads Needing Upgrade" with description "The number of objects read that required upgrading." '
but I don't find it . my OBIEE version :11.1.1.6.2
conld you pleae help me ??
thank you in advance.That link should be there in 6 version.
I've verified in 11g6 version doc the same is existing
ref: http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/prescatadmin.htm#BAJDDFFI
BTW:
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750is 11g7 version
Thanks,
http://cool-bi.com -
Doubt about Tunning View Objects
Hi !. I have the following doubt about tunning View Objects:
If I have the following configuration on a VO:
All Rows
In Batches Of: 11
As Needed
Access Mode: Scrollable
Range Size: 10
Total Records On The Table: More than 100
What would happen is that while the initial render, the view cache is fetch with 11 rows from the table and the ui table shows 10. In subsequent scroll events, more queries again will be done but not when the user scrolls back. My doubt is this one: Why, while the initial render If I put a breakpoint in this overrided method executeQueryForCollection, the execution reachs there but in subsequent scroll events (forward) the execution doesn't reach there ?. I understand thast this should happen as the required rows are not yet in the cache. I would like to know a way to test this access mode and what method is executed in every roundtrip to the DB. Thankx !.I don't think ADF needs to execute the query again - it just needs to fetch the next set of records.
So if the cursor is already open, no need to issue another query.
You can use the HTTP Analyzer to watch network traffic
Monitoring ADF Pages Round-Trips with the HTTP Analyzer
And you can use the logging features of ADF to see the queries being executed.
Declarative View Objects (VOs) for better ADF performance -
Let's say I'm downloading several files, for each file that I'm downloading two new files appear in my download folder. For 'vol1.rar' I have ''an empty'' 'vol1.rar' and a 'vol1.rar.part' file, same for 'vol2.rar', 'vol3.rar', etc.
I would like to block this empty 'vol1.rar' file from appearing at all - it disappears after the download is finished anyway, and the .part file gets renamed with the actual name.
I'm downloading files to my desktop, from where I move them to the folders I want them in - having this disappearing 2nd file messes up the order I download the files in - if I add a new file after one of the files I was downloading has finished, the file be placed in the empty spot that the finished file has created, making it harder for me to move to the correct folder.
A lot of people have asked if it was possible to turn off the .part file, but I haven't seen a single thread about the empty file instead.
I know this file isn't necessary, because I moved it to another folder/deleted it many times before the download was finished and the real file was still fine.
So, any ideas as to how to block this file?I don't believe there is any way to prevent file downloading if you allow internet access at all. as Király says, whatever they download and install will be limited to the guest account and will go poof on the logout.
however you can disable CD/DVD and external drives access. some of it can be done by enabling parental controls on the guest account. for more options you can install server admin tools
http://support.apple.com/downloads/ServerAdmin_Tools_105
and use workgroup manager to set further restrictions on the guest account.
P.S. workgroup manager can also forbid guest to mount disk images which will effectively make it impossible to install any programs at all even in the guest account.
Message was edited by: V.K. -
Doubt about message in SmsAdminUI.log
Hi guys,
I have a doubt about this message error in SmsAdminUI.log occur when I open console SCCM 2012:
[6, PID:18032][DATE 08:13:35] :System.Runtime.InteropServices.COMException\r\n\r\n at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[1, PID:9828][DATE 11:53:21] :Property: 'Compatible'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
My console open normally, any help?
Thanks.I would not worry about it as long as the console works as expected.
Torsten Meringer | http://www.mssccmfaq.de -
Dear guys,
I have a question about HTTPS. I try to run the midlet over HTTPS but I got an error something like they don't know this protocol. I think I heard that WTK104 supports HTTPS. So the problem might come from the midp1.0.3. I read the user guide it said like it is optional for midp1.0.3 to support HTTPS or I have to recompile this module specially. I really wonder whether we do have to do that or not. What's more is how to do that? In the user guide is not too clear. Any idea about this?
Thanks!!
UdsyHi john wen
Thanks a lot for your help. However, after I tried to use build to include HTTPs, I still get error following
$ make INCLUDE_HTTPS=TRUE
find: ./../../../kvm/api/src/java: No such file or directory
find: ./../../../kvm/api/src/javax: No such file or directory
find: ./../../../kvm/api/src/com/sun/cldc: No such file or directory
find: ./../../../kvm/api/src/java: No such file or directory
find: ./../../../kvm/api/src/javax: No such file or directory
find: ./../../../kvm/api/src/com/sun/cldc: No such file or directory
find: ./../../../kvm/tools/preverifier/src: No such file or directory
find: ./../../../kvm/tools/jcc/src: No such file or directory
find: ./../../../kvm/tools/preverifier/src: No such file or directory
make: link: Command not found
make: *** [bin/preverify.exe] Error 127
I don't know why. I read from cygwin that I have to use make instead of gnumake. I also already change directory to c:/j2me/midp1.0.3fcs/build/win32 and then started building. Do you have any idea about this?
thanks
udsy -
Doubt about the sizing in the CPH
Hi gurus!
I have the following doubt about the sizing in the CPH. I'm going to implement the CCMS BI CONTENT, i read the Note 979581 - Installing and configuring the CCMS BI Content, but in the document called "IT Performance Reporting Using SAP NetWeaver Business Intelligence" you can see images in this link:
http://www.servidor-imagenes.com/show-image.php?id=050236bd91654e16c94a559350611dff
here said how I can calculate the sizing based in Data Record Size per each Metric stored, but in specific, about the example: 20 systems, 17 CPH metrics. are included SCM, BI, ECC, SOLMAN in this 20 systems? And about the 17 CPH Metrics is talking about ratios? what's mean the CPH metrics?, How can I know what is my CPH metrics?
I hope can help me
Best Regards
Ramon Sanchezthis theme has been closed on our enterprise
Maybe you are looking for
-
I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks
-
Printing problems with HP printer
We've recently got a new HP Color LaserJet CP3525x printer at the office and the printer will not let me print out Two-Sided, saying OFF (in the Layout menu). Can I download something to make it work. It worked with the old printer! Regards Jr.
-
Hi can anybody tell me if i can mount a NTFS partition under Solaris 10?? Thanks for ur help.
-
#Error in Formula in Financial Reports in 9.3.3
There are several Financial Reports presenting an error in columns with formulas referencing other cells with No Data values. Although configured to change the NoData in the grid with 0, the formula still returns #ERROR as a result. I tested to chang
-
Portal adds nbsp; when rendering custom type
Hi, We have created a custom item type with an associated function/procedure. In our region 'associated functions' is the only attribute that is displayed. Space around and between items is set to 0. Oracle Portal seems to allways render a space/blan