Doubt in sequence of steps in configuration of Insurance Benefits Plan..

Hi Associates,
In Insurance plans,I defined Insurance plan genral data,coverage variants,coverage rules,cost variants,cost rules.Finally I have done the step Assign Insurance Plan Attributes.
I struck up at this point.please help me out.Inorder to complte the configuration part of Insurance Benefits what are the sequence of steps i have to configure here.
Thanks In Advance.
SAIRAM

Hi Friends...
In the step "Define Cost rules",i have some doubts,please clarify..
1.What is meant By Base unit.
2.What is cost factor.
3.What is meant by Steplimit.
4..According to my clients company policy,the insurance cost is provided by company only.Here my doubt is should i use Employee costs or Provider costs.
Please clrify me.
Sairam

Similar Messages

Post Install Steps & Initial Configuration

Hi,
I want to confgure system monitoring on solution manager ehp1 Please tell Post Install Steps , Initial Configuration. to proceed
Thanks,
Shashi

The transaction Solman_setup is not available before sp18.....it is available in EHP1 or SP18 onwards
Hope it clarifies ur doubt
Regards
Prakhar

Import sequenceview control property from step list configuration

I have worked out a step list configuration in my development maschine
How to import it in a User Interface (labview simple UI) . I have to run it on my deployment maschine

Hi aparab,
thank you for your answer.
I am stil not sure what you exactly want to change.
If you only want to change the view of the Simple User Interface between Edit Mode and Operating Mode, you can do so by selecting Ctrl + Alt + Shift + Insert.
If you want to manipulate the look of the Sequence File, this is an X-Control in the background. If you need another look, you can change the control on the Simple User Interface in LabVIEW. But you have to implement all the functionality by yourself then.
There is a toolkit called FlexStand, that might be a solution for you. I added the links to some information about it and the product page below.
FlexStand Operator Interface™ - The Flexible NI TestStand Operator Interface - National Instruments
http://www.ni.com/white-paper/11016/en/
FlexStand Operator Interface™ von CIM Industrial Systems - National Instruments
http://sine.ni.com/nips/cds/view/p/lang/de/nid/210040
I hope, one of the points above answer your question. Otherwise, let me know and describe what you exactly what to manipulate and how it should look like. You can add some screenshots, that help me understand.
Regards,
Melanie

How to deploy custom Step List Configurations?

Step List Configurations is accessible to user via right click menu in Sequence File and Execution panes. How to deploy the custom Step List Configuration what I have at my deployment computer? Next question, if the user will modify this menu, how do not overwright the local changes with a new version installation?
Sergey Kolbunov
CLA, CTD

skof,
To you copy your Step List Configurations to another PC you can find them stored in the layout_current.bin file found in C:\Documents and Settings\<windows username>\Local Settings\Application Data\National Instruments\TestStand X.X directory. If you copy this file to the same location on another PC, or even on the same PC to a different user account, your Step List Configurations should carry over.
Since this file is stored in a directory that is different for each major version of TestStand, you shoulnd't have to worry about overwriting it if you install a new major version (4.2 over 4.1). I haven't tested for minor revisions that would share a folder (4.0 & 4.0.1) but that would be the only situation in which you might need to be concerned.
John B.
Applications Engineer
National Instruments

Modifier "step list configuration" Teststand 3.5

Bonjour, Je voudrais modifier les "steps liste configuration" sous Teststand 3.5. Je sais que la fonction existe sour la version 2010. Je voudrais ajouter des colonnes. Cette fonction existe sous Testsand 3.5 ?

Bonjour geof31,
Je pense que les documents devraient vous aider à vérifier si les actions peuvent être réalisées sous TestStand 3.5 :
Where are my TestStand Step List Configurations Stored?
Changing Columns Properties of the TestStand Sequence Editor Execution View Window
How Can I Hide Comments in TestStand?
Adding Step Numbers to Your Sequences
Cordialement,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Edit step list configurations

In teststand 3 and earlier, when executing a sequence it was shown in a column the result of the step and the high limit and low limit
Now in TS 4 it is possible to edit the step list but i did not manage to show the step result . For example if i create a new column (type expression) and just put Step.Result.numeric, xhen executing the sequence I have a popup because for some steps there is no step.result.numeric available.
My question is how to have the same as TS 3 and earlier ( Result + limits in a column when executing a sequence)

Note that the numeric measurement appears as part of the description for the numeric limit test. The default TestStand 4.0 step list configuration has a description column, just like previous versions.
I guessing that you probably know this and are purely interested in creating a custom step list configuration, but I wanted to be clear that this functionality has not been removed.

Sequence of Steps in Order type Creation

Can any let me know how a new order type can be created in SAP and the sequence of steps.

If you are referring to the Production order types following are the steps -
SPRO>Production>Shop Floor Control>Master Data>Order-->
Define Order Types
Define order type-dependent parameters
Define status profile
Define selection profiles
Define number ranges for orders
Define number ranges for confirmations
Define number ranges for reservations
Define number ranges for operations
Define number ranges for capacity requirements
Hope the above will help you.

Steps to configure Information Rights Management in SharePoint 2013 On-Premise

Hi,
What are the steps to configure Information Rights Managment [IRM] on SharePoint 2013 On-Premise.
Regards,

2. PHases
1. you will have to configure a IRM server
2. You will have to integrate IRM iwth sp server.
Below article should explain all
http://msmvps.com/blogs/ivansanders/archive/2012/06/08/check-out-the-weather-forecast-for-teched-2012.aspx

Steps to configure Planning Overview iView in MSS.

Need help with steps to configure/implement Planning Overview iView in MSS. I have done necessary configs in Define Attributes for planning overview in Customizing for ECM in R/3.
I have worked in ECM ECC 6.0 with employee based approval processes and now working on enh package4.
Thanks
Prav

Hi Vivek,
Thanks for taking time and answering. So, how do I integrate the Org Chart iVIew with these Position Profile and Organizational Unit Profiles pages? We do not need all the iViews that come with these pages. We only need the following
Position Profile
- Employee Group/Subgroup
- Holders
-Organizational Unit Profiles
-Organizational Unit Search
-Position Holders
Thanks
Preet

Steps to configure R/3 system to Portal implementation

Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
Thanks

Hello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022     SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022     SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022     SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022     SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022     SAP_R3_SelfServiceGenerics_MetaDataFIN
1.     Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2.     Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3.     Choose the Maintain JCo Destinations button.
4.     The available jCos are displayed with a red light, indicating that they are not yet maintained.
5.     In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6.     In Guided Procedure Section 1: General Data, make the following entries:
Field name     User action and values     Note
Name     <jCo_Name> or <jCo_name>_Metadata     Do not change the client number (for example, 100)
Maximal Pool Size     <keep default value>
Maximum connections     <keep default value>
Connection Timeout (msec.)     <keep default value>
Maximum Waiting Time (msec.)     <keep default value>
7.     Choose Next.
8.     In J2EE Cluster, make the following entries:
Field name     User action and values     Note
Use Local J2EE engine <SID> on <host>     Selected     Keep default values
9.     Choose Next.
10.     In Connection Type u2013 Data Type, make the following entries:
Field name     User action and values     Note
Data Type     Dictionary Meta Data     Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type     Load-balanced Connection (recommended)     For Dictionary Meta Data Connection, the value cannot be changed
11.     Choose Next.
12.     In Msg. Server Connection, make the following entries:
Field name     User action and values     Note
Message Server     <select message server for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
Logon Group     <select logon group for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
13.     Choose Next.
14.     In Security u2013 User Authentication, make the following entries:
Field name     User action and values     Note
Used Method     <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name     <enter connection user name>     For example, rfcsysuser
Password/Confirm Password     <enter a password>
Language     English
SNC Mode     Off     For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15.     Choose Next.
16.     In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17.     In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai

Steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.

Please inform detailed steps to configure Toplink 11g(11.1.1.0.1) on OC4J 10.1.3.4

Prashant,
     Hi, Also, Try one of the following 2 configuration options for eclipselink.jar on OC4J
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_1:_Add_an_eclipselink_shared-library_to_OC4J_-_recommended
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_2:_Add_a_versioned_new_EclipseLink_shared-library_module_-similarto_option_1
     The applib option is not recommended without some javax and jdbc reconfiguration and associated classloader positioning.
http://wiki.eclipse.org/EclipseLink/Examples/JPA/OC4J_Web_Tutorial#Option_3:_eclipselink.jar_in_applib_-notrecommended
     You may refer to the following post for more details.
Re: How to verify OC4J uses Oracle Toplink 10.x and not Toplink Essentials
     thank you
     /michael
http://www.eclipselink.org

Steps to Configure Speed Dial

Hello,
Need steps to configure speed dial.
Thanks
Abhishek

Hello,
Go to the phone / UDP configuration page and check the Phone Button Template and check whether you have enough lines available to configure as speed dials. If not create a new Phone button template with sufficient speed dial lines and assosiate the newlt created Phone Button Template to your phone / UDP configuration page. Clikc the link Add/Update Speed Dials on the same page and update the speed dial with the requested entries with the Label asthe Speed dial Label and the Number as the number where the speed dial shld reach.
The UDP profiles has to log out and login back for the changes to take effect.
Hope this helps..
Please let me know whether this was infromative or not.
Thanks

Steps to configure XML Gateway in Oracle

Steps to configure XML Gateway in Oracle

Hello,
This is not relevant to Integration - B2B as you might want to post this query in Ebusiness suite forum.
Rgds,Ramesh

Error in running ibots - advise steps to configure BI scheduler

Hi All,
Can anyone help me to rectify the below error while tried to create ibots using OBIEE 10.1.3.4.1 ?
+++ ThreadID: 13ac : 2011-02-07 23:47:08.171 [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Authentication Failure. Error Codes: IHVF6OM7:OPR4ONWY:U9IM8TAC Odbc driver returned an error (SQLDriverConnectW). State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused. [nQSError: 43001] Authentication failed for Administrator in repository Star: invalid user/password. (08004) Error Codes: . Error Codes: AGEGTYVF +++ ThreadID: 13ac
I have followed all the steps mentioned in the material but i dont know what went wrong, if possible can anyone mention the series of steps to configure the BI scheduler.
Thank you,
Sudhakar

Did you try looking at the Administrator username and password in the Job Manager Configuration screen?
The error message "Authentication failed for Administrator in repository Star: invalid user/password" simply says that the userID and password do not match the same settings in the repository.
Refer to this thread
Could not create a Job with BI Scheduler
Thanks
Venkat krishna
Edited by: Venkat Krishna on Feb 8, 2011 10:22 AM

Sequence of steps n Material quantity calculation functionality

Hi, Pls advise the sequence of steps involved in MQC functionality in Master Recipe? Thank You.

Hi Raju,
Below are the steps you can explore.
1. Assign Classification to component if you are using any batch classification values for calculation of other components. This you can do it in BOM section of Master recipe.
2. Now goto calculation tab for the component of which quantity calculation is required.
3. In this screen you can see the characteristic assigned for calculation in batch classification as per step 1.
4. You can insert simple calculation formula using reference of these cells. The reference is simple like the references we have in excel. For example (001; 002) this given you value in 1st column & 2nd row.
5. At the time of batch determination or quantity change in Process order please make sure to click on Calculation tab & then save. This is required to get the quantity calculated as per formula.
Hope this will help you.
Please let us know the industry you are working in. This will help all to help you better.
Regards,

Doubt in sequence of steps in configuration of Insurance Benefits Plan..

Similar Messages

Maybe you are looking for