Down Payment Request--URGENT

I need to configure down payment request in OBXR for various down payment accounts for customers. In SAP we have F as special gl indicator for down pament requests. I have about 4 to 5 customers with different recon accounts. Some of the customers with common recona ccount need to be assigned different liabilty account. In down paymetn request, when I create anotehr gl indicator for eg. 1 or G and check mark on noted items in properties I get teh message that only F special indicator is for down paymetn requests. How do I create otehr special indicators for down payment requests because the system does not let me create any other specail gl indicator. I checked in OBXB where F is set up as special gl indicator for down pmt request. There is no button to add more special gl indicators there.
Please help me with this. THis is urgent. Thanks
Lakshmi

The confusion here is that you are trying to create a new Down Payment Request Special GL indicator. You do not need this. What you need to create is a new Down Payment GL Indicator.
Remember when you do a down payment request (special GL F), the system does not post to any reconciliation account. It is just a noted item. It is only when the down payment is made that the system posts an entry to a provisional liability (usually special GL A).
If you want to accomplish the above issue, you can create Special GL items (just like A) but do NOT make them noted items. Only F should be a noted item. Then link these new Special GLs to Special GL F, in the field Target Sp GL ind. Then you can attach the new codes to the different reconciliation accounts that you want.
Special GL F can still remain on the original reconcilation account, as said above no postings are made when you do a Down Payment Request.

Similar Messages

Creating Down Payment Request using BAPI_ACC_DOCUMENT_POST (URGENT!!)

Hi...
I have a posting unanswered.
Please take some care about it... ^^
Making Down Payment Request using BAPI_ACC_DOCUMENT_POST

Hi,
Just in case you found this thread with the same problem.
At least in my case what was happening is that I wanted to leave the currency fields blank (the same currency as payment value) but I was filling in ACCOUNTPAYABLE-PYMT_AMT, so was receiving error telling me that currency fields could not be empty. And if I set them to the same as payment, I would receive a message telling me that currency must be different.
If you want to use only one currency you don't need to fill in these 3 fields:
ACCOUNTPAYABLE-PYMT_AMT
ACCOUNTPAYABLE-PYMT_CUR
ACCOUNTPAYABLE-PYMT_CUR_ISO
The same probably applies for the ACCOUNTRECEIVABLE table.
Cheers,
Erick
Ps.
Some extra text so you can find this thread by searching for error messages:
Required field CURRENCY was not transferred in parameter ACCOUNTPAYABLE
For the ISO code there is no unique SAP currency code for ALE
For the ISO code there is no unique SAP currency code for ALE
    Message no. B1888
Diagnosis
    There are several entries in TCURC for this ISO code, but none with the
    primary flag set.
Procedure
    In table TCURC set the primary flag for ISO codes used multiple times.
Required field CURRENCY was not transferred in parameter ACCOUNTPAYABLE
    Message no. RW602
Diagnosis
    Field CURRENCY is required in parameter ACCOUNTPAYABLE for processing
    the document. The document is incomplete without this field.
System Response
    The document cannot be processed.
Procedure
    Enter a valid value in field CURRENCY in parameter ACCOUNTPAYABLE.

BELGIAN DOWN PAYMENT REQUEST --Need a feedback experience URGENT

Hi all,
The case concerns the down payment request in a belgian company code:
1/ The process begins with the posting of a FAZ document type from SD module (through transaction VF01) => Therefore a down payment request is posted in FI with special G/L account "F". This document is a statistical document.
2/ But in the belgian legislation this statistical document should be in program RFUMSV00 and therefore the VAT must be declared.
I found a program(RFUMSANF that SAP developped to create another document in reference of the down payment request document issued from SD but with a different numbering. The fiscalist told me that he can't accept because the belgian legislation said that it's the down payment request number that must appear in the declaration and in the solution provided by SAP we're obliged to create a new document number => Therefore there is a gap in the sequential numbering generated from SD.
If you have already faced this problem, thanks for telling me what were your answers and what kind of solutions have you implemented to solve this problems.
I take any help.
Thanks a lot for your help.

Hi,
The concept of Downpayment is to have the advance payment received booked in the system by creating a downpayment request/invoice.
In your case the Downpayment Request is 100%, so it becomes difficult to apply the same to the Invoice in the Payment window.
Through Internal Reconciliation window, the same cannot be reconciled. Check Note no. : 1340606 regarding the system behavior.
The following options can be checked in the COPY of the database :
1) Option of applying the Downpayment Request and the Invoice and making a payment of 0.01 cent and then transfering the same to the Rounding account.
2) Checking the option of AR Reserve invoice in case there is 100% Downpayment.
Please check and consult the account of the company.
Kind Regards,
Jitin
SAP Business One Forum Team

Settlement of the Final Balance Payment against the Down Payment Request

Hi,
How can I settle the Final Balance of a Vendor in SAP against the Down Payment Made under a PO Based Invoice. For Eg. - I have raised a PO of $10000.00 and made a Down Payment Request and Posted it through the APP for $ 300.00 the final balance under the FBL1N displays as $ 9700-, but the ZP Doc Types for Vendor Payment of Down Payment also appear in the Open Items and Status shown is in RED Colour and not in GREEN Colour and does not appears under the Cleared Items. Under the Cleared Items I am able to view the Original Down Payment Requests which I posted through Transaction F-47.
I am unable to settle this Final Balance of $9700 against the Down Payment under the Vendor Account on the basis of a PO Based Invoice.
Can some one please help me urgently on this.
Thanks in Advance.
Regards,
Pankaj.

Dear,
The same requirements possible after implement EHP4 Package upgrade.
Regards,
Kishore

CO Object Assignment Error while posting Down Payment Request

User is raising a Down Payment Request for the purchase of an Asset through a Purchasing Document. This Asset Master has got the cost center and WBS Element assigned in it.
System while saving the DP Request is throwing an error that CO Account Assignments has different Profit Centers
I have also checked the cost center master but the profit center assigned there is correct only. Should I check the OKB9 settings ? If yes, for which GL Account do I need to check ? Where else can I check the CO Object Assignments for profit centers ?
Requirement is critical. Please help.
Thank you
Ravi
9849393564

Hi,
Good evening and greetings,
Please have a look in GGB1 (Profit Centre Substitution), there may be some rule which is overriding the OKB9.
Please reward points if found useful.
Thanking you,
With kindest regards,
Ramesh Padmanabhan

Vendor down payment request over PO value

Hi All,
I have a requirement for vendor down payment request amount compare to PO value checking.
I have PO with total value - 600 USD.
When I create down payment request using F-47, I input amount 1000 USD.
The system never show me any message.
I want the SAP to block me from posting down payment request over PO value.
I've read in the forum, to change message type F5373 with error type. But the message never appear in my F-47 screen.
Anyone can help me, what am I missing here ?
Thanks,

Hi,
You are right about message F5 373. But this is applicable at the time of the Payment of the Advance i.e. F-48. It is not available at the time of creating the Advance Payment Request against T Code F-47.
If you want to have this control in the Payment Request, then you will have to use the validation, which you can put with the help of your abaper.
Regards,
Amit

Vendor down payment request Error

Hi all,
i created a vendor down payment request using f-47. I had created a tax code for the country "AE" using FXTP. But when in the vendor down payment request it is not picking the tax code,giving the error "Tax code AN for country AE has been deleted or incorrectly changed", Message no. FS201
Kindly help me,
Thanks in advance
Ani Varghese

Hi,
The reason behind this error is that the TAX CODE IS NOT CORRECTLY MAINTAINED.
You might not have maintained the GL Accounts for this. Maintained it in OB40.
Regards,
Amit

Vendor Down payment request

Hi,
I have 2 queries regarding vendor down payment request F-47
1) Want to create DPR on header level (We have ECC.6 No enhancement package)
2) When I create DPR on item level of more then item value it will stop me & show error but when ever I will create multiple request of same line item with actual amount or less amount (but more then actual amount in total) will be not stop me.
I already active F5 373 message into error.
Thanks,
Farrukh khan

Hi,
You are getting this error becausea either you have giving more amount than the PO value or GRN and IV has already been created for this item.
You are requested to do create DPR as per below given screen shots
Press Enter
Click on
Hope, this solves your issue.
Regards,
Tejas

Vendor Down Payment Request on WBS (F-47)

Dear Fellows:
I have came across a problem that while creating a Vendor Down Payment request (T.code: F-47) on WBS, my system is not stoping me over budget exhaust. I have Budget of 100 and i create request for 101, system allows it and post the document.
Vice Versa if i create a Vendor Down Payment request over Commitment iten, then system check the budget and generates message.
any good solution to it would highly be appreciable.
Regards.

Hi,
The budget availability check is done only against the assigned values and
Following entried does not contribute to the Assigned value
    V: Value type not relevant (<> Act./Plan/Stat.Act./Stat.Plan/Commt)
    D: Delivery
    S: Settlement to object with no budget control
    R: Revenue cost element
    C: Cost element is exempt cost element
    M: Minimum from actual + commitment and plan per order value update
    P: Plan value is not on apportioned order / network
    B: Plan Costing Single Position
    S: Funds Commitment in Balance
So the down payment is not covered for the calculation of the assigned value.
Hence no check is carried out for the Availability check.
hope its useful.
Reward points if useful.
Thanks..

Vendor down payment request to MM purchase order

We want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
Thanks
Martien
Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

Dear Martien,
we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
We are doing a workaround:
We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
If you find a other solution, so please tell me.
Best regards.
Manuel

Down payment request to the purchase order as a whole for f-48

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Actually looking for any screen exit is available for that or any other way.
Regards
RK

Check for FI user exits in this link
http://wiki.sdn.sap.com/wiki/display/ERPFI/UserExitsin+FI
Check also this links
USer Exit / Badi F-47 & F-59
http://wiki.sdn.sap.com/wiki/display/ABAP/Find%2bApplication%2bclass%2bwith%2bExits%2band%2bBadis%2bfor%2ba%2bTransaction
Edited by: Jeyakanthan A on May 25, 2010 1:03 PM

Down payment request to the purchase order as a whole

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Regards
RK

Hi
Actually looking for any screen exit is available for that or any other way
Rgs
RK

Down Payment Request for a Purchase Order Type K

I am making a down payment request to a supplier where the purchase order is of type K.
At the time of recording the payment request (A-47) the transaction meets the cost center of the purchase order and, because of having a message class (KI 281), blocks the release.
The question is:
At present the validation of the message class (OBA5) should validate the account of the purchase order or the supplier's account of the F-47?
Rgs,
Ivair

Hi
KI 281 message says that the GL account has to be created as a cost element. So, please create a cost element for the GL you are using (KA01). Hope this is the problem.
If this does not work, please let me know.
Thanks,

Down payment request based on purchase order

Dear all,
How to make down payment request(F-47) based on purchase order(not line item wise) ?,
Currently in F-47 it is asking to enter amounts purchase
order line item wise,because downpayment is made only for entire purchase order value not line item wise.
How to solve this issue ?
Jeyakanthan

Hi,
This is SAP standard functionality. you have to specify line item, though you specify line item system will check for whole PO. and while posting invoice you will get information of the down payment.
Regards,
Raj

Payment program - down payment request

Hello,
1) Down payment request is saved with the house bank entered
2) Payment is posted in F110 (in the payment proposal house bank is displayed)
3) While displaying payment document house bank field is empty.
Why house bank is not copied from down payment request to payment...
Thanks
Karol

Hi,
House can be maintained at vendor master level only.
Still if you want to see the check information / bank information go to FB03 and enter doc no, comp code, FY and press enter
Go to menu item -> environment->check information.
So here you will get all the data about the house bank and check data.
Hope this will help you for some extent.
Thanks,
Srinu

Down Payment Request--URGENT

Similar Messages

Maybe you are looking for