Downgraded ATI drivers but cannot find Kernel version
After a recent upgrade to kernel 2.6.39 and ATI catalyst 1.6 drivers, I am getting worse performance.
I have downgraded catalyst-utils to 11.4 but cannot downgrade the catalyst driver to 11.4 as it requires a
kernel <2.6.39
[root@orac boot]# pacman -U /var/cache/pacman/pkg/catalyst-11.4-1-i686.pkg.tar.xz
warning: downgrading package catalyst (11.6-1 => 11.4-1)
resolving dependencies...
warning: cannot resolve "kernel26<2.6.39", a dependency of "catalyst"
:: The following package cannot be upgraded due to unresolvable dependencies:
catalyst
Do you want to skip the above package for this upgrade? [y/N]
error: failed to prepare transaction (could not satisfy dependencies)
:: catalyst: requires kernel26<2.6.39
My problem is I dont know how to find the Arch 2-6.38.4 kernel (or previous version).
The kernel name always appears as kernel26, so how do I find a particular version?
I have the old 2.6.38 modules in /lib/modules
[root@orac pkg]# ls /lib/modules/
2.6.38-ARCH 2.6.39-ARCH fglrx fglrxold
but do not have 2.6.38-ARCH in /var/cache/pacman/pkg
Thanks in advance
Last edited by hal8000 (2011-06-17 17:27:12)
I use Catalyst 11.4 with kernel 2.6.39, but instead of catalyst I use catalyst-hook to build the fglrx module after kernel updates and it works perfectly.
$ uname -sr
Linux 2.6.39-ARCH
$ pacman -Qs catalyst
local/catalyst-hook 11.4-1 [3.15 MB]
AMD/ATI drivers. Auto re-compile the fglrx module when kernel update
(mkinitcpio's hook)
local/catalyst-utils 11.4-1 [70.30 MB]
AMD/ATI Catalyst drivers utilities and libraries.
Last edited by Dastingo (2011-06-17 18:30:00)
Similar Messages
-
I am using a Palm Pilot still for several purposes, and the desktop version can run om my Mac OS X 10.6.8, but I cannot find a version thjat runs on OS X Mavericks, which prevents me from upgrading as my PalmPilot is storage for vital info. Any solution?
Thank for for your suggestions. Unfortunately they are of little help. I am running on Snow Leopard and the PalmDesktop works fine. However, I do not want to quit my PalmTungsten unit as it is my backup for all my important access information. If it cannot run on Mavericks and no other solution is at hand, I simply will not update my OS X, but work on my Snow Leopard as it is.
I do not know how on earth I can migrate the information from my Palm into another system, and then quit the PalmPilot. If you have any intelligent solutions to this I would appreciate an input. A manual copy and paste solution is not acceptable. I may however run it on Windows via Parallel Desktop, but it is a lousy solution, and demonstrates (again) the weakness of Apple's OS and lack of compatibility. I am not impressed by the OS X performance.
Thank your for your attention. -
I want to re-install Premiere Elelments 8, but cannot find downloads for version 8. I have the serial no. Where can I download the files for version 8?
Hi Jeff. I did purchase Premiere Elements 8 from Adobe (download version), but couldn't find the files to download again on the adobe.com website. I did, however carry out another search of files from my old PC and eventually found the files to reinstall on my new PC, using my registered product serial no. Installation has worked. It seems that Adobe has stopped supporting version 8 as I could only find version 9 and later for download from the adobe.com website.
Thanks for your prompt reply -
Hi all, I would like to trial Lightroom6, but the standalone version, not CC. I cannot find this version to trial. For that matter, I cannot find the standalone upgrade version to buy! Please point me in the right sirection - thanks
There is no specific trial that is named Lightroom 6. The only trial available is the Lightroom CC trial. That's the only trial.
If you choose to buy, you can buy Lightroom 6, with no Creative Cloud component, from Products (scroll down to LR 6) -
i have a new computer and downloaded the latest version of itunes.I now need to authorise my computer but cannot find the bar that contains " store windows help" any suggestions please?
Press Alt or Ctrl+B.
tt2 -
Please help! - I need to upgrade to OSX version 10.6.8 or later but cannot find the download anywhere?
10.6.8 requires 10.6 some version to be installed in the first place. Stedman's link will give you 10.6.3 retail which should work with the machine in your signature. If you need the 10.6.8 update, see: http://support.apple.com/kb/dl1399
If you need 10.7 or above, read this tip first:
https://discussions.apple.com/docs/DOC-6271 -
My MBP has Mountain Lion installed. The iPhoto version is 8.1.2. Cannot install iPhoto 9.4 without installing 9.0, but cannot find 9.0. Solution, please.
If you're running Mac OS X 10.8.x ou can purchase iPhoto version 9.x from the App Store. If you purchase iPhoto at the App Store you will automatically get the most up-to-date version and you won't need to install the 9.4 update.
-Doug -
I have Adobe Design Standard CS6 purchased 2013 with serial number but cannot find to download it onto a new mac laptop. When I try and add the 24-digit serial number to my account it doesn't seem to work?
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html -
Where can I find the pathway to upgrade my 6.1 iMac to the Lion 7.1 and then to the Montian Lion 10.1. I think I have to update to Lion before I can update to montian Lion but cannot find the upgrade to take me from 6.1 to 7.1
What are we talking about here? You've posted in a Windows forum, but seems you are referring to an iMac. But you are not referring to OS X version numbers. Maybe you should make clear what you want.
-
I have been working on a project on final cut pro trial, just purchased the real deal, but cannot find a way of importing the project
You don't import the project.
I'm going to assume that both the trial version and purchased version were 10.1.
Open FCPX and then Open Library>Other, Navigate to wherever you stored the library (ies) you worked on when you used the trial. Choose that library and your work should be in one or more events in it.
Russ -
I downloaded Dreamweaver CC 2014.1, started using it but cannot find Show Fluid Grid Layout Guides button, Resize LI.link sizing handle and 'move up a Row' arrow. Where can I find them?
You have the latest version (CC 2014.1 or 2014.1.1) in which the interface condenses Design View with Live View buttons in normal layouts. See screenshot.
However, in FGLayouts, Live View is the only option which poses some editing problems and has been highly criticized.
Is there any way to display the Design View in fluid grid pages?
New Features in CC 2014.1 October Release
http://helpx.adobe.com/dreamweaver/using/whats-new.html
New Features in CC 2014.1.1 February Release
https://helpx.adobe.com/dreamweaver/using/whats-new.html#Enhancements%20to%20Live%20View%2 0editing
You can disable this restriction by adding an X to the FGLayout CSS.
Dreamweaver Fluid Grid Properties
dw-num-cols-mobile: X 4;
dw-num-cols-tablet: 8;
dw-num-cols-desktop: 12;
dw-gutter-percentage: 25;
=====================================
Having said that, it might just be simpler to revert to an earlier version. Log-in to Creative Cloud Desktop app. Go to Filters & Versions > Previous Version. See screenshot.
Nancy O. -
Attempting to install cs6 extended on my windows 7 professional 32 bit laptop, ive downloaded it but when i go to install it it asks for my serial number which i put in and then it tells me it is a valid number but cannot find a qualifying product on this computer?? What is the problem?
Normally you will be asked to provide the new prdouct serial number first, then when a qualifying version is not found you elect to provide that information and then select the version and provide its serial number. If this is not how things are flowing for you then you should contact Adobe support directly thru chat and get their help resolving it.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
ATI drivers won't compile kernel modules, what other options?
Just building my first Arch build on my desktop, I've got XFCE working, and ALSA (Finally after some troubleshooting and tweaking), but now I'm up to video drivers.
I've just found out the hard way that FGLRX will not compile, I'm assuming because ATI drivers do not support Kernel 3.1.1. So I got rid of FGLRX and the ATI configuration tools. But now I have a dual head display, running on ati-dri (which I assume is just your run of the mill basic driver for ATI cards) and I'm a bit lost on what to look into in terms of using the 3D power of my ATI 4870, and also to set up my dual head displays, on other distros I used to just use the ATI tool and it wrote an xorg file for me, but now I've just got a cloned display.
Halp?Thank you tomk, sorry to have wasted a thread on something that I could of found in the wiki, I'll keep it in mind next time.
Going with the easiest and fastest option seeing as all options will give the same end result, that being using the unofficial catalyst repo. From what I understand the Arch wikis are frequently updated, so that method should work with the 3.1.1 kernel, correct? -
I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?
Open AirPort Utility. The first screen looks something like this:
Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
If you do not see these screens, you will need to start over and configure your AirPort again. -
My iPod 5th gen will not completely turn on it shows the apple symbol then shuts off I have restarted it and tried to plug it into my computer but cannot find it to restart it
Its been like this for awhile and I can not fix itTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
When trying to upgrade and install OS X Mmavericks to my Macbook Pro as it started to install the computer stopped the install and now is stuck with the OS X Mavericks intall window showing and I can't get out of it or force quit? I can not do anythi
-
Hello, I am unsure if this is a bug or how I'm doing things. I'm using version 4.1. I am creating a master/detail report (on the same page) using the wizard to create the page. I have no problem creating the page and it works. The only changes I make
-
Not responding before press and hold any key
I have to press and hold any key on my blackberry 8520 before it response. This started after downloading some app from the appworld. If I leave the phone for one minute idle and gets a call, I have to press and hold the send key for about 30 seconds
-
FC Server and "Managed Copy" of Asset
I'm new to FC Server. Simple question. My colleague put prores assets on our FC Server. I need to get at them to edit on my Mac, remotely. Do I cache and check them out? Or do I just copy them over to my computer to edit with? It's just he and I as F
-
Table control in lsmw tcode me01
MY requirement is develope an object in lsmw recording method for tcode me01 . this tcode has a table control . how to handle the table control and what will be the logic for that . where to write the logic? the source file is one only . please help