Download file from SAP PLM or Content Server?

Hi all,
I learned that the VEG server download the originals from content server and then started the conversion process.
In my case, I have an error below, it is strange that the IP 153.95.192.93:443 is the ip of SAP PLM server, can anyone tell me is my configuraton right?
thanks
Job 42 (Workflow 'KPRO Retrieve') report
Startup Parameters
     FilesPerTask = '5 '(Integer)
     InputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB41 \ KProRetrievalRequest.xml' (String)
     OutputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB41 \ KProRetrievalResponse.xml' (String)
Step 'validate input'
   Completed Action 'enter a valid'
Step 'Download'
   CompletedWithWarnings Action 'can not download all the files'
     Info Message 'document retrieval tasks to be addressed: 1'
     Warning Message 'first task failed to retrieve a file (of 1): Unknown error (warning)'
       jmp_KproRetrieve (Task 39)
       Warning Message 'file' A00021876_20130819.CATProduct 'unable to download: Unable to connect to the remote server: Since the connected party did not properly respond after a period of no response or a host connection, the connection attempt fails. 153.95.192.93:443 '

HI Fergal.
I changed the IIS port to XX443(XX means instance number), the https service is also started in the ECC server.
but I got below errors:
Startup Parameters
     FilesPerTask = '5 '(Integer)
     InputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB115 \ KProRetrievalRequest.xml' (String)
     OutputFilePath = '\ \ NBHXVEG02 \ DSShare \ Workspace \ JM_JOB115 \ KProRetrievalResponse.xml' (String)
Step 'validate input'
   Completed Action 'enter a valid'
Step 'Download'
   CompletedWithWarnings Action 'can not download all the files'
     Info Message 'document retrieval tasks to be addressed: 1'
     Warning Message 'first task failed to retrieve a file (of 1): Unknown error (warning)'
       jmp_KproRetrieve (Task 122)
       Warning Message 'file' A00021876_20130819.CATProduct 'unable to download: The underlying connection was closed: Could not establish trust relationship for the SSL / TLS secure channel. : According to the verification process, the remote certificate is invalid. '

Similar Messages

How to store multiple files from SAp in to Application server?

Hi Guys,
             Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
            Any Logic or Code for how to do is welcomed.
                    plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
        DIRNAME(200)     TYPE c, " name of directory.
        sp_name(100)     TYPE c," name of entry. (may end with *)
      END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
        dirname(75) TYPE c,            " name of directory.
        aliass(75) TYPE c,            " alias for directory.
        svrname(75) TYPE c,            " svr where directory is availabl
        sp_name(75) TYPE c,            " name of entry. (may end with *)
        sp_cs(10)   TYPE c,            " ContainsString pattern for name
      END OF isearchpoints.
data: l_file type filetable.
data: l_rc   type i.
data: itab   type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat      type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = in_file
   "FILETYPE                      = 'BIN'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = ' '
   HEADER_LENGTH                 = 0
   READ_BY_LINE                  = 'X'
   DAT_MODE                      = ' '
TABLES
    DATA_TAB                     = itab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
     TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
    move g_tmp_file_path to in_file.
    h_destin = ''.
    SPLIT g_tmp_file_path at '\' into table itab.
    loop at itab into g_tmp_file_path.
      h_destin = g_tmp_file_path.
    endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies    TYPE TABLE OF dfies.
DATA: lwa_dfies   TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
    EXPORTING
      tabname    = '/BI0/PCO_AREA'
      lfieldname = 'CO_AREA'
    IMPORTING
      dfies_wa   = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT   = 'Destination directory'.
lwa_dfies-LENG      = 100.
lwa_dfies-INTLEN    = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      RETFIELD = 'SP_NAME'
      DYNPPROG = SY-REPID
      DYNPNR = SY-DYNNR
      DYNPROFIELD = 'destin'
      VALUE_ORG = 'S'
    TABLES
      VALUE_TAB = searchpoints
      FIELD_TAB = lt_dfies
    EXCEPTIONS
      PARAMETER_ERROR = 1
      NO_VALUES_FOUND = 2
      OTHERS = 3.
*&      Form select_input_file_name
*       text
form select_input_file_name.
* call function 'F4_FILENAME'
*       exporting
*            program_name = sy-repid
*            dynpro_number = sy-dynnr
*            field_name    = 'PATH'
*       importing
*            file_name     = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    "select_input_file_name
*&      Form WRITE_DB_HOME
*       Write DB home directory
*       no parameters
FORM write_db_home.
CASE sy-dbsys(3).
    WHEN 'ORA'.
      CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
                         ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ORAHOME',       30 searchpoints-dirname.
      MOVE: 'DIR_ORAHOME'        TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'ADA'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_ADA_DBROOT',    30 searchpoints-dirname.
      MOVE: 'DIR_ADA_DBROOT'     TO searchpoints-sp_name.
      APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'INF'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
                      ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
*      PERFORM flip_flop(rsora000) USING cflag.
*      WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
      MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
      APPEND searchpoints..
*--- C5056155 End   of ALV -------------------------------*
    WHEN 'DB6'.
      CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
                      ID 'VALUE' FIELD searchpoints-dirname.
      IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
*        PERFORM flip_flop(rsora000) USING cflag.
*        WRITE: / 'DIR_DB2_HOME',    30 searchpoints-dirname.
        MOVE: 'DIR_DB2_HOME'       TO searchpoints-sp_name.
        APPEND searchpoints.
*--- C5056155 End   of ALV -------------------------------*
      ELSE.
        EXIT.
      ENDIF.
    WHEN OTHERS.
      EXIT.
ENDCASE.
ENDFORM.                    " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = sy-uname.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
    WHERE svrname = 'all'.
    MOVE isearchpoints-dirname to searchpoints-dirname.
    MOVE isearchpoints-aliass to searchpoints-sp_name.
    APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL'         TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB'      TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME'           TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
    PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
    PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING'         TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT'            TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF'           TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS'     TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG'          TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN'           TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
    DATA: windir_path(64), programfiles_path(64).
*   hoping that ProgramFiles is set in service user environment
    CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
                    ID 'VALUE' FIELD programfiles_path.
    IF programfiles_path IS INITIAL.
*     %ProgramFiles% not available. guess from windir
      CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
                      ID 'VALUE' FIELD windir_path.
*     e.g. S:\WINDOWS ==> S:\Program Files
      CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
    ENDIF.
    CONCATENATE programfiles_path '\SAP\hostctrl'
                                             INTO searchpoints-dirname.
ELSE.
*   on UNIX, the path is hard coded
    searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
                     ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
    IF sy-opsys = 'Windows NT'.
      searchpoints-dirname = '.\'.
    ELSE.
      searchpoints-dirname = './'.
    ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS'       TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP'        TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE'         TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP'           TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS'          TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES'        TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
                     ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB'          TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
                     ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
    h_ind = sy-tabix.
    IF searchpoints-sp_name IS INITIAL.
      DELETE searchpoints INDEX h_ind.
    ENDIF.
ENDLOOP.
ENDFORM.

Downloaded file from SAP to excel 2007(*.xlsx, *.xlsm) - unable to open

Hi All,
I am downloading a data from SAP to excel(*.xlsx) format. I am able to conver/download the file in *.xlsx format, but if try to open the downloaded excel file, it gives teh error message 'Excel cannot open the file 'filename.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file'. with a OK button. When I press the OK button, no data is displayed.
So kindly let me know how to download the file from SAP to *.xlsx format without any errors.
Note: I am able to download the data in *.xls format without any erros.
Thanks in advance,
Regards,
Vijay

Hi,
You are probably not being able to open the file of .XLSX format because you do not have Microsoft Office 2007 installed on your system. You might be having a lower version of Microsoft Office. e.g. 2003.
What you can do is, before opening the .XLSX file directly on a system which does not have Microsoft Office 2007, you can convert it into .XLS format and then open the same.
See the below code.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_COPY
EXPORTING
    SOURCE               = 'C:\Users\Danish\Desktop\test1.xlsx'
    DESTINATION          = 'C:\Users\Danish\Desktop\test2.xls'
EXCEPTIONS
    CNTL_ERROR           = 1
    ERROR_NO_GUI         = 2
    WRONG_PARAMETER      = 3
    DISK_FULL            = 4
    ACCESS_DENIED        = 5
    FILE_NOT_FOUND       = 6
    DESTINATION_EXISTS   = 7
    UNKNOWN_ERROR        = 8
    PATH_NOT_FOUND       = 9
    DISK_WRITE_PROTECT   = 10
    DRIVE_NOT_READY      = 11
    NOT_SUPPORTED_BY_GUI = 12
    OTHERS               = 13.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Danish

Transfer files from SAP R/3(unix server) to windows

Hi TechGurus,
We have a requirement where in , we are extracting data from SAP table into a text file using OPEN DATASET in TEXT MODE.
Then using a third party tool (Connect-direct), we are transferring text files to windows server using unix script, in binary mode.
The problem is that that the data is being transferred in blocks,each time beginning transfer from a new line.That is, after say transferring 25KB data it transfers next 25KB data from a new line. What happens as a result is that records
after particular amount of data is broken and remaining data transfer begins from new line.
The file size is around 25 MB.There is no such problem while transferring file of size 10 KB.
We are uploading the data from text file on windows server into MSAccess.
And error occurs during this process.
Assured points for helpful answers
Thanks in advance!!

Hi,
If you want to transfer file between different SAP servers then you can use the function module EPS_FTP_PUT. You need to have a RFC destination (with sufficient authorizations for the RFC user). The meaning of the importing parameters of the function module are quite obvious. Of course, SAP offers us more than this function module:
- EPS_FTP_GET
- EPS_FTP_MPUT
- EPS_FTP_MGET
Kishi.

Can't copy file from SAP-directory to FTP server

Hello,
I can't copy files from the SAP server to the FTP server. The file is created with OPEN DATASET and CLOSE DATASET commands and is placed in the SAP-directory S:\usr\sap\DEV\DVEBMBGS00\work.
I can see and read the file with transaction al11, so I know it's there.
But the FTP command always gives the same error:
S:\usr\sap\DEV\DVEBMBGS00\work\[FILENAME] errno 22: invalid argument
I can connect to the FTP, but the put command keeps failing. Somehow, the file in the SAP directory can't be read, it seems, even when
Any ideas?
Thanks in advance.
Dave

Ok, I found out that I have to use SAPFTPA as RFC destination type, instead of SAPFTP, otherwise the folders can't be located.
But with SAPFTPA I can't seem to connect to the FTP server. I've tested the connection with sm59 and it works, but for the FTP it doesn't work. When I use SAPFTP as destination type, it still works.
What can I do?
Thanks.

How to transfer file from sap server to PDM server using open FT??

Hello Sap Guru's
I want to Trasfer a file with all supplier information from SAP server to PDM server(Thirdparty) system Using Open FT ..How can I transfer ???
Please let me know the answer??
Thanks In Advance
Preethi

Hi Preethi,
I think it is not possible to transfer a file from SAP to PDM using open FT.
Using RFCs, we can do the transfer.
Other option is the file can be downloaded into UNIX. And from there using a shellscript we can transfer the file from UNIX to PDM or if your PDM has the option to grab the file from UNIX that will also work.
Hope this helps.
Please reward if helpful.
Thanks,
Srinivas

How to download files from Application Server of Unix o.s to local director

Hi All,
I am trying to download files from Apllication server of Unix operating Systems to local file in excel sheet format using a z-program.but whenever I am trying to use OPEN dataset ........
it is showing sy-subrc = 8.
Can I have any clew please.
Thanks in advance,
Regards,
AMEER.

Hi Sreekanth,
Thanks a lot for quick reply.I have to download that files from z-program only. I am giving you my code below.
*& Report ZTRAK_DOWNLOAD                                         *
REPORT ZTRAK_DOWNLOAD MESSAGE-ID ZCT                   .
SELECTION-SCREEN BEGIN OF BLOCK DOWNLOAD WITH FRAME TITLE TEXT1.
PARAMETERS :
       SERDIR LIKE RLGRAP-FILENAME DEFAULT '/usr/trak',
       LOCDIR LIKE RLGRAP-FILENAME DEFAULT 'C:\Trak'.
SELECTION-SCREEN END OF BLOCK DOWNLOAD .
SELECTION-SCREEN BEGIN OF BLOCK INFO2 WITH FRAME.
       SELECTION-SCREEN COMMENT 1(79) TEXT2.
       SELECTION-SCREEN SKIP.
       SELECTION-SCREEN COMMENT 1(79) TEXT3.
SELECTION-SCREEN END OF BLOCK INFO2 .
SELECTION-SCREEN BEGIN OF BLOCK INFO3 WITH FRAME.
       SELECTION-SCREEN COMMENT 1(79) TEXT4.
       SELECTION-SCREEN SKIP.
       SELECTION-SCREEN COMMENT 1(79) TEXT5.
        SELECTION-SCREEN SKIP.
       SELECTION-SCREEN COMMENT 1(79) TEXT6.
       SELECTION-SCREEN SKIP 1.
       SELECTION-SCREEN COMMENT 1(79) TEXT7.
       SELECTION-SCREEN SKIP 2.
       SELECTION-SCREEN COMMENT 1(79) TEXT8.
SELECTION-SCREEN SKIP 1.
       SELECTION-SCREEN COMMENT 1(79) TEXT9.
SELECTION-SCREEN END OF BLOCK INFO3.
*- Internal Table to output data in Excel
DATA: BEGIN OF tab_excel OCCURS 0,
        col1(50),
        col2(132),
        col3(255),
        col4(100),
        col5(100),
        col6(50),
        COL7(60),
        col8(30),
        col9(30),
        col10(30),
        col11(20),
        col12(15),
        col13(15),
      END OF tab_excel.
DATA: FILE LIKE RLGRAP-FILENAME .
DATA: W_DATASET(80).
INITIALIZATION.
TEXT1 = 'Download Reports'.
TEXT2 = 'The Program downloads the reports generated by Trak'.
TEXT3 = 'Utility from Server to Local PC.'.
TEXT4 = 'Check the following before executing the Program.'.
TEXT5 = '     1. A valid Server path is provided.'.
TEXT6 = '     2. A valid Local PC path is provided.'.
TEXT7 = '     3. Local PC has 10 MB free space.'.
TEXT8 = 'The report can be executed in the forground.'.
TEXT9 =
'The report should be executed after execution of Transaction TRAK'.
AT SELECTION-SCREEN.
IF SERDIR EQ ''.
MESSAGE E001(ZCT).
ENDIF.
IF LOCDIR EQ ''.
MESSAGE E002(ZCT).
ENDIF.
START-OF-SELECTION.
Download ABAP Development Summary Report
FILE = '\ABAP_Report_Developments.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAP_Report_Developments.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download BDC Development Report
FILE = '\BDC_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/BDC_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Development Summary Report
FILE = '\Developments_Summary_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Developments_Summary_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Enhancement Development Report
FILE = '\Enhancement_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Enhancement_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download field exit Development Report
FILE = '\Field_Exit_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Field_Exit_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Frequency & Purpose Report
FILE = '\Frequency_And_Purpose_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Frequency_And_Purpose_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Group Developments Report
FILE = '\FunctionGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Function Module Developments Report
FILE = '\FunctionModule_Developments_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionModule_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
FILE = '\Include_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Include_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download UserGroup Developments Report
FILE = '\UserGroup_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserGroup_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Modified_Standard_SAP_Objects_Report
FILE = '\Modified_Standard_SAP_Objects_Report.XLS' .
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Modified_Standard_SAP_Objects_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Include Developments Report
*FILE = '\Include_Developments_Report.XLS'.
*CONCATENATE LOCDIR FILE INTO FILE.
*W_DATASET = '/Include_Developments_Report.dat'.
*CONCATENATE SERDIR W_DATASET INTO W_DATASET.
*PERFORM INIT.
Download SAP Script Developments Report
FILE = '\SAP_Scipt_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/SAP_Scipt_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Transaction Developments Report
FILE = '\Transaction_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/Transaction_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download User Exits Developments Report
FILE = '\UserExits_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/UserExits_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download ABAP Query Developments Report
FILE = '\ABAPQuery_Developments_Reports.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/ABAPQuery_Developments_Reports.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
Download Functional Area Developments Report
FILE = '\FunctionalArea_Developments_Report.XLS'.
CONCATENATE LOCDIR FILE INTO FILE.
W_DATASET = '/FunctionalArea_Developments_Report.dat'.
CONCATENATE SERDIR W_DATASET INTO W_DATASET.
PERFORM INIT.
MESSAGE S003(ZCT) WITH LOCDIR.
END-OF-SELECTION.
This routine checks whether file exists if yes downloads it to
the Local PC
FORM INIT.
OPEN DATASET W_DATASET FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
   IF SY-SUBRC <> 0.
      EXIT.
   ENDIF.
   READ DATASET W_DATASET INTO tab_excel.
   APPEND tab_excel.
   CLEAR tab_excel.
ENDDO.
     PERFORM DOWNLOAD_FILE.
ENDFORM.
This routine downloads the data in an XL format on local PC
FORM Download_File .
CALL FUNCTION 'WS_DOWNLOAD'
            EXPORTING
                 FILENAME                = FILE
                 FILETYPE                = 'DAT'
            TABLES
                 DATA_TAB                = tab_excel
            EXCEPTIONS
                 FILE_OPEN_ERROR         = 1
                 FILE_WRITE_ERROR        = 2
                 INVALID_FILESIZE        = 3
                 INVALID_TYPE            = 4
                 NO_BATCH                = 5
                 UNKNOWN_ERROR           = 6
                 INVALID_TABLE_WIDTH     = 7
                 GUI_REFUSE_FILETRANSFER = 8
                 CUSTOMER_ERROR          = 9
                 OTHERS                  = 10.
    IF sy-subrc <> 0.
     message ''.       " Error in file transfer
    ELSE.
      CLEAR TAB_EXCEL.
      REFRESH TAB_EXCEL.
      FILE = ''.
      W_DATASET = ''.
    ENDIF.
ENDFORM.
I have created those files in Application Server running in another z-program in background mode.Then I am trying to download those files using above the program.I am creating those trak/Trak files manually and I can able to see those files in A.S level.But when downloading the same files I am facing the problem.
regards,
Ameer

How to download file from application server

Hi Experts,
              I developed report and execute in background mode. for this i used Open dataset transfer and close dataset . i got the requried output . But in this case user want downloaded file on presentation server so can anyone tell me How to download file from application server?
i know it is possible through Tcode CG3Y. but i want code in program.

This code will download a file to your Client package by package, so it will also work for huge files.
*& Report ZBI_DOWNLOAD_APPSERVER_FILE
REPORT zbi_download_appserver_file.
PARAMETERS: lv_as_fn TYPE sapb-sappfad
DEFAULT '/usr/sap/WBP/DVEBMGS00/work/ZBSPL_R01.CSV'.
PARAMETERS: lv_cl_fn TYPE string
DEFAULT 'C:\Users\atsvioli\Desktop\Budget Backups\ZBSPL_R01.CSV'.
START-OF-SELECTION.
CONSTANTS blocksize TYPE i VALUE 524287.
CONSTANTS packagesize TYPE i VALUE 8.
TYPES ty_datablock(blocksize) TYPE x.
DATA lv_fil TYPE epsf-epsfilnam.
DATA lv_dir TYPE epsf-epsdirnam.
DATA ls_data TYPE ty_datablock.
DATA lt_data TYPE STANDARD TABLE OF ty_datablock.
DATA lv_block_len TYPE i.
DATA lv_package_len TYPE i.
DATA lv_subrc TYPE sy-subrc.
DATA lv_msgv1 LIKE sy-msgv1.
DATA lv_processed_so_far TYPE p.
DATA lv_append TYPE c.
DATA lv_status TYPE string.
DATA lv_filesize TYPE p.
DATA lv_percent TYPE i.
"Determine size
SPLIT lv_as_fn AT '/' INTO lv_dir lv_fil.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
    EXPORTING
      file_name      = lv_fil
      dir_name       = lv_dir
    IMPORTING
      file_size_long = lv_filesize.
"Open the file on application server
OPEN DATASET lv_as_fn FOR INPUT IN BINARY MODE MESSAGE lv_msgv1.
IF sy-subrc <> 0.
    MESSAGE e048(cms) WITH lv_as_fn lv_msgv1 RAISING file_read_error.
    EXIT.
ENDIF.
lv_processed_so_far = 0.
DO.
    REFRESH lt_data.
    lv_package_len = 0.
    DO packagesize TIMES.
      CLEAR ls_data.
      CLEAR lv_block_len.
      READ DATASET lv_as_fn INTO ls_data MAXIMUM LENGTH blocksize LENGTH lv_block_len.
      lv_subrc = sy-subrc.
      IF lv_block_len > 0.
        lv_package_len = lv_package_len + lv_block_len.
        APPEND ls_data TO lt_data.
      ENDIF.
      "End of file
      IF lv_subrc <> 0.
        EXIT.
      ENDIF.
    ENDDO.
    IF lv_package_len > 0.
      "Put file to client
      IF lv_processed_so_far = 0.
        lv_append = ' '.
      ELSE.
        lv_append = 'X'.
      ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
          bin_filesize         = lv_package_len
          filename             = lv_cl_fn
          filetype             = 'BIN'
          append               = lv_append
          show_transfer_status = abap_false
        TABLES
          data_tab             = lt_data.
      lv_processed_so_far = lv_processed_so_far + lv_package_len.
      "Status display
      lv_percent = lv_processed_so_far * 100 / lv_filesize.
      lv_status = |{ lv_percent }% - { lv_processed_so_far } bytes downloaded of { lv_filesize }|.
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING          "percentage = lv_percent - will make it fash
          text = lv_status.
    ENDIF.
    "End of file
    IF lv_subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
"Close the file on application server
CLOSE DATASET lv_as_fn.

Error in PDF Conversion while downloading file from application server

Hi,
I am facing a problem in which i have to download file from application server which is a PDF file (output of SAP Script). I am downloading this file using following code in BSP technology:
* event handler for data retrieval
EMPCD = REQUEST->GET_FORM_FIELD( 'emp' ).
MONTH = REQUEST->GET_FORM_FIELD( 'mn' ).
YEAR = REQUEST->GET_FORM_FIELD( 'yr' ).
W_IND = 'N' .
DATA : wa_zform16 type zform16.
DATA : file_path type string.
DATA : l_pdf_len type string.
DATA STR TYPE STRING.
DATA: OUTPUT    TYPE STRING ,
      L_XSTRING TYPE XSTRING ,
      APP_TYPE TYPE STRING.
DATA: PDF_TABLE TYPE RCL_BAG_TLINE.
DATA PHY_NAME_OUT     TYPE SAPB-SAPPFAD.
concatenate '/usr/sap/put/form16/' EMPCD '_' YEAR '.PDF' into file_path
*PHY_NAME_OUT = '/usr/sap/put/form16/01000200_2007.PDF'.
PHY_NAME_OUT = file_path.
OPEN DATASET PHY_NAME_OUT FOR INPUT IN TEXT MODE ENCODING default.
IF SY-SUBRC IS INITIAL.
DO.
    READ DATASET PHY_NAME_OUT INTO STR.
    IF SY-SUBRC IS INITIAL.
      CONCATENATE
          OUTPUT
          STR
          CL_ABAP_CHAR_UTILITIES=>CR_LF
      INTO OUTPUT.
    ELSE.
      EXIT.
    ENDIF.
ENDDO.
APP_TYPE = 'APPLICATION/PDF'.
CALL FUNCTION 'SCMS_STRING_TO_XSTRING'
    EXPORTING
      TEXT     = OUTPUT
            MIMETYPE = 'APPLICATION/PDF'
*            MIMETYPE = 'APPLICATION/PDF;charset=utf-16le'
    IMPORTING
      BUFFER   = L_XSTRING.
CALL METHOD CL_BSP_UTILITY=>DOWNLOAD
    EXPORTING
      OBJECT_S            = L_XSTRING
      CONTENT_TYPE        = APP_TYPE
      CONTENT_DISPOSITION = 'attachment;filename=webforms.pdf'
      RESPONSE            = _M_RESPONSE
      NAVIGATION          = NAVIGATION.
Result of this code is : there is a pop up asking to open or save pdf format and process is complete, but i have problem in downloaded file.
At the time of creation i have put BMP image for signature in PDF file and it is working fine but when i upload that file in Application server and then download it with above used code it save the PDF file but when i open that file so whereever i have used signature that page gives error and could not display that scanned signature.
Can anyone please help me in this regard.
or is there any possibility from which i can download that file just like File transfer from BSP.
Keep in mind that i am using BSP technology so all GUI based function module to download file are not working.
waiting for your reply.....
Regards,
Gagan

Hi Raja,
I have standard sap form for TDS Certificate on which i have include an BMP image for digital signature and download that script into pdf format.While i download that PDF looks ok but it is not working in BSP.
Regards,
Gagan

Code to download file from server

Hi
I need some code to download file from a server to a local machine.
Can anybody help me, PLEASE
Yohan Shikari

If i try this :
try
//          path where the file is stord
//          String idocPath = config.getServletContext().getInitParameter("idocPath");
          String idocPath = "C:/";
          String fileName = "http://194.98.51.253/utimaco.cer";
          String filePath = idocPath + "\\" + fileName;
          response.setContentType("APPLICATION/OCTET-STREAM");
          String disHeader = "Attachment;Filename=" + fileName ;
          response.setHeader("Content-Disposition", disHeader);
          File file = new File(filePath);
          FileInputStream fileInputStream = new FileInputStream(file);
          int i;
          while ((i=fileInputStream.read())!=-1)
          response.getOutputStream().write(i);
          response.getOutputStream().flush();
          response.getOutputStream().close();
          fileInputStream.close();
          }catch(Exception e)
          e.printStackTrace();
I don't understand the "type variable" of response !!!
Thomas

[HELP] Download file from FTP server

hi,
I want to write a java program that can download and upload files from ftp server. Currently I only manage to upload a file to ftp server but i cant download file from ftp server. Here is the source code that only allow user to upload file. Anyone can give me some guidelines so that my program can download and also upload file? thx.
import java.io.*;
import java.net.*;
public class FTPUpload {
private static final int CTRLPORT = 21;
private static Socket ctrlSocket;
private static PrintWriter ctrlOutput;
private static BufferedReader ctrlInput;
private static byte[] localHostAddress;
public final static String DIR = "C:\\zip\\";
public static void main(String[] args) {
try {
String host = "192.168.1.1";
String loginName = "testuser";
String password = "password";
String dirName = "/home/testuser";
String fileName = "hello.zip";
ctrlSocket = new Socket(host, CTRLPORT);
localHostAddress = ctrlSocket.getLocalAddress().getAddress();
ctrlOutput = new PrintWriter(ctrlSocket.getOutputStream());
ctrlInput = new BufferedReader(new InputStreamReader(ctrlSocket.getInputStream()));
ctrlOutput.println("USER " + loginName);
ctrlOutput.flush();
ctrlOutput.println("PASS " + password);
ctrlOutput.flush();
ctrlOutput.println("CWD " + dirName);
ctrlOutput.flush();
ctrlOutput.println("TYPE I");
ctrlOutput.flush();
FileInputStream fis = new FileInputStream(DIR + fileName);
Socket dataSocket = dataConnection("STOR " + fileName);
OutputStream outstr = dataSocket.getOutputStream();
int n;
byte[] buff = new byte[1024];
while ((n = fis.read(buff)) > 0) {
outstr.write(buff,0,n);
dataSocket.close();
fis.close();
ctrlOutput.close();
ctrlInput.close();
ctrlSocket.close();
}catch (Exception e) {
e.printStackTrace();
private static Socket dataConnection(String ctrlcmd)
throws IOException,UnknownHostException {
String cmd = "PORT ";
ServerSocket serverDataSocket = new ServerSocket(0,1);
for (int i=0;i<4;i++) {
cmd = cmd + (localHostAddress[i] & 0xff) + ",";
cmd = cmd + (((serverDataSocket.getLocalPort())/256) & 0xff)
+ ","
+ (serverDataSocket.getLocalPort() & 0xff);
ctrlOutput.println(cmd);
ctrlOutput.flush();
ctrlOutput.println(ctrlcmd);
ctrlOutput.flush();
Socket dataSocket = serverDataSocket.accept();
serverDataSocket.close();
return dataSocket;
}

Or just use a java.net.URL("ftp://...) ..., get its input stream, and away you go ...

Download file from ftp server

Can I download files from an ftp server by simply using the ip address or https:// url? I've only gotten this to work by using the "ftp//:" address in previous projects and I'm not getting this to work in many different attempts.
Here is one...
# FTP Config
$FTPHost =
"10.10.10.5"
$Username =
"admin"
$Password =
"12345678"
$FTPFile =
"test.log"
# FTP Log File Url
$FTPFileUrl =
"ftp://" +
$FTPHost +
"/" +
$FTPFile
# Create FTP Connection
$FTPRequest =
[System.Net.FtpWebRequest]::Create("$FTPFileUrl")
$FTPRequest.Credentials
= New-Object System.Net.NetworkCredential($Username,
$Password)
$FTPRequest.Method =
[System.Net.WebRequestMethods+Ftp]::DownloadFile
$FTPRequest.UsePassive
= $false
$FTPRequest.UseBinary
= $true
$FTPRequest.KeepAlive
= $false
# Get FTP File
$FTPResponse =
$FTPRequest.GetResponse()
$ResponseStream =
$FTPResponse.GetResponseStream()
$FTPReader =
New-Object System.IO.Streamreader
-ArgumentList $ResponseStream
do
Write-Host
$FTPReader.ReadLine()
while ($FTPReader.ReadLine()
-ne $null)
$FTPReader.Close()
# Create FTP Connection
$FTPRequest =
[System.Net.FtpWebRequest]::Create("$FTPFileUrl")
$FTPRequest.Credentials
= New-Object System.Net.NetworkCredential($Username,
$Password)
$FTPRequest.Method =
[System.Net.WebRequestMethods+Ftp]::DownloadFile
$FTPRequest.UsePassive
= $false
$FTPRequest.UseBinary
= $true
$FTPRequest.KeepAlive
= $false
# Get FTP File
$FTPResponse =
$FTPRequest.GetResponse()
$ResponseStream =
$FTPResponse.GetResponseStream()
$FTPReader =
New-Object System.IO.Streamreader
-ArgumentList $ResponseStream
do
Write-Host
$FTPReader.ReadLine()
while ($FTPReader.ReadLine()
-ne $null)
$FTPReader.Close()

Hi!
You don't need to specifically use an IP address. E.g can use
$FTPHost = "myrandomserver.mycompany.com"
$Username = "admin"
$Password = "12345678"
$FTPFile = "test.log"
# FTP Log File Url
$FTPFileUrl = "ftp://" + $FTPHost + "/" + $FTPFile

Downloading file from application server to presentation server

Hi,
      We have a requirment to download file from application server to presentation server. The problem is while down loading, some of the filds showing some junk values. Instead of that junk values we have some Russian texts there. These Russian texts only coming as junk all other data is correct. The file in the appplication server is in .dbf format. We are downloading using WS_DOWNLOAD. file type is BIN and code page we didn't specified.
Thanks in Advance
Jijeesh.P.G
Message was edited by: Jijeesh.P.G
        Jijeesh P G

hi jijeesh,
   Welcome to SDN.
u can use to download file from application server to presentation server using the t/c CG3Y. in that it will ask the source file path and the target file path.
if u want to find the source file path in the application server, u can use the transaction AL11 to find that one.
Regards....
Arun.
Reward points if useful.

Tcode for downloading file from BW server

hi
can nay tell me what is the T-CODE to download file from BW server to my PC.
REMOVED
regards
sampath

There isn't a transaction.
You can see the example report to execute ftp on BW server.
server to server
or
client to server.
the reports are named like:
rsftp001
rsftp002
rsftp011
Regards,
Sergio

Error occurred while downloading files from Administration Server...

Hi guys,
If i already have my application deployed and exploded in ../tmp/_WL_user , when I restart the managed server it will try to download again the files from the upload directory in the Administration Servers? (I'm using stage mode).
Sometimes I got the following error:
Caused By: java.io.IOException: [DeploymentService:290066]Error occurred while downloading files from Administration Server for deployment request "0". Underlying error is: "null"
and I already have the war exploded in /tmp/_WL_user
the staging mode is not only for the first deployment? when i don't have the war exploded in /tmp/_WL_user?
I've some confusion related to the process or deployment/startup of the managed servers.
Thanks

Hi,
when you get following error * DeploymentService:290066 * then that means
A service on the machine is preventing the WebLogic Server remote instance from downloading the configuration file. This can be Hosts Intrusion Prevention (HIPS) agents or any other agent causing this issue.
Disable the agent interfering with the download process to fix this issue.
Regards,
Kal

Download file from SAP PLM or Content Server?

Similar Messages

Maybe you are looking for