Download Internal Table into a Text File in BSP?

I have an internal table which i need to download into my local pc. I know i can not use FM gui_download. Could some one please post code on how to download the internal table into a text file in BSP. Also i am not sure if i can use save dialog FM. Also need suggestion on which FM to use for save dialog which tells where to save the file.
Any help will be appreciated.
Thanks
Nahman

This might be a good starting point.
<a href="/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table">/people/thomas.jung3/blog/2004/09/02/creating-a-bsp-extension-for-downloading-a-table</a>

Similar Messages

  • Wirte the content of an internal table into a text file

    Hello Experts,
    how can I wirte the content of an internal table into a text file and putit on my local
    desktop ?
    Regards
    ertas

    Hi,
      You can use the FM GUI_DOWNLOAD for this purpose.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
      BIN_FILESIZE                    =
        FILENAME                        = 'c:\testmmv.txt'
      FILETYPE                        = 'ASC'
      APPEND                          = ' '
      WRITE_FIELD_SEPARATOR           = ' '
      HEADER                          = '00'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
      WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
      SHOW_TRANSFER_STATUS            = ABAP_TRUE
    IMPORTING
      FILELENGTH                      =
      TABLES
        DATA_TAB                        = LT_STR
      FIELDNAMES                      = 
    EXCEPTIONS
       FILE_WRITE_ERROR                = 1
       NO_BATCH                        = 2
       GUI_REFUSE_FILETRANSFER         = 3
       INVALID_TYPE                    = 4
       NO_AUTHORITY                    = 5
       UNKNOWN_ERROR                   = 6
       HEADER_NOT_ALLOWED              = 7
       SEPARATOR_NOT_ALLOWED           = 8
       FILESIZE_NOT_ALLOWED            = 9
       HEADER_TOO_LONG                 = 10
       DP_ERROR_CREATE                 = 11
       DP_ERROR_SEND                   = 12
       DP_ERROR_WRITE                  = 13
       UNKNOWN_DP_ERROR                = 14
       ACCESS_DENIED                   = 15
       DP_OUT_OF_MEMORY                = 16
       DISK_FULL                       = 17
       DP_TIMEOUT                      = 18
       FILE_NOT_FOUND                  = 19
       DATAPROVIDER_EXCEPTION          = 20
       CONTROL_FLUSH_ERROR             = 21
       OTHERS                          = 22
    IF SY-SUBRC <> 0.
    Implement suitable error handling here
    ENDIF.
    With regards,
    Vamsi

  • Download internal table value to local file from BSP

    Dear all
    I ve converted a word file to XML and doing some modifications with the help of ABAP program .After that am replacing some of the fields by passing values.after that i am getting the same file to the local system.All these i am able to do in our SAP GUI.
    But while trying in BSP am uanle to download it to the local file.
    I am having file which i have to download in the following formats.
    1.XSTRING
    2.ITAB
    3.Rawstring ITAB
    Now am trying this with cl_bsp_utility->download class.....please anybody help how to use this in my application.
    regards
    mei

    Hi,
    You can't directly access the file system of the end user from a BSP.
    Either you create a link on your web page, either you set the mime type of the response with         runtime->server->response->set_header_field( name = 'Content-Type'  value = 'some mime type' ) in order to let the end user save the file.
    Eddy

  • How to download values in an internal table into an excel file

    is there any fn module to download the values in an internal table into an excel file..

    hi
    the function module "GUI_DOWNLOAD"  downloads the data from
    an internal table into a file (can be xl, dat ,doc etc) .
    Plz follow the usage below ;
    Parameters : pa_pfile LIKE rlgrap-filename OBLIGATORY.
    Data : lv_filename TYPE STRING.
    lv_filename = pa_pfile.
    CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
       BIN_FILESIZE                  =
         FILENAME                      = lv_filename
         FILETYPE                      = 'ASC'
       APPEND                        = ' '
        WRITE_FIELD_SEPARATOR         = 'X'
       HEADER                        = '00'
       TRUNC_TRAILING_BLANKS         = ' '
       WRITE_LF                      = 'X'
       COL_SELECT                    = ' '
       COL_SELECT_MASK               = ' '
       DAT_MODE                      = ' '
       CONFIRM_OVERWRITE             = ' '
       NO_AUTH_CHECK                 = ' '
    IMPORTING
       FILELENGTH                    =
       TABLES
         DATA_TAB                      = tb_download         " table data to b downlaoded
      EXCEPTIONS
        FILE_WRITE_ERROR              = 1
        NO_BATCH                      = 2
        GUI_REFUSE_FILETRANSFER       = 3
        INVALID_TYPE                  = 4
        NO_AUTHORITY                  = 5
        UNKNOWN_ERROR                 = 6
        HEADER_NOT_ALLOWED            = 7
        SEPARATOR_NOT_ALLOWED         = 8
        FILESIZE_NOT_ALLOWED          = 9
        HEADER_TOO_LONG               = 10
        DP_ERROR_CREATE               = 11
        DP_ERROR_SEND                 = 12
        DP_ERROR_WRITE                = 13
        UNKNOWN_DP_ERROR              = 14
        ACCESS_DENIED                 = 15
        DP_OUT_OF_MEMORY              = 16
        DISK_FULL                     = 17
        DP_TIMEOUT                    = 18
        FILE_NOT_FOUND                = 19
        DATAPROVIDER_EXCEPTION        = 20
        CONTROL_FLUSH_ERROR           = 21
        OTHERS                        = 22
    IF SY-SUBRC <> 0.
          MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards
    Pankaj

  • Downloading two internal tables in same text file

    I have one internal table as like below.
    Data:begin of itab1 occurs 0,
         rec(5),
         end of itab1.
    Itab1 is getting updated from input text file(Continuous text).
    Here Itab1 contains one record with Indicator '01 and n number of records with indicator '02'.
    This needs to be seperated in to two internal tables.
    data:Begin of Itab_Head occurs 0,
         Rec_ind(2) type C,
         Name(3) type C,
         end of itab_Head.
    data:Begin of Itab_Item occurs 0,
         Rec_ind(2) type C,
         Id(3) type C,
         Status(10,
         end of itab_Item.
    loop at itab1.
    If itab1-Rec+0(2) = '01'.
       Itab_Head-Rec_Ind = itab1-rec+0(2).
       Itab_Head-Name = itab1-rec+2(3).
       Append Itab_Head.
    elseif itab1-rec+0(2) = '02'.
       Itab_Item-Rec_Ind = itab1-rec+0(2).
       Itab_Item-Id = itab1-rec+2(3).
       Append Itab_Item.
    endif.
    endloop.
    After moving to the internal tables I am doing some processing and updating the status of Itab_item.
    After all these again I have to download the internal table as a text file.Now my question is.
    I have values in 2 diff internal tables.How to download the two in same file.

    See this sample code.
    data: itab1 type string occurs 0 with header line,
          itab2 type string occurs 0 with header line.
    itab1 = 'itab1_text'.
    append itab1.
    itab2 = 'itab2_text'.
    append itab2.
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
        exporting
          FILENAME = 'C:\ftext.txt'
        APPEND = 'X'
        changing
         DATA_TAB = itab1[].
    CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
        exporting
          FILENAME = 'C:\ftext.txt'
          APPEND = 'X'
        changing
         DATA_TAB = itab2[].
    Svetlin

  • How to download internal table data to .xlsx file ?

    Hello All,
    I am using SAP ECC 6.0. I need to download internal table data to .xlsx file.
    I tried GUI_DOWNLOAD, all the data are getting transferred to the .xlsx file, but while opening I am getting the below error.
    Excel cannot open the file "download.xlsx" because file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file.
    Though Microsoft office 2007 is installed in my system.
    Please help <removed by moderator>.
    Edited by: Thomas Zloch on Oct 24, 2011 10:55 AM

    Hi,
    Please find the below code to download data into excel file.
      DATA: ld_filename TYPE string,
            ld_path TYPE string,
            ld_fullpath TYPE string,
            ld_result TYPE i.
    Display save dialog window
      CALL METHOD cl_gui_frontend_services=>file_save_dialog
        EXPORTING
         window_title      = ' '
          DEFAULT_EXTENSION = 'XLS'
          default_file_name = 'accountsdata'
          INITIAL_DIRECTORY = 'c:\temp\'
        CHANGING
          filename          = ld_filename
          path              = ld_path
          fullpath          = ld_fullpath
          user_action       = ld_result.
    Check user did not cancel request
      CHECK ld_result EQ '0'.
      CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
            filename         = ld_fullpath
            filetype         = 'ASC'
          APPEND           = 'X'
            write_field_separator = 'X'
          CONFIRM_OVERWRITE = 'X'
       TABLES
            data_tab         = it_datatab[]     "need to declare and populate
       EXCEPTIONS
            file_open_error  = 1
            file_write_error = 2
            OTHERS           = 3.
    Thanks and Regards
    Chitra

  • Internal table to a text file in Unix

    Hi ,
    I was trying to download data from Internal table to a text file in Unix.
    How do I do this?
    One more thing is the fields on each record of the file should be delimited by the”!” (pipe) character.
    Any one please me with the code.
    Thanks

    check these links...
    ASCII value
    ASCII value
    Creating a Unix File
    or do you mean application server?
    then use open dataset. transfer and close dataset.
    example:
    DATA: e_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.     
      open dataset e_file for output in text mode.
      lOOP AT it_datatab......
        transfer it_datatab to e_file.
      ENDLOOP.
      close dataset e_file.
    regds,
    kiran

  • Download chinese text from internal table to PC text file

    Hi Experts,
      Iam downloading internal table (which is having records in chinese text) on to PC file. But the iam not getting correct text in the pc file. Iam getting some garbage values text.
    Iam using GUI_download FM to donwload the text.
    Iam using internal table
    Begin of itab occurs 0,
    text type string,
    end of itab.
    and passing paramters.
    Filename
    codepage
    table.
    Can you please tell me how can I achive this and what are the parameter need to pass for this.
    Thank In Advance.

    Hi,
    You can use follwoing  funtion modules instead of GUI_DOWNLOAD. It will be more easier.
    SAP_CONVERT_TO_CSV_FORMAT
    SAP_CONVERT_TO_TEX_FORMAT
    SAP_CONVERT_TO_TXT_FORMAT
    SAP_CONVERT_TO_XLS_FORMAT
    SAP_CONVERT_TO_XML_FORMAT.
    I hope this will help you out.
    Help children of U.N World Food Program by rewarding  points and encourage others to answer your queries.

  • Downloading into a text file with comma seperation

    hey experts,
    well i want to download various fields of an internal table into a text file.but the hitch is that all the columns should be seperated by a comma.something like csv.
    could you please help me with this.?
    i have tried using gui download but the seperator field was not working.
    thanks in advance...
    regards,
    sandra.

    hey sandra,
    for comma seperation and downloading ,you can use the following fm.
    here the i_field seperator should be given as "," as in ur case.
    i_tab3 is the table from which the values are being fetched.
    and i_tab2 is the table conatining the comma seperated values.
    CALL FUNCTION 'SAP_CONVERT_TO_TEX_FORMAT'
       EXPORTING
         I_FIELD_SEPERATOR          = ','
      I_LINE_HEADER              =
      I_FILENAME                 =
      I_APPL_KEEP                = ' '
       TABLES
         I_TAB_SAP_DATA             = I_TAB3
       CHANGING
        I_TAB_CONVERTED_DATA       = I_TAB2
    EXCEPTIONS
      CONVERSION_FAILED          = 1
      OTHERS                     = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    after this u can use the gui download fm as required.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      BIN_FILESIZE                    =
        FILENAME                        = TESTFILNA
      FILETYPE                        = 'ASC'
      APPEND                          = ' '
        WRITE_FIELD_SEPARATOR           = 'x'
      HEADER                          = '123'
      TRUNC_TRAILING_BLANKS           = ' '
      WRITE_LF                        = 'X'
      COL_SELECT                      = ' '
      COL_SELECT_MASK                 = ' '
      DAT_MODE                        = ' '
      CONFIRM_OVERWRITE               = ' '
      NO_AUTH_CHECK                   = ' '
      CODEPAGE                        = ' '
      IGNORE_CERR                     = ABAP_TRUE
      REPLACEMENT                     = '#'
      WRITE_BOM                       = ' '
      TRUNC_TRAILING_BLANKS_EOL       = 'X'
      WK1_N_FORMAT                    = ' '
      WK1_N_SIZE                      = ' '
      WK1_T_FORMAT                    = ' '
      WK1_T_SIZE                      = ' '
      WRITE_LF_AFTER_LAST_LINE        = ABAP_TRUE
    IMPORTING
      FILELENGTH                      =
    TABLES
          DATA_TAB                      = I_TAB2
      FIELDNAMES                      =
    EXCEPTIONS
      FILE_WRITE_ERROR                = 1
      NO_BATCH                        = 2
      GUI_REFUSE_FILETRANSFER         = 3
      INVALID_TYPE                    = 4
      NO_AUTHORITY                    = 5
      UNKNOWN_ERROR                   = 6
      HEADER_NOT_ALLOWED              = 7
      SEPARATOR_NOT_ALLOWED           = 8
      FILESIZE_NOT_ALLOWED            = 9
      HEADER_TOO_LONG                 = 10
      DP_ERROR_CREATE                 = 11
      DP_ERROR_SEND                   = 12
      DP_ERROR_WRITE                  = 13
      UNKNOWN_DP_ERROR                = 14
      ACCESS_DENIED                   = 15
      DP_OUT_OF_MEMORY                = 16
      DISK_FULL                       = 17
      DP_TIMEOUT                      = 18
      FILE_NOT_FOUND                  = 19
      DATAPROVIDER_EXCEPTION          = 20
      CONTROL_FLUSH_ERROR             = 21
      OTHERS                          = 22
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    hope this helps u.
    do reward points if useful.....:-)

  • How to download data from an internal table to a text

    Hi All,
    I want to download data  from an internal table to a text file.
    The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
    The sample of the desired data that i require should be this way:-
    13456TR|M|COUP|MATERIAL|KGS
    Thanks in advance.
    Regards
    Satish.

    Hi,
    Try this..
    REPORT  zc1download message-id zc1dwnmsg.
    *& Declaration Section for the Tables *
    TABLES: makt.
    *& Declaration Section for the Internal Tables
    DATA: intab TYPE TABLE OF makt,
          wa_intab LIKE LINE OF intab,
          no_of_rec TYPE i,
          count TYPE i.
    DATA: BEGIN OF f_intab,
            str(255) TYPE c,
          END OF f_intab.
    DATA: t_intab LIKE TABLE OF f_intab,
          w_intab LIKE LINE OF t_intab,
          temp(255) TYPE c.
    FIELD-SYMBOLS: <f> TYPE ANY.
    *& Selection ScreenSection for the file download
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
                tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
                others RADIOBUTTON GROUP rad1,
                delimit TYPE c.
    SELECTION-SCREEN END OF BLOCK b1.
    START-OF-SELECTION.
      IF file IS INITIAL. " check to ensure file.
        MESSAGE i001.
        EXIT.
      ENDIF.
      IF others = 'X'.    " check to ensure delimiter.
        IF delimit = ' '.
          MESSAGE i002.
          EXIT.
        ENDIF.
      ENDIF.
      SELECT * FROM makt INTO TABLE intab.
      IF tab = 'X'.       " default delimiter tab is used
          CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'DAT'
            mode                    = 'A'
          TABLES
            data_tab                = intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ELSE.             " If user defind delimiter is to be used
                  Counts the number of fields                *
        DO.
          ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
          IF sy-subrc <> 0.
            EXIT.
          ELSE.
            count = count + 1.
          ENDIF.
        ENDDO.
        LOOP AT intab INTO wa_intab.
          DO count TIMES. " Adding the delimiter in required places
            ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
            CONCATENATE temp delimit <f> INTO temp.
          ENDDO.
          SHIFT temp.
          APPEND temp TO t_intab.
          CLEAR temp.
        ENDLOOP.
        CALL FUNCTION 'WS_DOWNLOAD'
          EXPORTING
            filename                = file
            filetype                = 'ASC'
            mode                    = 'A'
          TABLES
            data_tab                = t_intab
          EXCEPTIONS
            file_open_error         = 1
            file_write_error        = 2
            invalid_filesize        = 3
            invalid_type            = 4
            no_batch                = 5
            unknown_error           = 6
            invalid_table_width     = 7
            gui_refuse_filetransfer = 8
            customer_error          = 9
            no_authority            = 10
            OTHERS                  = 11.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDIF.
      WRITE:/ 'The Data has been tranfered to :', file.
    Cheers
    Kathir!~

  • Download internal table to presentation server in UTF-8 format

    Hello everyone.
    We are trying to use function module GUI_DOWNLOAD to download data from internal table to a text file (filetype ASCII). The defualt encoding for the text file is ANSI but we need to download it with the encoding UTF-8.
    We have already used codepage 4110 but that did not solve the problem.
    We are using SAP ECC 5.0 system.
    Can anyone please provide us with a solution? We need to solve this as early as possible.

    Hi Saurav.
    Try this
    1.Go to SAP GUI Logon
    2. Change your icon logon on Tabstrib "Code Page" at "Upload/Download"  to encod whatever language
    do you want.
    Hope it helps.
    Sayan.

  • Hash Table copy to Text file : urgent

    HI
    I have a hash Table which cintaine id's and name pair Now i want to copy or dump this whole table into a Text file, But i do not know how to do this .
    This is very urgent for me.
    Please help me .
    Preeti

    HashTable is Serializable
    use ObjectOutputStream to write to the file and use ObjectInputStream to read from the file
    HashTable ht=new HashTable()
    ht.put("key1","value1");
    ht.put("key2","value2");
    FileOutputStream ostream = new FileOutputStream
    ("Hash.txt");
    ObjectOutputStream oos = new ObjectOutputStream(ostream);
    oos.writeObject(ht);
    oos.flush();
    oos.close();//dont forget thisuse ObjectInputStream To read HashTable from file
    use readObject() method

  • Error while downloading data from internal table into XML file

    hi all,
    i developed a program to download data from into internal table to xml file like this.
    tables: mara.
    parameters: p_matnr like mara-matnr.
    data: begin of itab_mara occurs 0,
                matnr like mara-matnr,
                ernam like mara-ernam,
                aenam like mara-aenam,
                vpsta like mara-vpsta,
          end of itab_mara.
    data: lv_field_seperator type c,     " value 'X',
          lv_xml_doc_name(30) type c,    " string value ‘my xml file’,
          lv_result type i.
          lv_field_seperator = 'x'.
          lv_xml_doc_name = 'my xml file'.
    types: begin of truxs_xml_line,
              data(256) type x,
          end of truxs_xml_line.
    types:truxs_xml_table type table of truxs_xml_line.
    data:lv_tab_converted_data type truxs_xml_line,
         lt_tab_converted_data type truxs_xml_table.
    data: lv_xml_file type rlgrap-filename value 'c:\simp.xml'.
    select matnr ernam aenam vpsta from mara into table itab_mara up to 5
           rows where matnr = p_matnr.
    CALL FUNCTION 'SAP_CONVERT_TO_XML_FORMAT'
    EXPORTING
       I_FIELD_SEPERATOR          = lv_field_seperator
      I_LINE_HEADER              =
      I_FILENAME                 =
      I_APPL_KEEP                = ' '
       I_XML_DOC_NAME             = lv_xml_doc_name
    IMPORTING
       PE_BIN_FILESIZE            = lv_result
      TABLES
        I_TAB_SAP_DATA             = itab_mara
    CHANGING
       I_TAB_CONVERTED_DATA       = lt_tab_converted_data
    EXCEPTIONS
      CONVERSION_FAILED          = 1
      OTHERS                     = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    open dataset lv_xml_file for output in binary mode.
    loop at lt_tab_converted_data into lv_tab_converted_data.
    transfer lv_tab_converted_data to lv_xml_file.
    endloop.
    close dataset lv_xml_file.
    this program is syntactically correct and getting executed, but when i open the target xml file it is showing the following error.
    The XML page cannot be displayed
    Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
    XML document must have a top level element. Error processing resource 'file:///C:/simp.xml'.
    will anyone show me the possible solution to rectify this error
    thanks and regards,
    anil.

    Hi,
    Here is a small sample program to convert data in an internal table into XML format and display it.
    DATA: itab  TYPE TABLE OF spfli,
          l_xml TYPE REF TO cl_xml_document.
    * Read data into a ITAB
    SELECT * FROM spfli INTO TABLE itab.
    * Create the XML Object
    CREATE OBJECT l_xml.
    * Convert data in ITAB to XML
    CALL METHOD l_xml->create_with_data( name = 'Test1'
                                         dataobject = t_goal[] ).
    * Display XML Document
    CALL METHOD l_xml->display.
    Here are some other sample SAP programs to handle XML in ABAP:
    BCCIIXMLT1, BCCIIXMLT2, and BCCIIXMLT3.
    Hope this helps,
    Sumant.

  • How to download internal table data into xml file?

    Hi,
    Experts,
    I have downloaded internal table data into XLS format using GUI_DOWNLOAD Function module, But i didn't Know how to download internal table data into XML format please post some ideas/inputs on this issue.
    Thank you,
    Shabeer ahmed.

    check this
    data : gd_repid type sy-repid.
    GD_REPID = SY-REPID.
    DATA : L_DOM TYPE REF TO IF_IXML_ELEMENT,
           M_DOCUMENT TYPE REF TO IF_IXML_DOCUMENT,
           G_IXML TYPE REF TO IF_IXML,
           W_STRING TYPE XSTRING,
           W_SIZE TYPE I,
           W_RESULT TYPE I,
           W_LINE TYPE STRING,
           IT_XML TYPE DCXMLLINES,
           S_XML LIKE LINE OF IT_XML,
           W_RC LIKE SY-SUBRC.
    DATA: XML TYPE DCXMLLINES.
    DATA: RC TYPE SY-SUBRC,
          BEGIN OF XML_TAB OCCURS 0,
          D LIKE LINE OF XML,
          END OF XML_TAB.
    data : l_element           type ref to if_ixml_element,
           xml_ns_prefix_sf     type string,
           xml_ns_uri_sf        type string.
    CLASS CL_IXML DEFINITION LOAD.
    G_IXML = CL_IXML=>CREATE( ).
    CHECK NOT G_IXML IS INITIAL.
    M_DOCUMENT = G_IXML->CREATE_DOCUMENT( ).
    CHECK NOT M_DOCUMENT IS INITIAL.
    CALL FUNCTION 'SDIXML_DATA_TO_DOM'
    EXPORTING
       NAME = 'REPAIRDATA'
       DATAOBJECT = IT_FINAL_LAST1[]
    IMPORTING
       DATA_AS_DOM = L_DOM
    CHANGING
       DOCUMENT = M_DOCUMENT
    EXCEPTIONS
       ILLEGAL_NAME = 1
       OTHERS = 2.
    CHECK NOT L_DOM IS INITIAL.
    W_RC = M_DOCUMENT->APPEND_CHILD( NEW_CHILD = L_DOM ).
    *Start of code for Header
    * namespace
    t_mnr = sy-datum+4(2).
    CALL FUNCTION 'IDWT_READ_MONTH_TEXT'
      EXPORTING
        LANGU         = 'E'
        MONTH         = t_mnr
    IMPORTING
       T247          = wa_t247
    concatenate sy-datum+6(2)
                wa_t247-ktx
                sy-datum(4) into t_var1.
    concatenate sy-uzeit(2)
                sy-uzeit+2(2)
                sy-uzeit+4(2) into t_var2.
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    l_element  = m_document->get_root_element( ).
    xml_ns_prefix_sf = 'TIMESTAMP'.
    concatenate t_var1 t_var2 into xml_ns_uri_sf separated by space.
    clear : t_var1,
            t_var2,
            t_mnr,
            wa_t247.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    xml_ns_prefix_sf  = 'FILECREATOR'.
    xml_ns_uri_sf    =   'SAP'.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    xml_ns_prefix_sf  = 'CLAIMGROUP'.
    xml_ns_uri_sf    = '1'.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    clear : xml_ns_prefix_sf,
            xml_ns_uri_sf.
    xml_ns_prefix_sf  = 'CLAIMTYPES'.
    xml_ns_uri_sf    = 'W'.
    l_element->set_attribute( name  = xml_ns_prefix_sf
                              namespace = ' '
                              value = xml_ns_uri_sf ).
    *End of Code for Header
    CALL FUNCTION 'SDIXML_DOM_TO_XML'
    EXPORTING
      DOCUMENT = M_DOCUMENT
    IMPORTING
      XML_AS_STRING = W_STRING
      SIZE = W_SIZE
    TABLES
      XML_AS_TABLE = IT_XML
    EXCEPTIONS
      NO_DOCUMENT = 1
      OTHERS = 2.
    LOOP AT IT_XML INTO XML_TAB-D.
    APPEND XML_TAB.
    ENDLOOP.
    *Start of Code for File name
    concatenate p_file
                '\R'
                '000_119481'
                sy-datum+6(2) sy-datum+4(2) sy-datum+2(2)
                sy-uzeit(2)   sy-uzeit+2(2) sy-uzeit(2) '.xml' into p_file.
    *End of Code for File name
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
      BIN_FILESIZE = W_SIZE
      FILENAME = p_file
      FILETYPE = 'BIN'
    TABLES
      DATA_TAB = XML_TAB
    EXCEPTIONS
      OTHERS = 10.
    IF SY-SUBRC  = 0.
                  MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • Conversion of internal table into excel file format &put it on app server

    Hi,
    My requirement is to convert the internal table into excel file format and I have to store it on application server so that administrator can send the file thr e-mail attachment.
    So, please let me know how to convert the records of internal table and store it on application server in Excel file format.
    TIA,
    Nitin

    Hi,
      Use FM GUI_DOWNLOAD to download the data from inernal table to excel sheet.
    Then Using tcode CG3Z u can transfer file to application server.
    *&      Form  sub_download
          text
    -->  p1        text
    <--  p2        text
    FORM sub_download.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
        BIN_FILESIZE                    =
          filename                        = p_path
         filetype                        = 'ASC'
        APPEND                          = ' '
         write_field_separator           = 'X'
        HEADER                          = '00'
        TRUNC_TRAILING_BLANKS           = ' '
        WRITE_LF                        = 'X'
        COL_SELECT                      = ' '
        COL_SELECT_MASK                 = ' '
        DAT_MODE                        = ' '
        CONFIRM_OVERWRITE               = ' '
        NO_AUTH_CHECK                   = ' '
        CODEPAGE                        = ' '
        IGNORE_CERR                     = ABAP_TRUE
        REPLACEMENT                     = '#'
        WRITE_BOM                       = ' '
        TRUNC_TRAILING_BLANKS_EOL       = 'X'
        WK1_N_FORMAT                    = ' '
        WK1_N_SIZE                      = ' '
        WK1_T_FORMAT                    = ' '
        WK1_T_SIZE                      = ' '
      IMPORTING
        FILELENGTH                      =
        TABLES
          data_tab                        = it_final
        FIELDNAMES                      =
      EXCEPTIONS
        FILE_WRITE_ERROR                = 1
        NO_BATCH                        = 2
        GUI_REFUSE_FILETRANSFER         = 3
        INVALID_TYPE                    = 4
        NO_AUTHORITY                    = 5
        UNKNOWN_ERROR                   = 6
        HEADER_NOT_ALLOWED              = 7
        SEPARATOR_NOT_ALLOWED           = 8
        FILESIZE_NOT_ALLOWED            = 9
        HEADER_TOO_LONG                 = 10
        DP_ERROR_CREATE                 = 11
        DP_ERROR_SEND                   = 12
        DP_ERROR_WRITE                  = 13
        UNKNOWN_DP_ERROR                = 14
        ACCESS_DENIED                   = 15
        DP_OUT_OF_MEMORY                = 16
        DISK_FULL                       = 17
        DP_TIMEOUT                      = 18
        FILE_NOT_FOUND                  = 19
        DATAPROVIDER_EXCEPTION          = 20
        CONTROL_FLUSH_ERROR             = 21
        OTHERS                          = 22
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " sub_download
    Otherwise use OPEN DATASET and TRANSFER statement to download data from internal table to direct application server
    Regards,
    Prashant

Maybe you are looking for

  • ICC Profiles for papers and not for HP printers.

    Hello, I apologize if this has been asked a billion times before, but I have been trying to find the ICC profiles to install for a different printer.  I am not using a HP printer, but a Canon iP6000D.  Let me explain, I'm a student and my class requi

  • Downgrade Oracle 9i Enterprise to Standard

    Hi all. Is there an easy way to downgrade an installed Oracle 9i Enterprise database server to a standard edition without doing a full re-installation? Best Regards Jacques Riget

  • House Bank on Business Partner

    Hi Experts, I have a company in SAP where the House Bank Account number does not appear by default when adding a new BP. The Bank Name appears, but not the account number.  I can manually select the account using the dropdown, but in my other company

  • TB Last question

    Good Morning. I'm a little perplexed and hoping someone can straighten me out... I created a member to track outstanding shares of stock, which gets updated quarterly to calculate Earnings per Share. I used the Time Balance funstionality to so that,

  • How can i convert multisim12 file to multisim13

    Thanks