Download tools to manage this host from
Hi All,
Recently we got a new SAP Discovery V4 from HP. While starting the server and after login we are getting an error like below,
Download tools to manage this host from:
http://XX.XXX.XX.XX (STATIC)
From here, no where its going further. I guess it has to do with ESXi.
Could some one please help me here.
Best Regards,
Prasad.
Hi Prasad,
When you say "http://XX.XXX.XX.XX", do you mean the IP address of your ESXi server? If yes then this is correct, you would first need to install the VMware VSphere client to be able to start the Linux and Windows server.
You need to follow the Discovery system V4 quick guide to get started with the system. The V4 quick guide is available here: http://www.sdn.sap.com/irj/sdn/discoverysystem-guide
If you continue to experience problems, please open a OSS support message with the component CA-SOA-DS.
thanks,
Deepa
Similar Messages
-
I downloaded the TDS managed IP Hosted Assistant Toolbar 17.4.86.1 and I cannot get it to work on Firefox. It says it is fully compatible but I downloaded it like the instructions said and it will not show as a toolbar option for Firefox. Please help and I am trying to not use IE at work as we run XP. Thanks.
I'm surprised companies still use XP. My old school already switched to 8.
Actually, if you're experiencing problems with an addon/extension, you would better off asking the developer about it since Mozilla nor us volunteers have anything to do with the extension not working. I would suggest Safe Mode to see if that addon is being conflicted with by another addon but I don't want to give you wrong steps.
If you want to try Safe Mode, feel free to:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled. -
Download tool part of iso files?
I have a 2 year old 640 gig dv7 laptop and I received the imminent "hard disk failure" message. So, I backed up the hard drive (8 dvds) and made recovery disks (6 dvds). I bought a new Seagate hard drive of 500 gigs and installed it. I then started the recovery process.
I then received a message that said my new hard disk was smaller than the original and to not continue. I did try four different installs with no success, getting a blank screen except for the hp logo on the center of the screen and a press esc for menu.
I have read the advice of trying the iso file download via either dvd or usb. My question is: the directions talk about using the w7 dvd/usb download tool. Is this download tool part of the iso files? How do I get it onto my computer first? I know it's probably simple, but it would be nice for me to get that clarified before doing the downloads.
Thx.
This question was solved.
View Solution.Hi,
As the error you're encountering is just due to the fact that Recovery Discs will not install correctly on a drive smaller than the one they were created on, I would just burn the correct ISO to a blank DVD and use this to perform the installation - there's no need to create a bootable USB drive unless you have a problem with the optical drive on your notebook.
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
An example of a COA Label can be seen Here.
You can create an installation disc yourself using another PC - just download the correct Disc Image ( this must be the exact same version that originally came with your notebook ) from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers and software you may need can be found by entering your full Model No. or Product No. Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
I'm trying to install VMM 2012 SP1 on a Windows Server 2012 machine and it fails with this error,
the scenario is as follows,
Old database (from 2012 RTM) exists on remote SQL 2012 SP1 server
Server was 2008 R2 SP1 so I decided to make a fresh installation of 2012 with the same name
installed ADK
specific error: 01:42:13:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException, Exception.Message: Unable to assign the name NO_PARAM to this host because this name is already in
use.
please helpI had a similar problem today when upgrading from SCVMM 2012 RTM to SCVMM 2012 SP1 RTM. To re-create the issue you describe originally you can actually just uninstall SCVMM 2012 SP1 RTM with "retain data" option and re-install the software on the same
computer (with the same name of course), attaching it to the retained DB. If you change the SCVMM server name I believe it will make some things go wrong after your install, like missing VM template passwords for example as the data gets encrypted in
the DB. Maybe it didn't but I didn't risk it. I definitely know if you change service accounts on a scenario like this you will be without the encrypted DB data which isn't much fun. To avoid changing the computer name, if you look in the setup log
files in %systemdrive%\ProgramData\VMMLogs\, specifically the SetupWizard.log file. You will see details on it failing because the same computer name is in the DB table "dbo.tbl_ADHC_AgentServer" and until it is removed from that table I wasn't able to get
the install to complete at all. The error in my logs looked something like this "InnerException.Type: System.Data.SqlClient.SqlException, InnerException.Message: Violation of UNIQUE KEY constraint 'unique_ADHC_AgentServer_ComputerName'. Cannot insert duplicate
key in object 'dbo.tbl_ADHC_AgentServer'. The duplicate key value is (computername.is.writtenhere). The statement has been terminated." In the row data in the DB it also seems to suggest that the computer name had "Virtual Machine Manager Library Files" on
it which is strange since I always remove the local SCVMM server as a library server after I install it and use an off box library server. -
i have lost my photos/videos when i imported from my ipad 2 to my new imac latest version OS X 10.8.4
and it's not reading the files. I have downloaded iMac library manager and can see them. when i go back into iphoto i'm getting the following message :
Do you want to switch the current iPhoto Library from “iPhoto Library.photolibrary” to “iPhoto Library.photolibrary” and relaunch iPhoto?
I don't know what to do - please help !!!!
can someone shed some light please ?So it appears you have only one library on the hard drive. Apply the two fixes below in order as needed to that library:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory. -
Tool for managing tickets from client
hi,
My Client has implemented SAP in June 2013.And soon after go live they have outsourced 100% work to some agency.
Now problem is that that agency dont have any tool to manage the requests which they are getting from the cleint to process in SAP.
All the Accounts payable ,Gl enteries,PO,GR,MIRO all these kind of transactions that outourced agency is doing.They are getting emails in oulook from the client saying "please process PO" with attached details,likewise for all other processes.
Using outlook is littele wierd because its big team of 50 people.If 50 people will use one oulook then that will hamer the efficiency and effect SLA's.
Can anybody suggest some local tool to be used by this agency so that they perform in a better way.
Solution Manager and HPQC are not perfect fir for this kind of scenario.
Awaiting for the replies.
Regards,
DSHi Deepa
You can go for HPSM tool.
About HPSM Tool:
HP Service Manager is scalable, robust software that’s core to the HP IT Service Management (ITSM) solution with incident, change, and other management process standardization, quality service delivery and support, and enhanced agent and end-user support. Providing a single communication hub, Service Manger enables IT to work as a single organization governed by a consistent set of processes, scaling from medium-sized environments to the large enterprise. Its robust functionality is based upon built-in ITIL best practices that enable self-service and provide controls for the cloud.
Best Regards,
Avinash Gholap -
Where do i download SAP solution manager from?
Good day,
where do i download SAP solution manager from ? i tried using this link which was shown in some other websites , but it does'nt seem to work.
The link is :
http://service.sap.com/swdc -> Download -> Installations and Upgrades -> Entry by Application Group -> Installations and Upgrades -> SAP Technology Components -> SAP Support Enablement Package - >SAP Support Enabl. Package 1.0
Many thanks
Kripashankar.NSEP is an additional package on top of Solman which must be licensed separately.
http://service.sap.com/swdc -> Download -> Installations and Upgrades -> Entry by Application Group -> Installations and Upgrades -> SAP Technology Components
That is the right path - if you don´t see SolMan you have to either contact your sales person so that you get an installation number or create a call at XX-SER-CONTR and ask for an installation number for SolMan and the download permissions.
Markus -
How do I keep my downloaded content on my iPhone 4 when connectng to iTunes? It says erase and sync. I want to keep what I have downloaded, and manually manage contend on iTunes. Can I do this without it saying erase and sync?
No backup? Never a good idea to not maintain a backup of your important data. If you do not have a backup, follow these instructions:
By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you formatted your computer, your phone, will see your computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else:
http://www.wideanglesoftware.com/touchcopy/index.php
Once you've done that, do the following in the order specified:
1. Disable auto sync when an ipod/iphone is connected under preferences in itunes(under the edit menu).
2. Make sure you have one contact & one event in whatever supported applications you use for contact & calendar syncing. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
3. Connect your phone, itunes running, do not sync at this point.
4. Store>Authorize this computer.
5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
6. Right click in the device pane & select reset warnings.
7. Right click again and select backup.
8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
That's as good as it gets without a backup of your itunes library and other important data.. -
Steps.
Open Facebook page.
On the wall select video.
Select upload a video from your drive.and click on it.
Drop down window opens.
Select a video file on your computer.
Please upload only if:
The video is under 1,024 MB and 20 minutes.
The video was made by you or your friends.
Click on browse
Firefox"File Upload window opens"Pictures Library"Exposing available videos on my file.Double click on the video selected.
Browser window opens and shows:"Brian on the move again..MPG.
Click on "Share"Uploading Video-Mozilla Firefox"window opens and shows: http://www.facebook.com/video/upload_popup.php?video_id=2654584286114&qn=1321170149&xhpc_composerid=uqj39y_10&xhpc_context=profile&profile_id=185862931498895
Bellow that :Firefox prevented this page from automatically reloading."Please wait while your video uploads."But is blocked .
Check the "Allow"button Allows it to run for about 5 seconds before blocking again. This is uploaded in the 5 second intervals 1.) 4.13 MB of 39.87 MB (13.16 KB/sec) -- 46 minutes remaining. 2.) 5.33 MB of 39.87 MB (13.22 KB/sec) -- 44 minutes remaining 3.) 6.09 MB of 39.87 MB (13.11 KB/sec) -- 43 minutes remaining. 4.) 6.67 MB of 39.87 MB (13.18 KB/sec) -- 43 minutes remaining. 5.) 6.) 7.43 MB of 39.87 MB (13.11 KB/sec) -- 42 minutes remaining etc etc and so on and so on,each time the "Allow"button is checked the message :Waiting for vupload.facebook.com -Connecting-Connected-Sending request-Transferring data appears and after checking the "Allow" button 10 or 12 times we arrive at"11.93 MB of 39.87 MB (13.22 KB/sec) -- 36 minutes remaining.The upload shows 36 minutes remaining but the video itself is no longer than 1 min 54 sec and 39.8 MB in size.See:
*Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
See also:
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox -
I tried to download an e-filing client software from the World Intellectual Property Organization (WIPO) website [http://www.wipo.int/pct-safe/en/download/download_client.htm] using Firefox. Clicking the link to download yielded no activity. I eventually tried the same link in internet explorer and it worked. This occurred last week. I have a deadline to complete an international patent filing today; and in order to do so online, I had to request a Secure Digital ID from WIPO. It was approved and received early this morning (Central European Time Zone); and the accompanying guidelines suggested that I use the same computer and browser to retrieve the ID. This meant that since I use Firefox as my default browser my request was also made and had to be retrieved in Firefox. Following the WIPO support instructions I ran into exactly the same problem of inactivity when trying to "Backup" my newly installed ID certificate per WIPO instruction, so that it may be imported into the e-filing software. Please help as soon as you can as my patent deadline is merely hours away. Please also see a response from the WIPO helpdesk below:
Dear User,
we hereby provide the following solution / answer to your request:
Subject: Certificates (use of and different types)/26708 Answer from PCT-SAFE Help Desk:
Unfortunately, apart from revoking your new certificate and then re-enrolling using Internet Explorer, I do not see many options.
We cannot do support for external software, like Firefox, but I had a quick glance at Mozilla's support side and it seems that you might be able to resolve your problem by starting Firefox in safe mode, and/or disabling all your Firefox extensions. I have to stress the fact that this is not a procedure tested and approved by the PCT-SAFE team.
As this is an extremely time-sensitive issue please also contact me by phone so that we can work through the solution in real-time. I can be reached at 555-555-555 - Sheldon
'''Moderator edit: Removed personal information. This is a public forum. Please do not post any personal information as it may put your safety at risk -FF4L'''
== This happened ==
Every time Firefox opened
== Attempting to download from a secure serverJust to follow up on my findings. My last issue regarding the digital certificate was not at the time of initial download into Firefox, but my application required that I backup the certificate into a folder which can then be accessed to sign a submission generated by a third-party Client software.
After finally steering away from the digital signing route by opting for a non digital filing of my project, I later revisited the Firefox certificates list only to find that the 'Backup' button still didn't work or respond in any way whatsoever; however since I only had a single certificate on my list... I threw my hand up in the air and tried the 'Backup All' button... guess what - that worked!! My browser then navigated to a file browser which allowed me to save the certificate to a folder of my choice. Of course this was after the fact as my deadline had already passed and and I had the Administrator who initially granted my secure ID revoke it once I was blocked from downloading it by Firefox.
Just an update/FYI for y'all... But I'm not sure if this type of anomoly is due to a glitch on my computer or a glitch on the browser - but it certainly did catch me off-guard during a deadline. -
I downloaded a free App. called ThaiPad from Bangkok Post newswpapers. I downloaded on my PC running Windows 7. The Bangkok Post recommended itunes for downloading. I completed the download but it would not open. I assume that this App was for iPad or iPod etc as the Bangkok Post wants to sell content, after the free content, via itunes store I assume. Can someone tell me if I can open this in Windows 7 and if so how. Thanks.
Any app that you download using iTunes is for use only on iPad, iPhone, or iPod Touch, and not on a PC. It's possible they have a separate app for PC, as some companies do, but the one you downloaded via iTunes definitely will not open in Windows 7.
Message was edited by: ClayG -
"You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 63 days." How to handle this situation
https://discussions.apple.com/message/16567363#16567363
From the More Like This section on the right -
Why when I try to download songs onto my iPhone from my iPad, it pops up and says "This device is already associated with an Apple ID, You can download past purchases on this device with just one Apple ID every 90 days. You cannot associate this device with a different Apple ID for 90 days
(Note, mine says 28 days because I have been waiting for a fair bit for this to go away.)You can't keep changing the ID you use with iTunes, you are limited to once every 90 days.
-
How do I block this msg from always popping up "iTunes requires Safari 4.0.3 or later to be installed to use the iTunes Store within iTunes. Use Software Update to download and install the latest version of Safari". I cannot download this software bc my lap top is to old. The msg literally pops up everytime I make any moves on itunes and is VERY annoying.
I have a 2006 MacBook with an Mac OS X version 10.5.
In that case, try downloading a Safari 5.0.5 for leopard from the following location:
http://www.apple.com/safari/download/ -
Ever since the last update, I'm having problem accessing my e-mail account. I keep getting an annoying bar at the top of the screen "Firebox prevented this page from automatically redirecting to another page." I have to keep hitting the allow button, sometimes twice. And when I do get into the accounts the bar jumps in and out every time I open a new e-mail, or delete and old one.
How do I get rid of this. I've had this account for years, with a very reputable private e-mail provider. This is nuts.See:
*Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
See also:
*https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox
Maybe you are looking for
-
Downloads in Downloads Folder error
This doesn't relate to a Mac OS X download.... in my download folder, I can see the download bar, but it's stalled, I search through the folder and see nothing that is downloading so I'm starting to assume it's a bug in OS X 10.6 Any way to resolve t
-
HT201269 How to connect I phone to PC ?
How to connect I phone to PC ?
-
Java.sql.SQLException: ORA-01000: maximum open cursors exceeded ORA-06512:
Please help me for resolving this Error. I got This Error while Web Load TEsting. java.sql.SQLException: ORA-01000: maximum open cursors exceeded ORA-06512: at "IADMIN.ADM_ADMIN_ISMART_PCK", line 269 ORA-06512: at line 1
-
After my computer has been sent to Apple my password is not working, how can I login again?
Hello, after my computer had been broken I sent it to apple, but somehow I can not login and I am using a guestuser right now. I am pretty sure that I am using writing in the right password but it does not let me in. How can I login again?
-
IMac Will Not Turn On (Even When Cool and SMC Reset)
Hi all. I have recently had a VERY ANNOYING problem with my iMac. It will not turn on. No matter what. I have reset the SMC (unplug, wait whatever, plug back in etc.) and have cooled it down with time and a battery fan held up to the case, but it sti