Downloading .xls file with multiple rows and Columns

Hi ALL,
I need to genarate .xls file with multiple rows and and Columns and sent as an email.Since our customer having Problem with .CSV files need to genarate .XLS file.
Please do the needful.
Thanks
Madhu

Hi Madhu,
You might also consider using Excel Spreadsheet XML as the target structure (namespace is urn:schemas-microsoft-com:office:spreadsheet). When you double-click the resulting xml on a PC it automatically opens with Excel. So, users don't see a difference. It will open up a lot of options with formatting including creating multiple worksheets if you wanted to. Best of all you can stick with XML.
See my response in this thread:
Re: Convert XML data into XLS
Thanks,
-Russ

Similar Messages

Reading each value from spreadsheet file with delay (multiple rows and columns)

Hi,
a) I want to read EACH VALUE from a spreadsheet file having multiple rows and columns WITH DELAY. I am attaching my VI and sample datalog file for reference (tempsensor.txt).I need to do so because as soon as I read put ON the Sensor button on front panel, LV reads all the values at one go. I need the values for each temperature to be displayed after a delay.
b) Secondly, I would like to read another file containing the state of four antennas (deployed:1; undeployed:0). I am logging state of each antenna in each column of the file(magnet.txt) I need to have four LEDS on front panel to display state of the antennas. I dont know what I have done for antennas in my VI is right or wrong. I guess thats rhe wrong way to approach the problem. Please help!!!(column1: Antenna1 state ; Column2:Antenna2 state.. and so..on..)
Any help would be greatly appreciated!!
Thanks in advance,
Ratnesh
FYI: The first column in my datalog file represents timestamp(number of seconds elapsed), second column: reading for temperature sensor 1, third column: reading for temperature senosr 2, and so on. I am using approx. 11 temperature sensors.
Also, I have generated the log files for the reference purpose only. They do not represent the actual values. They are far away from actual values.
Attachments:
01032005.zip ‏30 KB

Look at this modified version of your VI. After looking at it, I determined that a shift reggister was not required in this case.
Lynn
Attachments:
MultiSensors.2.vi ‏85 KB

TO DRAW A TABLE WITH MULTIPLE ROWS AND MULTIPLE COLOUMNS IN FORM

Hi,
How to draw a table with multiple rows and columns seperated by lines in form printing?

check this
http://sap-img.com/ts003.htm
Regards
Prabhu

How to save data from JTable multiple rows and columns

Hi Y_Not thanks for your help before...
But what should I do if I want to get/save many data from many column and rows??

i don't quite understand your (repeated) question. what is the problem with "multiple rows and columns". Y_NOT and i have shown you ways to access them.
all you need are 2 loops: one around your number of rows and one around the number of columns or vice versa depending in which order you want to save things:
for (int col = 0; col < data.size(); col++) {
    for (int row = 0 ; row < data[col].size(); row++) {
        // save your data
        saveData(data[col].getElementAt(row));
        // or use yourtable.getValueAt(row, col);
}this is not a problem of Swing/Java but of simple algorithm...
thomas

Loading xml file with multiple rows

I am loading data from xml files using xsl for transformation. I have created xsl's and loaded some of the data. In an xml file with multiple row, it's only loading one (the first) row. Any idea how I can get it to read and load all the records in the file???

Could some please help me with the above. I desparately need to move forward.

Populate multiple rows and columns based off of a single cell

Does anyone know a way to populate multiple rows and columns based off of the input of a single cell. I'm trying to create a workout tracker that auto populates from a master list of workouts. Example, in A2 the user selects the workout from a drop down menu (St1, St2, St3, etc) and the workout is pulled from the master list and is populated into B2:C5.
I'm using =LOOKUP(A2,Master :: A2:A32,Master :: C2:C32) right now, but it's only drawing the top column. I'm looking for an edit for the formula (or completely new formula) that will place the info from the 1st column of the Master table into the 1st column of the Auto Tracker 1 table and then on down until the 4th column.
Here is a screen shot of what I have now:
And an example of what I'd like to accomplish:
Any and all help is appreciated, and please let me know if there is any more info that I can give that'd help out.

Hi Mike,
Your screenshots show that you have merged some cells in Column A of both tables. That may be the reason why the LOOKUP function is having trouble working out which range of cells to examine.
Hope this helps.
Regards,
Ian.

How do I delete multiple rows and columns in an image?

I am looking into how digital SLRs extract video data from a CMOS sensor. To give an example, the GH1 from Panasonic can record video at 1920 x 1080 from a 12 MPixel sensor that, say, is 4000 horizontal x 3000 vertical. How they do that seems to be not in the public domain, but there have been a few guesses (see http://www.dvxuser.com/V6/showthread.php?t=206797 and http://luminous-landscape.com/forum/index.php?showtopic=38713).
One approach would be to simply read every second row of sensor pixels (1500 rows read from the original 3000) and once you have those in memory, delete every second column (2000 columns left). You would end up with a 2000 x 1500 image which could then be resampled to 1920 x 1080.
I'd like to simulate what the camera appears to be doing, by generating a 4000 x 3000 test image and then asking Photoshop CS4 to delete the appropriate rows and columns. It may not necessarily be every second row; the Canon 5DMk11 appears to read every third row, so I may need to delete two out of every three rows.
Can Photoshop do that sort of thing? If so, how?

Thanks for the suggestions. Yes, I did take a detailed look at your images, but they weren't 100% convincing because it wasn't clear just what was happening. And Adobe's explanation, after reading it again, explains nothing at all to someone who doesn't know how Nearest Neighbor works.
But you are correct -- Nearest Neighbor does effectively delete pixels. I proved it with the attached 6 x 6 image of coloured pixels (the tiny midget image right after this full stop -- you'll have to go to maximum zoom in PS to see it).
These are the steps to delete every second row and then every second column.
1. Select Image > Image Size.
2. Set Pixel Dimensions > Height to half the original (in this case set to 3 pixels).
3. Set Resample Image to Nearest Neighbor.
4. Click OK and the image shoould now consist of three vertical white strips and three vertical Green-Red-Blue stripes.
5. Repeat steps 1-4, but this time set Pixel Dimensions > Width to half the original (in this case set to 3 pixels). The image should now consist of three horizontal stripes Green-Red-Blue.
Just to make sure the method worked for every third pixel, I repeated the above steps but with 2 pixels instead of 3 and obtained the correct White-Green, White-Green pattern.
I resampled the Height and Width separately for the test so that I could see what was happening. In a real example, the height and width can be changed at the same time in the one step, achieving the same results as above.
Finally, how to explain how Nearest Neighbor works in the simple cases described above?
Division by 2
In the case of an exact division by two (pixels numbered from top leftmost pixel), only the even numbered rows and columns remain. To put it a different way, every odd numbered row and column are deleted.
Division by 3
Only rows and columns 2, 5, 8, 11... remain.
Division by N
Only rows and columns 2, 2+N, 2+2N, 2+3N... remain.
To put it simply, a resample using Nearest Neighbor (using an exact integer multiple) keeps every Nth row and column, starting from number two. The rest are deleted.

Multiple Rows and Columns selection on ALV

Hi all,
What is the best solution to allow the multiple selection or combination of selection (rows and columns) on an ALV ?
I would like to be able to select some rows and some columns and to get the result cells in order to update them.
Thanks in advance for your help.
David

Thanks Srinivas and Seela,
I forgot to precise that my ALV is dynamic, I used the method 'add_new_child_node'.
I tried the different possibilties with method attributes but I don't find the good attributes combination to allow columns selection.
I add also that I have to be able to select several no adjacent columns.
What do you think about this workaround :
Is it possible to add a line on my ALV with checkbox between the header line (with column title) and data line.
I will search using the method add_cell_variant but I don't know if it's possible with dynamic ALV.
Thanks.
David

Import Illustrator File with multiple layers and sublayers as composition retaining all layers and sublayers

I have drawn a country map with multiple layers and sublayers including streets, cities, rail lines, ...
Now I want to create a template for my collegues in After Effects.
For this I want to import the .ai file into After Effects retaining all sublayers and layers in compositions and subcompositions.
When I do that, I get the first couple of layers correctly, the other ones comes in one merged composition.
What can I do, to get all layers each as a layer in After Effects?
Yours, Raphael

Illustrator only imports the first level of layers. If you have groups or paths below you need to release the groups to layers. The layers will then be stacked in order as sub layers. Then you need to move them up.
The steps are to select a layer in the Illustrator layer panel, then without selecting any specific element in the layer click on the menu in the top right corner and select release to layers. All a elements in that layer will be converted to layers. Now select them all and drag them up above the original layer. This will leave the original layer empty and put all elements in new layers.
Here's a tutorial I did a zillion years ago which uses this technique to turn a blend into a morph.
Morphing With Adobe Illustrator. I hope this helps.

Retreiving Point location with JTable row and column

If I have the row and column in a JTable (in a JPanel), how do I get the Point location offset from the location Point of the JTable or JPanel ?

I think that this may do it.
Point objPoint = new Point( objTable_.getLocation() );
int intRow = objTable_.getSelectedRow();
int intColumn = objTable_.getSelectedColumn();
int intColumnWidth = objTable_.getColumnModel().getColumn( intColumn ).getWidth();
int intColumnMargin = objTable_.getColumnModel().getColumnMargin();
int x = (int) objPoint.getX() + ( (intColumn+1) * intColumnWidth) );
// perhaps * (intColumnWidth + intColumnMargin)
int y = (int) objPoint.getY() + ( (intRow+1) * objTable_.getRowHeight());
// perhaps * (objTable_.getRowHeight() + objTable_.getRowMargin())

Empty table with multiples rows and 2 columns for processing data

Hi,
I am very new to adobe forms. I have the requirement that the user will enter some data in the table rows and I should process them to update in a z-table as well as use that data for MB1A tcode. I am not sure what to use here. Which is the best. I dont know anything about webdynpro. Can it be done directly in SFP transaction without using web-dynpro?
Also if I need more rows I should give them the option to add rows. How does the submit button work here when the user enters the data in all the 10 rows.
I heard about web services and I know a little about it, can it be achieved though that? Please help me. I need to finish 4 forms like this and each form should take me to the next form level.
Kaps.

Hello!
You don´t have to tell me, I am the ABAP developer as well. I know that there is very little like ..."career" value in learning scripting in some obscure languages like Java script or Form Calc for Adobe forms. But trust me, you won´t have to learn much. You will have to learn how to manipulate the presence of form fields (or variable values, but that is the same like setting the presence to hidden, you only pass a constant or any other value).
In the mentioned guide, in the last chapter you can just copy and next paste the ready to use scripting bacis. I think you should find the add/ remove row scripts there as well.
The right scenario is not always easy to pick, consider this:
- how many forms at the same time will the user have to fill? (if one --> offline, if more --> portal/ WD)
- do you want the user to work with the NW portal? do you have licenses for the new users? (WD)
- how often will the people fill their forms? how important the processes are? how many values will come from the backend tables (like how many search helps you would use if you can)
etc. etc.
Hope that clarifies things a little for you
regards Otto

Trying to download xls file with IE7 but browser tries to download as htm

Hi!
I have got a problem with downloading files using a hyperlink.
I've got a hyperlink and i did set the url property to: /resources/file.xls
when using IE7 and clicking Save As... the save as dialog appears and suggests file.htm as the filename and the file typ is shown as: HTML Document
Firefox works fine, it suggests file.xls and the type as: Microsoft Office Excel 97-2003 Worksheet
Next i typed in the url of the resource folder: http://localhost:29080/myProject/resources/
The file was shown as file.xls in the directoy listing, but when i tried to download the file from here, both browsers behaved the same way as before.
gif-files and others worked fine in both browsers.
Does anyone have an idea?
greets,
Remi

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Nagging One-Time .exe files with multiple names and NO company name associated V.11.0.10

Multiple attempts to load and have an unsigned file execute multiple times a day. see below; Could these programs come from Adobe, and why would no company name be associated with the file?
WinPatrol ALERT: New or Changed Program – Startup Program
A new automatic startup program has been detected.
Type: RunOnce
Often required for software updates and new installations.
This program should only run once when you restart your computer.
This program could slow your computer by running in the background.
Was this program expected and something you want active all the time?
No description found.
Company name not included in this program
Accept Change / Reject Change?
CHANGE REJECTED each time.
Seems to display after opening a PDF file.
Date: 02/04/15
exe FILE NAME: 1423065554
02/05/15 1115AM
1423156848
02/05/14 1140AM
1423157865
02/05/15 1150AM
1423158578
02/05/15 1229PM
1423160904
02/05/15 0120PM
1423163901

Adobe had this issue Multiple RunOnce keys created | 11.0.10, 10.1.13 | Acrobat, Reader

ALV column header with multiple rows and ALV column header span

How could I have in an ALV a column header on several lines and/or a column header that spans on multiple columns?
i.e. I would like to have in an ALV two columns, each with it's own distinct header and additionally another column header for both of the columns, that spans across both columns. How could I program this?

Hi,
follow below mentioned code
SET THE LABEL OF THE COLUMN
DATA: hr_weeknum TYPE REF TO cl_salv_wd_column_header.
CALL METHOD lr_weeknum->get_header
RECEIVING
value = hr_weeknum.
CALL METHOD lr_weeknum->set_resizable
EXPORTING
value = abap_false.
hr_weeknum->set_prop_ddic_binding_field(
property = if_salv_wd_c_ddic_binding=>bind_prop_text
value = if_salv_wd_c_ddic_binding=>ddic_bind_none ).
set the text of the column
CALL METHOD hr_weeknum->set_text
EXPORTING
value = 'C Form'.
Regards,
Srini.

String into table with separate row and column bytes

Hello, well I have a string (coming from an I2C eeprom and then through RS232 via MCU) with this format --> byte1 byte2 byte3 byte4 byte5 \r byte1 byte2 byte3 byte4 byte5 \r and so on, the length of the frame isn't known, it depends on how many sensors have passed over its limit. I am having problems on plotting this information into a table, I don't know at all how to separate each byte in a column and each packet of five bytes in a row. I attached my vi with the example of two sensors information string, I am able only to plot the first sensor .Any help will be welcome.
Thanks in advance.
Regards.
Attachments:
string_to_table.vi ‏31 KB

This is working modification of your code
Message Edited by EVS on 08-26-2005 09:16 PM
Jack
Win XP
LabVIEW 6.1, 7.0, 7.1, LabWindows/ CVI 7.1
Let us speek Russian
Attachments:
Clip_5.jpg ‏53 KB

Downloading .xls file with multiple rows and Columns

Similar Messages

Maybe you are looking for