DPS Builder Error: The fulfillment server encountered a proplem with authentification

Hi,
I have to make an update to an app. The DPS Builder actually shows me the following error message on generating the app "DPS Builder Error: The fulfillment server encountered a proplem with authentification".
I use the DPS App Builder App 2.7.0.5.83975.
Thanks,
Yves

Creating a new app is only a temporary solution. I will try it for this app. But I have to organize the assets again. Saving the assets on your servers is/was a great idea, but if you have to create a new app after every update, this feature is completelly useless.

Similar Messages

  • Fulfilment server encountered a problem with authentication

    I am trying to create my first app using DPS app builder, all the step have been done correctly, however creating the app give the f
    ollowing error
    "The fulfillment server encountered a problem with authentication"
    Anyone face this before? how to solve this issue? I can't find anything in the guidline files

    Hello again
    The app rejected once again and here is the itunes message
    "We found that while you have submitted In App Purchase products for your app, the In App Purchase functionality is not present in your binary. "
    I am able test the development version of the app and I can see the folio inside it with an option to buy, I can't locate any error in the development side and I need more clarification from your side about the rejection, why the binary is rejected?
    There is nothing wrong from my side. my app is working on the testing version and everything is OK.
    You rejected the app because in-app purchase is not enabled as you claimed. but I can see the folio inside the app with an option to buy, nothing wrong and no error what so ever is facing me. why you rejected the binary?
    I really need your help to identify where the problem is, I have to get the viewer ready for sale July 1st. it is been rejected for couple of time and I am not sure why.
    Regards;
    Rafah Alkhatib
    CEO
    [email protected]
    http://www.reachsn.com
    Dubai, Riyadh, Amman

  • Send a message error: "The sync server failed to sync with the iphone"

    Itunes 11 send a message error the sync server falied to sync with the iPhone.
    Itunes does not sync contacs with my iphone

    i did this step. but still it says syncing failed... am having iphone 5 updated to 6.1.4 & itunes is updated to 11.0.4.. pls help!!

  • The fulfullment server encountered a problem with authentication

    Getting this error message when finishing the last step to create an app...

    Hello again
    The app rejected once again and here is the itunes message
    "We found that while you have submitted In App Purchase products for your app, the In App Purchase functionality is not present in your binary. "
    I am able test the development version of the app and I can see the folio inside it with an option to buy, I can't locate any error in the development side and I need more clarification from your side about the rejection, why the binary is rejected?
    There is nothing wrong from my side. my app is working on the testing version and everything is OK.
    You rejected the app because in-app purchase is not enabled as you claimed. but I can see the folio inside the app with an option to buy, nothing wrong and no error what so ever is facing me. why you rejected the binary?
    I really need your help to identify where the problem is, I have to get the viewer ready for sale July 1st. it is been rejected for couple of time and I am not sure why.
    Regards;
    Rafah Alkhatib
    CEO
    [email protected]
    http://www.reachsn.com
    Dubai, Riyadh, Amman

  • Connection error detected  fulfillment server  previously worked

    I am getting the mesage connection error detected.  Digital Editions could not connect to the fulfillment server.  Please make sure you are connected to the internet.    I am able to go on line to try and figure out the problem, but i can't move downloaded library book to ADE.  Why?  Do this regularly w/not many problems.  others are visual c++ runtime library, but book eventually can be loaded onto my Nook.

    Two possibilities, not sure if either will help but worth a try ...
    1) ~~~~~
    Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
    Uninstalling and reinstalling does not help.
    Unfortunately, it often then gives misleading error messages about what is wrong.
    A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
    This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
    Restart ADE, and then reauthorize with your (old) Adobe ID.
    In extreme cases on the mac, the following extra step has helped some people.  Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0
    2) ~~~~~~~~~
    There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
    (You can have them both installed at once if you like.)
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172
    Some people have found ADE trying to upgrade automatically. 
    It appears (not 100% sure) that if you install ADE2.0 as a new install (not as an upgrade) that your 1.7.2 will continue to run.
    Probably best to say no if 2.0.x installation asks if you want to migrate your library.

  • Provider-hosted Apps debug error: The remote server returned an error: (401) unauthorised

    Hi,
    Any help appreciated!!
    I'm getting this error: "The remote server returned an error: (401) unauthorised when I debug a provider-hosted app.  I get the error on this line:  
    HttpWebResponse response = (HttpWebResponse)request.GetResponse();
    See code below
    I created a high trust development environment following the instructions provided here:
    http://msdn.microsoft.com/en-us/library/office/fp179901(v=office.15).aspx and
    http://msdn.microsoft.com/library/office/fp179923
    I created a provider-hosted app with the intent to:
    create a SharePoint list in the appweb
    Use self-signed certificate, tokenhepler.cs and sharepointcontext.cs to retrieve current user context and access on SharePoint.  (No changes were made to tokenhelper.cs and sharepointcontext.cs)
    retrieve list items from the SharePoint list in a button click event handler on a default.aspx of the remote web
    What happens:
    The app is deployed successfully to the Dev site
    The SharePoint feature is deployed and activated
    The default.aspx page of the remote web loads
    The error (see image) is returned on clicking of the button
    My environment is an on-premise SharePoint 2013 with AD and my dev box is standalone windows 8.1 running Visual Studio Professional 2013 Update 3.
    The code block below is a copy of the default.aspx code-behind
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Web;
    using System.Web.UI;
    using System.Web.UI.WebControls;
    using Microsoft.SharePoint.Client;
    using Microsoft.IdentityModel.S2S.Tokens;
    using System.Net;
    using System.IO;
    using System.Xml;
    using System.Data;
    using System.Xml.Linq;
    using System.Xml.XPath;
    namespace Idea.GeneratorWeb
    public partial class Default : System.Web.UI.Page
    SharePointContextToken contextToken;
    string accessToken;
    Uri sharepointUrl;
    protected void Page_PreInit(object sender, EventArgs e)
    Uri redirectUrl;
    switch (SharePointContextProvider.CheckRedirectionStatus(Context, out redirectUrl))
    case RedirectionStatus.Ok:
    return;
    case RedirectionStatus.ShouldRedirect:
    Response.Redirect(redirectUrl.AbsoluteUri, endResponse: true);
    break;
    case RedirectionStatus.CanNotRedirect:
    Response.Write("An error occurred while processing your request.");
    Response.End();
    break;
    protected void Page_Load(object sender, EventArgs e)
    //// The following code gets the client context and Title property by using TokenHelper.
    //// To access other properties, the app may need to request permissions on the host web.
    var spContext = SharePointContextProvider.Current.GetSharePointContext(Context);
    //var spContext = new ClientContext("MySPDevInstance");
    //spContext.Credentials = new NetworkCredential("username", "password");
    //using (var clientContext = spContext.CreateUserClientContextForSPHost())
    // clientContext.Load(clientContext.Web, web => web.Title);
    // clientContext.ExecuteQuery();
    // Response.Write(clientContext.Web.Title);
    string contextTokenString = TokenHelper.GetContextTokenFromRequest(Request);
    if (contextTokenString != null)
    // Get context token
    contextToken = TokenHelper.ReadAndValidateContextToken(contextTokenString, Request.Url.Authority);
    // Get access token
    sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
    accessToken = TokenHelper.GetAccessToken(contextToken, sharepointUrl.Authority).AccessToken;
    // Pass the access token to the button event handler.
    Button1.CommandArgument = accessToken;
    protected void Button1_Click(object sender, EventArgs e)
    // Retrieve the access token that the Page_Load method stored
    // in the button's command argument.
    string accessToken = ((Button)sender).CommandArgument;
    if (IsPostBack)
    sharepointUrl = new Uri(Request.QueryString["SPAppWebUrl"]);
    // REST/OData URL section
    string oDataUrl = "/_api/Web/lists/getbytitle('Diagrams In Idea Generator')/items?$select=Title,Diagram,SharingStatus";
    // HTTP Request and Response construction section
    HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(sharepointUrl.ToString() + oDataUrl);
    request.Method = "GET";
    request.Accept = "application/atom+xml";
    request.ContentType = "application/atom+xml;type=entry";
    request.Headers.Add("Authorization", "Bearer " + accessToken);
    HttpWebResponse response = (HttpWebResponse)request.GetResponse();
    // Response markup parsing section
    XDocument oDataXML = XDocument.Load(response.GetResponseStream(), LoadOptions.None);
    XNamespace atom = "http://www.w3.org/2005/Atom";
    XNamespace d = "http://schemas.microsoft.com/ado/2007/08/dataservices";
    XNamespace m = "http://schemas.microsoft.com/ado/2007/08/dataservices/metadata";
    List<XElement> entries = oDataXML.Descendants(atom + "entry")
    .Elements(atom + "content")
    .Elements(m + "properties")
    .ToList();
    var entryFieldValues = from entry in entries
    select new
    Character = entry.Element(d + "Title").Value,
    Actor = entry.Element(d + "Diagram").Value,
    CastingStatus = entry.Element(d + "SharingStatus").Value
    GridView1.DataSource = entryFieldValues;
    GridView1.DataBind();
    Any ideas what I might be doing wrong

    Hi ,
    Use the below code
    Public string GetAccessToken(){
    string sharePointSiteUrlHost =  Page.Request["SPHostUrl"].Tostring();
    string AccessToken = tokenHelper.GetS2SAccessTokenWithWindowsIdentity(sharePointSiteUrlHost, Request.LogonUserIdentity);
    return accessToken;
    Than initialize the ClientCOntext with the below Method
     private static ClientContext GetClientContextWithAccessTokenString(string targetUrl, object accessToken)
                ClientContext clientContext = new ClientContext(targetUrl);
                clientContext.AuthenticationMode = ClientAuthenticationMode.Anonymous;
                clientContext.FormDigestHandlingEnabled = false;
                clientContext.ExecutingWebRequest +=
                    delegate(object oSender, WebRequestEventArgs webRequestEventArgs)
                        webRequestEventArgs.WebRequestExecutor.WebRequest.UserAgent = "Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)";
                        webRequestEventArgs.WebRequestExecutor.RequestHeaders["Authorization"] =
                            "Bearer " + accessToken;
                return clientContext;
    use this clientCOntext and it will work.
    Do not use
    SharePointContextProvider
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

  • Proxy Error ( The ISA Server denied the specified Uniform Resource Locator

    Dear All,
       I am getting one error in ABAP proxy configuration,
      following is the error.
    ~response_line     HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL).  )
    ~server_protocol     HTTP/1.1
    ~status_code     502
    ~status_reason     Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL).  )
    via     1.1 BLRSPRX10001
    connection     close
    proxy-connection     close
    pragma     no-cache
    cache-control     no-cache
    content-type     text/html
    content-length     4070
        suddenly one day this error occured.  proxy configuration was working earlier fine. SLDCHECK also working without any problem now also. but in SPROXY it is saying no connection to ESR. only local objects.
    Please help me.
    Regards
    Pradeep P N

    Hi Pradeep,
    What is this BLRSPRX10001?
    IF it is rfc destination, then check the user.
    This problem is related to user rights. The user used there might not have sufficient authorizations to invoke the proxy. (may be the authorization is expired)
    Regards
    Suraj

  • BizTalk to Web Service - Error - The remote server returned an error: (403) Forbidden.

    Hi Everyone,
    I am connecting to an external web service from my biztalk application through a dynamic send port.
    When my biztalk application is trying to send the request message to the web service through the send port, I am getting the following error :
    The remote server returned an error: (403) Forbidden. 
    The external web service team have provided a certificate and a private key to install in my server. 
    I have installed the certificate by double click the .pfx file using the private key and have added the certificate in the host ProcessHostx64. 
    Still i am getting the same error.
    Can someone help on this issue ?
    Many Thanks,
    Anand
    S B A

    The Private Key should be installed under the user running the BizTalk Server Host. Please confirm that you have done this?
    If so, try to make this work in a small .NET test Application before porting it to BizTalk, so that you can confirm that you do have sufficient credentials to call the Service.
    Morten la Cour

  • How to solve the error " The installation process encountered an error while installing Shared Technologies.

    I had bought the adobe photoshop elements 12 online and I am not able to complete my installation although i tried many times . An error "The installation process encountered an error  while installing Shared Technologies. Please restart your computer and try again" occur

    Photoshop Elements 12 fails while installing sh... | Adobe Community

  • Error: The XML parser encountered an Error

    Error: The XML parser encountered an Error, and could not complete the conversion for portlet id=6,343, it returned the following message: XML Parsing Error.
    I am a beginning portal developer and need help identifying what is causing this error. I have gone into navigator, clicked the provider tab then clicked on the provider that I wanted to work with and got the above error. Can anyone tell me what is wrong.

    Please try posting your question to the Oracle Portal Development Kit (PDK) forum.
    null

  • Adding server in DAG failing with error Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25) failed with 0x800706ba. Error: The RPC server is unavailable

    Hi, Below is teh environments
    DC: Win 2008 R2 SP1
    Exchange Server OS: Win  2012  R2 Std 
    Exchange : 2013 SP1 Ent
    Two Servers with CAS+MB role, already part of one DAG. I am trying to add one new server in existing DAG. The installation of exchange 2013 competed successfully. However when i am adding it to the existing DAG, the below error is coming. Please help
    to solve the issue. Thanks in advance.
    A server-side database availability group administrative operation failed with a transient error. Please try the operation again. Error: An error occurred while attempting a cluster operation. Error: Cluster API failed: "AddClusterNode() (MaxPercentage=25)
    failed with 0x800706ba. Error: The RPC server is unavailable" [Server: cluster owner FQDN]
    Manu

    Hi Manu,
    As Deepak mentioned, please try to enable IPv6 on all member servers first.
    Based on my research, In Microsoft Exchange Server 2013, IPv6 is supported only when IPv4 is also installed and enabled. If Exchange 2013 is deployed in this configuration, and the network supports IPv4 and IPv6, all Exchange servers can send data to and
    receive data from devices, servers, and clients that use IPv6 addresses.
    Please also configure or disable Firewall to allow the connection.
    Thanks
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Mavis Huang
    TechNet Community Support

  • "Digital Editions could not connect to the fulfillment server. Please check your internet connection."  This is the message I get, yet my internet connection is good.  Help!

    "Digital Editions could not connect to the fulfillment server. Please check your internet connection."  This is the message I get, yet my internet connection is good.  Help!

    we dont have a answer

  • J2ee connection error, "The Message Server did not respond within 60 sec"

    Hi,
    I am facing the error "The Message Server did not respond within 60 sec. Please check if the message server is running.." when connecting to J2ee through NWDS.
    I am able to reach the index page via http://<ip address>:53500/index.html but yet unable to reach through NWDS.
    I have tried various combinations of host and port names like:
    Message Server Host : <ip address>, <host name>
    Message Server Port : 3636, 3936
    but still no luck.
    I've also cross checked the value of message server port by navigating to http://<IP address>:53500/monitoring/SystemInfo too, it is 3636.
    The telnet test (telnet <ip address> <port Number>) draws a blank window.
    I know this problem has been posted again and again, but then I am unable to understand what is the solution to this.
    Can someone please help me in resolving this issue?
    Note: [link 1|Unable to Connect to the J2EE Server from Netweaver Developer Studio; & [link 2|Developer Studio:Exception:The message server did not respond within 60 sec; are already checked.

    Hi Robin,
    Although I still haven't received any info from my colleagues regarding the central instance..
    Just a quick query, if we have NW04 we use 36** and if it is NW04S then we use 39** , is this the only difference for message server port?
    If that is the case, as I mentioned earlier, I have tried both, and one gave me N/A(3936) while the other gave me 'message server did not respond' error(3636).
    I have the message server host name & port , Enqueue Server Host name & Port and SDM PID and Port details with me..
    Can this be anyway useful in establishing a connection?
    Waiting for your inputs...
    Best Regards,
    Vinay

  • The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

    When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
    error 0x80042316"
    The odd thing is that when I start the backup manually, it works fine. When  it runs automatically the error appears.
    When doing a SFC /scannow I do get errors that can't be corrected.
    Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

    Hi,
    0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
    Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
    Meanwhile please provide the result of:
    vssadmin list providers
    vssadmin list writers
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
    Hi,
    I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
    Also:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Provider name: 'Microsoft Software Shadow Copy provider 1.0'
       Provider type: System
       Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
       Version: 1.0.0.7
    AND:
    vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
    (C) Copyright 2001-2005 Microsoft Corp.
    Writer name: 'System Writer'
       Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
       Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
       State: [1] Stable
       Last error: No error
    Writer name: 'SqlServerWriter'
       Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
       Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
       State: [1] Stable
       Last error: No error
    Writer name: 'ASR Writer'
       Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
       Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
       State: [1] Stable
       Last error: No error
    Writer name: 'Shadow Copy Optimization Writer'
       Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
       Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
       State: [1] Stable
       Last error: No error
    Writer name: 'COM+ REGDB Writer'
       Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
       Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
       State: [1] Stable
       Last error: No error
    Writer name: 'Registry Writer'
       Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
       Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
       State: [1] Stable
       Last error: No error
    Writer name: 'DFS Replication service writer'
       Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
       Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
       State: [1] Stable
       Last error: No error
    Writer name: 'Dhcp Jet Writer'
       Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
       Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
       State: [1] Stable
       Last error: No error
    Writer name: 'NTDS'
       Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
       Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Metabase Writer'
       Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
       Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
       State: [1] Stable
       Last error: No error
    Writer name: 'BITS Writer'
       Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
       Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
       State: [1] Stable
       Last error: No error
    Writer name: 'IIS Config Writer'
       Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
       Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
       State: [1] Stable
       Last error: No error
    Writer name: 'WMI Writer'
       Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
       Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
       State: [1] Stable
       Last error: No error
    Writer name: 'NPS VSS Writer'
       Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
       Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
       State: [1] Stable
       Last error: No error

  • Server Admin keeps dispaying error "The service has encountered an error."

    All the services in the Server Admin function are continuously displaying the following error message:
    The service has encountered an error.
    Try to refresh the view (servername.local/servicename). (kNetworkError)
    I press OK and the message disappears, but I have to go through every service to remove this message, and then it just reappears a little later. But it doesn't seem to affect the operation of the server, but I'm concerned that this is disguising a future problem and would like to get rid of this occurring. I have searched the forums and found nobody to help me. Please can anyone help me?
    Message was edited by: Viking Marauder

    Thanks guys, it seems this is a feature of the operating system and Apple have not bothered to find a solution, maybe because you're not supposed to leave the server admin open for long periods of time. A little disappointing, however it does not seems to be causing any other problems with the server as it is running perfectly well.
    Thanks to everyone for your input, I'll close this issue now, and as Jamie Curmi stated this may be resolved in the next release of the OS.

Maybe you are looking for