Drag and drop problem from wizard inside another drop

I am using JDK 1.5.0_11 Swing.
I am facing a Drag and Drop problem which is described below:
A drag and drop operation invokes a wizard, from which another wizard is invoked. Within one of the panels of this 2nd wizard, I am trying to do a drag and drop from a JTextarea to a JTree node, but am NOT able to. I am not getting any exceptions. I have written a transfer handler for the JTree node to handle the text transfers from a JTextArea. When I try to do a drag and drop from a JTree node to another JTree node I'm getting the 'InvalidDNDOperation: drag and drop in progress' exception.
When the 2nd wizard is invoked directly, I am able to do the drag and drop from JTextArea to a JTree node and also from a JTree node to another JTree node.
I tried spawning a new thread for the 2nd wizard, but am still unable to initiate drag and drop.
Should I be spawning a new thread for the 1st wizard?
Message was edited by:
sbandyop

Please post Swing questions in the Swing forum: http://forum.java.sun.com/forum.jspa?forumID=57

Similar Messages

HT5622 I can't drag and erase Skype from my I mac. What shall I do?

I can't drag and erase Skype from my I mac. What shall I do?

Just to confirm the method you are using - open the Applications folder, locate Skype, drag it to the Trash, empty Trash. Does this not work?

Launch and edit problem from Dreamweaver to Fireworks

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266405159_588474
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi
Not sure if this is a Fireworks or Dreamweaver problem but
here goes.
I¹ve created a graphic in Fireworks CS3 on the Mac and
Exported the HTML and
related images. I open the HTML file in Dreamweaver CS3, all
fine so far.
Then I highlight the table and click the Edit in
Fireworks¹ button and it
throws up a warning dialogue saying Cannot launch and
edit. The Fireworks
table could not be found in the HTML. Please export from
Fireworks and
re-import the HTML into Dreamweaver.¹
What?!!
I¹ve only just exported it from Fireworks! It¹s
even got the Fireworks table
code in the Code section, so what¹s going here?
Has anyone else had this?
Gaz
--B_3266405159_588474
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
Hi<BR=
>
Not sure if this is a Fireworks or Dreamweaver problem but
here goes. 
I’ve created a graphic in Fireworks CS3 on the Mac
and Exported the H=
TML and related images. I open the HTML file in Dreamweaver
CS3, all fine so=
far. Then I highlight the table and click the
‘Edit in Fireworks&#821=
7; button and it throws up a warning dialogue saying
‘Cannot launch an=
d edit. The Fireworks table could not be found in the HTML.
Please export fr=
om Fireworks and re-import the HTML into
Dreamweaver.’ 
What?!! 
I’ve only just exported it from Fireworks!
It’s even got the Fi=
reworks table code in the Code section, so what’s
going here? 
 
Has anyone else had this? 
 
Gaz
</BODY>
</HTML>
--B_3266405159_588474--

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266407908_747577
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
When you export the sliced graphics from Fireworks it places
them into a
table. In my instance the code says...

So it recognises Fireworks was the the graphics app and jumps
back to it
when you want to edit the image. Fireworks then displays (or
should) a
Done¹ button over the window. You do your alts and
press Done to update the
HTML and graphics back in Dreamweaver automatically.
That¹s the only table I was referring to Murray.
On 4/7/07 3:02 pm, in article
[email protected], "Murray
*ACE*" <[email protected]> wrote:
> Why would you be wanting to edit the table in a graphics
editor, instead of
> an HTML editor?
--B_3266407908_747577
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Re: Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
When =
you export the sliced graphics from Fireworks it places them
into a table. I=
n my instance the code says... 
 
 
 
So it recognises Fireworks was the the graphics app and jumps
back to it wh=
en you want to edit the image. Fireworks then displays (or
should) a ‘=
Done’ button over the window. You do your alts and
press Done to updat=
e the HTML and graphics back in Dreamweaver
automatically. 
That’s the only table I was referring to
Murray. 
 
On 4/7/07 3:02 pm, in article
[email protected], "Murr=
ay *ACE*"
<[email protected]> wrote: 
 
> Why would you be
wanting to edit the table in a =
graphics editor, instead of 
> an HTML editor? 

</BODY>
</HTML>
--B_3266407908_747577--

How to drag and drop item from list to another item in list and change their positions

I have a list field with multiple items. I want to select one item from list and drag and drop to another item in the list
after drop item on another item the position of items should be change. (Example:- if I select 1st item from list and drag and drop this item to 4th item in list after drop that item position of both item should be changed 1st item on 4th position and 4th item on 1st position)
I don't know how to do this.Please help me to find the solution.

Hello Zoltan,
I do not believe that kind of option is built into the listboxes, but I was able to have similiar functionalities using property nodes. I have included an example program that I put together.
The big difference is that instead of dragging, you double click on the item you want to transfer. To highlight items as you go down the list, all you need to do is set the value to that list number.
Hope this helps you out!
Attachments:
Temp.vi ‏33 KB

Cannot drag and drop image from Safari to Desktop - drop location is unavai

Drag and drop an image from Safari 2.0.4 to the Mac OS X 10.4.10 Desktop does not save it. Console says:
"drop location is unavailable"
Control click over the image and "Save Linked File to the Desktop" works as expected.
Any hint most welcome. Thanks.

Why not simply adjust the link for the image in the Links palette? Certainly could be contained in an action, if need be for duplicating and exporting multiple images...
Mylenium

Retreiving the file names from directory inside another directory from application server

Hi,
I had a problem in retreiving the file names from a directory inside another directory.
I tried using the FM's SUBST_GET_FILE_LIST, RZL_READ_DIR_LOCAL and EPS_GET_DIRECTORY_LISTING
But here I am getting only one directory details.
Actually my file is located a directory inside one more directory and one more directory and inside the files are located.
i.e total 3 directories inside the 3rd one my files are there.
I need to read the latest file name in the directory.
So that i can do some manipulation after getting the file name.
Is there option like OPEN DATASET , READ DATASET and CLOSE DATASET?
Can anyone please let me know How can i acheive this one.
Regards
Ram

Hi Ram,
Following thread can be helpful for you, were it shows in the tables structure rsfillst a field RSFILLST-TYPE whether its a directory or file..........
http://scn.sap.com/thread/865272
thanks and regards,
narayan

Get the ID of a dynamically created symbol from library, INSIDE another symbol.

Hi everyone,
I'm trying to get the id from a dynamic created symbol from library.
When dynamically creating the symbol directly on the stage (or composition level), there's no problem.
But I just can't get it to work when creating the symbol inside another symbol.
Below some examples using both "getChildSymbols()" and "aSymbolInstances"
// USING "getChildSymbols()" /////////////////////////////////////////////////////////////////////////
// ON THE STAGE
var m_item = sym.createChildSymbol("m_item","Stage");
var symbolChildren = sym.getChildSymbols();
console.log(symbolChildren[0].getSymbolElement().attr('id')); // ok eid_1391853893203
// INSIDE ANOTHER SYMBOL
var m_item = sym.createChildSymbol("m_item", sym.getSymbol("holder").getSymbolElement());
var symbolChildren = sym.getSymbol("holder").getChildSymbols(); // Am i using this wrong maybe?
console.log(symbolChildren.length) // returns 0 so can't get no ID either
// USING "aSymbolInstances"" //////////////////////////////////////////////////////////////////////////
// ON THE STAGE
var m_item = sym.createChildSymbol("m_item","Stage");
console.log(sym.aSymbolInstances[0]); // ok (i guess) x.fn.x.init[1] 0: div#eid_1391854141436
// INSIDE ANOTHER SYMBOL
var m_item = sym.createChildSymbol("m_item", sym.getSymbol("holder").getSymbolElement());
console.log(sym.getSymbol("holder").aSymbolInstances[0]); // Javascript error in event handler! Event Type = element
In this post http://forums.adobe.com/message/5691824 is written: "mySym.aSymbolInstances will give you an array with all "names" when you create symbols"
Could it be this only works on the stage/ composition level only and not inside a symbol?
The following methods to achieve the same are indeed possible, but i simply DON'T want to use them in this case:
1) Storing a reference of the created symbol in an array and call it later by index.
2) Giving the items an ID manually on creation and use document.getElementById() afterwards.
I can't believe this isn't possible. I am probably missing something here.
Forgive me I am a newbie using Adobe Edge!
I really hope someone can help me out here.
Anyway, thnx in advance people!
Kind Regards,
Lester.

Hi,
Thanks for the quick response!
True this is also a possibility. But this method is almost the same of "Giving the items an ID manually on creation and use document.getElementById() afterwards".
In this way (correct me if i'm wrong) you have to give it an unique ID yourself. In a (very) big project this isn't the most practical way.
Although I know it is possible.
Now when Edge creates a symbol dynamically on the Stage (or composition level) or inside another symbol it always gives the symbol an ID like "eid_1391853893203".
I want to reuse this (unique) ID given by Edge after creation.
If created on the stage directly you can get this ID very easy. Like this;
var m_item = sym.createChildSymbol("m_item","Stage");
var symbolChildren = sym.getChildSymbols();
console.log(symbolChildren[0].getSymbolElement().attr('id')); // ok eid_1391853893203
I want to do exactly the same when created INSIDE another symbol.
var m_item = sym.createChildSymbol("m_item", sym.getSymbol("holder").getSymbolElement());
Now how can I accomplish this? How can I get the Id of a dynamically created symbol INSIDE another symbol instead of created directly on the stage?
This is what i'm after.
Thnx in advance!

HT1933 When I was syncing my iphone 4 to computer my itunes crashed and started flipping from one to another. So I had to reset my iphone, which erased on my songs on my phone. Know all the recent songs i purchased are not on my itunes account for the l

When I was syncing my iphone 4 to my computer my itunes crashed and was looping from one song to another. so i tried all the suggestions and had to reset my iphone which wiped out all my songs. when I went to purchases my recent song purchases from itunes where gone.. how do I get them back or get credit for them..

nevermind, i figuered it out

Copy and paste image from PDF to another application

how do you copy and paste an image from PDF into another application such as Word or Excel? I know how to copy>> hover cursor over picture until it turns into a select "+" tool, select and right click to copy but when I try to paste it into another application, its loses all of its formatting. Thanks

Not sure what you mean by formatting of a picture. You can export all images and get a files to import to word. You can also use the snapshot tool, though it captures a screen copy. If you select an image and copy, my experience has been that it will only copy to PhotoShop, but it is not something I do very much. If the image is part of the document (not markup like a stamp or such), you can use the select tool to select the image and copy it to the clipboard. Just tried it and it worked fine. If it is a stamp (like pasted in), then you can not copy it in this way, if at all.

Transfering ringtones and notification tones from Z3 to another Z3?

Hello,
How to transfer ringtones and notification tones from my Z3 to my wife´s Z3? I tried to set both Z3´s together but nothing happens except odd sound. Yes, Bluetooth were on too - not only NFC - yep both phones...
Thanks :-)
Pingu

Hello,
I wish to transfer my iPhone m4r ringtones/notification tones/alarms to my new Xperia Z3 phone - so how to do this? I created those tones by Ringtonium app so those tones are not bought ones. Those files are on my Mac laptop. I tried to use Xperia Transfer Mobile to transfer those files but it didn´t accept. I could find them - even made a folder for those files but they just appered to be gray colored meaning that I can´t select them even I could see them :-(. If possible to transfer them somehow I would be very thankful - just wouldn´t like to make them once again as there are plenty of them....
Many thanks in advance for your help :-)
Pinguuu

Black Screen on MBP, Can hear chime and can boot from HDD via another MBP!

Hope someone can help me here, as I'm at my wits end.
I've got two issues, one with my MacBook Pro 17in, 4GB RAM, 160GB 7200rpm (2008) and another with my iMac 24in. 4GB RAM, 500GB 7200rpm (2009).
Firstly the MBP, left work on Thursday last week, got home, powered up the MBP and got a black screen!!! Tried resetting PRAM, SMC, booting in safe mode, removing and re-installing RAM, removing battery and mains power and leaving off overnight etc etc, yet nothing happens. Benn all over the forums and have not found any solution to get my beloved MBP working on it's own. I can boot off the HDD using another MBP 15in, re-install Snow Leopard and as far as I can tell the HDD is fine, as I have run disk utility and it tells me the HDD is OK.
I can't figure this out and it's doing my head in, as I use this laptop for business use and just can't afford to go out and buy another Mac. I should point out that this MBP never had any issues when running on Leopard, but ever since I upgraded to Snow Leopard, I have had nothing, but trouble. I did a clean install, in fact I have done it at least twice, even erasing the HDD securely, both at 7pass and 35pass, yet I have had permissions issues regularly and on the odd occasion, I have also had the problem of the HDD not being recognised.
The iMac is nearly the same, but the screen is working, although the iMac doesn't see the HDD no matter what way I do, again, reset PRAM, SMC, safe boot etc etc. In truth the iMac has been a lot more unreliable, but with the screen working, if I can get any solutions here, then I'll be working to work on that without the need or hassle of working via another.
I think that the MBP is only just still under warranty, but the iMac definitely is, but I need at least one working for business use, so really only want to let Apple have one at a time to look at/repair etc.
Ideally, as the HDD is working in the MBP, if I could get a solution to the black screen issue, then I could do without the iMac for whatever time it takes, so if there is anyone out there that can help, I'd be so grateful.
One last thing, when I bought the iMac 24in., I also bought an iMac 20in., but I never upgraded the 20in. to Snow Leopard and to this day, it has worked flawlessly, without a single issue ever.
Perhaps, I'm getting paranoid here, but there seems to me to be a link between the ongoing and regularly occurring problems with both Macs ant the upgrade to Snow Leopard. Why also, or is it just pure unadulterated coincidence that both the MBP and the iMac 24in have failed at pretty much the same time??!!!!
I'm going mental here, so I hope someone out there has a better fix, then me overdosing on Prozac!!
PS
I'm not a mac expert, not good with a soldering iron either, but I'm capable of following good instructions.

Concerning your imac, have you tried installing the OS on an external drive and running the iMac from that? My friend in Texas had her iMac's hard drive vanish, so we installed the OS on an external FireWire drive I happened to have and then restored her data from a recent backup. So far I haven't had time to install the drive in her iMac, so it's been running off of the external for a long time now. Perhaps you could do something like that so you could at least have the use of the iMac while your MBP is in the shop. Once you get the MBP back, you can send in the iMac.
Be sure to report both of these to Apple and get case numbers so that you can document that the issues started while you were still under warranty--especially for the MBP that's about to go out of warranty.
Good luck!

How can I get rid of "History and Bookmarks" section from the search history drop down menu in safari 6.0.2?

Let's just say I have saved bookmarks of things that i do NOT want my friends to see when they use my computer occasionally. I know they could go and find these bookmarks anyway in the bookmarks menu but they dont snoop around my computer. i would rather it not just pop up when they go to search for something or type in a webpage. If there is no way to customize what shows up in the drop down menu for search results then that is something apple overlooked. Not everybody wants things all in one place. Whats the point of deleting search history and website history if its just going to show the certain things you have bookmarked? Any solution to this would be appreciated. One solution i thought would work was disabling search from suggesting, but i guess that only supresses the webpages not the url/search bar. Oh and this is for safari 6.0.2 please dont give me outdated advice.
Thanks

Activate the Guest account for your friends and keep your account for yourself.

Loading EMF and Conversion Problem from EMF to SVG in Adobe illustrator CC

Hello,
I have downloaded trial version of adobe illustrator CC.
I am importing .emf file into adobe illustrator CC. it loads an emf file properly with its content but my emf file contains some lines(--------) also..imported emf file doesn't show any line.
My main motive is convert this emf file into svg file. but as because my emf file is not imported properly, so as with SVG.
Ask one more important thing, why converted svg file from emf appears to be having different fonts and margins.
Kindly help

The problem is once I finished with the art, I deleted the template, and there's a big art board there and it's in the way, I don't want it to affect the size and dimensions of the channel art. I just need it to be 2560px by 1440px wide, is there any way I can save it exactly like that?
Not sure what you mean by "it's in the way."
The size of the artboard doesn't necessarily affect the "size of the art." (There are some workflow scenarios where the artboard size is recognized and utilized, but for the most part it is simply a 'passive' boundary.)
If your art is 2560px X 1440px, and you want the artboard to match, double-click the artboard tool and choose "Fit to Artwork Bounds" at the top of the preset menu.

Authorization and deauthorization problems from Migration Assistant?

I purchased a new MacBook Pro and used Migration Assistant to transfer everything from my old powerbook G4 running 10.4.6. The transfer was super smooth and everything is in its place. The only problem I'm having is with authorization and deauthorization and both computers.
My new computer prompts me for my login and password every time I click on a song I purchased in iTunes. It then proceeds to tell me that this computer has been been authorized and that 2 of 5 computers are currently authorized. The problem is when the authorization process is finished the song never plays so I click on it again and I get the same prompt for authorizing the computer again. It is the quintissential infinte loop and it happens on any song that I click on.
Problem two is deauthorization on the old computer. It is a reverse of the problem above. I go to deauthorize the computer and get the same prompt. I put in my log and pass and then I'm told that the computer has been deauthorized. The problem is that when I go to click on a song I purchased it still plays when it should not because the computer has been deauthorized.
My only guess is that something happened in the process of using migration assisant. I've tried throwing out the iTunes prefs but that doesnt work. I'd greatly appreciate any advice. Thanks in advance.
MacBook Pro 2Ghz Mac OS X (10.4.6)

THis is iTUnes for windows, post here for mac iTUnes http://discussions.apple.com/category.jspa?categoryID=149

Issues with freezes and HD problem from DU

I could write multiple pages about all the symptoms and everything that happened, but knowing that many won't read it anyway here is a short story of what happened to my MBP. Please help me out if you can!
Lately my MCP13 has been freezing and the only way was to get it out was shutting it off and turning it on. Once I couldn't boot it. Of course, I tried everything but the only solution was to boot it from the install disk and run disk utility. Many times the computer froze as soon as I launched DU or it could not find my MacintoshHD. After three times of rebooting, it detected the MacintoshHD and said that it is corrupt (number of volumes incorrect xxxxxy instead of xxxxxx). I repaired it and it seemed fine after one more check. Then I rebooted the computer and ran DU again. It said that the files were corrupt (same problem), I turned off the computer, launched it from the disk again and repaired it. Once I turn it on from MacHD I run DU again and it says that files are corrupt again.
Anything had similar issues? What should I do besides taking it to the AppleStore?
Thanks for reading this,

If it's under warranty, Apple will do it. If not, search the Apple Support site for the instructions for your model. Example:
MacBook Pro (13-inch, Mid 2009) - Hard Drive Replacement Instructions

Drag and drop problem from wizard inside another drop

Similar Messages

Maybe you are looking for