Dreamweaver MX 2004 in 10.5 - not qualified but working?

I own Dreamweaver MX 2004 and though I know it will never be supported, I want to know if it is functioning for people in 10.5 or 10.5.1??
I haven't been able to use it on the Leopard partition I'm testing yet, because it comes up wanting me to re-authorize the license when I launch it. And I don't want to do that just yet for fear that I could be using too many of my authorizations. I will be wiping this drive and completely reinstalling Leopard when the time comes. And it would be a shame to never again be able to authorize Dreamweaver MX 2004.
BTW, anyone know how many times we are able to authorize it over the internet in the lifetime of owning the software before we can never re-authorize it again?
I wipe my drives very often and reinstall for stability reasons and would hate to know that someday I could suddenly lose my ability to re-authorize a program I paid for.
thanks

Hi David:
Wondering if you have tried installing and running this. I use Studio MX 2004 including Dreamweaver periodically, but have been running it off my backed up Tiger. As far as authorising it. If you de-authorise before wiping the drive should be okay to re-input the key after re-installing. If you have any problems with the key you can call up Adobe and they are pretty good at helping you get re-activated.
JS

Similar Messages

MS Office 2004 reports "Word could not create the work file."

I have searched the world for the solution and apparently nobody else has this problem. When opening any document (.doc) Word will report "Word could not create the work file. Check the amount of disk space on your start up drive."
There are 40 gigs free. There is 2 gig of memory. It's the only app open.
Is there a solution to this problem other then not using Word at all?

I'm learning more about the doc file in question.
Evidently it was created on Windows about 4 years
ago. If I Save As... the file and click the
Compatibility button it complains about a missing
"linked" file. While this might be the cause of the
problem there doesn't seem to be any way of fixing it
short of finding a time machine and wacking the
creator before they wrote a word. If I go ahead and
save the document Word crashes and corrupts the
original file (err the back up of the back up of the
original file).
I think you may have to give up on this one.
A "linked file" is a reference pointer within the main word document that tells word to locate another file and incorporate it into the document by reference (but not include the actual contents of the linked file)
Since you say "If I Save As... the file and click the Compatibility button..." you can get into the document.
So try turning on invisibles, and find the reference to the linked file. You may also be able to find it by turning on Document Map.
Delete the link, and that should take care of the crashing problem.
Of course, your file will not be 'complete' but thats a differnet problem.

Dreamweaver CC 2014 Sync Settings does not appear to work for me...

I synced all of the settings from one computer to the cloud with all options checked.
Then when I import those settings on another computer that I installed dreamweaver on, it appears as though nothing is coming down. Sites info does not come down, my application preferences (code coloring specifically) don't come down.
I am at a total loss...

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Images are not loading - but work in Preview mode

Hi -
I was wondering if anyone can help me. I'm kind of new to Dreamweaver and I can't seem to figure this out on my own.
I'm using Dreamweaver 8. I developed a web page based on a template in which everything works perfectly in "Preview" mode on all browsers. But when I uploaded the files to my remote hosting, the template based images (found in the "images" folder) are not loading on the page. The images that I added to the template myself, found in the same "images" folder ($200,000 in ..., and picture at bottom) are loading. So some of the images in the images folder are loading some are not.
I've checked the Images folder on the remote site, and they all seem to be there. I've also checked for broken links, and I'm not getting any (I don't know if that would help w/ missing images or not, but I'm trying everything I can think of). I also checked to see if there is a separate CSS style sheet, and there wasn't one supplied with the template (there is some CSS info in the code on the html page). The image sizes are all small enough as well. Can anyone help me with this?
You can view one of the pages at: http://www.200kin5months.com/squeeze-video.html
Thank you in advance to anyone who might be able to help!
Stacey
PS - I've attached a screenshot from Dreamweaver Preview to show what it is supposed to look like.

Your Web server is running on an operating system that is case-sensitive. You appear to have uploaded an Images folder, but not an images folder.
You do not have a file here:
images/squeeze-video_425x344_r9_c6.jpg
But you do have a file here:
Images/squeeze-video_425x344_r9_c6.jpg
So you'll need to either change all your image/<whatever> links to point to Images/<whatever>, or upload another folder named images.
Or, if you want to use a single folder, and if your local file system is not case-sensitive, you might be able to do it in DW's file panel. Here is a method that you might use to have all of them in a folder named images.
BACK UP YOUR SITE FILES
Rename Images to Foo (allow DW to update links)
Rename Foo to images (allow DW to update links)
Upload the images folder and any/all files that DW changed
Delete the online Images folder
HTH
Mark A. Boyd
Keep-On-Learnin' :-)

My Temp Work around for my Outlook Sync with Z10 - Not Ideal but works.

I like many on this forum was pissed that Outlook Sync was not included with BlackBerry Link.. I was fortunate to transfer all my contacts & calendars from my Old Torch 9810 without a problem. The problem is that I need to sync my calendar and updated contacts on a regular bases. I use Outlook 2010 for all my 1400 contacts and Calendar. There is no way I am going to use any cell phone to update this amount of data. I have owned the Z10 since Tuesday Morning and that afternoon I was ready to take it back and I am a die hard BB user.. My wife has an Iphone 5, nice toy, but wont work for my business.. Seriously considered Android phone, but they also have their issues with the Outlook sync via USB..
But after 6 Days with the Z10, I must say I love it. .Didn't at first, but once you figure out, it is truly impressive.. Also love the virtual keyboard, very accurate and amazing.. Love the fact that I can have multiple applications running at the same time.. I use web pages that I need for work as an active screen and a button on my home page.
While waiting for a 3rd party application to implement this (Campanion Link & Deja Office) or to have BB realize that this is serious and add it in their BB link soon.. Cloud is not an option for me.
This is the temporary solution I have right now.
Option 1:
1. Wipe off all my Data of my old BB 9810. Make sure lates OS is installed. Delete all contacts. Sync with Outlook but from PC to Phone Only.. Use BB link to transfer the Contacts and Calendar to the Z10. This will replace any contact you have on the z10..
Option 2:
Forward any contacts from your outlook as vcard to your Z10 as email. Click on the .vcard and it will add to contacts.
Again this is a temp soltuion without 3rd party software or Icloud until BB adds this to BB link.

Yes it's back! ( and works! ) Thank you Apple!
Thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you, thank you.
Sometimes it's just the simple things...
My world is put back....
jeff
...now if we could just get double clicks on Folders in the Finder to open new windows.....
<sigh>

Battery will not charge, but works fine on ac.

I tried resetting the pmu, and using different ac adapters, but to no avail, sometimes the light on the power supply changes to amber, but the charge on the battery remains zero, any tips? (I press the button on the battery without the ac adapter and it flashes on the first green on the first LED for a few seconds and cuts out over)

Welcome to the Apple discussions.
When there are battery issues, typically one of three parts has an issue: the power adapter, the battery itself, or the logic board.
You can test your logic board using the OS X install DVD that came with your system (it will say in small print AHT Version x.x on it). Insert it, reboot holding the option key down, choose Apple hardware test, and follow directions.
How many charge/discharge cycles does the battery have on it? You can find this in the Tiger system profiler (click blue apple, about this mac, more info, power, battery information). Apple says a properly maintained battery should retain 80% of it's charge after 300 cycles. The Apple note on battery maintenance is http://www.apple.com/batteries/notebooks.html
Although different ac adapters didn't fix the problem, I'd assume they were working on other systems, so you've eliminated that as a cause.

MacBook Pro 2007 battery not recognized, not charging but working

I recently bought a new battery for my MacBook Pro 2007. As said in the title, it seems to work alright, but it's not recognized by the computer (X in the battery icon), and I don't think it's charging.
I tried to reset the SMC, no change. Unfortunately, I don't have any other computer to test my battery and my powercord on, to see if it's coming from either one of them. And I don't have an Apple Store around.
Do you have any suggestions ?

MacBook, MacBook Pro, MacBook Air: Battery not recognized after being fully drained

Finger print not unlocking but works with iTunes and Apple Store

So I have been battling this same issue since last week. I cannot unlock my phone with the FP scan but it will work when using the iTunes store or Apple Store app. Is there a setting I am missing?

Hello bdallas99,
Congratulations on your iPhone 5s, and thank you for the details of the issue you are experiencing when using Touch ID. I recommend following the steps below for an issue like this (steps 2 and 3 specifically stand out to me for the situation you described):
Troubleshooting Touch ID
Ensure that your fingers and the Home button are clean and dry.*
Note: Cover the Home button completely. Don't tap too quickly, don't press down hard, and don't move your finger while Touch ID is scanning.
Tap Settings > General > Passcode & Fingerprint > Fingerprints and verify:
Passcode Unlock or iTunes & App Store is enabled.
One or more fingerprints have been enrolled.
If one finger isn't working, tap Edit in Settings > General > Passcode & Fingerprint > Fingerprints > Edit to delete and then reenroll the finger.
If that finger still isn't working, try enrolling a different finger.
If you are unable to enroll any of your fingers, take your iPhone 5s to an Apple Retail Store, Apple Authorized Service Provider, or contact AppleCare for further assistance.
Find the full article here:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Thank you for using Apple Support Communities.
Best,
Sheila M.

Windows 7 not genuine, but work since I purchased the laptop.

I owned my t61 for 6 months without a problem, this morning I wake up turn it on and a small window states my copy of Windows 7 is counterfeit. So I can Microsoft, they stating I need the PRODUCT KEY and buy a new one for $199, + tax. I think this is just a scam with Microsoft.
I email the seller and he provided me with a Product key, so I call Microsoft back and now they tell my the Product Key is not valid and I still need to purchase and new Product Key.
Now I have to either downgrade to Vista, if I can get the CD's from Lenovo or go back to XP.
Anything I can do to or say to Microsoft get keep 7 alive on my laptop.
SGB

njdjh2o wrote:
I owned my t61 for 6 months without a problem, this morning I wake up turn it on and a small window states my copy of Windows 7 is counterfeit. So I can Microsoft, they stating I need the PRODUCT KEY and buy a new one for $199, + tax. I think this is just a scam with Microsoft.
It is an issue between you and the seller of the T61, as Lenevo has never supplied Windows 7 for a T61.
It appears that the seller has installed a copy of Win 7 using a key that was likely obtained at a too good to be true price from an eBay auction (or some similiar source). There are reports all over the Web of eBay sellers auctioing Technet or MSDN keys for Microsoft products in breach of the End User Licence Agreements for those keys. Microsoft later cancels those keys when it detects they are being used in breach of the relevant EULA that Microsoft supplied them under.
It is a SCAM, but not by Microsoft, so talk to the seller of your T61.
Cheers,
Bill
I don't work for Lenovo

Hyperion configtool GUI is NOT launching but works with -console

OS: Solaris 10 - Hyperion Version: 11.1.2.2
java: /usr/bin/java = 1.5.0_40
java: /u002/app/epmmgr/Middleware/jdk160_29/java = 1.6.0_29
swap: 20GB - Memory: 8GB
DISPLAY is set properly
We installed Hyperion 11.1.2.2 successfully without a single error in the installation logs. When it was time to execute the configuration tool, the (. ./configTool.sh) file would not launch the configuration GUI at all.
There are no error logs that indicate a problem or missing files. We have done 2 hours worth of checking files, verifying server configurations etc.
Note: We have looked at this document: 1088031.1
We ran the configtool with –console and there no issues as you see below. We would like to use the GUI instead.
OUTPUT FROM RUNNING (dot dot). ./CONFIGTOOL.SH –CONSOLE
sbx-sun216: . ./configtool.sh -console
Running preconfig checks...
Running EPM_ORACLE_HOME...
EPM_ORACLE_HOME environment variable value: /u002/app/epmmgr/Middleware/EPMSystem11R1
JAVA_HOME environment variable value: /u002/app/epmmgr/Middleware/EPMSystem11R1/../jdk160_29
EPM_ORACLE_HOME succeeded
Running .oracle.products ... .oracle.products succeeded
Running Jars manifest ...
Time spent for manifests parsing: 715 ms
Maximum jars depth achieved: 6, while restriction was: unrestricted
Parsed 446 manifests
Total jars and classpath entries encountered: 446
Total not-existing referenced classpath entries count: 43
Total classpath elements to check: 55
Jars manifest succeeded
Running Environment variables ...
EPMCFG-10223: Environment variable isn't set: TMP
Environment variable TMPDIR would be used
Environment variables succeeded
Running Inventory existence ... Inventory existence succeeded
Preconfig checks passed! Proceeding further
Select the EPM Oracle Instance to which the configuration would be applied:
Home directory for EPM Oracle instances:
[u002/app/epmmgr/Middleware/user_projects]:
sbx-sun216: echo $JAVA_HOME
/u002/app/epmmgr/Middleware/EPMSystem11R1/../jdk160_29
sbx-sun216: echo $JAVA_ARGS
-Xms256m -Xmx768m -XX:PermSize=64m -XX:MaxPermSize=256m -d64
Has anyone experienced such a problem? Please help? Your help will be greatly appreciate.
-Phillip

John, thanks alot for the information.
We tried your suggestion. The Solaris OS patch is not installed on the server. Also, the .hyperion.<hostname> file was missing in the /u01/app/emmgr home. We added it and we are still not successful. The issue is still there and there are no log files in the /diagnostics/log/config/configtool.log. The only lines being generated are:
INFO:Start Configuration
INFO:Start Configuration
INFO:Start Configuration
INFO:Start Configuration
contents of epmmgr home
drwxr-x--- 8 epmmgr dba 14 Apr 24 09:43 .
drwxrwxr-x 5 oracle dba 6 Apr 22 13:24 ..
-rw------- 1 epmmgr dba 4963 Apr 24 09:28 .bash_history
drwxr-x--- 2 epmmgr dba 3 Apr 23 09:08 bea
drwxr-x--- 2 epmmgr dba 82 Apr 23 08:42 .fontconfig
-rw-r--r-- 1 epmmgr dba 58 Apr 24 09:43 .hyperion.sbx-sun216
drwxr-x--- 3 epmmgr dba 3 Jul 13 2011 .java
-rw-r--r-- 1 epmmgr dba 136 Apr 17 10:25 local.cshrc
-rw-r--r-- 1 epmmgr dba 157 Apr 17 10:25 local.login
-rw-r--r-- 1 epmmgr dba 174 Apr 17 10:25 local.profile
drwxr-x--- 11 epmmgr dba 16 Apr 23 09:14 Middleware
drwxrwx--- 6 epmmgr dba 6 Apr 23 10:38 oraInventory
-rw-r--r-- 1 epmmgr dba 187 Apr 24 08:45 .profile
drwx------ 3 epmmgr dba 3 Jul 13 2011 .sunw
Thank you.

Says "did not respond", but works with test servers...

Hi all,
This one is driving me crazy! I recently bought an iSight camera and I'm now wanting to get it working with iChat and AIM. I'm behind a Linux firewall of my own construction (ClarkConnect / Fedora based) and at first I couldn't get it to connect to anything, with repeated errors saying that I "did not respond". However, after doing a lot of reading, I've opened up all of the required ports on the firewall and I can happily connect to the 'appleu3test01, 02, 03' servers.
However, attempting to connect to a PC running AIM brings back the "did not respond" error, and no amount of firewall twiddling seems to make it work. I've connected my Mac directly to the cable modem and this is the only way it will connect, and I've tried connecting to two different PCs in different locations. If I try to connect to a PC with AIM on my local network, there's no problem - I'm straight on - but going through the firewall just doesn't play.
I've also tried the trick of port-forwarding ports 16384-16403 to my Mac, but still no luck. Not tried connecting to a remote Mac with iChat yet, just because I'm the only person I know with all the right kit...
If anyone could lend their expertise I would really appreciate it - and so would my blood pressure! ;o)
Thanks in advance,
Andy.

Hi Zephyr,
With iChat launcged go to the iChat menu.
Log out of AIM
Go to the Preferences in the same menu.
Go to Accounts
Slect the AIm acount in question in the left hand list.
Now Click the Server Settings tab on the right.
This list the main connection port near the top but under the tabs.
Change this from port 5190 to prot 443.
Log back into AIM
Reason.
iChat logs on to AIM on port 5190.
It also uses Port 5190 to Group chat, send file and pics.
It does this over two interent Portocols
Now some modems need to be port forwarded on ports above a threshold of 1024.
Some go further and want Protocols listed.
Of those a small number will not let you Port Forward two protocols on the same port.
So moving the Login and basic text chat stuff to port 443 (a secure port below 1024) the problem is avoided.
9:10 PM Saturday; March 11, 2006

Iweb with Lion: Umlaute after ftp-upload on linux-Server are not correct - but worked with Leopard!

Hi from Germany. I used iweb 3.04 and OS X 10.6+ and everything worked fine on different websites, including German Umlaute ä, ö, ü, ß.
After upgrading to Lion all Umlaute are not correct spelled (strange letters) after ftp-upload on a linux-server (which is the same as before). Before upload these Umlaute are spelled correctly, but not after upload.
Trials were a) upload htaccess file b) use older iWeb 3.03 c) asking server administrator (answer: "use ae, oe, ue instead"), but nothing worked.
Any ideas or help?
Thank you very much, and excuse my english
Peter

The problem lies in the uploading of the files or the server itself. If the umlautes looked good on the server before then we have to think it's the uploading process. Try using the free FTP client Cyberduck to upload your site folder to your server. Then check to see if the rendering is correct.
What's the URL of your site so we can examine it first hand?

Comcast email Address Book will not open in FF; get message "Page Not Found" but works in IE

Disregard...now it works!!????

Reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
Let us know if this solves the issues you are having.

Phone does not ring but works in all other ways.

Hi All,
I have a quad set of BT7600 phones, and for some reason these have stopped ringing. This has been like this for a couple of months but I've been away so we have relied on mobiles for this time.
When I say 'stopped ringing' I mean just the noise - the phones show the caller display fine and you can answer the phone and speak to the caller if you see the incoming call - just no ring tone. Outgoing calls and ansaphone messages are also still fine.
I have BT infinity with the filtered socket - I have removed the faceplate and connected my master phone into this with the same result, everything fine except ringtone. I have also tried another cordless phone at the test socket with the same result (Eurotel elite 2825).
Any ideas how I can get this checked out? I'm pretty sure it must be wiring/settings fault outside the house because I've tested with 2 different phones at the master test socket.
Please don't ask me to call the indian no-help-line. I love my BT products, but over the years I've had so many lies and rubbish from them that if they are the only recourse to resolving the problem then I'll move to talk-talk or whoever - even if the service is inferior as long as it doesn't involve BT India.
Thanks,
Alan.

try live chat on this link https://bt.custhelp.com/app/contact#h=eyJzdGVwMCI6ImNvbnRhY3RJdGVtTGluazU2MjciLCJzdGVwSWR4IjoxLCJzdG...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Cannot activate Dreamweaver MX 2004 on Windows 7 64 bit pc?

Hello.
Does anybody in here know how to activate Dreamweaver MX 2004 on a Windows 7 64 bit pc?
I keep getting the message that there is an internet connection problem.
I have deactivated my firewall etc., but it doesn't help me.
Anybody got an idea? Adobe Chat does not have the answer for me!
Regards Anders Fj

Wow! Thank you. It Works! Clever!
This is really helpful for those
of us who are nore professionals. I only use Dreamweaver MX 2004 to
maintain and repair my own small homepage with photos. And I know how to
use Dreamweaver MX 2004 and I am not interested in learning new tools -
not now
ONE MORE QUESTION THOUGH: Where and how do I update my
Dreamweaver MX 2004 now that I have installed Dreamweaver MX 2004 on my
new Win 7 64 bit pc?
Regards
Anders Fjeldberg, Denmark
Ken Binney
skrev den 2014-05-04 00:01:
CANNOT ACTIVATE DREAMWEAVER MX 2004 ON
WINDOWS 7 64 BIT PC?
created by Ken Binney in _Dreamweaver
support forum_ - View the full discussion
>

Dreamweaver MX 2004 in 10.5 - not qualified but working?

Similar Messages

Maybe you are looking for