Dreamweaver treats multiple divisions in JavaScript like comments.

For example, if my code is:
var a = (b / 2) + (c / 2)
it will highlight:
/ 2) + (c /
as a comment. This is improper syntax highlight and very annoying. I want it fixed. How?

This is a known issue with Dreamweaver's syntax highlighting. The problem is that forward slashes in JavaScript are used as delimiters for a regular expression. So, Dreamweaver treats the value between the slashes as a regex.
The only way to get it fixed is to submit a bug report through the form at http://adobe.ly/DWBug. If sufficient people complain about this issue, it's more likely to receive the attention of the engineering team.

Similar Messages

Multiple Divisions in IS Retail

Hi,
If we maintain multiple divisions, what are the facts and implications? Due to wholesale business requirements, we want to create two divisions and want to have articles with either of these divisions. So, there will be one group of articles belonging to one division and another with other division. How and till what extent, this will impact on data maintainance point of view, processes point of view and system point of view?
Looking forward for the complete expalnation and solution if there is any!
Regards,
Dipti Chitalia

Hi Dipti,
If you maintain mulitple divisions,it would not be possible to sell it in POS stores,the very reason being the Listing and Assortment are possible only on the basis of the Sales organisation and Distribution channel but not on the basis of the division...
If the business requirement is such that these articles will only be sold via wholesale route and not on the POS route,then i think you can go ahead creating multiple divisions.
If the business requirement is such that these articles need to be sold in POS as well then in that case it would be advisable to create multiple distribution channels within the sales org created for wholesale
For eg : if 1000 being your sales org for Wholesale then you can have 2 distribution channels like 01- wholesale retail(POS) and 02- wholesale direct(normal sales)
Hope this info has been useful.
Rgds,
Aram K.

Add comments to multiple files w\different existing comments

hi all,
i've got several thousand songs that i'd simply like to add the word "album" to in the comments field. the problem is, most of them already have comments in that field, and most of these existing comments are unique to each song. so, when i select all the songs i want to add the new comment to and select "get info", the comment field defaults to an empty field. i'm afraid that if i type "album" in the comment field and press the "ok" button, it will over write all of the selected songs existing comments and replace them with the word "album" only. is that true? if so, is there a way to simply append comments to multiple songs with different existing comments?

Welcome to Apple Discussions, Lance. Yes, it's true that if you mass-update any of the ID3 fields you will replace whatever used to be in that field. All your comments would read "album."
I know of no way to append new info. You could, however, display the Comment filed in your library, then sort by it. All blank comments will be together at the top. Select them all, and add "album" to them. At least you'll have "album" on many/most of your songs.

Perform multiplication, division n get remainder without using arithmetic o

hello,
perform multiplication, division n get remainder without using arithmetic operators
thanks in advance
manasi

ram.manasi wrote:
i can program myself however i am new to programming and have no clue how to perform arithmmetic operations without using arithmetic operators n would like to know how to go about itwell, we're not your private code-monkeys nor are we tutors. We are usually best at answering specific questions but many of us get our hackles up when someone simply demands an answer. I suggest that you find out what your teacher is expecting of you here. I would guess that this involves some recursion, but it is up to you to find out. Do some work. Then if you have a specific question, please feel free to come back and ask for help. nicely.

How can I turn a recorded voice into multiple voices that sound like a group of singers?

I'm using Logic Pro 9. Could someone teach me how to turn a single recorded voice into multiple voices that sound like a group singing together
by mixing or other techniques ? I don't have the luxury of a group singing together with me when I do recording. Advices would be much appreciated!

By far the most natural way to achieve this is for the singer to perform multiple takes - even if you've only one singer. At it's simplest, you could just double track the vocal part, although I prefer 3 parts - panned centre, left & right. Then repeat this process for each harmony, & mix accordingly.
Melodyne & some of the above methods do work on am single voice, but phase cancellation can be an issue if your not careful with each part's timing & panning. If you can only get a couple of decent takes from the singer, far better to perform any harmony/pitching techniques on the second take to avoid any phase issues. It's not uncommon for a singer to perform each vocal part 5-10 times, then comp (edit) the best takes so that you end up with 3 decent takes.
If you've only only one voice to work with Antares Harmony EFX is a useful alternative.
http://www.antarestech.com/products/harmony_efx.shtml

How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or

The situation:
I want to use basetext font, but some of the glyphs are missing in it, and are highlighted with pink boxes. common font [stix, etc.] have much more glyphs than basetext font. I can apply common font [stix, etc.]manually for each of the missing glyphs or insert two character and use kerning set it up, but it is tedious.
Question:
How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or insert two character and use kerning set it up?
Any one know how to do this?
Thanks in Advance,
~Jack

Try Peter kehrl's script
http://www.kahrel.plus.com/indesign/missing_glyphs.jsx

*** ~ can this do this: i want to make multiple circles within circles like the target logo ~ ***

im makign a simple visualisation. i want to dl a free trial of w/e i need and im done
a link to a guide on how to do this would be good
good links are good
also need good sites to ask questions liek these in the future, thanks
*** ~ can this do this: i want to make multiple circles within circles like the target logo ~ ***

*** ~ The Invisible Problem: Video As The Best Medium For Most Things ~ ***
Do you know how to learn? I don't think you do. Because we've all learned the same way. From school. The broken school system that we all know, and that some are reinventing.
Let's elaborate. When learning anything (that isn't invisible), we don't need to know awkward, confusing, and strange words. That do not mean anything, in and of itself.
~ Hard Words ~
What I mean by the invisible? Take 1+1. That's arithmetic, a branch of mathematics. That's invisible. We don't know what 1 is. What don't know what 1 means. It's just a line that goes up and down on the right wall in a cave of a caveman's drawing.
Until, of course, some inventive educators (not necessarily the traditional concept of "teachers") decides upon themselves, and say, "Hey let's show what 1 means. These 1st graders doesn't understand what 1 means. Here's 1 apple, and here's another apple. 1+1. We've shown it. Then we're golden.
That's what seems to be invisible, but is not. Is it? Of course the idea is invisible. 1 does not designate 1 apple. Clearly 1, as a concept/idea, is invisible. 1 is "1 of a unit". But a unit could be anything. How do you really define a unit? Not all units are physical objects. And if they aren't physical, you cannot show it, on a physical level.
So, that's a little bit about what I mean by the invisible.
~ Love, as invisible ~
You can show love to someone. You can hug them. But you can still show things, in a physical way, when the idea/thing, love, is still invisible. Love is an emotion. Emotions are invisible. You can draw it, and symbolise an emotion. But is never truly what the emotion IS. You can show something invisible by representation. As a concept, the idea is still invisible.
How do you explain things that are invisible to someone? Like love. Really? I've no idea. I'm sure someone far smarter and knowledgeable would though.
The emotion is in the neuroscience of our "mind". So until neuroscience, as a scholarly field, advances where they can show in the brain via an MR or whatever machine/device they use. Then they can show emotions. Or maybe they cannot, and emotions are more complicated than that. And they would need to explain how an emotion like love works via no more than mere words.
I'm sure there's a more academic word for the "the invisible", in this linguistic sense. Not sure what field of study, or more likely, what fields of study, this would be categorised under. Categorised wrongly, obviously, as that's how all categories/genres are.
But I'll run across it one day.
~ What I say again? ~
So what did I say again? When learning anything (that isn't invisible), we don't need to know awkward, confusing, and strange words. That do not mean anything, in and of itself.
So these words.
First of all, why do we need words? To communicate with one another. But I said we don't need words when talking about things that aren't invisible. You may ask, "Well then, how can we communicate with one another without words?"
Images. Moving images. Like video.
A little bit of words, when necessary, help though.
So let's rephrase. We don't need complicated words. That doesn't mean anything.
Nonverbal communication accounts for safely 90% of the message.
How poorly designed text, as a communication medium, really is. We need to understand that.
~ Origins Of Stuff & Histories ~
If it's so bad, why do we use words, on topics that video can do far better?
Like much of what is wrong with the world, they stem from the outdated past. During a time period where that was the best option, and the best invention, humanity could make -- for the times -- for the times, I repeat.
~ The Video Age ~
Today, we live in a video-dominated age. When did video first start? Recently when the Web became more developed? Of course not, they had films back then if you really think about it.
~ Teachers: People That Speak Words ~
So teachers are like a video, only worst due to less flexibility in what you can do (if they were a software, they lack of many features)
But better in the way that they can give immediate feedback. That two-way system that video (premade videos only) doesn't have. Live video is an example of videos that aren't premade. Combining video with a live person is another example. I'm sure there are more.
But teachers are basing their teaching on the textbook, and little to none from their own base of knowledge, and any of that base of knowledge would've been from textbooks anyway.
~ The Video Age ~
If video is really so good, we doesn't everyone use it??
You know what? They do. The proportionally few good ones that is. You haven't gotten around? Live in that caveman's cave?
~ Pixels ~
Pixels, that topic, is a great example of how clearly video is the best medium ever to show. We don't need representation of words to confuse and clutter the physical objects that these digital objects and button are.
Video is the best medium, at this current point in time, to teach/show anything related to pixels. This could be photoshop, or whatever.
~ Results ~
So we live in this world where we now have video. But so much of society is outdated. With outdated practises.
I hate words when we don't need them When there is better mediums to communicate 100x more effectively than words ever could.
You fail to see how significant 100x really is. How many orders of a magnitude is that anyway? I don't know. I don't know enough.
You also fail to see how much of what was said is about invisible, highly abstract, things/ideas. And some things aren't. So which ones were the things I could've shown far better in video, or maybe everything could've expressed better on video?
Video = moving images + still images like diagrams, slides with charts & infographics + sounds (like music, etc.) + maybe words +
~ Ends ~
Look, the point is that words are bad in so many ways. SO. MANY. WAYS. I shouldn't have to say it any more than once if you actually knew how to learn. I shouldn't have to say it -- at all -- if you knew at this moment how to learn. And you need to understand that. That words are bad in SO MANY WAYS. And to stop using them. Especially when you're trying to teach (or give answers, solutions, etc.)
Words are easier, sometimes, though. So that could be why I'm using it.
I'm not using complicated words though. And this was about complicated, strange, and meaningless words. So get that straight.
==
{1st Draft} -- out there in the vast Web.
None of these ideas in this is new. Visit the higher end of the Web for once.

Does Dreamweaver CC have Business Catalist accout like Muse?

Does Dreamweaver CC have Business Catalist account like Muse?

In DW CS6 or CC, go to Site > New Business Catalyst Site.
Nancy O.

My instagram won't like, comment, or follow

I have not to fully use my instagram in almost 2 weeks. the only thinf that I can do is upload a picture. My caption/ comment doesn't show up, nor can I like, comment, or follow. It has to be an iphone problem because I was able to get it functioning correctly via computer. I have deleted the app, redownloaded it, signed out, then back in. I have reset my phone, and reset all of my settings and it still has not worked, I have also updated it to the latest instagram, Can somebody helo me?

See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site

Hello, I'm wondering if any of you know whether or not there's an App that allows you to watch multiple video formats online (like online TV series, movies etc) Thank you so much

Hello, I'm wondering if any of you know whether or not there's an App that allows you to watch multiple video formats online (like online TV series, movies etc) Thank you so much

SgtChevelle wrote:
how do you decide which structures to use?
Trial and error.
I wish I had a better answer for you, but that pretty much encapsulates it. There is some, but not much, good wisdom out there, but it takes a significant amount of experience to be able to recognize it. The software development community if currently afflicted with a case of copy-and-paste-itis. And the prognosis is poor.
The solution is to be brutal to yourself and others. Focus on what you need and ignore everything else. Remember that other people have their own needs and methods and they might not be applicable to you. Apple, for example, can hire thousands of programmers, set them to coding for six months, pick the best results, and have the end-users spend their own time and monety to test it. If you don't have Apple's resources and power, think twice about adopting Apple's approach. And I am talking from a macro to a micro perspective. Apple's sample and boilerplate code is just junk. Don't assume you can't do better. You can.
Unfortunately, all this takes time and practice. You can read popular books, but never assume that anyone knows more than you do. Maybe they do and maybe they don't. It takes time to figure that out. Just do your best, ignore the naysayers, and doubt other people even more than you doubt yourself.

When i open Facebook i cannot like ,comment, read messages , or read notifications.

when i open Facebook i cannot like ,comment, read messages , or read notifications.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have multiple songs I would like to include in my slideshow. Can I change the rate of presentation for each song? For instance, upbeat song with a 2 secong presenation time and slower song with a 3 second presentation time?

I have multiple songs I would like to include in my slideshow. Can I change the rate of presentation for each song? For instance, upbeat song with a 2 secong presenation time and slower song with a 3 second presentation time

Alternatives to iPhoto's slideshow include:
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $99
Final Cut Pro X $299
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

Dreamweaver simpleviewer multiple galleries button links help

I am trying to do this:
http://www.airtightinteractive.com/simpleviewer/examples/multiple_galleries/gallery1/index .html
and here is another good example
http://www.designhousestudios.co.uk/sampleportfoliogallery/sampleportfolio.html
on my page here:
http://peachtree-designs.com/
This seems to be the code that pertains to the different slideshows (this is from the example webpage of how I want it to be):
<div id="header" >
<a href = "../gallery1/index.html">Gallery 1</a> | <a href = "../gallery2/index.html">Gallery 2</a>
</div>
<div id="flashcontent">SimpleViewer requires JavaScript and the Flash Player. <a href="http://www.macromedia.com/go/getflashplayer/">Get Flash.</a></div>
<script type="text/javascript">
The "Simple" Viewer slideshow gives instructions on how to simply embed and I have done that successfully, a link is here in case you want to check it out:
http://www.airtightinteractive.com/simpleviewer/examples/embedded/
I have this working fine but would like to embed several galleries. The instruction page of "simple"viewer says to create multiple galleries you just need to:
" ...To create multiple SimpleViewer galleries, make a copy of the whole SimpleViewer gallery folder for each gallery. Create your individual galleries as normal. You can now create a menu page that links to the index.html page in each sub-folder. Here is an example that contains a menu to navigate between 2 SimpleViewer galleries."
My confusion lies in what the heck a menu page is. I have ignored this all together and tried looking at the code from pages that give examples. especially the page that gives a download of html.
But I don't understand how to link the buttons in Dreamweaver to create different slideshows. I've put the four slideshow folders (print, illustration, logo, design) into my main HTML page. I assume the solution is to put the code mentioned above in for each slideshow/gallery .. reference each gallery by my folders names but then somehow make the DW buttons link to those folders.
I'll keep poking around at this and see if I can figure it out, but any input, advice or help would be SO very appreciated. If you would speak in laymans terms I'd appreciate it, I know flash well but am new to dreamweaver and not very good at codeing though I manage.
Thanks so much in advance, sorry this is so long winded.
sharon

I'm actually still having a problem with the individual galleries linking to the swf. Here's an explination and I'm attaching a snapshot of the file folder structure and the html's:
Thanks for responding :) I feel like I'm almost there, been struggling with this for a week.
my site is here:
http://peachtree-designs.com/web.html
I am going with a different approach, instead of trying to link the graphics from within each gallery folder I am instead placing each gallery html outside the individual gallery folders in my root folder ... then trying to link the main html page to each html gallery file, and have each gallery file link/see the swf galleries within the folders.
I have made separate gallery folders for each gallery, print, logo ect is in it's separate folder in the root folder of my website.
In the main root folder I have the index.html *plus* I've put each galleries html file *outside* it's folder but directly in the root folder, so the main html webpage file can link (with the buttons) to each gallery html in the root folder.
Problem is getting the galleries html's to connect/link to the swf gallery in each gallery folder (within the root folder) (I'd put the html's directly in it's gallery folder but then the graphics links break). "gallery not found" is what I get and I'm not sure how to do this. In the code of each gallery html is this:
<td valign="top"><script type="text/javascript">
var fo = new SWFObject("illustrations/viewer.swf", "viewer", "500", "500", "8", "#c5bdb2");
fo.write("flashcontent");
</script></td>
so the gallery html's in the root folder *should* be directed to each swf in it's gallery folder: illustrations/viewer.swf .. print/viewer.swf ... etc ... but it's not working.
I'm going to try to just attach my whole site in case someone can take a look and tell me what's wrong. It's large but I'm desperate and it's hard to explain.

I would like to open a Firefox browser with multiple tabs per topic, like work1/work2/hobby and see that given name in the taskbar, instead of the tab-name

I usually open a new browser window per subject, let's say I'm shopping online for something and open about 5 tabs for that, but in the same time I am working on 2 systems which are lookalike, but defenitely should not be mixed average 6 tabs open per subject. Also I read something on my hobby and I open another window and want to read a few tabs on that.
I don't want them to mix and preferably I'd like to see a self-chosen subject for a minimized window in the taskbar.
Is there a feature like this or is it possible to add a feature like this?

Another alternative by the way maybe to use multiple Firefox profiles. I will give more information on that if required. It is fairly easy if you are used to using computers but not something this forum officially supports with KB articles.
The bult in Tabs groups sounds more like what you want. Did you try that ?
As for trying to interest Developers. You could make a comment using ''feedback'' but I would not hold out much hope unless you yourself know a developer willing to undertake the coding and press for its use. Maybe you would be more likely to interest and get something from add-on developers, assuming a similar add-on does not already exist.
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers.
If you want to leave feedback for Firefox developers, you can go to the Firefox ''Help'' menu and select ''Submit Feedback...'' or use [https://input.mozilla.org/feedback this link]. (You'll need to be on the latest version of Firefox to submit feedback). Your feedback gets collected at http://input.mozilla.org/, where a team of people read it and gather data about the most common issues.

Set multiple items with javascript function in chart link

Hi Folks
I am able to use the javascript $s function to set the value of one item from a chart link. I need to pass values to multiple items.
Is there a way to use javascript function to pass values for multiple items on a page from a chart link
Appreciate your responses
Thanks
Gopal

Hi Arnau,
You need to surround your JavaScript code like this (without the spaces before and after script):
< script language="Javascript">
window.open("<%=ABAP_VARIABLE%>").focus();
</script >
Regards,
Patrick.

Dreamweaver treats multiple divisions in JavaScript like comments.

Similar Messages

Maybe you are looking for