Drill-Down from several Charts to Same Target

Hi,
we have built a dashboard with 3 (soon to be 6) column charts and one line chart below. The colum charts represent 6 KPIs aggregated for a year for different warehouses. Each warehouse is a specific series (because we want them to have a individual colors). When the user clicks on a warehouse in one of the column charts, we want the line chart above to show the
For this purpose, we have all column charts store drill-down values to the same two cells:
- One cell stores the series name (warehouse selected)
- One cell stores the name of the clicked line chart (we use a single cell with the chart name as source for the first series of each chart. After the first series is selected as the default drill-down, this source and destination seems to be used for every series selected, which might be a bug)
Our problem is, all queries for the charts are loaded at startup. The default drill-downs for all charts are done, and we have a random chart in the drill-down destination. If the user clicks the same chart again, we do not notice this as the value of our target cell does not change. We have tried several solutions for this, but nothing is really satisfactory.
Does any of you have an idea, or a similar dashboard maybe, where the drill-down of several charts (preferably with several series per chart) is stored into a single target chart?
Thanks & Regards,
Sebastian

Hi Sebastian,
You cannot have drill downs from different charts to the same target.
As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
Here again the user has to select the same warehouse in all the three column charts else it wont work.
Hope this was useful =]
Thanks & Regards
Arjun.C.T

Similar Messages

Drilling down from OmniPortlet chart to detailed chart in same OmniPortlet?

I am trying to use OmniPortlets to create a dashboard of charts showing different metrics.
I want to be able to drill into each chart to get a more detailed chart in the SAME OmniPortlet frame with all the other charts being unchanged. So if I have 3 OmniPortlet charts C1, C2, C3 in the same page, I want to be able to click on C1 and to be able to drill into C1 (details), C2 and C3.
I am trying to do this through OmniPortlet events, parameters and page parameters.
1) I've defined a OmniPortlet Param1 to parameterize the source of data - So my source URL is http://<URL-base>/##Param1##
2) I then defined a Page Parameter PP1 that is associated with Param1 and set a default value for this (to make sure ##Param1## gets set for the top level chart). I set this default value in the OmniPortlet Parameters page - (otherwise, the ##Param1## seems to map to a null sting despite the Page Parameter PP1's default value)
3) Finally, I defined an OmniPortlet event that gets fired when I click on the chart. The Event sets as one of its parameters, the data source that has the drilldown data. This column name is PP1.
So, the chart should first display with the data source URL being initialized from the Page Parameter. When I click on the chart, the Event should set up a new parameterized value in the data source so that next chart with drill down data is shown after a page refresh.
The reality is different from this theory. When I click on the chart, for some reason, the value of Param1 for refreshed Omniportlet display seems to be getting blanked out. So my chart definition gets messed up since the data source is now invalid. The page however continues displaying the original (pre-drill) chart from the cache.
2)
I don't know whether this problem is because of an improper use of the Page Parameters and OmniPortlet events or whether this is because I seem to be forced to set Param1's default value (maybe this is overriding my data source URL even in the drill down chart).
There seem to be some examples of the chart click causing another chart to refresh. These docs don't have a lot of detail, plus I want the SAME OmniPortlet to show the drill down chart.
Has anybody done this? Any pointers would be appreciated..

Hi Sebastian,
You cannot have drill downs from different charts to the same target.
As per your scenario you have 3 column charts with warehouses displaying their respective 3 KPI's values. I believe you would have created a series each for available warehouses. If you have selected drill down on load for all the column charts with one single target then at load all the three column charts will try to place the destination of their selected series(based on warehouse selected) to the same target.
And also as you mentioned when the user tries to select the same chart again the target doesn't change, the reason is the same as all the charts are trying to put the destination of the series in the same cell.
Instead of doing it this way, what you could do is to name the series of all column charts the same and have the series name put into one cell. Then based on this series name you can lookup the data for that warehouse and display it in the line chart.
Here again the user has to select the same warehouse in all the three column charts else it wont work.
Hope this was useful =]
Thanks & Regards
Arjun.C.T

Drill down from the charts of VC

Dear gurus,
   can I realize the functionality of drilling down from the charts of VC?
   For example, I have a bar chart. Can I drill down from each bar of chart to detailed infomation about that bar?
   Please advise. I'll assign points if helpful. Thanks in advance.
Jin Ming

Hi
I hope you will get answer from this solved using pop up window for drill down
Thanks & Regards
Harsimran

Drill down from Pie Chart

Why does the Insert Chart sometimes not give you a drill down capability from the Pie chart

Hi,
Its is possible and please have a look in the below link and it got detail steps
http://www.xcelsiusjournal.com/index.php?option=com_content&task=view&id=67&Itemid=2
Thanks

Drill Down From Combo -- Chart -- Chart

I Have a Combo box with Company and when I select Company it should display me the Pending count by ecah month in a chart..
Till now I achieved..But after that can I drill down further to see Pending Status,Size ,age!!
Please suggest!!
Thank you,

I arranged my chart.. I used the filter component and I am getting the policy count for each month according to distribution channel and Company!!
Channel---->Company>Jan-->Feb--->     Mar
     IMO-->     AIL>     100->     40--->     70
     IMO-->     AML-->     200->     500--->     80
The secound chart should display following
Channel-->     Company->     Case Size>     Jan->Feb>Mar
     IMO----->AIL->     0-10k>20-->30>30
     IMO-->AIL->     11k -50 k>     80--->10>70
     IMO----->AML-->     0-10k--->     50->100-->40
     IMO----->AML-->     11k -50 k>150->400->40
================================================
If I click Policy count of IMO,AIL in January which is 100 it should give following information in drill down
Casesize-->Jan
0-10k------> 20
11k-50K--->80
==============================
Please let me know How will I map it!!

Error Message appears when drilling down from a report.

Hi,
I am using CR XI R2.
I have an rpt file that displays a chart from a sub report.
I tested it on the CR designer and report viewer - works ok.
When I display this report in my .Net application, I get an error message when drilling down from this chart : "The Report Application Server failed"
When looking at the log files I see this error message:
4 19 13:11:14.770 5336 5564 (\servers\ras\dtsagent\reporthandler.cpp:11622): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11618 ErrorCode:997 ErrorMsg:"" DetailedErrorMsg:""
This is a Viewer error - but when drilling down from the Report Viewer I don't get this exception.
Does anyone know what this mean?

Too strange and my require a phone support case;
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Three ideas:
1) Install CR designer on one of the boxes where this does not work and try to run the report there
2) Add a line to your code and save out the report just after your database logon once ( .saveAs). try to run this report in the CR designer.
3) Use the [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility to compare the runtime - both CR and db client between computers that work and those that do not.
Ludek

Drill down on bubble chart

Hi all,
I am having a bubble column chart. when drill down the bubble chart. one more chart will display. is it possible to open the drill down chart in new window?
& how can I drill down on bubble chart
similar to this report
http://www.recovery.gov/?q=content/investments
Thanks

Priya,
You need to use drill down option in Bubble chart and dynamically display Chart placing it in a Panel container. It is similar to this http://xcelsiusandme.blogspot.com/2009/07/xm-sample-2-pop-up-with-url-button.html
Instead of Report 1 button...have drill down from bubble chart.
-Anil

Drill down in several blocks at the same time

Hi all!
I have two charts. Both are based on same drillable dimension, with different measures.
Is there any way to drill down on both charts (or tables) by clicking in only one of them? It is, when I click on a dim in chart1, chart1 and chart2 drill down by the dim value clicked on chart1. I hope I made myself clear...
For the record, I checked "Synchronize drill on report blocks" under WebIntelligence user preferences, but still doesn't work.
Any ideas, thanks so much!

Hi Sergi,
The "Syncronize Drill" option should cause this to work. Are you sure they are the same dimension on the same report tab? And are they coming from the same query?
Thanks

Drill Down from Chart View

Hi,
I have a Pivot table with Chart view only, I want to drill down from the legend and from teh graph itself, is it possible? If so please let me know the steps involved.
Thank you very much.

UPDATE POST
@SSk
can you try this never i tried,the legend that is coming is a column from your request right?...go to column properties in that you find a option called navigate there you place the navigate report and see if the legend is showing a link below it to navigate
follow this topic navigate value interaction of a column http://gerardnico.com/wiki/dat/obiee/olapoperation_
if it works i would be happy,but never i tried......please try this and tell me did you get or not???
Cheers,
KK
Edited by: Kranthi on Jan 20, 2011 7:14 AM

Drill down from the financial reports

When generating a P&L or Balance sheet, it is not possible to view what transaction the amount is made of. you have to either generate a general ledger report or have to chart of account window open at the same time. Simple programs like quickbooks have the functionality to do drill down from any report. we have multiple customers for whom this situation is very aggravating.
We hope you can find a solution or make this part of a new release.
Thank you
Sophie St-pierre

Hi
I hope you will get answer from this solved using pop up window for drill down
Thanks & Regards
Harsimran

How to configur Drill down on Bubble Chart

Hi,
Can anyone please hel me with examples - how to confihure drill down on bubble chart.
that means,
1) whenever the user clicking the bubbles - the pop up window should display some notes related to that bubble
and also in another requirement
2) whenever the user click the bubble - the pie chart should display the values related to that bubble.
please help me on achieving the same..

If the Bubble size is constant we can do this.But as you know Bubble sizes varies from once to one place..It will be tough scenario if you want to do it here..Instead take a label based menu and try to use dynamic visiblity .And show labels in there which contains the text for the respective labels..

DRILL DOWN FROM GL INTO AP, AR, PO & INV SUBLEDGERS FROM ORACLE DISCOVERER

Hi,
One of the key functionality , We are looking for ability to query / Drill down from GL into AP, AR, PO & Inv Subledgers from Oracle Discoverer in the Oracle Applications. We are trying to create workbook that will allow users to see summary of GL Balances, then the ability to retrieve transaction details from subledgers via GL. It looks like this is not possible using seeded folders from seeded business area in the applications EUL. It looks like we need to create custom folders to get these sort of reports.
Can this be done using seeded EUL? If yes, Can you please let me know the process and steps involved.
Incase of custom folders, Could you please let me know what are the main tables/views involved for retrieving transactional detail from subledgers like AP, AR, PO & INv via a GL query and relations from the custom folders to Journal Entries and Journal Lines folders.
I highly appreciate your advice on this subject. if anyone has Business Areas and worksheets already constructed that they could send me this would be most welcomed.
Thanks in advance for all your help.
Regards,
Venkanna

Hi
With my little knowledge in Discoverer, I feel this is highly cumbersome process from the EUL to create drilldown to Subledgers using Discoverer 4i.You may have to create and Link several tables and views to get the same.
The Standard drilldown functionality in Oracle works with GL_SL_LINK_ID and Reference columns populated in GL_JE_HEADERS and GL_JE LINES to link the GL Journals to Supplier Payment, Invoice, Inventory Receipt to PO and similarly for other modules.
Hope this helps
Regards
Sivakumar

Drill down from a line graph? Make the entire graph click-able?

Guys, i can drill down from other types of charts except a line chart.
Is there anything that is special about the line chart?
Also, can i make the entire graph click-able? So, instead of clicking on a bar to trigger a linked report, can the whole chart be a link basically?
Thanks for your help

There is not special with the line graph..... Just click on the data symbol to drill or navigate. These settings can be found under the "additional Charting Option" button.
regards
John
http://www.obiee101.blogspot.com/

Can we drill down from one application to other in design studio 1.2

Hi All,
Can we drill down from one application to another application in design studio 1.2?
I have a requirement where in on clicking one should drill down to a detail level information shown in a different application.
Regards,
Tanisha

A quick suggestion would be to look at OpenDoc - see this thread Passing Parameters with OpenDocument in SAP Des... | SCN

Drill Down in Pie Chart not working in IE8 / Mozilla 5

Hi Experts,
In my dashboards, drill down feature in Pie charts are not working if the flash is viewed in IE8 / Mozilla Firefox 5.
In IE7 it is working. Is there any browser settings required for this ? Pls suggest.
Drill down in column chart is working fine.
Xcelsius Version: Xcelsius 2008 SP3 FP 3.5
Browser Version: Firefox 5.0 / IE 8
Many thanks,
PASG

Hi,
You may want to download Xcelsius 2008 with SP4.
SP4 will support the newer IE 8 (32 bits) for Xcelsius related issue.
As for FireFox 5 that came out last week, this won't be supported anytime soon.
Regards,
Ken
Edited by: Ken Low on Jun 27, 2011 8:50 AM

Drill-Down from several Charts to Same Target

Similar Messages

Maybe you are looking for