Drill through to another report with bins in OBIEE 11g

Hi Everyone,
We have a specific scenario that is as follows:
Bar chart with 3 bars: '0-30', '31-60' and 'other'
these bars repsent the number of people who are in that age bucket.
This was accomplished by taking the peron's Age (a dimension with an age column) and using the 'bin' option in obiee 11g answers.
When the user clicks on one of the bins in the bar chart (e.g. 0-30), it should navigate to another report which contains details (a table) of ONLY the people who are in that age bucket.
In order do this I created the same 'age bucket' in the drilll through report and set the field as prompted.
This works in OBIEE 10g but in OBIEE 11g when I click the 'bin' (e.g. 0-30) on the top report, it navigates to the other report via action link and displays ALL of the people, not just the people in the bucket 0-30.
Can anyone advise?
P.s. if I remove the bin for the age bucket, and display the actual age, the drill down works fine. I think the issue is specific to the bin feature. I am using OBIEE 11.1.1.6.4

Just confirmed with Oracle this is bug 13996544 . FYI just incase it helps anyone

Similar Messages

  • When drill through from FR report, navigate to FDM landing page.

    Hi,
    Data loaded in HFM 11.1.2.1 using FDM 11.1.2.1 and it has been replaced by ERP integrator 11.1.2.1.501. When we perform drill through from Financial reporting report it is navigating to the FDM landing page instead of ERP integrator landing page. In FDM landing page, showing the ERROR:
    "Error: Error Retrieving recordset"
    Anyone please help me to solve this issue.
    Thanks,
    Yamuna

    Hi ,
    My guess is that , when you loaded the data from ERPi the drill regions created by FDM have been over written. Hence you are not able to drill down to the FDM page. This happens in most of the scenarios , where if the data is loaded across an intersection using FDM and then again the data is loaded in the same intersection using some other way like Flat Files or ERPi the Drill Regions or Drill POVs get compromised.
    To confirm whether your FDM drill back is working or not , create a simple form using any of the intersections from your dimensionS ( not the same ones used above ) and load a single line of data using FDM across those intersections in the form. Try drilling back to the FDM Landing Page and check. Same way , create a report for the same intersections and check drill back to FDM. Remember to check the :Drill - Through" check box in the property grid in the Grid Properties for that report.
    Regards

  • Drill down to a report with a select view

    I have a report with a select view on a column... In this column I have coded a navigation to another report that has some details and also has a select view on the same column.
    a) The only way to make this work is in the construction, using the view edit screen, the select view, select the option, save it... and then in the criteria, code the navigation.
    This had to be done to every option.
    b) Since the target report has also a select, whenever you navigate from the original report, the detail report is displayed "as it were", in respect to the select column... The target report is filtered by this column (I am using "is prompted") It would be nice if besides the filtering the select could show the select that comes from the original report... It is not working like this... The user has to select again (column selector) to see it like the original one...
    Sorry, it is a bit confusing...but I´d appreciate any help.
    Txs.Antonio

    I dont think about drill down, but try with navigation using common columns. in this way we can have both side navigations summary-> detail and detail->summary.

  • Drill down to another report

    Status     Model     Count
    A     Printer          5
         Desktop          7
         CPU          18
    I     Printer          12
         Desktop          34
         CPU          66when i click/drill to Status Level i need to open another report and similarly for model.
    ie the drill will display all the data rather than particular item count.
    how we have to achieve this in OracleBI Discoverer 10g (10.1.2.1)

    Hi,
    You need to use drill to detail to do this, see http://download.oracle.com/docs/html/B13915_04/drilling.htm#sthref518
    Rod West

  • How to Drill Through from Hyperion Reporting to Oracle - GL by using FDM?

    HI
    I am new to FDM.
    I already Installed and Configured FDM.
    I need to provide Drill through functionality on Hyperion Planning Workspace (Hyperion Reports built using Hyperion Financial Reporting Studio and Data Forms) to Oracle Financials(GL) by using FDM.
    I think 1st i need to develop Application in FDM Workbench to Push data from Oracle Financials to Hyperion Essbase.
    than i need to enable "Drill" on Hyperion Finaical Reports.
    Can you please share link , guide or any thing.
    Its urgent please.
    thanks
    Sher
    Edited by: Sher Ullah Baig on Sep 13, 2012 3:22 PM

    Thanks
    But when i try to log in i m getting error bellow"
    Failure of server APACHE bridge: No backend server available for connection: timed out after 10 seconds or idempotent set to OFF."
    So do u have any other reference plz
    thanks

  • Use a delivers agent on a report with "Is Prompted" column, 11g

    Hi all,
    I have a report with is prompted filter on a column. And the report are working fine.
    But now the customer have asked me to set up a deliver agent on the report. And when the agent is running the report it is not working.
    The column that is set to "is prompted" has a expression in business layer and in that expression we are using a session variable. If I changes "is prompted" to a static filter or no filter the agent works fine. I'm getting this error when the agent tries to run the report:
    [nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLExecDirectW).
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
    [nQSError: 43113] Message returned from OBIS.
    [nQSError: 23006] The session variable, NQ_SESSION.access_voc, has no value definition. (HY000)
    SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Espor voc fields"."Field name" FROM "Esporingdata"')}
    SQL Issued: SELECT "Espor voc fields"."Field name" FROM "Esporingdata"
    Error Codes: AGEGTYVF
    AgentID: /users/weblogic/Linus_test_agent
    ...Trying main Agent loop again.... Sleeping for 6 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLExecDirectW).
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
    [nQSError: 43113] Message returned from OBIS.
    [nQSError: 23006] The session variable, NQ_SESSION.access_voc, has no value definition. (HY000)
    SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Espor voc fields"."Field name" FROM "Esporingdata"')}
    SQL Issued: SELECT "Espor voc fields"."Field name" FROM "Esporingdata"
    Error Codes: AGEGTYVF
    AgentID: /users/weblogic/Linus_test_agent
    ...Trying main Agent loop again.... Sleeping for 8 seconds.[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Odbc driver returned an error (SQLExecDirectW).
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
    [nQSError: 43113] Message returned from OBIS.
    [nQSError: 23006] The session variable, NQ_SESSION.access_voc, has no value definition. (HY000)
    SQL Issued: {call NQSGetQueryColumnInfo('SELECT "Espor voc fields"."Field name" FROM "Esporingdata"')}
    SQL Issued: SELECT "Espor voc fields"."Field name" FROM "Esporingdata"
    Any Help Much Appreciated
    Linus

    Hi Linus,
    Where you able to solve this issue or do you have additional findings to your issue? I'm facing a similar problem: a session variable has no value defined when running from the agent.
    Please let me know,
    Thanks,
    Santiago

  • Need help with opatch for OBIEE 11g

    I'm running into some more of Oracle's typical gibberish and poorly written documentation, and need some help patching OBIEE 11g.
    I'm TRYING to follow the instructions here:
    https://updates.oracle.com/Orion/Services/download?type=readme&aru=13160647
    So, let's see. How about step 2:
    For FMW Opatch usage, please refer the doc at :
    http://www.oracle.com/technology/software/products/ias/files/fmw_opatch.htm
    Well, that IP address automatically redirects to the general download page:
    http://www.oracle.com/technetwork/indexes/downloads/index.html
    Nice.
    So, let's try this doc:
    http://docs.tpu.ru/docs/oracle/en/owl/E14571_01/doc.1111/e16793/opatch.htm#CBHDEGBJ
    Section 2.3.2, "Patching a Fusion Middleware Product"
    Quoting: "Once you obtain the patch, determine the Oracle home directory to which you are going to apply the patch....If you do not know the name of your Oracle home, you should run the opatch lshomes command as described in Section 2.4.6, "Listing the Applicable Oracle Homes for a Patch" to obtain a list of Oracle homes that pertain to the domain."
    So let's see, I've got two OPATCH.BAT files, one in c:\mw_home1\Oracle_BI1=OPatch\, and the other in c:\mw_home1\oracle_common\OPatch\.
    I open a command window, CD to one of those paths, and run opatch lshomes. I get this error:
    "The Oracle Home C:\mw_home1 is not OUI based home. Please give proper Oracle Home. OPatch returns with error code = 1. OPatch failed with error code = 1"
    Same results for the other opatch.bat in the other directory.
    Besides the atrocious grammar, this error message is not helpful in the least. I'm trying to patch OBIEE 11g, which is installed in c:\mw_home1. What else is opatch wanting?

    Yes, the error message is misleading. It should say something like "Environment variable ORALCE_HOME has not been set or set incorrectly".
    Here is how I solved the problem on a Windows Oracle Fusion Middleware SOA installation. The SOA installation already comes with OPatch installed. In my case it is located in D:\Oracle\Middleware\Oracle_SOA1\OPatch. On a command prompt, I set the environment variable ORACLE_HOME like this
    set ORACLE_HOME=D:\Oracle\Middleware\Oracle_SOA1
    and the CLASSPATH variable like this
    set classpath=
    The latter prevents opatch from loading classes it does not need and throwing java.lang.ClassNotFoundException. Also notice ORACLE_HOME does not point to D:\Oracle\Middleware but D:\Oracle\Middleware\Oracle_SOA1. I made a mistake by setting ORACLE_HOME to D:\Oracle\Middleware kept getting:
    "Recommended actions: Please make sure no other OPatch or OUI processes is running. Try to run $ORACLE_HOME/oui/bin/runInstsaller.
    OPatch failed with error code = 20"
    I wasted a lot of time trying to figure out what went wrong.

  • CC&B Integeration with BI Publisher(OBIEE 11g)

    Hello Friends,
    we are using BI Publisher coming with OBIEE 11g, But in ccb installation document consist support for bi publisher 10g , can any one pls explain how we can configure CC&B with BI publisher coming with OBIEE 11g.Any documentation available online pls share.
    thanks and regards
    sivaram

    Refer to Doc. ID: 1299732.1 for BI Publisher Guidelines for OUAF.

  • Cant Use Page Controls to Cycle Through Records in Report with Table

    Hi
    I have built a tabular report in answers that returns a 1000 rows. I have set the number of rows to be displayed to 100. However, when I run the report i cant use the page controls to cycle to the next 100 records.
    When I edit the table with the compound layout view I can cycle through the records fine, but when I save it and run normally I cant use the page controls.
    Page controls works on other reports in the subject area but these are pivot tables not normal tables.
    Can someone help diagnose the issue?
    I'm using OBIEE 10g btw
    Thanks
    James

    Hi,
    If you have set DefaultRowsDisplayed as 100 in instaceconfig.xml file, then this would effect only the table view, not Pivot table. By default, Pivot would display all the records without pagination.
    Thanks

  • Drill Through - Object variable or With block variable not set.

    Hi
    I've set up all the relevant drillkeys, the table and the query but I'm getting a "Object variable or With block variable not set." in the browser page when it comes up
    The title looks fine in the page and takes on the correct description....help!
    Thanks very much in advance

    Hi,
    This frequently happens in a multi-server environment. It is a result of the encryption key between the two servers becoming corrupt.
    Go to Server manager on the app box.
    Delete the encryption key. (backup first if you like)
    Re-create the encryption key
    Register msolap90.dll on both servers
    I don't have the text for this handy. I think it's: regsvr32 "C:\xxx\xxx\xxxx\xxx\msolap90.dll"
    Note: you must use the quotes!
    Reboot the DB box
    Reboot the App box
    Hope this helps. Kindly award points if helpful.

  • Create PDF report with APEX and Oracle 11g doesn't work

    Hi everyone,
    I have a problem with the downloading of PDF reports from APEX with Oracle 11g.
    When I try to download a PDF, Acrobat Reader says it can not open the file.
    I have done the same test in an environment with APEX and Oracle 10g and it works perfectly.
    Does anyone know if there is a known bug for version 11g.
    Thank you very much.

    Hi Munky,
    I open the generated file the Notepad++ I can read the next message:
    *<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1>OracleJSP:*
    An error occurred. Consult your application/system administrator for support. Programmers should consider setting the init-param <code>debug_mode</code> to "true" to see the complete exception message.</BODY></HTML>
    I have not idea can I solve the problem.
    Have you got any solution for this problem??
    Thank you so much.
    Victor Muñoz.

  • Report format issue  in obiee 11g  send  through Agent

    Hi,
    I have scheduled the agent to send the report to IBM Lotus notes. I need to send the report to users in text format and not an attachement.
    The report not comming as it is,the column width is getting srinked.I noticed CSS not applying in Lotus notes.
    How can i apply css to lotus notes. can anyone please suggest..
    Regards,
    944656

    Try by setting view properties like Table or Pivot table if this is not working then attach the report to a page and set the section properties and see how it works.
    If this is not working then Notes might have trimming it ;)
    If helps pls mark

  • Issue with Writeback in OBIEE 11g

    Hello,
    I have a created writeback report and it is working fine as of now .Now I changed the writeback template to use stored procedure to update the data.When I am trying to update integer columns it is working fine but when I try to update varchar columns it is giving the error instantly without generating the log.
    "An error occurred while writing to the server. Please check to make sure you have entered appropriate values. If the problem persists, contact your system administrator."
    When I try to update the procedure in DB ,it is working as expected. Can anyone tell me what is way I can troubleshoot the issue?
    Thanks,
    Prasanna

    Hi Prasanna,
    Can you try paasing the varchar values with single quote.
    Regards
    Raj

  • Report Links issue in obiee 11g

    hi all,
    we are using obiee 11.1.1.5 version. we are facing issue with report links. when there is no data in the dashboard, the dashboard is displaying only Refresh button, it is not displaying Export and Print(even though we customized the report links to display Refresh, Export, Print). when there is data in the dashboard it is displaying Refresh, Export and Print as expected. Is this product limitation or a bug in obiee.

    You need to repost this in the OBI-EE forum.

  • Unable to get the report query logs in OBIEE 11g.

    While trying to view the report queries in 11g(Administration >Manage Sessions >Log(of a particular request))
    , I'm getting the following error :
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <2799894530>: Syntax error [nQSError: 26012] . (HY000)
    Has nayone come across the same. Please do share , how to fix this.
    Thank you.

    Hi,
    Even Im facing the same issue.. Reports are working fine... For testing, I opened Analysis page and created a query with 2 columns.. Results are coming but log is not appearing.. The issue is still the same...
    Any help will be appreciated...
    thanks & regards,
    dmaze

Maybe you are looking for

  • How to write an inverse routine for an info object at field level.

    Hi All, Our requirement is as follows: Need to populate 0MAT_PLANT in a virtual provider. But during query performance it is like - If someone were to add a filter to the BW query on 0MAT_PLANT, it would take the system awhile to search the APO datab

  • Changes after transport are not reflecting in QA and Production

    Hi All, We changed two table settings in developemnt system  table names are ALMBCADM & ALMBCDATA. We modified the table technical settings as "buffering allowed but de-activated". After we transported the change requested in QA Prod enviornment ,the

  • Applying rman backuppieces to stanby database

    Hello, I have an standby database 10g, which is feeded by archive logs sent from primary. A lot of archive logs were missed for ever, so standby needs to be recovered. For that, I applied rman incremental backups. Those rman backuppieces were generat

  • Provide Tooltip to a table control field

    Hi there, can anyone suggest me how do I provide tooltip to a field in a table control created thru screen painter? the field is of char4 type and it displays an ICON depending upon the business logic. Regards, Deb.

  • Http Scenario. Pls advice very urgent

    Hi All, My Scenario is a. HTTP sends data to XI Synchronously. b. XI opens Socket Connection in User Defined Function (UDF)     of Message Mapping and gets response back from Socket     in UDF. For Socket Connection request and response I will     wr