Drillthrough report error for AssignedTo parameter

Hello,
I have created PieChart which is generating drillthrough report based on parameter from selected value on PieChart. I am passing two parameters,
Microsoft_VSTS_Common_Severity and System_AssignedTo. I have given "All" as default to both parameters.
Drilldown report works fine with selected value for "Microsoft_VSTS_Common_Severity" and default (All) for
System_AssignedTo but gives an error if I pass any selected value for "System_AssignedTo" parameter.
The error says: "An error occurred during local report processing. Query execution failed for dataset 'datasetName'. Parser: The syntax for 'LastName' is incorrect."
It seems that parameter expects ID as well, something like this: "[Work Item].[System_AssignedTo].&[S-1-5-21-284166382-85745802-1543857936-25120]". How to get this ID for selected user from PieChart?
Any help to resolve this problem?
Thanks.

Hi Maddie,
I have checked your report files, and I found that the @WorkItemSystemAssignedTo
parameter in the RiskDrillThroughTable.rdl is set with a default value which is from
dsSid dataset. And the dsSid dataset is defined with the following query:
SELECT SID
FROM DimPerson
WHERE (Name = @EmployeeName)
So in your report you see that value of the @WorkItemSystemAssignedTo
parameter is SID.
If you don't want to show SID in the @WorkItemSystemAssignedTo
parameter, you need to change the default value of it. (change the query of the
dsSid dataset)
And for your question: How to get this ID for selected user from PieChart? With current settings in your report, I can use the drillthrough report correctly, the
@WorkItemSystemAssignedTo is automatically filled selected user's SID. So I think you should already achieved your requirement.
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Crystal Report Prompt For Enter Parameter Values

Hi,
I did a report with 2 subreports embeded in VS2005 using VB and it worked fine but when I ported the whole application to VS2008 the above problem occurs. Here are some codes:
    Private Sub btnPreview_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnPreview.Click
        Dim viewer As New frmReportPreview
        Dim rpt As New ReportDocument
        Try
            rpt.Load("C:\Report\crptMain.rpt")
            rpt.SetParameterValue("Code", Me.cbxCode.Text)
            rpt.SetParameterValue("Code", Me.cbxCode.Text, "crptSubReport1.rpt")
            rpt.SetParameterValue("Code", Me.cbxCode.Text, "crptSubReport2.rpt")
            viewer.report = rpt
            viewer.WindowState = FormWindowState.Maximized
            viewer.ShowDialog()
        Catch crptEx As CrystalDecisions.CrystalReports.Engine.EngineException
            MessageBox.Show(crptEx.Message, "Crystal Report Errors...")
        Catch ex As Exception
            MessageBox.Show(ex.Message, "Crystal Report Errors...")
        End Try
    End Sub
Private Sub frmReportPreview_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
        Dim rpt As New CrystalDecisions.CrystalReports.Engine.ReportDocument
        Try
            Me.CrystalReportViewer.ReportSource = m_report
            Me.CrystalReportViewer.RefreshReport()
        Catch ex As Exception
            MessageBox.Show(ex.Message, "Error...")
        End Try
    End Sub

Subreport Parameters are contained within the Main Report's ParameterFieldDefinitions collection. Passing Subreport Parameter values directly to the Subreport will result in the values not being applied and the user being prompted at runtime to provide new values.
Ludek

Bursting report error for BI Publisher

hi all,
Following is the error i am getting while bursting a report through the BI Publisher Console Scheduler.
Please help.
oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerException
     at oracle.apps.xdo.servlet.scheduler.toplink.ToplinkDataHandler.insertJob(ToplinkDataHandler.java:830)
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1896)
     at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:293)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:94)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at oracle.apps.xdo.servlet.scheduler.toplink.ToplinkDataHandler.insertJob(ToplinkDataHandler.java:821)
     ... 16 more
Thanks..

When we've had toplink errors, we've assumed there's been a disconnect between our scheduler database and BiPublisher.
Stopping BiPublisher and restarting the app clears these errors for us.

Crystal report Error for CRVS2010 sp2 using Push Method

I am trying to pass a dataset to a crystal report viewer using SetDatabaseSource.
I have defined in Crystal to used an ADO .Net Database XML Schema.
I pass a Dataset to the Report By using SetDatbaseSourece and set the ReportSource for the CrystalViewer but I get the error that crdb_adoplus.dll does not exists.
Note that Crystal is looking for crdb_adoplus.dll under subdirectory dotnet1. It resides under win32_x86.
Is this a Crystal Report Problem ?
Is their any docuentation that show how to program for ADO xml dataset using crvs2010 ?
The Error Reads
System.IO.FileNotFoundException was unhandled
Message=Could not load file or assembly 'file:///C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. The system cannot find the file specified.
Source=mscorlib
FileName=file:///C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
FusionLog==== Pre-bind state information ===
LOG: User = WKST04\GARYB
LOG: Where-ref bind. Location = C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll
LOG: Appbase = file:///D:/S_and_G/LMS_DotNet/LMS_Solution/LMS/bin/Debug/
LOG: Initial PrivatePath = NULL
Calling assembly : (Unknown).
===
LOG: This bind starts in LoadFrom load context.
WRN: Native image will not be probed in LoadFrom context. Native image will only be probed in default load context, like with Assembly.Load().
LOG: Using application configuration file: D:\S_and_G\LMS_DotNet\LMS_Solution\LMS\bin\Debug\LMS.vshost.exe.Config
LOG: Using host configuration file:
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework\v4.0.30319\config\machine.config.
LOG: Attempting download of new URL file:///C:/Program Files (x86)/SAP BusinessObjects/Crystal Reports for .NET Framework 4.0/Common/SAP BusinessObjects Enterprise XI 4.0/win32_x86/dotnet1/crdb_adoplus.dll.
StackTrace:
       at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks)
       at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark)
       at System.Reflection.Assembly.LoadFrom(String assemblyFile)
       at CrystalDecisions.ReportAppServer.DataSetConversion.DataSetConverter.DataSetProcessingDelegate(IntPtr arg)
InnerException:

Microsoft Visual Studio 2010 Version 10.0.40219.1 SP1Rel
Crystal Reports for .NET Framework 4.0 (CRforVS_13_0_2)
project WPF net 4.0
crReport = new Reports.Buh.Cma.cr_balances_cma_move();
using (DataTable tbl = new DataTable())
   using (SqlConnection cn = new SqlConnection(ConnectToDataBase.GetSqlConnectionString()))
         using (SqlCommand cmd = cn.CreateCommand())
                cmd.CommandText = "proc_name";
                cmd.CommandType = CommandType.StoredProcedure;
                using (SqlDataAdapter da = new SqlDataAdapter(cmd))
                        cn.Open();
                        da.Fill(tbl);
crReport.SetDataSource(tbl);
crReport.SetParameterValue(4, param["report_name"]);
myDateTime.GetServerDate();
crReport.SummaryInfo.ReportAuthor = App.GetPrintInfo();
e.Result = crReport;
erorr_message - Could not load file or assembly 'file:///C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet1\crdb_adoplus.dll' or one of its dependencies. Не удается найти указанный файл.
help plz

Report error for certain users

I am having an issue with a report where an error occurs randomly. Here is the simplified run down of the issue.
I have a SRS report loaded to 2008 SRS instance that has 1 dataset that runs a stored procedure which then populates a table in a report. The database is a replicated version of our test database but the OLTP database has not been updated so the data is
the same and has not been changed. I have run the report 100's of times and every time is works perfectly. However a customer of mine runs it and once in a while they get the following error message, "sub query returns more than 1
value, This is not permitted when the sub query follows....". To me this points to a SQL query issue. However if I use the same parameters the customer is using no such error occurs. I have ran their parameters through both the
stored procedure directly and through the report UI and I cant reproduce the errors. Running SQL profiler doesn't reveal anything. I am running out of options so I would like to hear if anyone has any suggestions. I can provide further details if
needed.

Hi blkPony,
According to your description, there is a SSRS report of SQL Server 2008, it retrieves data from a stored procedure. When customers run the report, they get the error message: sub query returns more than 1 value, this is not permitted when the sub query
follows....
According to the error message, there is subquery in the procedure, something like below:
Select * from orders where customer_id = (select customer_id from customer where name ='Bob')
The cause of the issue is that subquery in the procedure returns multiple rows. If there is more than one customer named Bob, there will be more than on customer_id returned, so the “=” operator won't work. To fix the issue, we can use in instead of “=”
or use TOP 1 to return only one value.
Here is a relevant thread you can reference:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/18d8b92c-f3d5-4b19-a020-46cc94813158/subquery-returned-more-than-1-value-this-is-not-permitted-when-the-subquery-follows-?forum=transactsql
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

ORA-32003: error occured processing parameter 'distributed_transactions'

Hi,
We are having oracle 10g database on AIX platform.As of now,Our database is running on pfile and We wanted the database to run on spfile.I tried to create the spfile and It is throwing the below error.Could somebody help me out on this issue...
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'distributed_transactions'
LRM-00101: unknown parameter name 'distributed_transactions'
I read the following old thread in this discussion forum related to this error , but I could not find a solution in that thread.
error occured processing parameter

Hi Satish,
I'm not sure.I have taken up this project recently and seeing lot of issues with the databases,might be lack of proper administration.
For some other database also I'm getting the same error for the parameter 'job_queue_interval'
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'job_queue_interval'
LRM-00101: unknown parameter name 'job_queue_interval'
If these are the parameters from oracle 8.1.7,can I comment these out.
or How can I resolve these issues related to the parameters.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

Query engine failed error for crytal report refreshing to new params in jsp

Using licensed weblogic 8.1 server in production mode. Weblogic workhsop has inetegrated supprot for crystal reports 9. Using standalone report & accessing sql server through odbc, i got result for different parameters passed.
Problem Area : Passing parameter to have specific report causes unexpected query engine failed error in com.crystaldecisions.report.web.viewer.CrystalViewer class. If viewer.refresh method is commented, then static (already saved) report is displayed through jsp. But using viewer.refresh method for dynamic report genertaion for new parameters through jsp gives above error.

Hello
I'm experiencing the same problem. Please let me know if you've any solution.

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Error: Missing initial value for session parameter

Hi,
I'm facing a problem while running the ETL process for Complete 11.5.10 Execution Plan in DAC Client. Some tasks are getting failed beacuse of the following error:-
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: VAR_27026 [Error: Missing initial value for session parameter:[$DBConnection_OLAP].].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6270 [Error: Variable parameter expansion error.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6163 [Error initializing variables and parameters for the paritition.].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: CMN_1761 [Timestamp Event: [Mon Nov 19 21:01:52 2007]].
ERROR : TM_6292 : (5080|4064) Session task instance [SDE_ORA_Product_Category_Derive_Full]: TM_6226 [ERROR: Failed to initialize session [SDE_ORA_Product_Category_Derive_Full]].
ERROR : LM_36320 [Mon Nov 19 21:02:08 2007] : (2108|2632) Session task instance [SDE_ORA_Product_Category_Derive_Full]: Execution failed.
When i checked the parameter file i can see the value assigned to the $DBConnection_OLAP. The same tasks ran successfully when i ran the ETL process for Complete 11.5.10 for the first time. I did not change anything after that and also all these are came built-in with the installation of Oracle BI Applications.
Please anyone give me an idea what is causing the problem.
Thanks,

in DAC > Run History > Task Details, query
Name = SDE_ORA_Product_Category_Temporary
Open Status Description, look for string -lpf, the file after it is the actual parameter file DAC send to INFA server. E.g
-lpf D:\DACTOPUS\Informatica\parameters\SDE_ORAR12_Adaptor.SDE_ORA_Product_Category_Temporary.txt
Open the parameter file, most likely the [session_name] does not match with SDE_ORA_Product_Category_Derive_Full or some parameters are missing.

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

CRM Web UI - Authorisation error for Dashboard report

Hello
I am accessing CRM specific BI reports on CRM Web UI for areas like Lead Analysis, Marketing and Campaign Analysis etc, and most of the reports are working fine. But when I try to access a dashboard report (I am not really sure if it is called daashboard report beside the report name- it gives me an Authorisation error saying that the 'User does not have proper authorisations'.
I have tried by assigning the role SAP_CRM_OR_USER suggested by a colleague, but even then I get the same error. Our Basis team does not have an idea on the exact role to be used.
Could anyone of you please tell me the exact role to be used in order to see those report on Web UI. Thanks.

Hi Sven
I have tried that option of the transaction ORDYWB to activate the reports (this was also suggested in a SAP note i.e. to create a Z report and the code for which was given in the SAP note and upon executing the report, it showed a number of activities which have to be performed and had to implement those activities one by one). But in that transaction all the reports and InfoTypes are active with status 'OK'
If you could give me the exact role which you have used for those reports, I will give it a shot. Also, in the CRM Web UI, I am unable to see the technical name of the report of the interactive report (dash board report?). If the report was executing in the CRM Web UI, we could see the technical name of the report, but for the non-executing reports, could you please tell me how to see the technical name?
I have raised this to SAP and looks like even they are having a hard time finding the solution. Thanks.

Select multiple items from a list box as values for a parameter of crystal report and Oracle procedure

- I have a Product list box (asp.net) used as multiple selected values for a parameter.
- The Product ID is defined in the Oracle procedure as NUMBER data type.
- In my crystal report, I have a parameter field allow multiple values as p_product_id type as Number. This is the code in my Record Selection Formula for the report:
({?p_product_id}[1] = -1 OR {Procedure_name.product_id} in {p_product_id})
- In C#, this is my code
List<decimal?> productUnit = new List<decimal?>();
int counter = 0;
decimal prod;
for (int i = 0; i < lstProducts.Items.Count; i++)
              if (lstProducts.Items[i].Selected)
                            if (decimal.TryParse(lstProduct.Items[i].Value, out prod))
                                productUnit.Add((decimal?)prod);
                                counter++;
       if (counter == 0)
                   productUnit.Add(-1);
ReportingDAO rDataFactory = new ReportingDAO();
retVal = rDataFactory.GetProductReport(productUnit);
public CrystalDecisions.CrystalReports.Engine.ReportDocument GetProductReport(List<decimal?> productUnit)
          CrystalDecisions.CrystalReports.Engine.ReportDocument retVal = new rptProductDownload();
          ReportLogon rptLog = new ReportLogon();
         rptLog.Logon(retVal, "RPT_PRODUCT_DOWNLOAD");
         retVal.SetParameterValue("p_product_id", productUnit);
I keep having the "Value does not fall within the expected range" when I debug. My question is, is the data type I used for procedure/Crystal report/ and C# correct ? I always have problem with the data type. Any help would be
appreciated
Thank you

Hi progGirl,
Thank you for your post, but Microsoft doesn't provide support for CrystalReport now. Please post your question in SAP official site here:
http://forums.sdn.sap.com/forum.jspa?forumID=313
Thank you for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Scheduling Error For Web Intelligence Reports

Dear Experts,
    I want schedule BO XI R3.1 SP 3 Web Intelligence reports.
    For this i want to give Adaptive job server :destination details.
    Can you suggest what i need to enter for below details?
   1)Host    ?
   2)Port?
   3)Domain Name?
   For Host can i give BO CMC name or can i give BO Server IP Address or suggest me right one?
   For Port can i give CCM -->Adaptive job server PID value or CMS Port or SIA Port or Suggest me right one?
   For Domain name what i need to enter?
   The errors i am getting as shown below while scheduling with different ways as i mentioned above..
Error Message:     server error. []: [CrystalEnterprise.Smtp]
Remote Instance in Federated Cluster:     No
   Error Message:     server error. [Error initializing SMTP server. Return code: [TCP send failed.]. Reason:                               [Port address].] [CrystalEnterprise.Smtp]
Reply will be appreciated
Regards,
Venkat.

Thanks a lot Konovolav,
Can you tell how can i find SMPT server details to fill host, port and domain name for email scheduling?
I can able to connect to Internet in my BO server.
Can you tell me the path to find above details?

Error -: AIP-16012: Parameter: trading Partner is unique for object Trading

Hi Gurus,
When I go to rename the b2b server under trading partners, I receive the following error:
An error occurred when updating the trading partner.
1. Error -: AIP-16012: Parameter: trading Partner is unique for object Trading Partner Identification
2. TradingPartner.TradingPartner - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
3. PartyIdentificationType.TradingPartnerIdentificationType - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOLATION
4. Value - Error -: AIP-11052: Writing following objects: Trading Partner Identification failed due to following constraint violation: TRADINGPARTNERIDENTIFICATION_UK. UNIQUE CONSTRAINT VIOL
This occurs after I purge the b2b and even manually delete the trading partner that has the name that I require to change the server to (required for quality assurance testing). When I check the identifiers, there are two name ones (one of them is the one I am trying to change to) but I cannot delete any of them as it is grayed out.
Any thoughts?
Thanks
Gerald
Edited by: Gerald M. on Nov 30, 2009 8:50 AM -addtional info

Solved the issue, I manually delete entries in b2b.tip_tradingpartneriden_aud and b2b.tip_tradingpartneridentifica_t.
Is this safe to be doing this?
Thanks
Gerald

Drillthrough report error for AssignedTo parameter

Similar Messages

Maybe you are looking for