ORA-32003: error occured processing parameter 'distributed_transactions'
Hi,
We are having oracle 10g database on AIX platform.As of now,Our database is running on pfile and We wanted the database to run on spfile.I tried to create the spfile and It is throwing the below error.Could somebody help me out on this issue...
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'distributed_transactions'
LRM-00101: unknown parameter name 'distributed_transactions'
I read the following old thread in this discussion forum related to this error , but I could not find a solution in that thread.
error occured processing parameter
Hi Satish,
I'm not sure.I have taken up this project recently and seeing lot of issues with the databases,might be lack of proper administration.
For some other database also I'm getting the same error for the parameter 'job_queue_interval'
SQL> create spfile from pfile;
create spfile from pfile
ERROR at line 1:
ORA-01078: failure in processing system parameters
ORA-32003: error occured processing parameter 'job_queue_interval'
LRM-00101: unknown parameter name 'job_queue_interval'
If these are the parameters from oracle 8.1.7,can I comment these out.
or How can I resolve these issues related to the parameters.
Similar Messages
-
Error occured processing parameter
Hi,
I need to set new value for log_buffer. so what I did was i issued the following command at sql command prompt
alter system set log_buffer=50M scope=spfile;
it throws
ORA-012095: specified initialization paramer cannot be modified
so i brought the DB down and I made an entry(log_buffer=50m) in the initfile
and saved. Then, when I try to create spfile from pfile;
it throws error
ORA-91978:failure in processing system parameters
ORA-32003:error occured processing parameter 'log_buffer'
Due to this I couldn't resize the log buffer.
can anyone help me in how to set log_buffer
Please help in this..... I will e grateful to you
OS:AIX
oracle:10.2.0.2.0
Thanks in advance
With Regards
BooWhat are you trying to resolve or trying to accomplish?
Setting log_buffer to 50M doesn't make any sense at all,
as the log_buffer will be written when 1M is dirty or when it's one third full, whichever occurs first.
You are likely wasting some 45M of memory.
Sybrand Bakker
Senior Oracle DBA -
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing L
Hi There,
I am trying to load XML data [Given Below] into a table using "Load XML Data" option.
<?xml version="1.0"?>
<ROWSET>
<ROW>
<ID>13</ID>
<TYPE_SEQ>8</TYPE_SEQ>
<TYPE>B749</TYPE>
<TYPE_DESC>B758</_TYPE_DESC>
<EFFECTIVE_FROM>2099-01-01</EFFECTIVE_FROM>
<EFFECTIVE_TO>2099-01-01</EFFECTIVE_TO>
<CREATED_BY>958344</CREATED_BY>
<CREATED_ON>2099-01-01</CREATED_ON>
<UPDATED_BY>172283</UPDATED_BY>
<UPDATED_ON>2099-01-01</UPDATED_ON>
</ROW>
</ROWSET>
It throws the following error.
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00222: error received from SAX callback function
Can any one advice the solution please.
-Sudheer.Hi Sudheer,
This is caused by the date format you are using. Probably it is not matching with your NLS settings. Check your NLS settings, what the date format is, and use that in the XML.
Check it with this code:
SELECT XMLELEMENT("date", sysdate) FROM dual;Make sure, you have your NLS_DATE settings in the same format.
Check it with:
SELECT * FROM v$nls_parameters WHERE parameter = 'NLS_DATE_FORMAT'And then make sure it is the same by setting for example:
ALTER SESSION SET NLS_DATE_FORMAT = 'YYYY-MM-DD';Greetings,
Rutger -
ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing
Hi,
I am trying to update an already existing Sales Order through PO Change Inbound 860. When i am performing changes in the line quantity and scheduled ship date with operation code as "Update" then it is successfully updating the Order and also we are able to generate the POAck for the updated sales order lines. But when i am rejecting one of the PO change lines by checking rejected flag, then order is getting imported successfully(I mean sales order is getting updated successfully) but during the POAck Generation i.e. 865 its raising "*ORA-31011: XML parsing failed ORA-19202: Error occurred in XML processing LPX-00103: Warning: document structure does not match DTD Error at line 1*" at XML Gateway. we are using XML Gateway to process the orders, can somebody help me to get rid of this issue. Thanks in advance.
Thanks,
Sunil ChauhanHi Kishan
Thanks for the reply.
Because this is an outbound transaction so i can not provide you the XML file as we are facing issue to generate the same. Also we are using oracle seeded PO outbound Ack map.
In addition i can provide you the DTD file.
<!-- ==================================================== -->
<!ENTITY % RESOURCES SYSTEM "oagis_resources.dtd">
%RESOURCES;
<!-- ==================================================== -->
<!ELEMENT ACKNOWLEDGE_PO_008 (CNTROLAREA, DATAAREA+)>
<!ATTLIST VERB
value CDATA #FIXED "ACKNOWLEDGE"
>
<!ATTLIST NOUN
value CDATA #FIXED "PO"
>
<!ATTLIST REVISION
value CDATA #FIXED "008"
>
<!ELEMENT DATAAREA (ACKNOWLEDGE_PO)
>
<!ELEMENT ACKNOWLEDGE_PO (POORDERHDR, POORDERLIN*)
>
<!ELEMENT POORDERHDR ((%DATETIME.DOCUMENT;)?, (%OPERAMT.EXTENDED.T;)?, POID, POTYPE, ACKREQUEST?, CONTRACTB?, CONTRACTS?, DESCRIPTN?, NOTES*, OPRAMTAUTH?, PORELEASE?, TAXWHEXMPT?, USERAREA?, ACKHEADER, ATTCHREF*, CHARGE*, PARTNER*, POTERM*)
>
<!ELEMENT ACKHEADER (SENDER, (%DATETIME.PROMDELV;)?, (%DATETIME.PROMSHIP;)?, ACKCODE, DESCRIPTN?, NOTES*, SALESORDID?, USERAREA?)
>
<!ELEMENT POTERM (DESCRIPTN?, TERMID?, ((DAYOFMONTH, PROXMONTH) | DAYSNUM), ((%OPERAMT.EXTENDED.T;) | (%QUANTITY.PERCENT;)), USERAREA?)
>
<!ELEMENT POORDERLIN ((%QUANTITY.ORDERED;), (%DATETIME.NEEDDELV;)?, (%OPERAMT.UNIT.T;)?, POLINENUM, DRAWING?, HAZRDMATL?, ITEMRV?, ITEMRVX?, NOTES*, PACKING?, POLNSTATUS?, TAXWHEXMPT?, ((DESCRIPTN, ITEM?, ITEMX?, UPC?) | (ITEM, ITEMX?, UPC?) | (ITEMX, UPC?) | (UPC)), USERAREA?, ACKLINE*, ATTCHREF*, CHARGE*, DISTRIBUTN*, PARTNER*, POTERM*, POSUBLINE*, POLINESCHD*)
>
<!ELEMENT ACKLINE ((%DATETIME.PROMDELV;)?, (%DATETIME.PROMSHIP;)?, (%QUANTITY.ORDERED;)?, ACKCODE, NOTES*, SALESORDID?, USERAREA?)
>
<!ELEMENT POSUBLINE ((%QUANTITY.ITEM;), DRAWING?, ITEMRV?, ITEMRVX?, PSBLINENUM?, ((DESCRIPTN, ITEM?, ITEMX?, UPC?) | (ITEM, ITEMX?, UPC?) | (ITEMX, UPC?) | (UPC)), USERAREA?)>
<!ELEMENT POLINESCHD ((%DATETIME.NEEDDELV;), (%QUANTITY.ORDERED;), DESCRIPTN?, PSCLINENUM?, USERAREA?)
>
Thanks,S
--Sunil -
ORA-19202: Error occurred in XML processing
HI,
I was preparing a support schema which is in synch with the production schema. For one of the UI i am getting the following error when the XML is too large.
The same code is working in the production schema.
I did a reconcilation and found the code sources are exactly the same.Pasting the debug lines below.Please help resolving the issue.
gwpks_service_router.Getting the msg status for
gwpks_service_router.Inside fn_get_msgstat
gwpks_service_router.In wot of msg stat extraction: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00225: end-element tag "REC" does not match start-element tag "FCUBS_BODY"
Error at line 15697
gwpks_service_router.l_msgstat:
gwpks_service_router.Returning
gwpks_service_router.l_msg_stat:
gwpks_service_router.p_Process_Stat: S
gwpks_service_router. fn_service_router return true
gwpks_service_router.After fn_service_router, msgId:
gwpks_service_router.Logging begins
gwpks_service_router.Inside fn_populate_logs
gwpks_service_router.Inside fn_get_msgstat
gwpks_service_router.In wot of msg stat extraction: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00225: end-element tag "REC" does not match start-element tag "FCUBS_BODY"
Error at line 15697
gwpks_service_router.l_msgstat:
gwpks_service_router.Returning
gwpks_service_router.Msg Status:
gwpks_service_router.About to start the logging with MsgId:
gwpks_service_router.fn_populate_logs returning true
gwpks_service_router.MsgId:
gwpks_service_router.SysMsgId:
gwpks_service_router.MultitripId:
gwpks_service_router.l_process_stat in pr_process_req_msg : S
gwpks_service_router.GRAND SUCCESS CLOSING DEBUG
gwpks_service_router.GRAND SUCCESS CLOSING DEBUG 1Hi,
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
The code is very big.I prepared another schema on another database and the code is working.
Then v$ version of the working schema is as below:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
Still wonder why this works in the second schema but not the first one. -
ORA-19202: Error occurred in XML processing ORA-24333: zero iteration coun
Hi,
I have a procedure which craetes a sql v_sql dynamically
IF v_cnt > 0 THEN
For c1 in v_curr
LOOP
v_sql := ''''||'SELECT * from '|| c1.msg_rcrd_src_tbl_nm||' where rowid = '||''''||''''||c1.msg_rcrd_src_tbl_id||''''||''''||'''';
select DBMS_XMLGEN.getXMLtype(v_sql) into v_xml from dual ;
gives me a error
ORA-19202: Error occurred in XML processing
ORA-24333: zero iteration count
ORA-06512: at "SYS.DBMS_XMLGEN", line 288
ORA-06512: at line 1
Any help greatly appreciated.
Thanks,
RajAnswered
Re: Zero iteration error - when processing dynamic sql in dbms_xmlgen -
Error while processing XML ; ORA-19202: Error occurred in XML processing
We have an application, which sends an XML to DB for processing.
While it works in general, it is failing, when special characters are present in the text node
see example below
<?xml version="1.0" encoding="UTF-8"?>
<Query>
<Group>
<Value> %</Value>
</Group>
</Query>
Db throws following error while parsing this xml
XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00217: invalid character 15573180 (U+EDA0BC)
How to fix it?The following works for me on 11.2.0.2, db charset AL32UTF8 :
test_sample.xml, encoding UTF-8 :
<?xml version="1.0" encoding="UTF-8"?>
<Query>
<Group>
<Value>?%</Value>
</Group>
</Query>NB : the characters behind the "?" got lost after posting, they're actually 0xF09F 8C82
Loading...
SQL> truncate table tmp_xml;
Table truncated
SQL>
SQL> insert into tmp_xml values (
2 xmltype(
3 bfilename('TEST_DIR','test_special.xml')
4 , nls_charset_id('AL32UTF8')
5 )
6 );
1 row inserted
SQL> set long 500
SQL> select * from tmp_xml;
SYS_NC_ROWINFO$
<?xml version="1.0" encoding="UTF-8"?>
<Query>
<Group>
<Value>í ¼í¼‚%</Value>
</Group>
</Query>
Edited by: odie_63 on 25 sept. 2012 23:00 -
ORA-20100: Error occurred while processing: Function 'test' not found.
this program follow:
declare
p xmlparser.Parser;
xmlbuf varchar2(512);
xmlpat varchar2(512);
xmldoc xmldom.DOMDocument;
xmldocnode xmldom.domnode;
n xmldom.domnode;
begin
xmlbuf:='<emps><emp>odp</emp></emps>';
xmlpat := 'emps/emp/test()';
p:=xmlparser.newParser;
xmlparser.parseBuffer(p,xmlbuf);
xmldoc:=xmlparser.getDocument(p);
xmldocnode :=xmldom.makeNode(xmldoc);
n:=xslprocessor.selectSingleNode(xmldocnode,xmlpat);
--dbms_output.put_line('value of first selected node is:ok');
exception
when others then
raise;
end testxml;
message of error:
ORA-20100: Error occurred while processing: Function 'test' not found.
ORA-06512: at line 20.
please quick reponse.Steve,
Yes it helps. I was able to finally figure this much out, however, in order to get the quotes to get handled right, I had to declare the xsl inline and I had to change (there quite a few, this just being an example) the following line from
<xsl:when test="normalize-space(string(sub_container_settings/initial_investment)) = ''">10000</xsl:when>
to
<xsl:when test="normalize-space(string(sub_container_settings/initial_investment)) = ''''">10000</xsl:when>
This works, but I would prefer to store the xsl in a CLOB. Neither of these work when I get the document from the clob and call the xmldom.parseClob procedure. The parser fails with an error that the document is not valid.
Do you have any idea on how to handle the single quotes in this circumstance. -
ORA-29702: error occurred in Cluster Group Service operation
Hi,
After shutting down one node I'm trying but without success to start this node up:
SQL> startup
ORA-29702: error occurred in Cluster Group Service operation
I got this message.
Here is a log from file: orcl2_lmon_13886.trc
/oracle/admin/orcl/bdump/orcl2_lmon_13886.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters and Data Mining options
ORACLE_HOME = /oracle/DB
System name: Linux
Node name: DB2
Release: 2.6.18-53.el5
Version: #1 SMP Wed Oct 10 16:34:19 EDT 2007
Machine: x86_64
Instance name: orcl2
Redo thread mounted by this instance: 0 <none>
Oracle process number: 5
Unix process pid: 13886, image: oracle@DB2 (LMON)
*** SERVICE NAME:() 2008-12-19 10:08:26.214
*** SESSION ID:(1102.1) 2008-12-19 10:08:26.214
GES resources 21522 pool 8
GES enqueues 33158
GES IPC: Receivers 3 Senders 3
GES IPC: Buffers Receive 1000 Send (i:2750 b:1934) Reserve 1000
GES IPC: Msg Size Regular 408 Batch 8192
Batching factor: enqueue replay 201, ack 224
Batching factor: cache replay 126 size per lock 64
kjxggin: receive buffer size = 32768
clsc_connect: (0x1d19a030) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
2008-12-19 10:08:29.819: [ CSSCLNT]clsssInitNative: connect failed, rc 9
kgxgncin: CLSS init failed with status 3
kjxgmin: kgxgncin fails - (2)
kjxggin: generic group layer init fails
*** 2008-12-19 10:08:29.819
Global Enqueue Service Shutdown
*** 2008-12-19 10:08:29.820
global enqueue service detaching from CM:pid=13886
I did check listener, it did not work but I start it up:
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.3.0 - Production
Start Date 19-DEC-2008 10:49:42
Uptime 0 days 0 hr. 3 min. 55 sec
Trace Level off
Security ON: Local OS Authentication
SNMP ON
Listener Parameter File /oracle/DB/network/admin/listener.ora
Listener Log File /oracle/DB/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
The listener supports no services
The command completed successfully
LSNRCTL>
Could you give me a guide how to start up this node? or where is a problem?A quick search of the Oracle documentation on the error number comes up with this
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96525/e29250.htm#1000969
ORA-29702 error occurred in Cluster Group Service operation
Cause: An unexpected error occurred while performing a CGS operation.
Action: Verify that the LMON process is still active. Also, check the Oracle LMON trace files for errors.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC -
ORA-00604: error occurred at recursive SQL level 1 (Call to a Oracle View)
I have created a view that refers to a package function within the sql select.
Like
E.x
CREATE OR REPLACE VIEW VW_TAX
as select
test_pkg.fn_get_gl_value(acct_id) desired_col1,
test_pkg.fn_get_gl_desc_value(acct_id) desired_col2
From tables a, b
a.col= b.col
The sample function( fn_get_gl_value) is embedded into a package (test_pkg).
Function fn_get_gl_value:
It earlier referred to table A1, B1, C1 and this query took really long, Therefore I used object type tables and stored the values required once within the package when it is invoked. Later I used the Tables A1, B1 and C1(table Cast from the type Table Loaded in Package Memory)
The query was fast and fine, but now when I try to re-use the view
select * from VW_TAX
where acct_id = '02846'
It fails with this message
09:32:35 Error: ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
Note: The database is Oracle8i Enterprise Edition Release 8.1.7.4.0.
Maximum cursors database is 500
Please let me know if there is any known solution,
Appreciate all your help
Thanks
RPSeems like your OPEN_CURSORS init.ora parameter is set too low.
See Metalink Note:1012266.6 for details.
ORA-01000: "maximum open cursors exceeded"
Cause: A host language program attempted to open too many cursors.
The initialization parameter OPEN_CURSORS determines the
maximum number of cursors per user.
Action: Modify the program to use fewer cursors. If this error occurs
often, shut down Oracle, increase the value of OPEN_CURSORS,
and then restart Oracle. -
Ora-00604:error occurred at recursive SQL level 1 and Ora-04023
hi all
i am using oracle linux 5.5 and oracle Database 11g R2 while shutingdown the database i am getting
the following errors.
SQL> shutdown immediate;
Ora-00604:error occurred at recursive SQL level 1
Ora-04023: object select count(*) from reg$SQL>plz can anyone help me out?Couple of questions related to this issue:
1.Is there anything in alert log. Post last 50 lines from alert log.
2.Is there any trace / log generated by Oracle ?
3.What is Memory_Target parameter value ?
4.What is value of statistics_level parameter ?
5.Did you perform any failed upgradation ?
6.Are there any invalid objects in database ?
Generally ORA-00604 is related to insufficient size of shared pool. Now, i am googling how to get a proper value of shared pool size ? I got that there is a view v$shared_pool_advice which will tell me the answer of this question. Ok, it means now question is how do i get the proper value of shared pool from v$shared_pool_advice; i mean how do i interpret this v$shared_pool_advice view ?
No problem docs are there to answer this question : (How i got this link ? Open a new page---http://tahiti.oracle.com---selected 11.2 docs--in the left hand sided there is a search text box i entered v$shared_pool_advice and i got couple of links)
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/dynviews_3037.htm#REFRN30239
I will read these links and now i will query this and DBA_HIST_SHARED_POOL_ADVICE views, interpret the values. Ok, but what about my original question i.e. ORA-00604 and 4023 ? If i am at this stage, understood all the values, it means now i can understand the meaning / sense of resizing of shared pool.
ALTER SYSTEM SET statistics_level=TYPICAL SCOPE=SPFILE;
You can monitor V$SGA_RESIZE_OPS to identify the range of values that Oracle is automatically resizing the DB_CACHE_SIZE and SHARED_POOL_SIZE components to. Then, pick an appropriate minimum value based on the range. There's no "magic formula". But V$SGA_RESIZE_OPS shows the sizes that Oracle has been automatically been resizing the SGA components to. The Buffer Cache Advisory section of the AWR report or V$DB_CACHE_ADVICE, V$SHARED_POOL_ADVICE, V$SGA_TARGET_ADVICE and DBA_HIST_SGA_TARGET_ADVICE are views that provide advisory information as well. Hemant @ SGA_MAX_SIZE and SGA_TARGET how to set minimum for pools
So, these are the baby steps if i ever gets ORA-00604 and ORA-04023 on my test database. Do all these and feel free to post the next doubt, i am sure you will get the correct answer.
Regards
Girish Sharma -
ORA-00604:error occurred at recursive SQL level1 ORA-01000:maximum open cur
Dear Experts,
I got Error During WebLoad Testing.
Please give me solution.
java.sql.SQLException: ORA-00604: error occurred at recursive SQL level 1 ORA-01000: maximum open cursors exceededIt depends on how may cursors are used in your program and the parameter value for OPEN_CURSORS. If it is not possible to reduce the number cursors used in the program increase the OPEN_CURSORS value.
regards -
ORA-00604: error occurred at recursive SQL level 1 + ORA-04031
Hi,
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Solaris: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
os version : SunOS oratest 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V210
SQL> show parameter sga_target
NAME TYPE VALUE
sga_target big integer 892M
SQL> show parameter shared_pool_size
NAME TYPE VALUE
shared_pool_size big integer 112M
when i do normal query i am getting ora-04031 error and 10g server is Automatic Shared Memory Management since i set sga_target and server as to do automatically readjusts the sizes of memory pools, if that is the case why it throwing ora-04031 error;
below errors showing before bounce the database
SQL> show parameter size
ORA-04031: unable to allocate 3840 bytes of shared memory ("shared
pool","unknown object","sga heap(1,0)","kglsim object batch")
SQL> select * from tab
2 ;
select * from tab
ERROR at line 1:
ORA-04031: unable to allocate 3840 bytes of shared memory ("shared
pool","select * from tab
","sga heap(1,0)","kglsim object batch")
alert log file:
Errors in file /oracle/admin/appsdb/bdump/appsdb_smon_19154.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 3840 bytes of shared memory ("shared pool","unknown object","sga heap(1,0)","kglsim object batc
h")
Thanks
PrakashEdited by: prakashdba on Jan 10, 2009 12:31 AM
Edited by: prakashdba on Jan 10, 2009 4:10 AMAnd your version number is?
And your patch level is?
And your hardware and operating system are?
What did you find when you looked this up at metalink?
Did you follow the advice in the metalink Knowledge Base docs? -
ORA-00604: error occurred at recursive SQL level 1 ORA-12705: invalid or un
Hello, I'm so worried because I can't resolve the following problem with my oracle clients on my desktop.
Initial state:
SO: Windows XP SP1
Oracle clients: Oracle 8i
Issue: I can get connection and access to the DB successfully
Middle state:
SO: Windows XP SP1
Oracle clients: The same Oracle 8i and a new Oracle 9 client.
Issue: We need to swap between each DB 8 and 9 using the HOME SELECTOR to get connections and access. I understand that the Oracle 9 Client have back-compatibility with 8i DBs. If I tray to get connection to the DB 8i using the Oracle 9 we get the following errors.
Errors: ORA-00604: error occurred at recursive SQL level 1
ORA-12705: invalid or unknown NLS parameter value specified
I decided to uninstall all the products (Oracle 8 and 9) using the Oracle Universal Installer. We didn't erase folders nor registers, we just used Oracle Universal Installer. Then we installed Oracle 10g
Final Sate:
SO: Windows XP SP1
Oracle clients: only Oracle 10g
Issue: I can get connection and access to the Oracle 9 DB. But trying with the Oracle 8i DB I got the same problem described above.
Errors: ORA-00604: error occurred at recursive SQL level 1
ORA-12705: invalid or unknown NLS parameter value specified
Please can somebody tell me how can I resolve this problem.
Thanks.
Luis CarlosYou need to check you're NLS environment settings, check out this thread
ORA-12705: invalid or unknown NLS parameter value specified -
ORA-00604: error occurred at recursive SQL level 2
Hello,
I am trying to create a simple table and I am getting a ora error as below.
SQL> create table album(name varchar2(100),image blob);
create table album(name varchar2(100),image blob)
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 2
ORA-01422: exact fetch returns more than requested number of rows
how to resolve this?Any help..
Thanks,
Ranz.Hi,
*@Anurag Tibrewal,*
I followed as per the order od statements you gave. Initially there was no table "ALBUM" when I executed the first 2 statements.
3rd staement i created a table "ALBUM" and then 4th and 5th statement showed that I have a table called "ALBUM".
Now when again I wanted to drop the table I am getting the same error.
SQL> drop table album
2 ;
drop table album
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01422: exact fetch returns more than requested number of rows
*@Jean-Valentin*
I am not finding the trace file for today as i checked the alert log. When i searched for the the error I found the error for March 4. No ora-00604 error from today.
As shown in ALERT LOG.
Thu Mar 04 10:50:41 2010
Errors in file d:\oracle\product\10.2.0\admin\raneeshtest\bdump\*raneeshtest_j000_5976.trc*:
ORA-00604: error occurred at recursive SQL level 1
ORA-04030: out of process memory when trying to allocate 172 bytes (Typecheck,seg:kggfaAllocSeg)
ORA-12012: error on auto execute of job 1
ORA-04030: out of process memory when trying to allocate 16428 bytes (pga heap,kgh stack)
Trace file details:
Dump file d:\oracle\product\10.2.0\admin\raneeshtest\bdump\raneeshtest_j000_5976.trc
Thu Mar 04 10:50:31 2010
ORACLE V10.2.0.3.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Personal Oracle Database 10g Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Windows NT Version V6.0 Service Pack 1
CPU : 2 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:27M/2037M, Ph+PgF:341M/4352M, VA:4M/2047M
Instance name: raneeshtest
Redo thread mounted by this instance: 1
Oracle process number: 15
Windows thread id: 5976, image: ORACLE.EXE (J000)
*** 2010-03-04 10:50:31.224
*** ACTION NAME:() 2010-03-04 10:50:30.276
*** MODULE NAME:() 2010-03-04 10:50:30.195
*** SERVICE NAME:(SYS$USERS) 2010-03-04 10:50:30.195
*** SESSION ID:(137.401) 2010-03-04 10:50:30.195
*********START PLSQL RUNTIME DUMP************
***Got internal error Exception caught in pfrrun() while running PLSQL***
***Got ORA-4030 while running PLSQL***
PACKAGE SYSMAN.MGMT_ADMIN_DATA:
library unit=3416af50 line=128 opcode=117 static link=0 scope=0
FP=3ca31374 PC=30f42000 Page=0 AP=3ca47b2c ST=3ca32778
DL0=3ca46564 GF=3ca465b0 DL1=3ca46584 DPF=3ca465a8 DS=30f421e4
DON library unit variable list instantiation
0 3416af50 3ca465b0 3ca2005c
1
2
3
4
5
6
7
scope frame
2 0
1 3ca31374
package variable address size
0 3ca46698 16
1 3ca466a8 16
2 3ca466b8 16
3 3ca466c8 16
4 3ca466d8 16
5 3ca466e8 20
6 3ca466fc 16
7 3ca4670c 20
8 3ca46720 16
9 3ca46730 4
10 3ca46734 4
11 3ca46738 4
12 3ca4673c 4
13 3ca46740 4
14 3ca46744 4
15 3ca46748 4
16 3ca4674c 4
17 3ca46750 4
18 3ca46754 4
19 3ca46758 4
20 3ca4675c 4
21 3ca46760 20
22 3ca46774 20
23 3ca46788 20
24 3ca4679c 20
25 3ca467b0 4
26 3ca467b4 4
27 3ca467b8 4
28 3ca467bc 4
29 3ca467c0 16
30 3ca467d0 16
31 3ca467e0 8
32 3ca467e8 39
33 3ca46810 39
34 3ca46838 521
35 3ca46a44 521
36 3ca46c50 140
37 3ca46cdc 140
38 3ca46d68 30
39 3ca46d88 30
40 3ca46da8 30
41 3ca46dc8 30
42 3ca46de8 30
43 3ca46e08 30
44 3ca46e28 30
45 3ca46e48 30
46 3ca46e68 30
47 3ca46e88 30
48 3ca46ea8 30
49 3ca46ec8 30
50 3ca46ee8 140
51 3ca46f74 140
52 3ca47000 30
53 3ca47020 30
54 3ca47040 30
55 3ca47060 30
56 3ca47080 39
57 3ca470a8 39
version=43123476 instantiation size=2920
line pcode offset
1 2
4 620
5 632
6 632
7 638
8 644
14 650
29 810
44 970
47 992
48 1000
49 1008
50 1016
51 1024
52 1032
53 1040
54 1048
55 1056
56 1064
57 1072
60 1080
128 1814
196 2548
197 2554
198 2560
199 2566
205 2572
206 2578
438 2584
1 2586
***********END PLSQL RUNTIME DUMP************
*** 2010-03-04 10:50:40.690
ORA-12012: error on auto execute of job 1
ORA-04030: out of process memory when trying to allocate 16428 bytes (pga heap,kgh stack)
*** 2010-03-04 10:50:41.206
ORA-00604: error occurred at recursive SQL level 1
ORA-04030: out of process memory when trying to allocate 172 bytes (Typecheck,seg:kggfaAllocSeg)
ORA-12012: error on auto execute of job 1
ORA-04030: out of process memory when trying to allocate 16428 bytes (pga heap,kgh stack)
SQL> select * from dual;
D
X
SQL>
This is the output. Its returning corredclty. Now what is the problem? Pls help me.
Maybe you are looking for
-
Convert payslip to PDF format , for e-mailing to employees
HI with respect to my previous post 'Salary slip delivery thru email' I have been able to send the email out in the html format. I want the employee to recieve the mail in the PDF format. I would like your assistance on this. Here is the code. tables
-
I have constant freezing when opeing up Final Cut Pro X (10.1) - the message given by the welcome-screen is "Restoring the window layout". I know this is an "old" problem and I've had it with earlier versions of FCPX as well - but now with 10.1 the p
-
Mapviewer Java Class Documentation
Is the Mapviewer java clase documented anywhere? TIA
-
Io exception the network adapter could not established
Hi friends, During Installing the oracle database 10g in linux its showing Error : exception occured while connecting to database.please check the connection details of the database you specified and retry. io exception : the network adapter could no
-
I upgraded from LabView 6 to Labview 8. At the same time, I put the old 4350 board into this new WinXP computer. The board works great in MAX, but LabView can't seem to find it. And can't use all of my old data acquisition VIs. According to MAX,