Droid Turbo missing calls, delivering texts late, not capturing call history, not updating e-mails

My wife got the Droid Turbo Ballistic Nylon just before Christmas as a replacement for her iPhone. She has been complaining that she is not getting calls, e-mails, text messages, voice mail messages. Last night, my son called her twice from California and there was no answer. Checking her phone there is no voice mail from him and her call history shows no attempts. I re-booted the phone and she suddenly got a flood of e-mails, call history, texts messages. She uses this for business and this is negatively impacting her buisness.
This morning I did a test. I forwarded an e-mail from her phone to me and then I replied to that e-mail, which is set up as IMAP on all devices. I could see my reply on her PC but nothing her phone minutes later. This test is being done in my home with all devices on the same Wi-Fi network. I re-booted the phone into Safe Mode and the e-mail came through. I don't know if it was just the additional length of time or putting it into Safe Mode. Based on the number of issues with multiple applications (she also says she is losing contact information) I am beginning to think that this is a hardware or OS problem. Anybody have any ideas?

I know that IMAP is sometimes set to auto-sync only every 15 min or more, according to default or user set amount of time. When you rebooted, the phone auto-synced with the email server. As far as missed calls and those not showing in logs, I'm not sure. I can say this though, I was missing calls and voicemails and came to find out that the Advanced Calling HD Voice VoLTE updates had negatively impacted my phone's service. I have since disabled and service is better. Perhaps the Turbo also has HD calling enabled and is experiencing similar issues because of that.

Similar Messages

Bug report: text does not update on the stage

I am not sure whether this has been reported:
I have several groups divs into one main group div. In these are images and text. I create a new group by copying elements from a previous group and then insert new text in the copied text box. The text does not update on the stage but is correct when I run the composition and also in the text panel.

Hi Hemanth.
I tried all day and is intermittent, why?, 'cause the numbers are now showing but the other texts not, this happen only on Chrome and Safari when the navigator screen increases size.
On Chrome:
On Firefox:
I discovered that the error appears only on the right side of the stage, if I move the buttons to center, the error disappears:
On Chrome (Fullscreen):
I have no idea of what is happening.

Droid Turbo Advanced Calling/ Internet Features Do Not Work!!!

This is my 2nd Droid Turbo since the phone came out last November. The first one had to be replaced because all the apps and the phone kept crashing. Let me just say that VERIZON and MOTOROLA both have some of the WORST Tech support I have ever experienced with a phone. I know more about these phones then they do. I even already know all the troubleshooting that they are going to make me do and waste my time!
I clearly tell the Level 2 tech support person that yes, Advanced Calling is enabled on my phone and on my account. Yes, it worked fine on my last Droid Turbo. As soon as I make a phone call the 4gLTE disappears and the phone says I have no Data Connection. I can't get on the internet unless I'm using WiFi. So ofcourse they try to trouble shoot it and that doesn't work so then they get Motorola on the line and this girl knows even less than the last one. On top of that she can't even speak English. Are you ************ kidding me! What a wast of my time. In the end they couldn't fix ********
I'll never buy another Motorola phone and I'll probably just cancel Verizon since they don't have service in my area anyway. Which btw, I live in LA but my house is on top of a hill where Verizon has no service so they told me I can cancel my contract anytime. Too bad for them!

When you say "does not work," what does that mean, exactly? What happens? Any error messages?

Droid Turbo 64gb call volume qualitity

Just got my Droid Turbo 64gb Ballistic Nylon a couple days ago. All great except call volume. Even at max volume I can barely hear the caller. But the caller hears me fine. Same thing when using speaker phone. My Moto X Xt1060 that this phone replaced was much better on call volume and clarity.
Anyone else having this issue?

Found info about this issue on Moto Support site. Several people have had this issue.
The speaker volume is so quiet. Is there a fix? . All Discussions (250) . DROID TURBO by Motorola . Forum . Motorola Ow…
Turning off Audio Effects in apps/settings/sound/audio effects worked for me.
And I do not have a case or screen protector as yet for this phone. Make sure neither cover the speaker slits on on front
top of the phone.

Jabber and Missed Call history

Hello
I am looking for and explanation or a document around expected behavior for how the Call Log works within the Jabber for Windows client. Our customers setup has Jabber for windows deployed in Deskphone Control mode, where the Jabber clients control a single physical phone. Predominantly a 7945 series phone. How in Sync is the "CALL HISTORY" (missed call, placed call, received call) lists within the Jabber client with the physical phone itself. Examples:
If we miss a call on the physical phone and Jabber is opened, we noticed that both the physical phone and Jabber client report a missing call.
If we miss a call and Jabber is closed, we notice the physical phone reports a missed call, but when Jabber sign's in the "MISSED Call" is not reported on the Jabber client.
Is this expected behavior?
if anyone can provide context or has a document that explains the expected behavior this would be very helpful to me.
Thanks

Jaime,
Just for clarity, I'm not talking about a CSF registered phone, I'm talking about Jabber running in Deskphone Control mode. So yes in a hopeful way I would expect the call history from the physical phones to be in sync since deskphone control is just remotely controlling the phone. I suppose the call history on a physical phone is likely stored locally on the phone itself and this is why they call logs do not remain in sync but i just wanted to confirm that this is a fact vs an assumption.
Thoughts?
Ryan

Problem with JButtons Text field not updating

Im working on a program (which has its full code included below incase its part of the problem) which wants to change a Jbutton's name during a program. The way I'm trying to make it change is by having a string, "test", be called "before update". then have the jbuttons text equal test. then, in an actionlistener, it changes string test to equal "after update". This doesn't update the Jbuttons text.
I don't get any errors when I press the button, but the buttons name is not updating. Whats causing the buttons name not to be updated?
Thanks for help in advance.
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
public class TicTac extends JFrame {
public int Teamplaying = 0;
public int CrossA, CrossB, CrossC, CrossD, CrossF, CrossG, CrossH, CrossI, CircleA, CircleB, CircleC, CircleD, CircleE, CircleF, CircleG, CircleH, CirclI, TLB, TMB, TRB, MLB, MMB, MRB, LLB, LMB, LRB = 0;
String test = "Before Update";
    public TicTac() {
         JPanel TicTac = new JPanel();
         TicTac.setLayout(new GridLayout(3,4));
              TicTac.add(new JButton(test));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              TicTac.add(new JLabel("a"));
              setContentPane(TicTac);
         pack();
         setTitle("Add Numbers Together TicTac");
         setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         setLocationRelativeTo(null);
    class TopLeftBox implements ActionListener {
         public void actionPerformed(ActionEvent e) {
         String test = "After update";
         if (Teamplaying == 0) {
              CrossA = CrossA + 1;
              CrossD = CrossD + 1;
              CrossG = CrossG + 1;
         else {
              CircleA = CircleA + 1;
              CircleB = CircleB + 1;
     public static void main(String[]args) {
    TicTac Toe = new TicTac();
    Toe.setVisible(true);
}

1) Strings are immutable meaning you can't change them.
2) Even if you could, the two test strings are completely different variables.
3) To change JButton text, you should call its setText method.
4) For a JButton to perform an action on button press, it needs to have an actionlistener added to it via the addActionListener(...) method.
5) Please read, study, and review the Sun Swing tutorials. You will benefit greatly from having a solid foundation in Swing basics before you try coding in Swing.
Good luck.
Edit: a small example code (SSCCE, if you will):
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
public class Frame extends JFrame
    public Frame()
        JPanel panel = new JPanel();
        JButton button = new JButton("Before Update");
        button.addActionListener(new ButtonListener()); // add actionlistener here
        panel.add(button);
        setContentPane(panel);
        pack();
        setTitle("Frame");
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        setLocationRelativeTo(null);
    private class ButtonListener implements ActionListener
        public void actionPerformed(ActionEvent e)
            // get the button that called this action
            JButton button = (JButton)e.getSource();
            // update the button's text
            button.setText("After update");
    public static void main(String[] args)
        SwingUtilities.invokeLater(new Runnable()
            @Override
            public void run()
                new Frame().setVisible(true);
}Edited by: Encephalopathic on Apr 28, 2008 9:26 PM

BAPI_ACC_DOCUMENT_POST line item text SGTXT not updating

Hi,
We have copied following LSMW for opening balance upload from ECC 5 to ECC 6.
When we upload through LSMW (BAPI_ACC_DOCUMENT_POST ) which is used for uploading opening balances of G/L accounts field Long Text (Tech Name: ITEM_TEXT) not updating.
Form Vendor and Customer Opening balances LSMWs Long Text (Tech Name: ITEM_TEXT) field of G/L line item is not updating. According to my observation data field SGTXT of BSEG table. not getting updated through this LSMW. I have tried same transaction through T Code F-02 and it is updating field SGTXT of BSEG table. As per confirmation from business same LSMWs are working fine in ECC 5.
Jigar

hi experts,
no body faced this situation?
Any suggestions ?
kindly give me any inputs
thanks & regards,
Raghul
Edited by: Raghul Gandhi on Aug 11, 2009 11:32 AM
Edited by: Raghul Gandhi on Aug 11, 2009 12:56 PM

Gmail folders do not update in Mail

Ever since upgrading to Mavericks my Gmail folders do not update in the Mail app. I don't have this problem with my iOS devices (iPhone 5 or iPad 3) both running the latest iOS version. Is there a work around.

So i pretty much got ticked at my iphone. Not only was my "sent folder" not updating, the new 2.0 was crashing and hanging all my applications. e-mail photos wont send, got error messesges , at least every application crashed at some point in the last week, even after i did a restore and back-up. SO pretty much i restored to factory out of the box settings and just started as a "new iphone".
as for the whole "sent folder" not updating. I changed the setting to download "Last 200" messeges. Then i kept updating until all 1,000 messeges were downloaded. After that point my iphone would update whenever i sent new messeges. But it would take forever cause it was checking against a 1,000 e-mails for new ones.... SO i give up, i just dumped all my "sent e-mails" to a new folder called "sent archives" ( u can call it whatever u want). I think this is the easiest fix for now.
if i get any more issues.. i'm just gonna go restore my phone back to the software rev before 2.0 came out....
so

My messenger not working properly on my iPhone 6 freezes completely and I miss all my texts just not working. anyone else having this issue?

I have already swapped this phone out once for a new I phone 6. First one I was having same issues with.
Now I got the new one and it was good for about a month and now its doing it to but worse. It freezes completely.
Won't let any of my text messages get through to me. All my messages disappear completely and randomly come back when they feel like it.
This time its frozen where I can't even read any texts or get any texts and when I click on the messenger app it just goes to the NEW MESSAGE and won't let me get out of this screen. Should I once again take this back? or are all the iPhone 6's bad like this?

It's not the iphones, it's more likely one or more of your programs causing this issue. It's not the iPhone 6's. The possibility of you getting 2 bad iphones from different batches is extremely remote or you have the worst luck on the planet. lol If one iPhone has it, then you get a new one and the same problem comes up again, it's most likely due to an issue with a program that you keep getting back from restoring an old backup. Restore the iphone again and set up as a new iphone. Then manually import your music and your photos. Once that's done, try to use your iphone to see if everything is ok. If it works good for a few days, then try to add some of the apps. At some point, you'll end up loading the malicious app and the problem may come back. Make sure that the apps are all updated. If you still have problems, call Apple so that they can run a diagnostic report and find out which app is causing this issue. Then you can simply delete it and/or update the app. More solutions are available but that's all I will post for now.

Droid Turbo cloning calls

My phone records a phantom phone call at the same time when I call a business phone. Verizon did not solve the problem so far. Sim card is replaced. The phone is reset. Still the phantom calls logged in minute call. Do any had this problem and what did you? What do I do?
Thanks.
Byron.

Customer support:
The call cloning happens at the time when I get a business call or making a call to business.
Example:
Calls appear on the call log as-
I called at 9:37AM Minneapolis business 612.... 11 minutes
Cloned call- logged at 9:37AM GRANDPRARI 469-435-5617 -- 11 minutes
This is recurring every day since 1/17/2015. My cell phone sim card was replaced, phone was reset for original status. Cloning calls might be around 400 minutes since 1/17/15. When I call the number, the message is: check the number and call or number is disconnected or not in service etc.
Please help me with a solution.
Thanks.
Byron.

Treo 800W: Missing Calls, Going Directly to Voice Mail

I am at wit's end. My Treo 800W will roll directly to voicemail for no reason. I've gone through my settings to ensure the box that blocks interuptions during data sessions is unchecked. I've made my active sync a manual operation. Yet I still miss 5 or 6 calls a day!
Any ideas?
And I'm not alone. There are others all over the Treo forums experiencing the same problem. Check here: http://discussion.treocentral.com/showthread.php?t=168727
Post relates to: Treo 800w (Sprint)

I have sprint as well and have that issue. I always though it was because of the service provider. Please let me know what feed back you get with regards to this.
Post relates to: None

Button Setting Variable - Text Field Not Updating

Hi,
I am working with Acrobat 9 Pro on Windows.
I am unable to make the following work: When the user clicks a Button, a Text Field appears with the text associated with the Button clicked. I have tried accomplishing this with a variable declared in the Document JavaScripts, buttons setting the value of the variable, and a Text Field containing a Custom Calculation Script that returns the text associated with the value of the variable.
Everything works - except the Text Field doesn't return the text associated with the value of the variable. I have an app.alert (for now) in the button scripts so I can see if the variable has the correct value - and it does - but when the Text Field appears - the text never changes.
What I have observed: if I go back into the Custom Calculation Script of the Text Field and do nothing, go back out, go to Preview, and click on a Button, the text updates to the previous variable value (not the Button variable value I just clicked).
So - I think - the Custom Calculation Script isn't seeing the new variable "on the fly". Even though the app.alerts are. I don't think this is a Field Calculation Order problem. But maybe it is. And this is where my brain power ends. Any suggestions would be greatly appreciated. Thank you.
I have this in the Document JavaScripts:
var ITrig = 1;
I have three Buttons (want to have more) that will set the ITrig variable.
Here is what I have in one Button:
var Inpopup = this.getField("PartASectionIIInstructions")
ITrig = 2;
app.alert(ITrig);
if (Inpopup.display == display.hidden) {
Inpopup.display = display.visible
Inpopup.setFocus();
} else {
Inpopup.display = display.hidden;
I have this in the PartASectionIIInstructions Text Field in the Custom Calculation Script:
if (ITrig == 2) {
event.value = "#2";
else if (ITrig == 3) {
event.value = "#3";
else if (ITrig == 4) {
event.value = "#4";

Thank you. I had tried something like that earlier - without success. That is why I went to the calculation script. So - I went back to the "Acrobat Forms - JavaScript Object Specification" looking for an answer. It finally sunk in I was guilty of this:
var Inpopup = this.getField("PartASectionIIInstructions").value
Inpopup = "#3"
When I should have been doing this:
var Inpopup = this.getField("PartASectionIIInstructions")
Inpopup.value = "#3"

I am missing itunes.msi and can not update my itunes and it will not let me remove and re install. how do i fix this

i am missing Itunes.msi on my computer. it wont let me unistall and re-install - how can i fix this

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Sales order text is not updating

Hi All,
call function 'SD_SALESDOCUMENT_CHANGE'
    exporting
      salesdocument    = salesdocument
      order_header_inx = w_order_header_inx
      simulation       = testrun
      business_object = 'BUS2032'
      call_from_bapi   = 'X'
    tables
      return           = return
      sales_text       = order_text
      textlines_ex     = text_lines.
COMMIT WORK.
I am using above FM for updating Sales order test .I am Passing test in the Prameters      textlines_ex     = text_lines.
I am Unable to dig what the issue is .Can anyone help me out in this .
salesdocument = Sales Document number
Moderator Message: Even we cant help you, with a question like that. Put more effort into framing your questions.
Edited by: kishan P on Jan 9, 2011 6:56 PM

Sounds like a text determination config issue - have you assigned the text in VOTXN? Have you run the text determination analysis from VA02 in the document?

Problem in SE63 Smartform Taranslation.New text is not updating

Hi All ,
we are facing a problem while creating a language translation from DE(German) to EN (English). we gone to
SE63 -->Translation->ABAP Objects ->Other Long Texts ->FS Forms and Styles ->SSF SAP Smart Form. In the feild for Object Name made F4 and selected the smartform name clicked on EDIT .
Here the system showing two windows one for Source language which is not editable and other for target language which is editable.
We given the text "Purchaser Order" in the Target Language and saved it and activated.
But it is not translating to german language which is source.
/E &TED_PO
T4 Purchase Order
Please help us.
Thanks and Regards
CB

have you given the source langauge there.
The process of transalting the smart form test :
GO TO SE63.
lick on Transaltions
then choose R3 enterprise.
then choose other long texts.
choose forms and styles.
click on the + sign choose ssf smart forms .
give your smart form name .
and give the source language and the target language.
This is how u have to translate.
Please let meknow if u have any questions.
Here in the target language you have to give EN.
Edited by: vinay raj on May 27, 2009 3:41 PM

Droid Turbo missing calls, delivering texts late, not capturing call history, not updating e-mails

Similar Messages

Maybe you are looking for