Dropped Call. No Service. Call Failed!

Hi, I have for a number of months experienced these problems with o2 on a number of different handsets. I have been sent a new handset and new sims but it does not make a difference. My question is what has changed? I used to get perfect call quality and great reception at my house, but now it's rubbish and its always rubbish. It is a rare thing now that I can have a full conversation without the call dropping, or unable to hear one side of the conversation. I got told last month it was due to an upgrade on the aerials and I should switch 3g off... (Not really that great as I want 3g) but even so. They said that would be finished at the start of March and all should be ok again. Well it's not! I'm a platinum VIP with o2 and have been on Max contract for over 8 years at least, the service has just gone really down hill! HELP PLEASE!

I feel your pain.... This happens to me constantly, 4 or 5 bar signal - call drops. This happens 5-10 times a day, this morning it has already dropped out 4 times, hence my motivation to rant on O2 forum! I travel all over the country and whilst it is worst at my house, it certainly isn't isolated to one location. I have tried: Different handsets - from iphones to cheap NokiasPlug in signal booster in my officeDisable 3GDisable all dataNew SimStick on signal booster to back of iphone (I was desperate)With a caseWithout a caseNot holding it too tightSmothering my fingers around it!!! The fact remains that calls drop and it seems to have no bearing on my signal level. I also have occasions when I show low levels of signal (2 bars) so try and make a call and hey presto, "searching" appears I really don't know what to try, my company was with Vodafone for a number of years and I did not have this problem, similarly my wife has a T-mobile phone and that's fine too. Really is becoming a massive problem for me and the situation is only getting worse, this has been happening for 2 years now

Similar Messages

No Service, Network or 3G dropping, Call Failed Problems - List here

Dear Apple,
We are apparently very numerous suffering from this problem and can't use our brand new precious phones properly.
Please hear us and fix this issue as soon as possible.
Below is the link for complaints.
http://www.apple.com/feedback/iphone.html
Thanks!

The situation resolved on its own 24 hours later.
Must have been an issue with the AT&T network in this area...

Iphone 4 constantly dropping calls or "call failed"

I've been having nothing but trouble the past couple weeks with dropping calls or getting the "failed call" showing up when trying to make a call. It happens more times than not and i spoke with Apple today and was told that after you try all the resets and restore options it should be fine. If that doesn't work, its more than likely a SIM card issue and needs to be cleaned or replaced. I did all the restore and backup and all the other garbage they advised me to do, and still did not work. Took the SIM card out and im not sure if its supposed to sparkle in the light, but its pretty **** clean. Re-inserted it, and still dropping calls or "call failed". Next option is getting a new SIM card tomorrow and i'll update what i find out.
Previously, in July, some moron from Canada was beaking how its a service issue and he's on Rogers network, blah blah blah and he's never dropped a call and its superior to AT-T and mentioned something about how all the ppl would have no trouble if they were on the Rogers network.
Well i'm from Canada and work with 2 other ppl, surprise, from Canada who are having the same problem with the iphone 4........its not a network thing whatsoever, because ppl on Telus and Rogers are having the same problem. Im assuming he was from Toronto where the center of the universe is and he was basically just being an idiot, so for that moron, i apologize to ALL who are having issues with the iphone 4 and hopefully Apple gets their act together and solves this issue!!

Hey everyone, I think I finally got the solution for this. It appears to be a NETWORK ISSUE with the phone provider. I am a Telus subscriber and after speaking to a cool tech guy from Calgary named "Corey", he performed the following task:
He told me he had to reset 4 settings on the network for my account. A few of which were under something called "STF viewer" "PLMN" and "PRL"...
Aftewards, I had to go to my iphone: General > Reset > Reset network settings
I am now able to complete phone calls (and apparently my reception sounds better to my call recipients/callers too). The problems is not related to a "faulty device" or "something" you did... If the problem happens again, I'll call my provider and have them investigate the ticket further as it could be a bigger network issue (with GSM) but chances are it just requires a simply settings reset on the backend of your provider's data support team.
After doing the reset, all I had to do was reconfigure my wifi password. No other settings were lost. (and more importantly, I didn't have to re-restore my iphone, didn't have to go to Apple and sound like one of those "iPhone 4 vs HTC cartoon characters" and didn't have to yell like a child to anyone. Just be cool when you call your provider's tech people, these guys are good hard working people and will help you and will have a better chance at success if they empathize with you and don't feel annoyed by you (I'm in IT, I know how it is).
I was also told that if I had to call back and if they had to reinvestigate, the next steps would probably involve having my SIM card changed but based on the previous tech's experience, it would be highly unlikely. I will update you further should I encounter any further issues. Just don't be hating on the iPhone 4 as most people do coz it is a sweet device if you can understand the tech specs behind the underlying issues.
Hope this helps you guys and anyone else who got frustrated by this problem!

Dropped calls and no service in my house...why am I even paying a phone bill?

I've been a Verizon customer for probably around 6 or 7 years now. I've had plenty of different devices and was always happy with my phone. A few years ago, service started to get horrible in my house. I would barely get service and my phone would drop calls. I have spent hours over the past 2 years on the phone with reps. Some were very helpful, and some were very frustrating. I have put in service tickets and even changed out my phone to try to get better service. Let me also note that AT&T customers get perfect service inside of my house. I don't even want to hear the excuse that Verizon doesn't guarantee service inside of a building due to building materials. The last time I checked, I didn't rebuild my house in the past few years with new materials. I use my cell phone for business when I'm at home, so it is extremely important that it works inside my house. I put my most recent service ticket in almost 2 weeks ago and there is STILL no resolution. I also won't accept if the only resolution is me buying a network extender.. I'd rather pay an early termination fee and leave before I'd ever spend money on another Verizon device. I have had 2 reps in the past week tell me that they would call me back and I never hear anything. I also have been told that they would resolve it by a certain date, only to find out that now they are saying it's going to stay open until they can figure it out. I rely on my phone for work now more than ever since I recently starting working from home, so how can I accept the fact that I am waiting around and paying for a phone that doesn't work when I need it the most? For all of my trouble, they offered me a $20 credit on my account. I shouldn't even use the word "offered" because I was the one who mentioned that I should be reimbursed for my time. I'm so sick of wasting my time on the phone and I am truly disgusted with Verizon. As a long time customer who has spent thousands of dollars over the year paying for Verizon service, I would expect to be treated much better than this.

I am not in the same boat, Verizon works absolutely everywhere I go and I am super happy with the service. If the service started not working however, and I got no resolve, I would just cancel it and switch providers. No point in paying for service you can't use, especially where you live.

Thanks this was very useful.. I have a brand new iphone 4s unlocked version from singapore and I am having the same problem constant network fluctuations, no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/ba

I have a brand new iphone 4s unlocked version from singapore and I am experiencing constant network fluctuations on my iphone , no service, call failed, invalid sim, sim failure, bars fluctuating from 5 - 3 - 2 - 1, no signal/bars searching etc... Ifeel miserable after trying out all the options changed multiple sims, tried multiple carriers, restored the phone back and have set-up as new device but the problem does not get solved... its is so frustrating that after investing on a world's most expensive phone you cannot enjoy the calling features which the phone offers which is the main thing you own the phone for.. Rest of the things are working.. The funniest part I am not able to make calls or receive calls but can access the internet.. I have tried every possible thing and really very frustrated with this iphone of mine...I hope the problem gets solved.. would anyone have any solutions to this problem.. Does it mean one should never update software as I hear that after updating to IOS.5.1 the problem has started coming and same has been with there.... Apple says its a hardware failure which is very difficult to digest as sometimes I get 5 bars and able to make and receive calls but 95% of the time I am unable to. If anyone has any solution I will be very happy if he or share can share the same. Many thanks. its so disgusting to experience this on top of this apple does not support global warranty for the phone as you need to go to the country from where you bought the phone for replacement.. Truly sad state of affairs.. very very very dissappointing.

Have a look at this it might help
http://support.apple.com/kb/TS4148

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had t

We have had Verizon Wireless service since 2007. We have 6 lines on our account. Unfortunately in 2012 when I (903.647.0073) upgraded from the iPhone4s to the iPhone 5 I started having reception problems. I started having dropped calls in my home. I had to go outside to get reception without dropped calls. I was told that because of metal in my home I would have to purchase a Network Extender for $250. And we HAVE not metal in our home. AND our other lines all work fine. I felt this was ridiculous. We already pay $350+/month for service and I should NOT have to purchase additional equipment for a service that I already pay for. The manager of our local store at the time gave us at no cost a Samsung Network Extender. It worked beautifully until about a month ago. I went to our local Verizon store and was told that I would have to purchase an extender. THIS is RIDICULOUS. We have been loyal customers for over 7 years and have been very satisfied with our service. Unless this issue can be resolved without purchasing an extender we will be switching our service as our lines come up for renewal. I regret this as we have been very happy with our service. But we should NOT have to purchase anything extra for one line that will not get good reception. Again, we pay $350+/ month for a service that does not work properly, simply RIDICULOUS! Currently the "sys" light flashes red (slow) and the GPS light remains red. Please help this very frustrated customer.

Regardless with what carrier your with you might have the same issue, My recommendation would be to get a router that will help you with viewing live traffic and keep a tally of your usage and any device connected to your internet connection. You can go with the peplink balance 20 and be able to look at your traffic by the hour, daily, weekly, monthly or yearly. Look for trends, see what computers or devices are doing what I attached a screen shot so you can see an example of mine. You can purchase the router at 3gstore
http://i45.tinypic.com/6zc674.jpg

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service

I have been a customer with Verizon, since 1996. Recently, my husband has been added onto my account. We have both been experience drop calls. My husband contact Tech support for over 2 weeks. We were pretty upset to be paying a lot of money for a service that didn't work. Verizon advised us that would upgrade both of our phones (to see if that solved the problem). Ok...this is where Verizon has forgotten customer service rules. He order 2 phone...one for himself, one for me. 1st the wrong address on the package..Fedex couldn't deliver...2nd...missing condo number Fedex couldn't deliver again...(2nd call to Verizon)...3rd package was finally deliver with 1 phone...missing my phone. Contacted verizon rep...reorder my phone again..but sorry we cannot give the same price as quoted on 21April...even though...its our mistake...Ok...Ok..what a surprise..but we can do this...after 65 minutes...found a price that was a little bit more...fine...just order the phone....I reordered phone on 28April...on the April 29...no email..so I can Verizon for the 4times in a few days..sorry your order was delay due to our Fraud dept. OK...talked to fraud dept...ok..account is good..will release phone and ship. OK...Next day, no email with deliver confimation. Contact Verizon 5 times now...sorry..your order was cancelled...YES...cancelled again...2nd time now...but we can reorder...OK...sorry but we cannot honor that price that was quoted..really...agent messed up...again...but we can do this for you....I don't understand...your mistake...ALL the times...
Strange ...how my order gets cancelled twice by Verizon's mistake....yet you cannot honor prices that your agents quoted!!!
I didn't reorder the phone....I cannot in good faith same with a company that does not stand behind their own mistakes...and worse...they make the poor customer pay for it...
I will not be renewing my contact...its time to Cricket Wirless...which my sister-in-law loves for half the cost....

I hope that you aren't complaining about dropped calls INSIDE your condo because no amount of switching or upgrading devices will solve that.
VZW will not guarantee service inside of any structure. There are just too many factors. If the problem is inside then you might want to look at one of the following:
1.) Network Extender (may cause issues for others in a condo or apartment style setting)
2.) A Google Voice Number (Free with a Gmail email address), downloading Google Hangouts Dialer and forwarding your calls to the GVN so that you can make and receive calls over Wi-Fi.

Web services Connection_Operations.Logon call fails on Data Services 4.0

Hello,
We recently installed Data Services 4.0. We have a custom Java app which makes use of the web services interface. We had previously used Axis to generate the java class. With DS 4, it looks like the Logon method did change as it now requires the cms system and authentication. We manually updated the java classes to includes these, which has been our general approach in the past for newer releases. However DS 4 uses Axis2 and I'm not sure that this approach would work.
My problem is that the "Logon" call fails with very little details.
In viewing both the webadmin.log and WebService.log it only reports the following:
11/02/2011 18:42:17 [ SEVERE ] Logon failed. Error: null
I understand that I can control the logging detail . The Integrator Guide for DS 4.0, has the following instruction, yet there is no log4j.properties file on my system?
"To control the level of detail in the webadmin.log file, you must edit the log4j.properties file.
The properties file is located in:
LINK_DIR\ext\webserver\webapps\acta_web_admin\WEB-INF
To obtain a debug trace of events, change the log level from the default of INFO to DEBUG. For example,
log4j.rootLogger=DEBUG, A"
Any advise would be greatly appreciated
Thanks

Hello,
Unfortunately, stdout.log below doesn't show anything possibly due to some mis-configuaration of log4j.properties. In my previous post I requested info on which log4j.properties should be modified as the documentation in the DS 4.0 Integrator's guide mentions a none-existent path?
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN No appenders could be found for logger (com.sun.faces.config.ConfigureListener).
log4j:WARN Please initialize the log4j system properly.
com.businessobjects.webpath.rebean3ws.Activator
log4j:WARN No appenders could be found for logger (org.apache.commons.digester.Digester).
log4j:WARN Please initialize the log4j system properly.
null

Error Creating VM on 2011 iMac - The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).

I am running Hyper-V in Windows 8.1 on a late 2011 27 inch iMac. Whenever I try to create a virtual machine I get the error below and Windows warns that it will restart in 1 minute. I tried a clean install of Windows, but my PC still crashes ever
time I try to create a VM. I was able to successfully use Hyper-V in prior versions of Windows on this same PC. Any clue as to what is going on? A driver? Windows 8.1? Mac Hardware related?
I see the following two entries in event viewer but have no other clue as to what is happening:
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16000
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The Hyper-V Virtual Machine Management service encountered an unexpected error: The remote procedure call failed. (0x800706BE).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066F867-7CA1-4418-85FD-36E3F9C0600C}" />
    <EventID>16000</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.770451300Z" />
    <EventRecordID>58</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<UserData>
    <VmlEventLog xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/Windows/Virtualization/Events">
      <ErrorMessage>%%2147944126</ErrorMessage>
      <ErrorCode>0x800706BE</ErrorCode>
    </VmlEventLog>
</UserData>
</Event>
Log Name:      Microsoft-Windows-Hyper-V-VMMS-Admin
Source:        Microsoft-Windows-Hyper-V-VMMS
Date:          1/10/2014 10:48:46 AM
Event ID:      16010
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      Charles-PC.CHARLESPOOL.local
Description:
The operation failed.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Hyper-V-VMMS" Guid="{6066f867-7ca1-4418-85fd-36e3f9c0600c}" />
    <EventID>16010</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T15:48:46.773497100Z" />
    <EventRecordID>59</EventRecordID>
    <Correlation />
    <Execution ProcessID="2488" ThreadID="8704" />
    <Channel>Microsoft-Windows-Hyper-V-VMMS-Admin</Channel>
    <Computer>Charles-PC.CHARLESPOOL.local</Computer>
    <Security UserID="S-1-5-18" />
</System>
<ProcessingErrorData>
    <ErrorCode>15005</ErrorCode>
    <DataItemName>Parameter0</DataItemName>
    <EventPayload>
    </EventPayload>
</ProcessingErrorData>
</Event>

Hi CharlesPool,
I am assuming that the win8.1 is in-place updated from win8 .
Maybe you need to check the state of hypervisorlaunchtype .
If it is off , please run command " bcdedit /set hypervisorlaunchtype auto "
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Event ID: 5014, 5004 The DFS Replication Service is stopping communication with partner / Error 1726 (The remote procedure call failed.)

I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP    10.x.x.x:53            0.0.0.0:0
LISTENING       1692
[DFSRs.exe]
TCP    10.x.x.x:54669
10.x.x.x:5722          TIME_WAIT       0
TCP    10.x.x.x:54673
10.x.x.x:5722          ESTABLISHED     1656
[DFSRs.exe]
TCP    10.x.x.x:64773
10.x.x.x:389           ESTABLISHED     1692
[DFSRs.exe]
TCP    10.x.x.x:64787
10.x.x.x:389           ESTABLISHED     1656
[DFSRs.exe]
TCP    10.x.x.x:64795
10.x.x.x:389           ESTABLISHED     2104
Receiving Member:
[DFSRs.exe]
TCP    10.x.x.x:56683
10.x.x.x:389           ESTABLISHED     7472
[DFSRs.exe]
TCP    10.x.x.x:57625
10.x.x.x:54886         ESTABLISHED     2808
[DFSRs.exe]
TCP    10.x.x.x:61759
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61760
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61763
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61764
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61770
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61771
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61774
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61775
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61776
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61777
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61778
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61779
10.x.x.x:57625         TIME_WAIT       0
TCP    10.x.x.x:61784
10.x.x.x:52757         ESTABLISHED     7472
[DFSRs.exe]
TCP    10.x.x.x:63661
10.x.x.x:63781         ESTABLISHED     4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR   957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.

I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful.

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)

SharePoint SiteMialbox failed with 503 error (AutoDiscover.svc web service call failed)
I followed Technet articles to configure SiteMailBoxes in our environment & exchange sever.
When we created Sitemailbox in a SiteCollection &when we try to open it, it failed with below error.
Site Mailbox
We are having trouble connecting to Exchange Server
The server might be temporarily unavailable. Please check back on this page in a few minutes. If this problem persists, please contact your system administrator.
Correlation ID: bb0fe99c-6f4e-e084-b191-881fbf0fa977, Error Code 10
ULS Log (503 error)
Autodiscover Diagnostics Response Headers: request-id: 95d12ceb-283e-4495-b28b-256503fd097c client-request-id: 742fe69c-ef5a-e084-ca05-6098c759c584 X-CalculatedBETarget: devapwxyz01a.devap.mydomain.com X-FEServer: DEVNAABCD01B
Content-Length: 0 Cache-Control: private Date: Tue, 03 Feb 2015 18:53:40 GMT Set-Cookie: X-BackEndCookie=; expires=Sun, 03-Feb-1985 18:53:40 GMT; path=/autodiscover; secure; HttpOnly Server: Microsoft-IIS/8.5 X-AspNet-Version:
4.0.30319 X-Powered-By: ASP.NET
742fe69c-ef5a-e084-ca05-6098c759c584
if I am correct, X-CalculatedBETarget supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com. Do you guys have any idea on this? (I verified
the same using fiddler, it is failing right at autodiscover.svc call.)
I wrote a powershell script to connect autodiscover service in sharepoint server & this web service call able connect right server X-CalculatedBETarget. It gave the expected response.
I am not sure why SharePoint webservice call (X-CalculatedBETarget) is going to different server?
let me know if you guys have any ideas.
Thanks.

Thanks for the Response Raj.
I already followed the same instructions in the Links.
When SharePoint Autodisover.svc webservice send a request to Exchange server & Exchange server redirecting that request to different server, this is the problem i am facing right now.
X-CalculatedBETarget
supposed to be DEVNAABCD01B.devna.mydomain.com but it connected to different domain devapwxyz01a.devap.mydomain.com.
Let me know if you have any suggestions?

Web service Call failed

Hi,
When I try to post some messages to Web service, Follwing Error displayed is the Receiver SOAP communication channel,
No description available except the following message
Requet entering and Call failed.
What could be the problem?
How can test the connectivities between XI server and Web server?
Edited by: Prabu M on Jul 30, 2008 9:11 AM

Hi,
Just check the link. This describes the step by step method for webservice to file. May be it will be helpful for you.
RFC -> XI -> WebService - A Complete Walkthrough (Part 1) -
RFC-Webservice Part1
RFC -> XI -> WebService - A Complete Walkthrough (Part 2) -
RFC-Webservice Part2
Regards,
Nutan

We used to have great service, now it sucks! Constantly dropping calls, dead areas that have never been dead. Getting fed up and getting no help from Verizon.

This is really getting old, no help from Verizon. Service was great 2 years ago now it sucks, Constantly dropping calls, dead areas where there used to be fine. What is verison doing to help this???

I have an iphone 5s, my husband has a casio, my sister in law has a Samsung, my friends have various phones we are all experiencing the same thing – dropped calls, no service and it is outside as well as inside the house or the car. At our residence and along the drive to work or to the store. I don’t text much or use my data much so I am mostly concerned with the telephone service.
Every day may not be good, but there's something good in every day. Author Unknown
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

Supplementary Service error: general error/ Call failed

Hi, guys please help, am very frustrated as I am not able to make or receive any calls or sms's. Everytime I try, i receive an immediate message saying " supplementary service error. or "call failed". When everybody else calls me it goes straight to voicemail.
I tried the battery pull, I did the security wipe, I called the service provider, nothing seems to work. has any of you ever experienced this? what did you do? please advice.
Under "manage connections" on the main menu, i checked the "service status" and it says not connected under "mobile voice". Other applications work very well, such as facebook, whatsapp, bbm and google talk.

Hi Makhasane
Welcome to BlackBerry Support Forums
There are no specific workaround regarding this error but From what I have noticed in most cases this " supplementary Service error " is resolved after replacing a new SIM , So I prefer you should try that option Or if your device is still under warranty contact your service provider.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.

sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
but it does not work.
Plz give the exact soln to solve this error.
So when you tried starting SQL server service it gave the error right ? or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear. As far as I read your question it has something
to do with permission. Close SSCM window and this time right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Javascript web service calls fail after 10.1.5/11.0.01 updates

* Update #2 - I've confirmed that we are seeing errors because the HTTP request is being made as a POST using 10.1.5/11.0.01 in Chrome/Firefox/Safari. Accessing the same file in IE, the request is made using a GET. Using Reader 9.5.0 in Chrome also uses a GET. Can someone please explain why the HTTP request is being submitted as a POST following the 10.1.5 update?
* Update - I have found in my web service log that it is failing with a message that the attempted POST method is not allowed. Could the Reader updates be causing this call to be made as a POST when it was previously a GET?
I am using PDFs with Reader Extensions enabled that make web service calls via javascript. These calls have been working correctly in multiple environments for months and only began failing with the latest updates. After the latest Reader updates, these calls fail when using Chrome, Firefox and Safari.
Internet Explorer works correctly. Saving files locally and opening them in Reader also works correctly. It is only running 10.1.5 or 11.0.01 in these specific browsers where this issue occurs. 10.1.4 and 11.0.0 do not experience this issue in any browsers.
I have tried disabling Enhanced Security and updating Trust Manager to allow Internet Access from PDFs. Neither change corrected the problem.
Can someone tell me what may have changed in 10.1.5/11.0.01 that would cause these calls to start failing?
The javascript at issue looks like this:
var serviceKeyResult.rawValue = Get(serviceKeyUrl)
The error we get is "Error: Error attempting to read from file: {URL}"

Thanks for pointing that out. The javacript was implemented by a third party, so I was not aware that the function wasn't part of the standard APIs. I'll get more detail on what is happening inside that method.
For now we have updated our web services to accept both a GET and a POST to avoid this issue.

Dropped Call. No Service. Call Failed!

Similar Messages

Maybe you are looking for